Used Wmw Dlz 800 Iii for sale (10,028)

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Equipped with Heidenhain digital readout. The machine functions flawlessly and has seen very little use (mainly for maintenance). Includes faceplate, 2x steady rests, several tool holders, and operating manual. - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW - 380 V - Swing over bed: 800 mm - Swing over gap: 920 mm Hjdpjy Ar Nijfx Ac Tjt - Swing over cross slide: 530 mm - Spindle bore: 90 mm - Tailstock MK-6 Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: used, Niles Centre Lathe, Type DLZ800 LIV5000, Approx 5.2m Between Centres x 860mm Swing Over Bed, 250mm Swing Over Saddle, Fitted with 750mm 4 Jaw Chuck, 2 Fixed Steadies Steadies, Total Weight 7 Tons, Serial No Specifications: Hsdpfx Ajzvrrhec Tet Swing: 1,000 mm Centers: 8,000 mm

Condition: ready for operation (used), Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible. Hsdpfxezukufe Ac Tjt

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Hjdpfezukt Iex Ac Tst

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Hodpfx Acszwgnto Tst Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm Hedpfx Acjzuyfas Tjt spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Year of construction: 1983, condition: ready for operation (used), Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible. Hjdpfeu Av E Hsx Ac Tet

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Hsdpfjvy E A Ssx Ac Tet

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest Hjdpev Hckgofx Ac Tjt - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -one set: hard interchangeable jaws -Passage: 81 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Weight: 19 kg Hjdpfx Aceduab Io Tjt

Condition: used, Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Hjdpfx Aezmxzdjc Tet Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth: 2500 mm Total height: 2600 mm Weight: 4,5 T

Condition: used, Year of construction: 1999, x-travel 1250 mm y-travel 910 mm z-travel 875 mm Control Siemens type 840 D size of pallet 800x800 mm numbers of pallets 2 turning speeds 20-6000 U/min transmission ratio 2 Feed 1-32000 mm/min 360x1 ° turning speeds 16,5 U/min Table load 1150 kg spindle taper ISO 50 Tool changer 165 Pos. weight of the machine ca. 18,5 t IKZ 70 bar B - NC rotary table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Hjdpfx Acjyqu D Rs Tet please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 taper in tailstock MK 5 turning speed range 22,4- 1120 U/min Hedpfxey Tyy Ds Ac Tot power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix "C" toolholder system - some toolholders - steady

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm Hsdju N A U Iepfx Ac Tjt daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. *

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm Hsdpfx Acsxna Uzj Tot max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Year of construction: 1962, turning diameter over bed 630 mm turning diameter over slide rest . mm Hjdpoyqv Iwjfx Ac Tot turning length 3150 mm Number: 16304188/ weight 4,8 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, Description WMW ZFWVG 250 x 800 Thread Milling Machine Thread Milling Specification: Workpiece diameter over: Hsdsy Rgl Ujpfx Ac Tjt - Bed: 500 mm - Saddle: 250 mm Milling length: 800 mm Max. module: 7 Centre height over bed: 260 mm Workpiece spindle bore: 102 mm Workpiece turning speeds: 0.0034 – 2.65 rpm Feed rolls: 0.027 – 5.66 mm/rev Longitudinal feeds, infinitely variable: 0.3 – 198 mm/min Main drive: 4.0 kW Electrical voltage/frequency: 380 / 50 V/Hz Total power requirement: 9.5 kW Dimensions: 3000x2500x1600 mm Total weight: 3300 kg

Condition: used, rated capacity 23 kW rated current 43 A voltage 400 V For sale is an electrical control cabinet, which originally belonged to the Hodoucgnijpfx Ac Tet a single-column eccentric press, make Erfurt, type PEE III/160

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 630 mm, LATHE TECHNICAL SPECIFICATION – PERFORMANCE OVERVIEW Workpiece Capacity Turning diameter over bed (nominal / max): 630 mm / 660 mm Turning diameter over carriage: Hsdpfxsx Acpdj Ac Tet - Short slides: 400 mm - Long slides: 320 mm Max. swing in front of faceplate notch: 720 mm Notch length: 265 mm Over bed: 305 mm Over floor: 1125 mm Machine Construction & Spindle System Bed width: 550 mm Spindle bore: 72 mm Faceplate: - Diameter: 630 mm - Width: 120 mm Tooling & Setup Tool cross-section (cutter): 40 × 40 mm Tool holder side length: 200 mm Spindle & Drive Performance Main motor speed: 1400 rpm Spindle speed steps: 18 Max. permitted faceplate speed: 560 rpm Feed Ranges Longitudinal feeds: - Steps: 68 - Range: 0.035–10 mm/rev Cross feeds: - Steps: 68 - Range: 0.014–4 mm/rev Rapid Traverse Rates Longitudinal: 5000 mm/min Cross travel: 2000 mm/min Thread Cutting Capability Metric threads: - 84 types, 0.2–224 mm Inch threads: - 94 types, 140–1/8 TPI Module threads: - 72 types, 0.1–112 Pitch range: - 94 types, 280–1/4 Machine Dimensions Overall length: 2300 mm + distance between centers Width: 1850 mm Height: 1725 mm Ask for a testing video! Robust and precise heavy-duty lathe featuring wide turning capacity, extensive thread cutting options, and high feed/rapid traverse performance. Ideal for demanding workshops requiring versatility, power, and reliability.

