Used Weingarten Arp 100 for sale (26,286)

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Cjdpsu Rwa Ijfx Ac Terg Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm Crodpfjxh Swhjx Ac Teg no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm Codpfx Acezrpqmo Tjrg dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Credpfetu Hvwjx Ac Teg Table opening: 450 mm diameter

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Stroke rate 70 1/min. Further data and pictures on request Crodpjrm Ntpsfx Ac Teg the press is currently not functional and must be mechanically and electrically overhauled

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm no. of strokes 55 / 82 Hub/min Csdpfxeugnpis Ac Terg tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: used, Year of construction: 1971, pressure 100 t passage width . mm stroke . mm tracking travel 45 mm safety distance 208 mm Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Crodpeyuttrsfx Ac Tog More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1966, condition: used, pressure 100 t Cjdpfxslp U D Ej Ac Torg throat 410 mm stroke 8-112 mm no. of strokes doubel-strokes per min. 55 / 82 ram - range of adjustment 80 mm table surface area 950 x 700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm

Year of construction: 1977, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes 55/82 Hub/min ram - range of adjustment 80 mm table surface area 950x700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 800 mm total power requirement 11 kW weight of the machine ca. 7,5 t Cedelp U Daspfx Ac Tsrg dimensions of the machine ca. BxTxH 1600x2200x3000 m

Year of construction: 1970, condition: used, pressure 100 t throat 415 mm Crodslp U Spspfx Ac Tjg stroke 8-140 mm no. of strokes 48 Hub/min ram - range of adjustment 80 mm table surface area 920x670 mm ram surface 700x450 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 1500x2000x2800 mm

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98 EZ100/2675, overall weight: 4,000 kg, number of blades: 68, total length: 2,800 mm, total height: 2,500 mm, control cabinet length: 500 mm, control cabinet width: 500 mm, control cabinet height: 1,000 mm, total width: 2,000 mm, rotor length: 1,000 mm, power: 30 kW (40.79 HP), type of input current: three-phase, year of last overhaul: 2025, working width: 1,000 mm, sieve perforation: 15 mm, For sale is an ARP single-shaft shredder type EZ 100 in operational condition, ideally suited for applications in the recycling industry, plastics processing, wood preparation, as well as for industrial size reduction processes. The machine is equipped with a hydraulic feed system for consistent material intake and a robust cutting system for continuous operation. Crsdpfoyiuv Dex Ac Tsg

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table Crodpjtycdkofx Ac Tog - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t Credpotqm Dmofx Ac Tog dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: used, Technical details: Total force (nominal): 1000 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Last overhaul 2010/2020, consisting of: Cjdpfszx Rmvex Ac Terg Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, 0602700 Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, 0603100 Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-axis robot, manufacturer

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) Credpfx Aox Ry Hroc Tjg 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: used, Year of construction: 1991, Technical details: spindle diameter: 100 mm x-travel: 5020 mm y-travel: 1000 mm z-travel: 2000 mm control: Heidenhain 415 B tool taper: SK 50 • For sale without floor plate. • Equipped with an indexable universal milling head, adjustable in 2.5° increments. • 60-position automatic tool changer. • Including Scharmann rotary table (rotation function defective – sold with this known defect). • Rotary table size: 2,500 × 2,000 mm. • The machine can be inspected under power at its location in Saxony, Germany, by appointment upon request. * Codpfx Acszk Ezrs Torg

Condition: ready for operation (used), Marposs 6366160401 Power Supply 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, used, in good condition, 100% functional, scope of delivery as per photos. Crjdey Nrynopfx Ac Tsg

Year of construction: 1969, condition: ready for operation (used), A complete 8-stage transfer press line with a Weingarten double-column transfer press is available. 1) Mechanical double-column transfer press Weingarten S.3100.08.70.1, year of manufacture: 1969, tool stations: 9, forming stages: 8, total press force: 3100t, press force blanking slide/drawing slide: 300t/2800t, strokes: 28/min, blanking slide stroke: 200mm, drawing slide stroke: 500mm, max. drawing depth: 120mm, drawing slide ejector stroke: 100mm, blank holder stroke: 50mm, drawing cushion force: 25t, transfer pitch: 700mm, max. blank dimensions X/Y: 450mm/450mm, max. blank diameter: 540mm, table dimensions X/Y: 1200mm/5600mm, main motor power: 300kW, machine dimensions X/Y/Z: approx. 10500mm/7500mm/9700mm, weight (according to documentation): approx. 524t, stroke counter reading (September 2024): approx. 25 million. 2) Blanking and cutting press Georg Maschinentechnik PKD 630, year of manufacture: 2004, max. press force: 6300kN, slide stroke: 240mm, strokes: 40/min, max. slide adjustment: 100mm, max. shut height: 525mm, table dimensions X/Y: 1200mm/1500mm, slide dimensions X/Y: 1050mm/1100mm, main motor power: 110kW, weight: approx. 110t. 3) Decoiler Roland Dreher 2398 G-SP, year of manufacture: 2004, max. load capacity: 25500kg, max. strip width: 1050mm, coil inner diameter range: 475mm-615mm, max. coil outer diameter: 2000mm. 4) Straightening feeder Roland Dreher 1689 G-SP, year of manufacture: 2004, strip width range: 100mm-1050mm, max. strip thickness: 12.4mm, max. strip cross-section: 6000mm², straightening rolls: 6, straightening roll diameter: 100mm, infeed and outfeed rolls: 4, diameter: 140mm, max. feed speed: 50m/min, feed accuracy: 0.1mm, transverse travel: +/-400mm. 5) Transfer feeder Roland Dreher 700/160/50, year of manufacture: 1994, feed length: 700mm, closing stroke: 160mm, lifting stroke range: 0mm-50mm, max. rail spacing: 1190mm, strokes: 24/min. 6) Central component oiling and processing system Leblein, control system: Siemens S7-300. 7) Line control system and electrical cabinet Siemens S7-317 with two decentralized Siemens ET200M units, modernization year: 2011. Including additional peripheral equipment such as feeding, marking, hydraulics, conveying, etc. Documentation available. An on-site inspection is possible. Cjdpfx Aozl U H Toc Torg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 85 kg, total length: 735 mm, total width: 420 mm, total height: 295 mm, volume flow: 120 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath for work with MAP atmosfere ( hig % of O2) Available in stock. Completely new with 12 months warranty Nominal flow: 100 m3 / h at 50Hz. End vacuum: 0.5 mbar abs. Any clarification, do not hesitate to contact us. Crsdpfx Asfk Sizjc Tsg

Condition: used, Digital overpressure measuring device Digibar suitable for measuring static and quasi-static liquid and gas pressures. PE 100 is the battery-powered version. Crodpfx Ajcf Rb Tjc Tsg

Condition: used, Model - CR1100D Max. Width of planing - 1100 mml Min. Thickness of planing - 8 mm Max. Thickness of planing - 150 mm Min. Length of planing - 435 mm Bottom spindle speed - 4500 RPM Electric power - 75 kW Feed drive motor - 5 HP Crjdpfswf Hbrsx Ac Tjg Pressure roller elevation motor - 2 HP| Dust hood outlet dimensions - O125 mm x 1, 200 mm x 4 Cutter-head diameter - 150 mm Air pressure - 4~6 kg/cm Table height from floor - 990mm Machine dimensions (L x W x H) - 2800x2150x2000 Net weight (Approx) - 4600 kgs Gross weight (Approx) - 4950 kgs

Condition: ready for operation (used), Marposs 3404995660 / 3404995 measuring probe SN: 09T01002 – cable length: 7.5m, used, normal signs of use, 100% functional, delivery as per photos. Crodey Nrybopfx Ac Teg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 85 kg, total length: 735 mm, total width: 420 mm, total height: 295 mm, volume flow: 120 m³/h, input frequency: 50 Hz, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 100 m3 / h at 50Hz. Final vacuum: 0.1 mbar abs. Cjdpfxoftzf Eo Ac Terg Any doubts, do not hositate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 25 kg, total length: 350 mm, total width: 260 mm, total height: 210 mm, volume flow: 30 m³/h, input frequency: 50 Hz, type of cooling: air, rotational speed (max.): 2,850 rpm, warranty duration: 12 months, protection type (IP code): IP55, Oil lubricated rotary vane vacuum pump. Available in stock. Completely new. 12 months warranty Cedeftzx Eopfx Ac Tjrg Nominal flow: 25 m3 / h at 50Hz. Ultimate pressure: 2 mbar abs, Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2024, Roots booster vacuum pump. Available in stock. Crsdpefk Si Sofx Ac Tsg Marpa Vacuum brand pump. Pump completely new. 12 months warranty Nominal flow: 500 m3/h at 50Hz. Final vacuum: 3x10^-4 mbar Any clarification, do not hesitate to contact us.