Used Wsm Automation Schraubstation for sale (13,604)

Year of construction: 2013, condition: good (used), For Sale: Well-maintained in-line system for use behind a Multivac packaging machine. This in-line system ensures a transition from 4 tracks to 1 track and subsequently passes through a metal detector with an ejector. Brand: Automation Systems BV Type: Automation Systems BV in-line robot with a Mettler Toledo metal detector with ejector Robot type: BCE001 Year of manufacture: 2013, voltage: 400 V, 16 A It is possible to inspect this machine on-site. - Transport can be arranged. - Export documents will be provided if necessary. - Proper loading is included. Bjdpjzt Ib Tjfx Ac Tswt If you have any questions or comments, please do not hesitate to contact us.

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. Bwodpjibichofx Ac Tst If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Bwodpox Elkfjfx Ac Tst Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Bsdpfx Acsx Elfco Tjwt Aluminum chassis with plexiglass enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Bsdeya H S Sepfx Ac Tjwt Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar Bwsdpszwdx Nofx Ac Tjt EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Year of construction: 2023, operating hours: 5,027 h, condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, We are offering this very well-maintained Halter CNC Automation Millstacker Premium 25 handling robot for CNC milling machines, year of manufacture 2023, with very low operating hours. Custom modifications deviating from the standard model that were carried out for us: Bwjdpfxsy Nmmio Ac Tet 1. An individual deposit position (in our case, onto a chute into a water bath) was added as an option. This setup also allows all 12 stacking positions to be loaded with raw parts—whereas when depositing onto the table, only 11 stacking positions can be loaded with raw parts. 2. Customized adjustment of the angular alignment in the magazine. As a result, longer/larger parts can also be placed lengthwise between the bars when diagonal placement is no longer possible. 3. An additional set of longer support bars was manufactured to securely position larger parts. If you have any questions or require more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: DA710219, overall weight: 430 kg, load capacity: 10 kg, For sale is a linear Cartesian robot for injection molding machines, manufactured by Star Automation Europe in 2019. The sale includes only the robot itself (mechanical arm and remote control), without the surrounding enclosure, hoppers, or conveyor belts. It is ideal for pick-and-place operations, part extraction, and assisted placement. Technical Specifications: Brand: STAR AUTOMATION EUROPE S.p.A. Model: XW-1000VI 2V Product Code: DA710219 Year of Manufacture: 2019 Certification: Original CE marking Compatibility: Optimized for injection molding machines ranging from approximately 150 to 250 tons (originally used on an Arburg 520). Bwedpfx Acozw Hy Ae Tjt Included in the offer: - Cartesian robot body with 3 linear axes. - Original operating panel (remote control) for cycle programming. - Original user manual and electrical diagrams for the robot. Machine Condition: Used, in excellent mechanical and electronic condition, carefully disassembled.

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Bsdpfsxvxqdox Ac Tewt Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Bedjzhub Ajpfx Ac Tswt Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 Bedpeyylqbofx Ac Towt LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 Bwsdpfx Aezd Rmgsc Tet System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. Bjdpfxjxwvruo Ac Tjwt The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: good (used), Year of construction: 2008, CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, CNC control -Type: PA8000 LW -Dimensions: 330/250/H130 mm -Weight: 5.9 kg Bwsdpfx Ajwubtnjc Tst

Condition: used, Year of construction: 2012, Packaging system: automatic bag feeding, label printing, bagging, folding, sealing and sorting into storage magazines, processing: round single-vision lenses with 60mm-80mm diameter, max. positive power: +14D, min. negative power: -12D, max. cylinder: 4D, prism: 5cm/m, max. prism value at the measurement point: 10cm/m, diameter measurement accuracy: 0.25mm, sphere/cylinder measurement accuracy: 0.02D for measured values up to 6D, 0.03D for measured values up to 14D, prism measurement accuracy: 0.02cm/m + 1%, center thickness measurement accuracy: 0.04mm, output: approx. 800-900 lenses/h, measuring system: FOCOVISION, rotary table: 6 positions. Machine weight: 1450kg, documentation available. Inspection possible by arrangement. Bwsdozun Tfopfx Ac Tst

Year of construction: 2023, operating hours: 10 h, condition: new, functionality: fully functional, Here we offer a machine that was specially developed for fixing loose or cracked branches. The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement • Easiest operation DIAGNOSIS AND CORRECTION • Rotten branches • torn branches Bwsdpfx Acjpiufwj Tot • Resin galls • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Bwodpfxjk Abwls Ac Tst Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fully automated robotic cells for different industries having main components: product preparing / aligning belt, Fanuc robot unit (different type based on application requirement), robot stand, robot gripper, roller / belt conveyor for final product. Machines are controlled by HMI interface no need to know robot programming code to operate the machines. We develop applications for staking, transferring , palletizing, sorting, pick and place, group and insert into boxes for bags, buckets, bottles, boxes, cans,etc. Each robotic cell can be upgraded with industrial vision system , labeling systems, marking systems and also software for monitoring production. Bsdouvg Ahjpfx Ac Tswt

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: Zeroclamp Zerobot 100P automation system, commissioned in 2015. (Perfectly suited for a Haas UMC 750, but also compatible with other machine types.) This automation system allows for either vice handling or raw part handling. Offers completely flexible configuration options. Large workpiece storage for many raw parts (fully customizable). Compact footprint. Features: * Various mounting plates for raw part handling * Raw part gripper * Second rack for increased part capacity * and much more Bwsdpsyk D Dysfx Ac Tot This solution enables both raw part and clamping device handling. There are numerous possible applications, and we are happy to provide advice.

Condition: good (used), Indumat THO 310 Automated Guided Vehicle (AGV) A robust, industrial automated guided vehicle (AGV) from the proven system portfolio of INDUMAT and E&K Automation. The vehicle combines Indumat’s extremely solid and durable mechanical engineering with the flexible control technology of the TELETRAK MULTI series. The unit is ideally suited as a source of spare parts, for retrofit projects, for automating internal facility processes, or for expanding existing systems. Technical Data (according to nameplate): Manufacturer (Mechanical): INDUMAT GmbH & Co. KG (Reutlingen) Control System / Brand: E&K Automation TELETRAK MULTI Model / Type: THO 310 Unit No.: 9930 92 26844 Year of Manufacture: 03/1993 Load Capacity: 1000 kg Dead Weight (without battery): 2720 kg Nominal Battery Voltage: 48 V Equipment & Components: The vehicles were subsequently upgraded with modern touch-display controls and are in good, clean condition. These vehicles are constructed using high-value, sought-after industrial components of OEM quality. Bodpfxszkqdxe Ac Tswt Professional Safety Laser Scanners: High-end sensors for personnel and obstacle detection. Load Handling Device: Integrated, powered roller conveyor featuring three flanged guide rollers for the automatic, centered pickup and transfer of specific load carriers (e.g., pallets or special racks). Control & HMI: Side-mounted control panel featuring a display, key switch, function buttons, indicator lights, and a connection port for a wired handheld control unit. Safety Features: Easily accessible emergency stop switch; Cutouts in the bumper area for optical pedestrian protection scanners (e.g., SICK laser scanners) or mechanical safety edges. Control cabinet: Spacious electronics compartment for the central control system, located in the upper housing section and accessible via lockable double doors. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Year of construction: 2012, condition: used, Two large and four small autonomous industrial vehicles are available, 1) 2x large clamp-type industrial vehicle, axle distance, front-to-rear: 2255mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3999mm, width: 2674mm, height (mast lowered): 3841mm, weight (without battery): 7,45t. 2) 4x small V-Shape industrial vehicle, axle distance, front-to-rear: 2026,5mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3367mm, width: 1920mm, height (mast lowered): 2295mm, weight (without battery): 2,7t. An on-site inspection is possible. Bsdpfxjzun Uce Ac Towt

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Bwodpfey Su A Rox Ac Tst

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller Bodpfx Aewt Rzloc Towt -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece

Condition: good (used), CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg Bedpfewt R Irjx Ac Tewt

Condition: new, Year of construction: 2024, Sifise Compact Industrial Palletizer Bsdpfx Asma Ruxec Tswt Our state-of-the-art #palletizers are designed to streamline your production line and improve your workflow. With precision #engineering and advanced #technology, they can handle a wide variety of #products and pallet configurations, reducing the #risk of human error and increasing #productivity. Key Features: ✅ Space-saving design, also perfect for smaller production areas ✅ High-speed palletizing capabilities, increasing output and productivity ✅ Intelligent software for precise stacking and stability ✅ Easy-to-use interface, ensuring seamless integration into your existing systems ✅ Customizable options to meet your specific needs Say goodbye to the physical strain and repetitive motion injuries associated with manual palletizing, and say hello to a safer, more efficient way of working. Trust Sifise automation for all your palletizing needs.