Condition: good (used), Year of manufacture: 1963 Machine number: 47 Type / Model: DLZ 355x1600 Control: conventional Center distance: 1,600 mm Bore: 35 mm Center height: 180 mm Swinging diameter over bed: 355 mm Swinging diameter over carriage: 180 mm Swinging diameter in the headstock: 700 mm Spindle speed range: 18 to 2,500 rpm Feed rate, longitudinal: 0.011 to 1.000 mm/rev Hedpsznbt Sofx Ac Tst Connection: 5.8 kW Accessories/Equipment: 3-jaw chuck 200 mm; 4-position tool holder, guide rest Condition: good, ready for use Weight: 2.2 t Footprint: 2,700 x 450 mm Dimensions: 3,000 x 1,100 x 1,300 mm

Condition: used, Stock number: 2841 Manufacturer: WMW Year of manufacture: 1961 Hsdpsy Hgnzjfx Ac Tot Machine number: 3318/61 Type / Model: DLZ 355 Control: conventional Center distance: 2,000 mm Spindle bore: 35 mm Center height: 180 mm Turning diameter over bed: 355 mm over carriage: 220 mm Speed range: 18 to 2,500 rpm Longitudinal feed: mm/rev Cross feed: mm/rev Equipment: 4-way toolpost, leadscrew Power connection: 5.8 kW Condition: used Weight: 2.2 t Dimensions: 3,000 x 1,400 x 1,700 mm

Condition: used, turning diameter over slide rest 800 mm Control Siemens 802D swing diameter 2000 mm Hsdpfsv H Etdex Ac Tet centre height 1000 mm

Condition: used, Year of construction: 2010, table length 2000 mm Hjdpoztrvnjfx Ac Tet table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: excellent (used), functionality: fully functional, WMW Heckert ZFWVG 250X800 No. 262122/42 Long thread and spline milling machine, also for gear hobbing. (Thread milling and spline shaft hobbing machine) Hsdpfx Aezxqbyec Tet Max. workpiece diameter: 250 mm (the machine can swing up to 500 mm over the bed/support) Milling length (Z-axis): 800 mm Tailstock height above bed: 260 mm Spindle diameter (bore): 102 mm Max. module: Up to module 10 / 18 (depending on the specific head configuration) Spindle speed: 45 – 560 rpm Total power consumption: 9.5 kW Machine weight: Approx. 3,400 kg

Condition: used, Year of construction: 1989, machine/vehicle number: SN: 00789901, functionality: unexamined, pressing force: 815 t, Press 1, manufacturer: Umformtechnik Erfurt GmbH, type: PKZZI 800.1/3150x1600/500E, serial number: 00789901, year of manufacture approx. 1989, 8000 kN, last service in 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Press force max. 8,000 kN – at a distance in front of the die of 12.5 mm Press force 2,500 kN – at a distance in front of the die of 200 mm Stroke rate in idle 10 to 20 min-1 Stroke of the ram 500 mm Adjustability of the ram: 500 mm Strip feed system consisting of: Roller feed, manufacturer: GSW Schwabe, type VRMA80/78, machine no. 2011-60187, year of manufacture 2011 with reel 1 (sandwich processing), SAWAB reel, year of manufacture 2011 with reel 2, manufacturer: GSW Schwabe, type: LMHR1000/1100, no.: M2011-00171, year of manufacture 2011 with reel 3, manufacturer: GSW Schwabe, type: MHR5/1400, serial no.: M2011-00170, year of manufacture 2011 including enclosure GWS project no.: 2011-60187 with peripherals: - Conveyor belt - Raziol system Hodpfjzvdm Rjx Ac Tst Function and technical data not verified without additional items/without further accessories, unless explicitly stated as part of the item WE STRONGLY RECOMMEND PARTICIPATING IN THE INSPECTION! If interested, please contact us via email!