Used Wmw Heckert Rotary Surface Grinder Sfsrv 1000/2 for sale (85,049)

Condition: ready for operation (used), Year of construction: 1989, Power: 45 kW Diameter magnet plate: 1.000 mm ø Max heigth 600 mm Diameter of rotating magnet: 1.000 mm ø Weigth: around 10 to Rodpohq Uk Tefx Ammou

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent Rsdpehv A A Djfx Ammeu - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm weight 45 ton. very good condition

Condition: new, IG 280 SD Specifications Motors Grinding Spindle Motor 20HP, 200 - 2330RPM Rotary Table Motor 1HP, 5 - 70RPM Servo Column Motor 2KW Coolant Pump 3/4HP, 45GPM Table Diameter 24" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Custom Table Options 18" diameter T-slot or drilled for customer fixtures Contact a DCM Technical Specialist for other custom table & fixturing options Capacity Max Swing Diameter 27" Max Part Height 11" with a segmented wheel 12" with a 2A2T wheel Grinding Wheel Options Segmented Wheel Hub Kits 12" or 15" diameter 2A2T Ring Wheel Hub 12" diameter 6A2 Wheel Hub 8" diameter Cortland Chuck 12" or 15" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM AC motor driven Y-axis Electrical Requirements 230V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 80" wide, 68" deep, 90" high Weight Machine & Swarf System: 5,480LBS. Electrical Box: 960LBS. IG 280 SD Features • 24" variable strength electromagnetic chuck with auto demag cycle • 20HP variable speed grinding spindle motor • Thru-spindle vacuum/pressure feed • Integral air mist collection and coolant flow systems for clean and consistent grinding • Programmable touch screen HMI controls • Manual pulse generator for precise Z-axis positioning • Internal memory for saving grind process recipes to aid in quick changeover Redeubbp Sopfx Ammju • Password protection and operator lock-out features • Automatic routine maintenance reminders • 76" x 64" Footprint

Condition: new, functionality: fully functional, IG 482 SD Specifications Motors Grinding Spindle Motor 50HP, 200 - 1180RPM Rotary Table Motor 3HP, 5 - 70RPM Servo Column Motor 5KW Coolant Pump 3/4HP, 45GPM Table Diameter 48" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Contact a DCM Technical Specialist for custom table & fixturing options Capacity Redpfxoubbqio Ammeu Max Swing Diameter 52" Max Part Height 12" with grinding segments retracted 10-1/2" with a 2A2T wheel Grinding Wheel Options 2A2T Suberabrasive or Conventional Segments 26" diameter Cortland Style Hub & Segment 26" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM Servo drive X-axis for precision positioning Electrical Requirements 460V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 137" wide, 82" deep, 88" high Weight Machine & Swarf System: 14,500lbs. (estimated) Electrical Box: 1,500lbs. (estimated) IG 482 SD FEATURES • 48” variable speed electromagnetic chuck with auto demag cycle • 50HP grinding spindle motor • Integral coolant filtration & mist collection systems • Easy to operate touchscreen controls • Mitsubishi FX5U PLC • 3 Grinding Modes - Conventional, Incremental and Grind to Height • Regrind feature allows re-running previous grind sequence without reprogramming • Continuous grind – the machine can automatically cycle through grind 1, 2 & 3 • Servo-driven precision control of both Z and X-axis with absolute home positioning • The cross slide X-axis moves with manual pulse generator • Backlash compensation on both axes • Password protection & operator lockout features • SECS/GEM Interfaced to work with 3rd party Scada type software • Password protection and operator lock-out features • Automatic routine maintenance reminders • 120" x 82" Footprint

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min Rjdpou Ndf Ijfx Ammsu distance table/horizontal spindle: min.: 60 / max.: 180 mm table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available Rsdpfsu N E Evox Ammou *

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Rjdpfxsxxvqas Ammsu

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake Redpfx Amjxm Rziomeu -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm Rsdpjvcrmpofx Ammou swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U Rsdpfxsxddqro Ammou power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: good (used), Year of construction: 1980, machine/vehicle number: 334, Offer 19194 Technical data: Rodpfx Amsrwl Nnemsu - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - Right - left rotation - Projection 210 mm - Machine table 480 x 420 mm - Distance machined base plate / drill spindle 190 / 340 mm - Drive 400 V / 0.8 / 1.0 kW - Space requirement W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 5763, Offer 24590 Technical data: - Drilling capacity 22 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 – 710 – 1400 - 2800 rpm - Throat depth 210 mm - Machine table 480 x 420 mm - Min. / max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm Redpjvxg Rujfx Ammeu - Weight approx. 170 kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7486, functionality: fully functional, spindle mount: MK 2, total width: 480 mm, total length: 620 mm, total height: 1,295 mm, overall weight: 165 kg, spindle speed (max.): 2,800 rpm, spindle speed (min.): 450 rpm, stroke length: 100 mm, Solid bench drilling machine for individual or series production in good condition (used). Redswgfkuepfx Ammou

Condition: good (used), Year of construction: 1985, functionality: fully functional, spindle mount: MK 5, height adjustment type: mechanical, total width: 2,100 mm, total length: 900 mm, total height: 3,300 mm, overall weight: 3,000 kg, drilling capacity: 60 mm, clearance between the columns: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 20 rpm, spindle stroke: 400 mm, Radial drill BR 40/2 x 1250. Prod. Heckert (GER). Year 1985. Max drilling diameter in steel (mm) - 60 mm Max threading diameter in steel - M24 Max workpiece height - 1100 mm Spindle stroke - 400 mm Arm length - 1250 mm Arm rotation - 360 Drill attachment - MK5 Rotation speed range (rpm) - 20-1200 rpm Feed range - 0.063-0.63 mm/rev Base plate mounting surface - 1400 x 800 mm Table dimensions - 650 x 650 x 500 mm Rsdpfx Amswazbvemju Machine dimensions width x depth x height - 2100 x 900 x 3300 mm Motor power - 3.7 kW Weight - 3 tons

Condition: used, Lumsden 93 ML Vertical Spindle Rotary surface Grinding Machine, fitted with 60 inch dia magnetic chuck. Auto sizing. Table Guards, Coolant tank, with pump. Serial Number 93ML 60/11616. Option to be supplied with updated electrical controls, please contact for more details. Under power ready for immediate supply. Rsdpfx Amsy N Ultjmeu

Condition: good (used), Year of construction: 1998, feed length X-axis: 1,180 mm, feed length Y-axis: 644 mm, feed length Z-axis: 480 mm, table length: 1,000 mm, table load: 1,000 kg, table width: 595 mm, power: 15 kW (20.39 HP), X - Travel: 1180mm Y - Travel: 644mm Z - Travel: 480mm Table Length: 1000mm Table Width: 595mm Table load: 1000 KG Feed rate X-Axis:30000mm/min. Redpfx Ajwrx Scemmou Feed rate Z-Axis:30000mm/min. Power: 15kW Length: 4800mm Width: 2500mm Height: 2700mm Weight: 8000kg

Condition: used, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg Rsdpfxjyabc Eo Ammsu

Condition: new, Year of construction: 2026, Grinding area 1000 x 450 mm, rotary table diameter 1000 mm, grinding wheel 400 x 100 x 127 mm, spindle power 11 kW incl. speed control, electro-permanent magnetic chuck diameter 1000 mm with holding force adjustment, automatic dresser mounted on spindle housing incl. dressing amount compensation, coolant system with paper band filter, user-friendly operation with Mitsubishi PLC control, alternatively SIEMENS 828 CNC control, new machine with 12-month warranty, highest precision at an unbeatable price/performance ratio. Grinding tests can be performed on our exhibition machine. We provide installation and training at your site, as well as future service support. Financing/leasing available, please contact us for an offer! Rodpfx Ajh I Tz Ssmmju

Condition: refurbished (used), TECHNICAL SPECIFICATIONS Rotary table diameter: 600 mm Magnetic plate diameter: 600 mm Segment holder (or diamond grinding wheel) diameter: 430 mm Maximum grinding height: 400 mm Table rotation speed, continuously adjustable: 1-20 rpm Vertical automatic increments: 0.001 mm Spindle motor power: 37 kW Grinding spindle speed, continuously adjustable: 500-1000 rpm Maximum load on table: 900 kg Net machine weight: approx. 7500 kg Power supply: 400 V +/- 5% 3 Phases, 50 Hz Control circuit voltage = 24 V DC Rodpex N I A Sjfx Ammeu TECHNICAL DESCRIPTION • Frame and uprights made of electro-welded, thermally stabilized steel, with high rigidity and reinforcing ribs. Vertical movement of the spindle head • Precision linear slides • Vertical movements of the grinding wheel head via high-precision ball screws + YASKAWA brushless shaft motor • Vertical movements of the grinding wheel head via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel head, 0.001 mm resolution Transverse movement of the rotary table • Precision linear slides • Transverse movement of the rotary table via high-precision ball screws + YASKAWA brushless shaft motor. • Transverse table movements via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel headstock, 0.001 mm resolution. Spindle Motor • Coaxial spindle with drive motor • Balanced 37 kW spindle motor, without drive belt or coupling. • Frequency converter for continuously variable spindle speed and rapid braking of the spindle motor at the end of the cycle. Rotary Table • Cast iron rotary table with hydrostatic slides. • Drive via Siemens brushless motor • Continuously adjustable table speed from 1 to 20 rpm STANDARD EQUIPMENT • Electropermanent magnetic chuck, 600 mm diameter with parallel poles, complete with electronic control and attraction force adjustment • Electronic handwheel for manual movement of the vertical and transverse axes. • LODI CNC Type T 2000 • Encoder-based measuring system for the vertical and transverse axes. Resolution = 0.001 mm • Automatic cycle with different feed rates for the various cycle phases: roughing, finishing, and sparking. • Cast iron rotary table with hydrostatic slides • Rotary table speed continuously adjustable by brushless motor • Frequency converter for continuous spindle speed adjustment and rapid spindle motor braking. • Coolant system with external collection tray. • External lubrication unit for automatic lubrication of all moving parts. • Complete segment holder (flange) with a set of segments + grinding wheel holder for diamond grinding wheel • Complete work area enclosure with sliding door • Work lights • Set of service wrenches • Documentation in French (1x printed, 1x on DVD) • CE Certificate Lubrication • External lubrication system for lubricating all moving parts. Watering System • Watering system including protective plates and hoses, including a settling tank outside the machine (without filter) Enclosure • Full enclosure with manually operated sliding door CNC Control LODI T2000 type CNC for managing and controlling the machine's axis movements. Automatic work cycle for grinding parts.

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond Rjdpfex N I Alex Ammeu - Complete auxiliary pump for washing parts and the magnetic platen

Condition: used, Technical details: number of spindles: 1000 bore capacity in steel (diameter): 32 mm bore stroke: 200 mm range of revolution per miute: 63 - 1000 U/min bore capacity in cast iron: 50 mm drill spindle - Morse Taper: MK4 spindle throat: 315 mm spindle distance: 475 mm number of drilling stations: 3 headstock adjustment: 280 mm feed:: 0,08 - 1,25 (9 Steps) mm/U distance between table/spindle: 710 mm table surface area: 450 x 560 mm Redpsw Th Nljfx Ammju total power requirement: 12,4 kW weight of the machine ca.: 3,1 t dimension machine xH: 2,15 x 1,40 x 2,65 m The previous owner removed a drill spindle with box from the gang drilling machine! *

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min Rsdpfx Aev U T Dyemmsu module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 Redpev U Un Hofx Ammeu total power requirement: 9,5 kW weight of the machine ca.: 3,8 t

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition. Rodpfxsy Rgm Ej Ammju

Condition: excellent (used), functionality: fully functional, Description WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Specification: Workpiece diameter over: - Bed: 500 mm - Saddle: 250 mm Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Rjdpfey Rgl Ujx Ammeu Main drive: 4.0 kW Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg