Telehandler / Telescope Forklift

Manitou MT1440

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,253 h, load capacity: 4,000 kg, lifting height: 13,530 mm, fuel type: diesel, mast type: telescopic, construction height: 2,450 mm, power: 56 kW (76.14 HP), fork length: 1,200 mm, drive type: Diesel, Telescopic forklift, rigid frame Bdjdpsz Hg Naefx Aa Ijh Load center: 500 Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Rear tire type: Pneumatic Description: MANITOU telescopic forklift MT 1440 EASY, year of manufacture: 2021, 3253 operating hours according to the meter. Load capacity: 4000 kg, lifting mast: telescopic, lifting height: 13530 mm, overall height: 2450 mm, fork length: 1200 mm, tires: pneumatic, engine: 4-cylinder Deutz diesel with 55.4 kW power - Stage V. Fork positioner, cabin with heating, radio and air conditioning, level adjustment, road traffic lighting, work lights, rotating beacon, 3 steering modes. VERY GOOD CONDITION!! NEW SERVICE!! Fork positioner, Cabin with heating, radio and air conditioning.

Condition: used, Year of construction: 2020, operating hours: 521 h, Internal vehicle number: VTC30048 Available immediately. More information at: Luis Lucena Viktoria Sologubova Manitou MHT 10180 heavy-duty telehandler – 18-tonne lifting capacity – 521 operating hours High-performance Manitou MHT 10180 heavy-duty telehandler, manufactured in 2020, with just 521 operating hours. The machine offers a maximum lifting capacity of 18,000 kg, a lifting height of 9.63 m, and is equipped with a hydraulically adjustable fork carriage and pallet forks. Technical data: * Vehicle number: VTC30048 * Vehicle condition: Used machine * Category: Telehandler * Manufacturer: Manitou * Model: MHT 10180 * Series: 129M ST4 S1 * Year of manufacture: 01/2020 * Model year: 2020 * Operating hours: 521 hours * Maximum lifting capacity: 18,000 kg * Maximum lifting height: 9.63 m * Maximum reach: 5.56 m * Unladen weight with standard forks: 24,000 kg Bdedpfxoza Nq Re Aa Ish * Technical inspection: New * CE marking: Present Engine and drive: * Engine manufacturer: Mercedes-Benz * Engine type: OM 934 LA * Emission stage: Stage IV/Tier 4 Final * Cylinders: 4 * Displacement: 5,100 cm³ * Power: 129 kW (176 hp) * Maximum torque: 750 Nm at 1,600 rpm * Transmission: Hydrostatic * Forward/reverse gears: 2/2 * Maximum travel speed: 25 km/h * Traction force under load: 15,970 daN * All-wheel drive * All-wheel steering * Automatic negative parking brake * Hydraulic service brake Hydraulic system: * Variable hydraulic pump * Hydraulic flow rate: 205 l/min * Hydraulic pressure: 350 bar * Hydraulic oil tank: 290 liters * Hydraulically adjustable fork carriage Dimensions: * Overall length with implement carriage: 6.65 m * Overall width: 2.52 m * Overall height: 3.00 m * Wheelbase: 3.75 m * Ground clearance: 0.44 m * Turning radius (outer radius): approx. 5.50 m * Tilt angle: 12° * Dump angle: 105° Capacities: * Fuel tank: 315 liters * AdBlue tank: 63 liters * Hydraulic oil: 290 liters * Engine oil: 21 liters Cab and safety: Enclosed ROPS/FOPS cab, Level 2 Safety system according to EN 15000 JSM joystick control All-wheel steering Rotating beacon Work lights Cab protection grille Large-dimensioned off-road tires Noise level at the driver's seat: 80 dB(A) External noise level: 107 dB(A) Attachment: * Manufacturer: Manitou * Type: PFF + POS + DL * Serial number: 53010702 * Year of manufacture: 2019 * Self-weight: 1,900 kg * Rated lifting capacity: 14,000 kg * Load center: 1,200 mm * Hydraulically adjustable fork carriage * Pallet forks included Inspection and functional test possible by prior arrangement. Further information, photos, load charts, and videos are available upon request. Errors, changes, and prior sale reserved.

Condition: used, Year of construction: 2023, load capacity: 4,000 kg, lifting height: 13,530 mm, total length: 7,360 mm, - Max. Tragkraft 4000 kg - Max.Hubhöhe 13.53 m - Maximale seitliche Reichweite 9.46 m - Ausbrechkraft mit Schaufel 7400 daN - Gesamtbreite der Kabine 0.89 m - Kippwinkel 12 ° - Schüttwinkel 114 ° - Wenderadius (über Räder) 3.94 m - Eigengewicht (mit Gabel) 10855 kg - Gewicht 10900 kg - Bereifung Pneumatisch - Reifenmodelle Alliance 400/80 - 24 - 162A8 - Gabeln Länge / Gabeln Breite / Gabelquerschnitt 1200 mm x 125 mm x 50 mm - Heben 16 s - Senken 12.40 s - Teleskop ausfahren 17.30 s - Teleskop Einfahren 13 s - Ankippen 4 s - Auskippen 4 s - Hersteller Deutz - Motornorm Stage V / Tier 4 final - Motor Modell TD 3.6 L - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3621 cm³ - Nennleistung Verbrennungsmotor - Leistung 75 Hp / 55.40 kW - Max. Drehmoment / Motordrehzahl 340 Nm @ 1600 rpm - Zugkraft 8320 daN - Getriebetyp Drehmomentwandler Bjdpfx Aozcra Hsa Isdh - Anzahl der Gänge (vorwärts / rückwärts) 4 / 4 - Max. travel speed 24.90 km/h - Parkbremse Automatische Parkbremse - Festellbremse Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Pumpenart Zahnradpumpe - Hydraulikfördermenge / Hydraulikdruck 106 l/min-270 bar - Motoröl 7.50 l - Hydrauliköl 135 l - Fassungsvermögen des Kraftstofftanks 140 l - Geräuschpegel im Fahrerstand (LpA) 79 dB - Umgebungsgeräusch (LwA) 102 dB - Schwingungsbelastung Hand/Arm < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Antriebsräder (vorne / hinten) 2 / 2 - Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 2 - Steuerungen JSM

Condition: new, Year of construction: 2024, Equipment: all wheel drive, soot filter, Manitou MT1440 ST5 Easy Comfort Telehandler rigid 4t 14m The MT 1440 Easy telehandler is designed for construction sites requiring high lifting heights. With a lifting capacity of 4 tonnes, it enables safe placement of pallets at heights of up to 14 meters. This robust machine is equipped with a sheet metal-clad low door and an electric window to minimize breakage risks. The cab offers excellent visibility for the operator to continuously monitor site operations and track the load to its set-down point. The MT 1440 can be easily transported between job sites thanks to numerous lashing points, and adapts to any terrain with 42 cm ground clearance, 3 steering modes, and 4-wheel drive. Bjdpfx Asxmqw Roa Iedh Maximum load capacity: 4000 kg Maximum lifting height: 13.53 m Maximum outreach: 9.46 m Breakout force with bucket: 7400 daN Overall length with carriage: 6.02 m Length to fork face: 6.13 m Overall width: 2.36 m Overall height: 2.45 m Wheelbase: 3.07 m Ground clearance: 0.37 m Cab width: 0.89 m Tilt angle up: 12° Tilt angle down: 114° Turning radius (over tires): 3.94 m Own weight (with forks): 10,855 kg Weight: 10,900 kg Tyres: 400/80 - 24 - 162A8 Engine: Deutz Stage V, Tier 4 final TD 3.6 L Cylinders: 4 - 3621 cm³ Engine power (hp/kW): 75 hp / 55.40 kW Max. torque / engine speed: 340 Nm @ 1600 rpm Tractive force: 8,320 daN Transmission: torque converter Number of gears (forward/reverse): 4 / 4 max. Maximum travel speed: 20 km/h Automatic parking brake Oil-immersed disc brakes on front and rear axles Hydraulic pump type: gear pump Hydraulic flow rate / pressure: 106 l/min - 270 bar Hydraulic oil capacity: 135 l Fuel tank capacity: 140 l Steering wheels (front/rear): 2 / 2 Drive wheels (front/rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R63 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Bdjdpfx Aajfpb Nms Ijh Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Bjdpfxjw I U Drj Aa Iedh Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Bedpfxsy Dd Igj Aa Isdh Location: Nattheim

Condition: like new (used), Year of construction: 2005, I sell the vertical band saw mill Primultini SGD, Year 2005, line almost with zero working hours. Bedpezkb R Nsfx Aa Iedh Canali carriage mechanic + pneumatic. Compressor with air tank included. Sharpening workshop included. Condition like new. Available immediately.

Condition: used, Year of construction: 1997, Column reach: 630 mm Bdedpfx Aaswbqi So Ioh Feed rate: 7 m/min

Condition: good (used), functionality: fully functional, fuel type: diesel, color: green, empty load weight: 8,650 kg, lifting power: 3,800 kg/m, lifting height: 12,600 mm, mast type: telescopic, Year of construction: 2017, Equipment: cabin, pallet forks, ID111069 MACHINE: Telescopic handler BRAND: Merlo MODEL: P38.13EE Panoramic YEAR: 2017 ENGINE: Diesel OPERATING HOURS: unknown TRANSMISSION: automatic DRIVE: 4WD MAST: Telescopic CAPACITY: 3800 kg LIFTING HEIGHT: 12.6 m TYRES: Standard Bdjdpfxozhmz Ij Aa Ioh CONDITION: Good