Used Valk Welding Panasonic Tm 1400 G3 + Ewm Tetrix 352 Ac for sale (19,859)

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. Hjdpfxsy Efmge Aqtjr This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: like new (used), functionality: fully functional, EWM acticARC Tetrix T352 AC/DC robotic TIG welding machine with cooling unit Very good condition Hjdpfx Aqszl Ac Ajtor Used very little Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping within Germany is possible for €100 gross. Shipping costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify the country, city, and postal code. Freight costs on request – please specify the delivery address.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 89518, type of input current: three-phase, welding current (min.): 5 A, welding current (max.): 350 A, EWM Tetrix 350 AC/DC HF water-cooled TIG welding machine – 350 A For sale is a high-quality EWM Tetrix 350 AC/DC HF TIG welding machine from the inventory of Syntegon Technology GmbH. The machine was used in an industrial environment and is being sold as part of an inventory reduction, as it is no longer needed for production. The machine is fully functional and has been regularly maintained and inspected. The annual safety inspection certificate is available. This welding machine is suitable for both demanding TIG welding applications and electrode welding. The AC/DC technology allows for the processing of steel, stainless steel, and aluminum materials. Technical data: Manufacturer: EWM Model: Tetrix 350 AC/DC HF Year of manufacture: 2004 Welding current range: 5 – 350 A Power supply: 400 / 415 V Welding processes: TIG and electrode Water cooling with water cooler Torch included Condition: Functional Safety inspected Used, from ongoing production The machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair facilities that are looking for a reliable industrial welding machine. Inspection is possible by prior appointment. Loading can be arranged. Important conditions: Please note that the sale of this machine is only possible under the following conditions: Hodpfezlrnnex Aqtjr • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at the buyer's risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: excellent (used), Turntable length: 3330 mm Max. load capacity: 500 kg Rotational speed: 16 rpm PANASONIC robot – serial number A0225 M Max. payload: 6 kg Reach: 1374 mm Control unit: YA-1TCR61E00 Hodpfew U Agbsx Aqter Safety cabin with ALBANY ASSA ABLOY doors Dimensions: 9400 × 2600 × 2900 mm Weight: approx. 5000 kg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, open-circuit voltage: 87 V, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 220 A, input current: 25 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 300 A, input frequency: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Including Cool XQ 41-1 cooling module Hedpoy Sxkfsfx Aqter Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, For sale: EWM Tetrix XQ 400 Puls AC/DC W Expert welding machine including accessories (TIG Speed continuous drive 45 coldwire wire feeder/ABITIG 500W MT 4m torch/others). The system was purchased as an add-on for a BOKI linear welding automaton, intended for longitudinal welding of aluminium tubes/sheets. Welding was successful; however, the project was ultimately not realized. The equipment has run for approx. 20 hours = like new condition. Original price: CZK 354,800. Hjdpey Hpamofx Aqter

Condition: excellent (used), Year of manufacture: 2005 Maximum reach: 1374 mm Maximum payload: 6 kg Number of axes: 6 Axis ranges: J1 +170° – 170° Hsdpoxnml Tofx Aqtor J2 +155° – 90° J3 +90° – 80° J4 +270° – 270° J5 +90° – 150° J6 +400° – 400° Control unit: Panasonic WG-E1400 Power source: Panasonic YD-500AF2 Two Panasonic YA-1GJB11 positioners Max. positioner load capacity: 200 kg

Condition: excellent (used), Maximum reach: 1374 mm Control: Panasonic WG-E1400 Hodpfxoxnmqcj Aqtjr Source: Panasonic YD-500AF2 Two rotary positioners

Condition: ready for operation (used), Year of construction: 2012, number of axes: 6, This 6-axis PANASONIC TA-1800 robot welding cell was manufactured in 2012. It features a maximum reach of 1796 mm, providing flexibility for various welding applications. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800 robot welding cell we have for sale. Contact us for further details. Hjdpfxjzatide Aqter • Robot max distance 1796mm • Robot min distance 472mm

Condition: used, We offer air conditioning outdoor units in package deals with a mix of brands such as Panasonic, Mitsubishi, and Carrier (and similar top brands, depending on availability). These packages are ideal for trade, export, and installers looking to purchase in bulk. Hjdpeycr Scjfx Aqtor The packages are sold at a single fixed package price. No individual sales. If interested, feel free to send a message.

Condition: ready for operation (used), Year of construction: 2008, number of axes: 6, This 6-axis PANASONIC TA-1800WG Welding Robot was manufactured in 2008. It includes a 350A welding source, a VWP 316/351/95-3 welding gun, a BRG 2000 mechanical cleaner, an 800mm plinth, and a 750 H-manipulator. If you are looking to get high-quality welding capabilities, consider the PANASONIC TA-1800WG machine we have for sale. Contact us for more information. Hedpfxjyfd N Ej Aqtjr • 6-axis welding robot Additional equipment • Welding source: 350A (SP-Mag / Hyper Dippulse) • Welding gun: VWP 316/351/95-3 • Mechanical cleaner: BRG 2000 • Plinth: TA, H=800 mm • H-manipulator: 750

Condition: used, Year of construction: 2003, functionality: unexamined, ABB IRB 1400 M2000 Robotic Welding Cell – Suitable for Parts or Refurbishment – Ireland Location: Ireland Condition: Used Power: 400V, 3 Phase Complete ABB robotic welding cell featuring an ABB IRB 1400 M2000 6-axis industrial robot with controller, teach pendant, dual-station welding fixture and full safety enclosure. Originally configured as a production robotic welding system (Plant Ref: XRWO11). This system is suitable for refurbishment, retrofit, or breaking for parts and spares. Can be sold complete or dismantled and sold separately. Included in Sale: • ABB IRB 1400 M2000 6-Axis Robot • ABB S4C+ Controller Cabinet (400V 3-Phase) • ABB Teach Pendant • Dual-Station Welding Fixture / Positioner • Robot Pedestal Base • Full Steel Safety Enclosure / Welding Booth Robot Specifications: Model: ABB IRB 1400 M2000 Axes: 6 Reach: Approx. 1.44m Payload: 5–6 kg Repeatability: ±0.05 mm Manufactured in Sweden System is complete as seen in photos. Industrial used condition. Operational status not confirmed. Ideal for buyers looking for spare parts including robot arm, controller, drives, teach pendant, servo motors, or welding fixtures. Hjdpfjymd E Nsx Aqtor Components can be removed and sold individually if required. Forklift loading available. Inspection welcome by appointment. Asking Price: €5000+ VAT (or nearest offer) Enquiries welcome for complete system or individual components.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Hsdpozikhbofx Aqtsr Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, SURFACING AND JIG BORING MACHINE DUAP ZS 80/1400 • Maximum piece length: 1500 mm • Minimum piece length: 70 mm • Maximum piece diameter: 80 mm Hsdpfx Aqozcprmotjr • Minimum piece diameter: 10 mm

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Hodshpf Iyepfx Aqter Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition Hjdpfeycv Sajx Aqtor

Condition: used, Year of construction: 2009, faceplate diameter 1800 mm swing diameter 2000 mm turning height 1500 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min power capacity - table 100 kW Torque 31784 Nm total connected load 218 kW weight of the machine ca. 55 t Turning- and Boring heads: - 4 x Turning heads + steelholders - 3 x Turning heads for Capto - 1 x Boring head (driven) - 2 x angular boring heads (Manufacturer Benz) Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min Hodpfxevylilj Aqtsr - Axis C 3.25 rpm Coolant system: - Coolant system filter system 1500 l Chain tool magazine with 80 places: - max. tool weight 30 kg - Max. tool diameter with free auxiliary slots 250 mm Disk magazine with 12 slots: - max. weight of tool holders/accessory units 150 kg - max. length of tool holders 500 mm - max. magazine load 1000 kg Pallet changer with 2 pallets: - Pallet diameter 1800 mm - Pallet load capacity (centered) 5000 kg - Pallet load capacity (on center) 4000 kg Equipment / accessories: - 1x pallet with claw boxes, diameter 1800 mm - 1x hydraulic chuck with base jaws, diameter 1800 mm - Various drilling and milling heads - Various turning tool holders - 2x measuring probes

Condition: good (used), MERKLE Insquare W 300 AC/DC lasapparaat met originele kabelset Primair: Spanning: 3 x 400 V Frequentie: 50 (60) Hz Cos phi: 0,95 TIG DC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire maximale stroom: 19 A TIG AC stroombereik: Open circuit spanning: 80 V Werkspanning: 10-22,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 9,5 kVA Primaire continue stroom: 13,7 A Primaire piekstroom: 19 A MMA-lassen: Stick-elektroden: 1,5-6 mm Open spanning: 80 V Werkspanning: 20-32,8 V Lasstroom: 5-320 A HSB 60% inschakelduur (10 min.) 320 A HSB 80% inschakelduur (10 min.) 300 A DB 100% inschakelduur: 260 A (40 °C) Primair continu vermogen: 13,1 kVA Primaire continue stroom: 19 A Primaire piekstroom: 22 A Lasproces: 10-standenschakelaar: TIG DC Min, TIG DC Plus, TIG DC Min met startpuls, TIG AC Geluidsarm, TIG AC Blokgolf TIG AC "Gebalanceerde TIG", Elektrode Min Elektrode Plus Elektrode "Sinusgolf" Elektrode Blokgolf Keuzeschakelaar 1: 10-standenschakelaar: Stroom 1, Tijd 1, Stijg- en daaltijd, Startstroom, Eindstroom, Ontstekingspuls, Punttijd, Gasvoor- en nastroomtijd Keuzeschakelaar 2: 9-standenschakelaar: Hodol Sm Hbjpfx Aqtor Stroom 2, Tijd 2 (voor pulsmodus), AC Balans, AC Frequentie, Hotstarttijd en -stroom, Stroominstelling, Elektrode d, Display U Instellingen: 2 draaiknoppen voor keuzeschakelaars 1 en 2 Displays: 2 LED-displays met voorloop- en hold-functie voor stroom, spanning, tijd Tijdfuncties: 4-standenschakelaar: UIT, langzame puls, snelle puls, puntlassen Ontsteking: 4-standenschakelaar: UIT, hoogfrequent, Lift-Tig Energieregeling: 4-standenschakelaar: op het systeem, hand- of voetafstandsbediening, lastoorts Bedrijfsmodus: 4-standenschakelaar: 2-takt, 4-takt, 4-takt met 2 stromen, gastest, test, programma Programmageheugen: 20 vrij toewijsbare geheugenplaatsen AC-frequentie: 50-200 Hz AC-balans: 9-91% Gasvoorstroomtijd: 0-3 s Gasnastroomtijd: 0-25 s Stroomstijgingstijd: 0-2 s Stroomdalingstijd: 0-20 s Ontstekingspuls: 0-100 ms Puntlastijd: 0,1-2,5 s Langzame pulsen: 10 ms-2,5 s Snelle pulsen: 50 Hz-5 kHz Hotstarttijd: 0-1,5 s Hotstartstroom: 10-200% Stroominstelling: 100-250% Knop: Testbeveiliging Knop: Programmaselectie LED: Netspanning AAN, Overtemperatuur, Storing, Beveiligingscircuit, Display hold, Startstroom Stijging, Stroom 1, Stroom 2, Reductie, Eindstroom Stroombron: IGBT-omvormer Ontsteking: Hoogfrequent of Lift-Tig Norm: EN 60974-1 "S" / CE Toortsaansluiting: EURO-centrale aansluiting met 5-polige stekker Toortskoeling: Watergekoeld koelsysteem 50 mm² aansluiting: Werkstukkabel 50 mm² aansluiting: Elektrodelaskabel Netaansluiting: 4 x 4 mm², 5 m lang Gasaansluitslang: 2 m Gewicht: 130 kg (300 AC/DC) Afmetingen L x B x H: 910 x 600 x 910 mm met gasfleshouder Gasfleshouder: 10 - 20 - 50 l gasfles Financing through our bank is also possible. komplett-konzept.leasingo.de Vind meer artikelen - nieuw en gebruikt - in onze shop! Internationale verzendkosten op aanvraag!

Condition: used, machine/vehicle number: 097 - 004886-25012, wire diameter 1.2 mm weight 232 kg Hjdjtyq E Aspfx Aqter unalloyed solid wire electrode - copper-plated extremely low spatter in all power ranges optimal for automated welding

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet synchronous motor, serial number: 68352, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire about the costs for packaging and shipping separately! Hsdpfx Aqji D Ii Ietor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19200, type of input current: three-phase, type of cooling: water, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: type plate available, EWM TIG 300 DC HF TIG welding system with water cooling – functional For sale is a high-quality welding system from Syntegon’s production stock. The system is being sold due to a change in production processes or because it is no longer needed and comes from industrial use. The unit is functional and has been regularly inspected. The annual safety inspection report (UVV) is available. Technical data Manufacturer: EWM Model / Type: TIG 300 DC HF Year of manufacture: 1999 Serial number: 98350019004 Inventory number: 679 361 System number: 7000 1520 Welding process: TIG (GTAW) and SMAW (shielded metal arc welding) Welding current: 5 – 300 A Mains connection: 400 V Equipment TIG torch included Water cooling Integrated water cooler included Condition Functional Annual safety inspection report (UVV) available Used, from ongoing industrial operation Important conditions: Giscl Iozhnbpsdcwwjw Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Dismantling, removal and transport are the responsibility of the buyer and at his own risk. • The buyer provides personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Hsdpszlrkijfx Aqtor If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 98350019004, type of input current: three-phase, type of cooling: water, welding current (min.): 5 A, welding current (max.): 300 A, Equipment: type plate available, EWM TIG 300 DC HF TIG welding system with water cooling – functional For sale is a high-quality welding system from Syntegon’s production stock. The system is being sold due to a change in production processes or because it is no longer needed and comes from industrial use. The unit is functional and has been regularly inspected. The annual safety inspection report (UVV) is available. Technical data Manufacturer: EWM Model / Type: TIG 300 DC HF Year of manufacture: 1999 Serial number: 98350019004 Inventory number: 679 361 System number: 7000 1520 Welding process: TIG (GTAW) and SMAW (shielded metal arc welding) Welding current: 5 – 300 A Hjdpjzlrdcsfx Aqtor Mains connection: 400 V Equipment TIG torch included Water cooling Integrated water cooler included Condition Functional Annual safety inspection report (UVV) available Used, from ongoing industrial operation Important conditions: Giscl Iozhnbpsdcwwjw Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales / Transfer conditions: • Dismantling, removal and transport are the responsibility of the buyer and at his own risk. • The buyer provides personnel, tools and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can discuss the further details directly.

Condition: ready for operation (used), Panasonic Panadac 337N-01 Pulse Motor Driver, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hjdpfx Aqji Eccmetsr

Condition: ready for operation (used), Panasonic Panadac 337N-02 Pulse Motor Driver, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hodpfxoi Eccqj Aqtor

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals Hedpfoyililex Aqter The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Connection options for remote control and torch functions for added convenience. Splash-proof housing rated to IP23, suitable for tough workshop environments. Energy-efficient operation thanks to high efficiency and standby function. Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors.