Used Vecoplan Chipper Hacker 55 / 26 / 2 for sale (80,324)

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm Ksdjihpg Eopfx An Uedl TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

Year of construction: 1995, condition: like new (used), Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm Kdsdskth N Njpfx An Uel rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Condition: used, mileage: 208,669 km, power: 235 kW (319.51 HP), first registration: 12/2014, fuel type: diesel, number of seats: 57, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro6, color: yellow, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, According to our "General and Specified Terms and Conditions," and without any guarantee or warranty, we can offer you the following vehicle today on a non-binding basis, subject to prior sale, errors, or typographical mistakes: Iveco Crossway Interurban Bus 55+1 (Vehicle 105) First registration: 15/12/2014 Mileage: 208,669 km Operating hours: 5,766 hrs Engine: 6,728 cc 235 kW / 320 HP Euro 6, A, M, N Gross vehicle weight: 18,000 kg Unladen weight: 11,700 kg Payload: 6,300 kg Overall length: 12,097 mm Kdodpfoy Hzdwjx An Usl Overall width: 2,550 mm Overall height: 3,455 mm Interurban bus model CBCW3/00-3C-C1JA3-1 TÜV valid until 04/2027, safety inspection (SP) until 07/2026 LAWO Additional headlights Full air suspension Tyres: 295/80R22.5 approx. 30% tread remaining all-round Single front door, double rear door 55 seats + 1 tour guide + 1 driver, standing room Microphone Driver’s air-sprung seat Fully automatic transmission Air conditioning, auxiliary heater Multi-function steering wheel Retarder Main battery disconnect switch Radio/CD Overhead luggage racks left and right Outer armrests Seatbelts No footrests Underfloor luggage compartment School bus shifting function Bus stop brake Stop request buttons Grab rails 100 km/h approval Price: €75,000.00 (net) All information is provided without any guarantee or warranty. Our "General and Specified Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court in Ludwigslust; for disputes exceeding this amount, the regional court in Schwerin shall have jurisdiction. Subject to errors, typographical mistakes, and prior sale.

Condition: excellent (used), Catalogue number 6825 TECHNICAL DATA - Loading hopper dimensions (L/W): 900x630 mm - Rotor working width: 540 mm - Motor: 7.5 kW - Sieve diameter: 20 mm - Knife size: 40x40 mm - Number of knives: 15 pcs - Auto-reverse - Pressing drawer - Dimensions (L/W/H): 2060x980x1580 mm - Weight: 1008 kg Kdodpsy Nz Arofx An Uel ADVANTAGES – German-made – Not repainted – Very good condition – Used shredder Net price: 31,900 PLN Net price: 7,590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Heidenhain HR 410 handwheel ID: 296469-55 SN: GH302651, professionally overhauled and tested, comes with a 6-month warranty, 100% functional, scope of delivery as per photos. Kodsy Nqfpopfx An Ujdl

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 Kdsdpfx Anoy Dqtpo Uel TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, first registration: 11/2010, color: other, Year of construction: 2010, GOODYEAR TIRES IN GOOD CONDITION FOR MEGA OR LOWLOADER. Kdodpfxoxvx Ipe An Uol

Condition: good (used), Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm Kodpsb A Nlusfx An Usdl -Weight: 110 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2285x1420x1730 mm Weight 1600 kg Kdodpfsvz Epzsx An Uol Total power requirement 22 kw

Condition: new, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, hydraulic side locking system. Body: 26t hooklift system for containers from 4.3m to 6.6m, hook height 1,570 mm, titanium model, hydraulic combined container locking (internal and external), mechanical pickup hook locking, plastic cover over control block, pneumatic cab controls, full-speed mode, oil tank supplied with 2" hoses & connection materials, 84L standard pump, mounting kit torsion-resistant for 14 mm bolts, device length: 5,500 mm! 4th control block for additional hydraulics. Surcharge for retrofitting with radio control: 6,000.00 EUR. Underrun protection available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, intermediate sale, and errors! Kdedpfewngnkjx An Ujl

Condition: new, color: black, driver cabin: other, gearing type: other, Year of construction: 2023, Vehicle location: Bovenden, hydraulic transverse locking. Superstructure: 26t hooklift system for containers from 4.3m to 6.6m, hook height 1,570mm, titanium version, hydraulic combined container locking (inside and outside), mechanical pick-up hook locking, plastic cover above the control block, driver’s cab operation pneumatic, complete high-speed mode, oil tank supplied with 2" hoses & connection materials, 84l standard pump, mounting kit torsion-resistant for 14 mm bolts, device length: 5,500mm! 4. Control block for additional hydraulics. Surcharge for retrofit radio control EUR 6,000. Underride guard available at an extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Kdedpjwngm Hjfx An Ujl

Condition: new, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, hydraulic cross locking Body: 26t hooklift system for containers from 4.3m to 6.6m, hook height 1,570mm, titanium version, hydraulic combined container locking (internal and external), mechanical lifting hook lock, plastic cover over control block, driver cabin control pneumatic, complete fast motion system, oil tank supplied with 2" hoses & connection materials, 84l standard pump, anti-slip installation kit for 14mm bolts, equipment length: 5,500mm! 4th control block for additional hydraulics. Surcharge for retrofitting radio remote control: EUR 6,000.00 Underrun protection available for an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Ksdpfowngm Tox An Ujdl

Condition: new, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, hydraulic cross locking. Build: 26t hookloader system for containers from 4.3m to 6.6m, hook height 1,570mm, titanium version, hydraulic combined container locking system (internal and external), mechanical pick-up hook locking, plastic cover over the control block, pneumatic cab operation, complete high-speed mode, oil tank supplied with 2" hoses & connection materials, standard pump 84l, mounting kit torsion-resistant for 14 mm bolts, device length: 5,500mm! 4th control block for additional hydraulics. Surcharge for radio retrofit EUR 6,000.00 Underrun protection available at extra cost! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale, and errors excepted! Kedpfx Anewngnde Uodl

Condition: new, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, hydraulic transverse locking. Superstructure: 26t hooklift system for containers from 4.3m to 6.6m, hook height 1,570mm, titanium version, hydraulic combined container locking (inside and outside), mechanical pick-up hook locking, plastic cover above the control block, driver’s cab operation pneumatic, complete high-speed mode, oil tank supplied with 2" hoses & connection materials, 84l standard pump, mounting kit torsion-resistant for 14 mm bolts, device length: 5,500mm! 4. Control block for additional hydraulics. Surcharge for retrofit radio control EUR 6,000. Underride guard available at an extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Kdodpfxowngnwe An Uol

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, VECOPLAN 55/18/3 Mill Inlet width: 550 mm Inlet height: 180 mm Main motor: 55 kW Number of lower drive axles: 2 Bottom drive motor: 3 kW Number of upper drive axles: 1 Upper drive motor: 3 kW Pneumatic guard opening Kjdpfx Aswiuywsn Ujdl Electrical panel Ready for operation Year of manufacture: 2000

Condition: new, Chip Screen Manufacturer: Vecoplan Module: VSS 15/2 Year: 2016 Screening area: 1.5m2 Number of screen floors: 2 pcs Length: 3900mm Width: 1750mm Kdedpfx Aowqmpaen Uol Height: 1950mm Weight: 2300kg

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2020, loading space length: 13,490 mm, loading space width: 2,480 mm, loading space height: 2,640 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,730 mm, color: red, Year of construction: 2020, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 6.791 kg Carrying capacity: 26.209 kg GVW: 33.000 kg Functional Make of bodywork: Schmitz CargoBull Ferroplast Maintenance, history and condition Number of owners: 3 APK (MOT): tested until 07/2026 Technical condition: good Visual appearance: good Product safety Kedpfxsy Talto An Uedl Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute Ksdpfxjyzr Tfe An Uedl - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), mileage: 20,274 km, power: 169 kW (229.78 HP), first registration: 12/1999, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, number of seats: 7, total length: 8,700 mm, loading space length: 8,700 mm, Year of construction: 1999, Structure Volume: .55 m3 Tank capacity: 5500 liters = More information = General information Number of doors: 4 Cab: double Axle configuration Front axle: Steering Rear axle: Double wheels Weights GVW: 15.000 kg Functional Make of bodywork: GRASSO SHELL Water tank: 5.500 l Extendable superstructure: Yes Condition Kdsdpoyzkbnjfx An Uol Technical condition: very good Visual appearance: very good Damages: none = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5500 mm, width 2100 mm - 2 decks * Screen opening upperdeck: [] 18 mm. * Screen opening lowerdeck: [] 8 mm. * Driving: 30 kW E-motor Kedpfxsywmpmo An Uedl * Incl.: springs.

Condition: ready for operation (used), * Brand: Krupp * Surface: 5500 x 2100 mm - 2 decks * Upper deck: sieve opening [] 35mm Kjdpeywmc Tefx An Uedl * Lower deck: sieve opening [] 16 x 3mm * Driving: 22 kW * Incl.: springs and spring consoles * Stock: 2 pieces

Condition: used, Technical specifications: Briquette diameter: 60 mm Kedpfx Aoy R Sp Eon Uodl Briquette length: 50 mm Hopper diameter: 900/1000 mm Hopper height: 930 mm Hopper capacity: 840 L Throughput: 60 kg/h Power supply: 400V Motor power: 7.5 kW Emergency stop switch Overall dimensions: Length: 1200 mm Width: 1600 mm Height: 1500 mm

Condition: good (used), Contact via WhatsApp or gbagger from renowned German manufacturer RSP in very good condition, ready for immediate use, few operating hours and very well maintained. Ksdpfjvkpl Esx An Uodl

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 5,500 kg, fuel type: electric, – Manufactured in Poland – Year of manufacture: 2019 Kdjdpfjyw Sqiox An Ujl – Vibratory feeder TECHNICAL SPECIFICATIONS: – Inlet width: 650 mm – Inlet height: 250 mm – Shaft diameter: 600 mm – Shaft width: 650 mm – Main motor: 110 kW – Number of knives: 2 pcs. – Knife length: 650 mm – 4 lower driven toothed shafts – Lower shafts motor: 4 kW – 3 upper driven toothed shafts – Upper shafts motor: 4 kW – Vibratory feeder length: 5000 mm – Vibratory feeder width: 620 mm – Vibratory feeder motor power: 4 kW – Feed forward / reverse – Screen: 100 x 80 mm – Hydraulic lifting of shafts and cover – Hydraulic pump motor power: 1.1 kW – Transport dimensions (L/W/H): 820 / 180 / 190 cm – Weight: ~5400 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 9,100 mm, total height: 2,900 mm, total width: 4,600 mm, product height (min.): 20 mm, product length (max.): 6,200 mm, product width (max.): 2,600 mm, overall weight: 40,500 kg, Double production solar panel laminating machine The laminator is used for manufacturing solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. The materials are laminated under the influence of pressure and temperature. The lamination process is conducted under vacuum to prevent unwanted entrapped gases in the final product. Finally, the finished laminate is conveyed out of the laminator. Kdodoxzrvkspfx An Usl The machine comes with many spare parts and can be seen in operation.