Used Welding Machine Power Supply for sale (84,588)

Condition: used, functionality: unexamined, input voltage: 400 V, Used heavy-duty welding power source from Elmatech AG Brand: Elmatech AG Hfodpszv Smxjfx Ap Een Model: Vario 800-DC-HF + Elmatech HZ 80001 50 Hz, 400 Volts

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Hedpfx Aozugnzop Eofn Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle Hodozugn Iepfx Ap Esfn 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) Hfodpfx Aozii Awop Esn We will be happy to answer any further questions you may have by telephone.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Hodpfx Ast Awm Dep Esfn Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: new, Year of construction: 2025, workpiece weight (max.): 12,000 kg, turntable diameter: 280 mm, overall weight: 120 kg, The Robotmover 20 is the ultimate solution for moving heavy loads such as industrial machinery, installations, or steel structures – 100% electric, so zero emissions and noise pollution. Work with unparalleled flexibility thanks to the wireless remote control and the ability to effortlessly change direction 360°. This compact electric mover excels at maneuvering through tight spaces, making it an indispensable tool in congested or confined environments. Thanks to the 48V-60Ah battery, the Robotmover ensures long-lasting operation, saving both time and labor. Whether you're moving equipment or heavy loads, this electric Robotmover is your reliable partner that streamlines your work and increases productivity. Flexible Operation: The wireless remote control provides infinitely variable drive with 360° direction changes. Strong Traction: The two powerful 1000W motors equipped with magnetic brakes produce a robust pulling force of 20 tons. High Load Capacity: Hfodpfsw I Rt Njx Ap Eon The triple-bearing turntable effortlessly carries a maximum load of 12 tons. Long Battery Life: The 48V lithium-ion battery with a 60 Ah capacity provides 4-5 hours of use without frequent charging. Scope of supply: Robotmover 20, remote control, battery chargers Also available transport crate with garage, battery operated hydraulic jacks, fixed following rollers electric skates power skates machine mover robot mover jung lifting equipment hydraulic jacks

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Hjdpfx Apoyhq A Rj Ejfn Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power Hedsk Radispfx Ap Esfn is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, MIG MAG welding machine, gas-shielded welding unit, CLOOS type GLC 357 N MIG MAG welding power source Manufacturer's number: 576, Year of manufacture: approx. 1985 Rated power: 350 Amps Power: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Adjustment range: stepless Connecting hose package: 4.5 meters Mains connection: 380 Volts, 50 Hz, 32 Amp plug - 2-cycle and 4-cycle welding system - external wire feeder, type CK 72 ZK, with 2-roller drive and 4.5-meter hose package - 3-meter hose package with central connection and CLOOS hand torch - water-cooled - pressure gauge for gas cylinder - welding machine equipped with 1 mm welding wire Hodpfx Apshubg Te Eofn Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg Device tested - function is working properly.

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures by means of diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft-soldering machine, copper band welding machine), consisting of a main machine and control system, "PLC control, touchscreen operation". Process description: The workpiece carrier enters the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding chuck. The welding chuck moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process takes place. This process is repeated until the armature is completely welded. The welding chuck moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the conveyor system; I0 armatures are conveyed to the removal conveyor. Technical data: Manufacturer: Gatek Designation: Diffusion Welding Machine Energy data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Hedpfx Apog Icfpo Eefn Fuse rating: 35 A Water: Inlet 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. Hedjd N E Rvspfx Ap Esfn The welding test with stick electrodes yields very good results.

Condition: good (used), Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system -Manufacturer: Köcor, stud welding machine with stud welding gun -Type: 902 E Hodpez N Hlusfx Ap Ejfn -Power: 200 - 900 A -Stud welding gun: K 22 -Welding area: Bolts and pins from M3 – M12 -Quantity: 1x stud welding machine available -Dimensions: 590/300/H510 mm -Weight: 81 kg

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. Hfsdpfxoza T A Re Ap Esn The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: good (used), Year of construction: 2004, EMA high-frequency welding machine with cooling water unit EMA high-frequency welding machine MFA with Thermotec PT2000 water cooling system Welding machine range: 0 - 1000 °C MF output: 80A MF generator frequency: 10 kHz Mains connection: 380V 106 A Hsdpfx Aod Tv H Dop Esfn Foot pedal Water cooling, cooling water unit Thermotec PT2000 Dimensions approx. L1500 x W730 x H1900 mm Volume: 1730 liters Year of manufacture: 2004 The collection basin is not included in the scope of delivery. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Hodpfx Aow Rm Sasp Eefn Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) Hfedpfx Aszd Rmgsp Esn (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Hfodpfozqucfsx Ap Een Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: good (used), Year of construction: 2019, Professional automatic packaging machine, also suitable for large packages. For example, for packaging food, technical articles, printing and paper products, household and toy goods, and textiles. -Up to 10 programs can be stored via the display. -Automatic welding frame movement. -Automatic residual film winding. -Automatic product discharge via the outfeed conveyor. -Process start manually via a push button. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt can be adjusted steplessly in height via a hand crank. -Welding frame approximately 870 x 620 mm. -Maximum package length approximately 850 mm. -Maximum package width approximately 600 mm. -Maximum package height approximately 300 mm. -Welding frame movement is electrically powered. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum film width approximately 800 mm. -Perforation possible via 3 adjustable needle rings. -Roll holder can be moved separately. -Product insertion can be adjusted separately. -The machine can be moved or secured via lockable castors. -Machine dimensions approximately: Length 2 m x Width 1 m x Height 1.5 m. Multilingual documentation including operating instructions, spare parts lists, and circuit diagrams is included in the scope of delivery. Hfsdpfx Apez Sn Tfo Eon The machine can be demonstrated while powered.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, PFAFF 8303i CE hot air seam sealing machine (Type 8303-243/001) PFAFF 8303-243/001 is an advanced, computer-controlled hot air seam sealing machine designed for sealing and taping seams in waterproof, water-resistant, and breathable materials (e.g., Sympatex, Gore-Tex). The version with the post at the rear (243/001) is primarily intended for footwear production and applications in the automotive industry (e.g., car seat components). Key advantages and features: Digital control (Touch Panel): A clear touch screen allows for quick programming of operating parameters, saving ready-made "recipes," and prevents unauthorized changes to settings with password protection. Independent roller drive: Separate control of the upper and lower transport rollers guarantees perfectly smooth material feed and eliminates seam wrinkling. Automatic tape cutting: The machine has an integrated tape cutter driven by a separate motor, which significantly increases efficiency and repeatability of the work cycle. Process stability: A patented two-chamber air nozzle ensures a perfect temperature profile along the entire length of the seam. Safety and ergonomics: A modern stand-up/sit-down workstation mounted on a stable table base with two control pedals. Technical specifications: Model / Type: PFAFF 8303 - 243/001 (2019 version) Hfsdez Rkc Hspfx Ap Esn Maximum sealing temperature: up to 650 °C Operating speed: up to 7 m/min (standard, with an option to increase to 20 m/min) Heating power: 3600 W Width of tapes: 10 – 30 mm Diameter of transport rollers: 25 mm (designed for hard-to-reach areas in footwear) Power supply: 230 V (single-phase), 50/60 Hz Required air pressure: 6 bar (consumption approx. 150 liters/min) Main application: Sealing seams in trekking, sports, and military footwear. Production of interior car components (headrests, armrests, foam seat profiles). Specialized protective, work, and outdoor clothing. The machine is in perfect technical condition, like NEW! Price for the machine upon request. Transport to the customer is possible. Please check our other auctions.

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Hfjdpfxsrtvi Ue Ap Ejn Overall in very good condition.

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Hfjdpfertvi Rox Ap Esn Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. Hsdpfx Apsykvdls Eefn The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 8382, 2-head welding machine for PVC profiles Hedezdq Ttjpfx Ap Eefn

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Hsdozamffspfx Ap Ejfn Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: used, MIG/MAG pulsed gas shielded welding machine FRONIUS, Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Power: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 50 volts Open-circuit voltage: approx. 30 volts Mains connection: 400 volts, 50 Hz, 32 amps, plug - Digital display for voltage and current - Pulse function - Various welding programs can be selected Welding processes: MIG/MAG/TIG (program and manual operation) 2-cycle, 4-cycle, 4-cycle special and spot welding - Separate 4-roller wire feeder FRONIUS, Type VR 152, with connecting hose package approx. 1.5 meters - 4 meter hose package NEW, with central connection FRONIUS - External FRONIUS water cooling unit, Type FK 71 - Welding gas pressure regulator NEW Hfsdpeyxy Tbsfx Ap Eon - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration The unit is also suitable for TIG and electrode welding. Additional equipment for TIG and electrode welding is not included in the scope of supply.