Used Wanzke Gta 250 for sale (10,389)

Condition: used, Year of construction: 1995, functionality: fully functional, pressing force: 250 t, table width: 1,600 mm, table length: 2,650 mm, overall weight: 55,000 kg, die cushion stroke: 235 mm, Hydraulic deep drawing press Wanzke GTA 250 year of construction 1995 used Technical data: Pressing force 2,500 kN ram stroke 600 mm ram speed working stroke 25 mm/s Die cushion 1,600 kN Die cushion stroke 235 mm Table clamping surface 2,650 x 1,600 mm Stroke limiting spindles 2 pcs. Damping cylinders 2 pcs. Drive power 75 kW Press dimensions approx. width 4,250 mm (without cladding) depth 2,000 mm height 5,150 mm Weight 55 to. Table: Holes for quills in the center of the press table. From there, the other holes holes have a distance of 150 mm to the right and left There is also a hole in the middle of the press table. The hole spacing Iodpfx Aaeup Skwjtoif is also 150 mm. A maximum of 15 quills are possible lengthwise and 7 widthwise. possible. Quill diameter: 30 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11413, Year of construction: 2019, operating hours: 12,190 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), fork length: 2,400 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: approx. 3,300 mm Load capacity: 5,000 kg Attachment: Kaup 4.8T160BIZ or 4.8T160BIZA Design: Integrated fork positioner with side shift Forklift side connection: Integrated, suitable for Toyota 40-8FD50N Fork side connection: ISO class 3B Hydraulic functions: 2 Overall width: approx. 1,350 mm Opening range: 0–1,000 mm, edge to edge Overhang: approx. 202 mm from the front edge of the lifting carriage Lateral shift: up to ±250 mm from the forklift's longitudinal axis Attachment load capacity: 2,500 kg at a load center distance of 1,200 mm Remaining load capacity: 2,500 kg with centered load and a load center distance of 1,200 mm Attachment weight: approx. 650 kg Design: Bolt-on forks Fork cross-section: 160 × 50 mm Fork length: 2,400 mm Load guard Kaup 4.8T479.1 Design: Load guard with horizontal square tubes Width: approx. 1,000 mm Height from floor: approx. 1,200 mm for ISO class 3B Weight: approx. 24 kg MACHINE DETAILS Mast: Duplex tele-mast Engine: Diesel Rated power: 55 kW Ijdpfx Aasztwm Sjtsif Front track width: 1,150 mm Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Weight: 8,040 kg Operating hours: approx. 12,190 h EQUIPMENT EEC specification SAS – System for active stability Variable displacement pump 4-way hydraulics with hose routing for the 3rd and 4th valve SE tires front, single tire SE tires rear Professional cabin Air conditioning Mini-lever with direction switch and armrest Rear grab handle with horn button Deluxe multi-function display OK monitor Warning light LED blue spot warning light to the rear Fire extinguisher: 2 kg Gear change protection Cold weather package with 5W-30 oil and larger battery German type plate TIESA Modification Center Smart Access driver access card Diesel particulate filter Integrated Kaup fork positioner Valve block side shift Kaup load guard The overall height and weight of the forklift must be taken into account when selecting the transport vehicle. There is no loading ramp on site. However, a forklift with a load capacity of 15 tons is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The technical data provided are based on the original offer. No guarantee is given for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SN319009701, functionality: fully functional, immediately available, very good condition, 12 months warranty With safety system for solvent-containing substances according to DIN 1539 Ijdpfx Aezivl Ejatjif -Internal dimensions w x d x h 1000 x 1000 x 1500 mm -External dimensions w x d x h 1765 x 1425 x 2615 mm -Capacity 1500 liters -Tmax 250°C -Controller JUMO Imago 500 -Approved amount of solvent at Tmax 250 g: 46 g -Exhaust air flow rate: 6 m³/min -Optional equipment: 1 feed-through, e.g. for thermocouples Entry markings -Matching charging carts and trays available on request! -Connected load 26 kW -Net weight 1250 kg -Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Inspection in our warehouse is possible by appointment. We offer new and used industrial ovens. Please contact us! Oven, industrial oven, drying oven, firing oven, heating oven, heating cabinet, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, curing oven, convection drying cabinet, solvent oven, chamber dryer, paint drying oven.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 319009703, functionality: fully functional, available for short-term delivery, 12 months warranty Equipped with a safety system for solvent-containing substances according to DIN 1539! 3 heavy-duty pull-out shelves, each with a load capacity of 123 kg, full extension! -Internal dimensions w x d x h: 1000 x 1000 x 1500 mm -External dimensions w x d x h: 1765 x 1425 x 2615 mm -Volume: 1500 liters -Tmax 250°C -Controller: JUMO Imago 500 -Approved solvent quantity at Tmax 250°C: 46 g -Exhaust air volume flow: 6 m³/min -Additional equipment: Isdpfxszivlro Aatsif 3 pull-out grid shelves, heavy-duty, each with a maximum load capacity of 123 kg 1 pull-out chip tray at the bottom, included 1 feedthrough, e.g., for thermocouples -Connection power: 26 kW -Net weight: 1250 kg -Includes documentation, CE declaration We would be happy to offer installation and commissioning services. Inspection can be arranged at our warehouse. We carry new and used industrial ovens. Please contact us! Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, sintering oven, convection drying cabinet, convection oven, solvent oven, chamber dryer, paint drying oven

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 319009702, functionality: fully functional, available for short-term delivery, 12 months warranty Equipped with a safety system for solvent-containing substances in accordance with DIN 1539! 3 heavy-duty pull-out shelves included, each with a load capacity of 123 kg, full extension! - Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm - External dimensions (w x d x h): 1765 x 1425 x 2615 mm - Volume: 1500 liters - Tmax: 250°C Isdpfszivl Ssx Aateif - Controller: JUMO Imago 500 - Approved amount of solvent at Tmax: 250 g / 46 g - Exhaust air volume flow: 6 m³/min - Additional equipment: 3 pull-out grid shelves, each with a load capacity of 123 kg 1 pull-out chip tray at the bottom, included Pass-through for e.g. thermocouples - Connection power: 26 kW - Weight: 1250 kg - Includes documentation, CE declaration We would be happy to offer installation and commissioning services. Inspection is possible in our warehouse by appointment. We offer new and used industrial ovens. Please contact us! Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, convection drying cabinet, convection oven, solvent oven, chamber dryer, paint drying oven

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Includes notebook and PCdemis 2016 software! TECHNICAL DETAILS FP2 Mobility Pack: included Measuring software: PCdemis (2016) Notebook: DELL M 6800 with a 17-inch screen and Windows 10 Tripod: Brunson heavy-duty rolling tripod, type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volumetric accuracy: ±0.029 mm Arm weight: 8 kg Probe set: Probe with ruby ball 3mm, 6mm and with steel ball 15mm EQUIPMENT - Carbon fiber double-tube construction enables separation of stability and measurement - AbsoluteArm series can start measuring directly without referencing - Probing system with automatic probe recognition - Mounting plate with magnet - FP2 Mobility Pack - Transport case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable measuring arm - notebook - Dust cover Iodpszrd R Usfx Aateif - New pressure cylinder installed - Relabeling of the measuring arm before calibration 2023 - ISO 10360 acceptance with certificate 2023 is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling tripod – i.e. 3 parts - If the buyer arranges collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, with bubble wrap inside) and a Euro pallet (Brunson rolling tripod) at a price of €250, secured with strapping to the pallet.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Iijdpfx Aju Dxb Tsatef Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: used, Year of construction: 1990, Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min Standard configuration DREHER - Model WAV-MD-25, YOM 2000Electronic universal roller feedSheet width max. 510 mm Sheet thickness max. 6.5 mm Number of feed rollers 2 Diameter of feed rollers 125 mm Feed speed 137 m / min Feed length 0 - 9999.99 mm Feed accuracy +/- 0.05 Iisdpfxjuqdhko Aatof Drive power 5.5 kW

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Iedpfx Aaozu Nyaotoif Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Isdpfx Aaezmamuotjif Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: - printing on plastics - marking metal components - technical prints - logos and advertising Isdpoy St Skefx Aatsif - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) Iiedpszu Ryhsfx Aatof - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: good (used), Year of construction: 2007, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 370 mm, injection pressure: 1,390 bar, injection weight: 168 g, mold height (min.): 250 mm, ejector stroke: 150 mm, Clamping force: 80 t Year of manufacture: 2007 Injection unit: 250 Screw diameter: 40 mm Specific injection pressure: 1390 bar Injection volume: 185 ccm Tool closing system: 800 Isdpfxjzt In To Aateif Clamping force: 80 t Distance between columns: 370 x 370 mm Ejector force: 40 kN Tool height: 250 mm Opening stroke: 440 mm Ejector stroke: 150 mm Weight: 3180 kg Control system: Selogica Equipment: 2 x hydraulic core 5 heating zones for the mold Rotameter

Condition: used, Year of construction: 2003, machine/vehicle number: 59 526 01 579 0010, functionality: fully functional, Vötsch VTU 250/200/125 – Heat and drying cabinet. Iijdpjzu Ngaefx Aatef

Condition: excellent (used), Year of construction: 2018, 2018 Krauss Maffei PX 120-250 All Electric Injection Mold Machine Clamping Force 120 tonnes (Approx. 1200kN). Tie Bar Spacing 470 × 420mm. Mold Platen Dimensions 680 × 610mm (Typical For The PX 120 Series). Opening Stroke 400mm. Maximum Mold Height (Min-Max): 200-550mm. Ejector Stroke 150mm. S/No. 61030113 (2018). With Piovan MDP2 Volumetric Doser, Piovan ETW12-P6 Temperature Controller & Husky H-C6-1-NE02-12 12-Zone Hot Runner Temperature Controller. Overall Dimensions L5.34 x W1.35 x H1.85m. Weight 7,900kg. Iisdpfszt Nxgex Aatjf

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Iiedpjhktq Aofx Aatsf Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Diameter of gate cylinder 2: 2 x 250 mm Force of gate cylinders 1: 2 x 1768 kN Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Iisdpew Uf Tkofx Aatof Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: excellent (used), Catalogue number 7445 TECHNICAL DATA - Track width: 250 mm - Roller width: 400 mm - Max. blade diameter: 400 mm - Blade bore diameter: 80 mm - Max. cutting height: 140 mm - Table width with clearance: 730 mm - Table length: 2120 mm Iiodpfx Aajza D Rrotof *From above: - Pawls - Pressure roller, smooth - Pawls - Pressure roller, smooth - Saw shaft - Smooth pressure rollers, 2 pcs. From below: - Guide - Sliding shaft, smooth - Pawls - Track - Central lubrication - 2 lasers - Infinitely variable feed speed adjustment - Feed motor: 1.1 kW - Main motor: 37 kW - Electric lifting of the frame: 0.75 kW - Electric lifting of the saw shaft: 0.75 kW - Extraction port diameter: 200 mm - Overall dimensions (L/W/H): 2200x1850x2100 mm - Weight approx.: 3000 kg ADVANTAGES – German manufacture – Laser – Electric lifting of the frame and shaft – Infinitely variable feed speed adjustment – Used multi-blade saw, in very good condition Net price: 109,900 PLN Net price: 26,160 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number: 7548 Iijdpfx Aszccgksatjf TECHNICAL DATA Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Pressure roller, smooth Shaft with sawblades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Main motor: 30 kW Electric body lifting Manual saw shaft lifting Extraction nozzle diameter: 160 mm Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg – German-made – Electric lifting of body and saw shaft – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Isdpfxjztad Ts Aatsif Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,672 h, functionality: fully functional, machine/vehicle number: 0040000281C, turning length: 500 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,300 kg, controller model: Heidenhain Plus IT DinPlus/TurnPlus V7, TECHNICAL DETAILS Turning length: 500 mm Y-axis stroke for cross slide: ±40 mm Spindle type: Integrated spindle motor ISM 52 Plus Drive power: 20/27 kW at 100/40 % duty cycle Spindle speed: 6,000 rpm Turret: 12-station disc turret Sauter Tool holder: VDI 30, DIN 69880-30 Iodpsztb Adsfx Aateif Tool drive: Connection/drive according to DIN 5480 MACHINE DETAILS Control system: Heidenhain Plus IT DinPlus/TurnPlus V7 Clamping system: Hydraulic collet chuck Draw tube inner diameter: 52 mm Measuring system: Direct measuring system Glass scale: X-axis Connection power: 25 kVA Rated current: max. 40 A Fuse: 44 A Mains voltage: 400 V Mains frequency: 50/60 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,300 kg Operating hours (according to counter) Spindle hours: 7,672 h 2nd counter: 22,936 h EQUIPMENT C-axis Hydraulic spindle brake Tailstock Chip conveyor with coolant system Connection nozzle for oil mist separator including electrical connection Coolant spray gun Separate speed limiting device for the main spindle for power chucks with predefined speeds below the maximum machine speed Documentation Tool case for disc turret Ø 30

Condition: good (used), Technical data for the shelf connector: Isdpfx Aajmqk Svjteif Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm material thickness: approx. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,330 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - Track width: 250 mm - Roller width: 350 mm - Roller diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm - Table width with clearance: 700 mm - Table length: 1790 mm Iodszh Ia Sspfx Aatjif Top, in order: - Pawls - Pressure roller, slip type - Pawls - Pressure roller, smooth type - Roller with saws - Smooth pressure roller, 2 pcs Bottom: - Guide strip - Smooth slip roller - Pawls - Track Infeed table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimension of infeed table (L/W/H): 580x530x900 mm Outfeed table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimension of outfeed table (L/W/H): 1210x535x900 mm - Centralized lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction nozzle diameter: 140 mm - Overall dimension of the multi-blade saw (L/W/H): 2000x1450x2000 mm - Total weight approx. 3000 kg ADVANTAGES – German manufacturing – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 8,451 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66Te Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66Te graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards and only 8,451 hours. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66Te Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66Te graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in very good condition and has completed only 8,451 hours. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66Te Graphic CNC Control Hours: Only 8,451 hours Condition: Very good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Ijdpozdak Aofx Aatoif Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66Te graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250mm - Shaft width: 400mm - Shaft diameter: 80mm Isdpszrmruofx Aatsif - Maximum blade diameter: 400mm - Blade bore diameter: 80mm - Maximum cutting height: 140mm - Table width with clearance: 730mm - Table length: 2130mm From the top: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth - Saw shaft - Smooth pressure shaft, 4 pcs From the bottom: - Smooth slip shaft - Pawls - Track Infeed table + guide rail: - Roller width: 460mm - Feeder dimensions (L/W): 1660x630mm - Overall dimensions (L/W/H): 2010x630x900mm Outfeed table: - Feed rollers: 8 pcs - Roller width: 800mm - Overall dimensions (L/W/H): 4400x980x880mm - Centralized lubrication - Electric body raising/lowering: 0.55kW - Electric adjustment of saw shaft: 0.55kW - Stepless feed speed adjustment: 1–39m/min - Feed motor: 1.1kW - Main motor: 30kW - Extraction port diameter: 210mm - Overall dimensions of multirip saw (L/W/H): 2520x1870x2000mm + control panel - Total weight: approx. 2500kg ADVANTAGES – German-made – High cutting height – Infeed and outfeed tables – Used multirip saw, very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)