Used Vöest Lathe for sale (5,407)

Condition: good (used), Year of construction: 1986, CNC lathe VOEST-ALPINE, Type: WNE570X1000, Year of manufacture: 1986, from first owner, in original condition. The machine has only processed plastic. Guide rails are in very good condition. Equipped with a RÖHM 315 mm chuck, Sauter 8-position tool turret, VDI 40, with various tool holders, and tailstock MK 5. Control system: SIEMENS 810T, coolant system, machine fuse, complete machine documentation available, data backup. Turning diameter over the bed: 570 mm Turning diameter over the cross slide: 280 mm Distance between centers: 1000 mm Pgodozw Evcspfx Ad Sjr Spindle speeds: 16 - 3150 rpm, spindle motor: 22 kW. Further data, see data sheet. The machine can be demonstrated while powered on.

Condition: ready for operation (used), Year of construction: 1991, Turning lathe, VOEST-ALPINE-STEINEL, Type: DA 180, Year of manufacture: 1991, with 2-axis digital display ELESTA. Center height: 180 mm Distance between centers: 1000 mm Spindle bore: 52 mm Spindle speeds: 44-2000 rpm Chuck diameter: 200 mm, Tool holder: MULTIFIX - B. Pgodpfeziwy Rsx Ad Ssr In ready-to-use condition.

Condition: excellent (used), Voest DA 180 Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: VOEST ALPINE Lathe Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981 Pedpfxjxp I D To Ad Sjgr Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Coolant system Motor: 380 Volt, 5.5 kW 12 spindle speeds: 44 - 2,000 rpm 66 longitudinal feeds: 0.072 - 4.038 mm/rev 66 cross feeds: 0.036 - 2.019 mm/rev 66 metric threads: 0.5 - 28 mm 66 inch threads: 1 - 32 TPI 66 module threads: 0.25 - 14 66 DP threads: 2 - 112 3-jaw chuck Weight approx. 1,200 kg Accessories and Equipment: 1 piece Röhm 3-jaw chuck 200 mm Multifix size B Digital readout About the Machine: We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. You can find further drilling machines from reputable manufacturers on our website.

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Psdpfx Adjma Snxo Sjgr

Condition: reconditioned (used), Product information "Voest Alpine DA 160" Voest lead and feed spindle lathe Model DA 160 Condition: Refurbished Technical data Center height: 165 mm Distance between centers: 650 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 190 mm Bed width: 210 mm Lead spindle diameter: 25 mm Chuck diameter: 160 mm Tailstock spindle: MK 3 Spindle speed (16): 30 - 2500 rpm Motor power: 2 / 2.4 kW Quill stroke: 100 mm Dimensions (L x W x H): 1500 mm x 900 mm x 1650 mm Pgjdpey Ndqrofx Ad Sor Equipment: - Geometry report - 3-axis digital display, Sino brand - NEW - 3-jaw chuck - Emergency stop button - Quick-change tool holder system Multifix, number of holders 6 - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with taper shank - Follower point - Lead and feed spindle cover NEW - Chuck guard, limit switch secured - Operating tool - Operating manual - Machine feet

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Podpfx Adozfguio Sjgr Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Condition: used, Lang Centre Lathe, Approx 7.6m Between Centres x 800mm Swing Over Bed, 400mm Swing Over Saddle, Fitted with 4 Jaw Chuck (750mm Diameter) , 2 Fixed Steadies Pgsdszvrn Njpfx Ad Ssr

Condition: used, Year of construction: 1980, centre distance 1500 mm 210 serial number 1289 Podpsztfu Rjfx Ad Sogr multifix ja ja weight 1,45 t

Condition: like new (used), Year of construction: 2023, functionality: fully functional, spindle bore: 77 mm, turning diameter: 300 mm, turning diameter over bed slide: 470 mm, turning length: 1,120 mm, Strung CNC VOEST-ALPINE WNC 300S – Modernizat complet în 2023 cu comandă NCT nouă. Se oferă spre vânzare strung CNC profesional VOEST-ALPINE WNC 300S, un utilaj industrial robust, construit în Austria, recunoscut pentru rigiditatea structurală, precizia ridicată și fiabilitatea în exploatare. Mașina a beneficiat în anul 2023 de o modernizare majoră, fiind echipată cu un sistem de comandă CNC NCT de ultimă generație, investiție ce a depășit aproximativ 10.000 Euro doar pentru partea de control și automatizare. Noua comandă NCT transformă utilajul într-o mașină modernă, intuitivă și ușor de operat, oferind funcționalități actuale de programare, diagnosticare și control al procesului de prelucrare. Interfața este dotată cu ecran tactil generos, care permite operarea rapidă și acces facil la toate funcțiile mașinii. Psdpfx Aszcy Dyod Ssgr Pe lângă modernizarea electronică, utilajul a beneficiat de numeroase optimizări mecanice și ergonomice menite să îmbunătățească productivitatea și confortul operatorului: ușă de acces și inspecție reproiectată, cu deschidere mai mare; suprafață vitrată extinsă pentru vizibilitate excelentă asupra zonei de lucru; geam de siguranță industrial de înaltă rezistență; modificarea și optimizarea sistemului de comandă a universalului; deschidere și închidere automată a bacurilor prin pedală; îmbunătățiri ale circuitelor de automatizare și exploatare; acces mult mai facil pentru reglaje, măsurători și supravegherea procesului de prelucrare. Utilajul se află în stare tehnică foarte bună, fiind complet funcțional și pregătit pentru producție imediată. Lucrează cu toleranțe strânse și oferă stabilitate excelentă inclusiv în operații solicitante de strunjire. Poate fi verificat și testat în funcționare. Deși a fost achiziționat și instalat pentru dezvoltarea activității, mașina nu a fost exploatată în mod semnificativ din cauza lipsei comenzilor, motiv pentru care se oferă acum spre vânzare. Caracteristici tehnice principale Producător: VOEST-ALPINE (Austria) Model: WNC 300S Sistem de comandă: NCT (modernizare completă în 2023) Diametru maxim peste batiu: aproximativ 470 mm Diametru maxim peste sanie: aproximativ 345 mm Lungime de strunjire: până la 1120 mm (în funcție de configurație) Alezaj ax principal: 77 mm Turație arbore principal: până la 3000 rpm Putere motor principal: 37,5 kW Turelă portscule cu 12 poziții Posibilitate utilizare scule antrenate (în funcție de configurație) Contrapunct pentru prelucrarea pieselor lungi Construcție industrială grea pentru absorbția vibrațiilor și menținerea preciziei Greutate utilaj: aproximativ 6 tone, în funcție de echipare. Avantaje pentru cumpărător ✔ Comandă CNC NCT nouă, modernă și intuitivă ✔ Investiție recentă importantă în modernizare ✔ Precizie ridicată și funcționare stabilă ✔ Construcție industrială robustă VOEST-ALPINE ✔ Vizibilitate excelentă asupra procesului de lucru ✔ Automatizare îmbunătățită pentru manipularea universalului ✔ Costuri reduse de punere în funcțiune – utilaj pregătit de lucru ✔ Posibilitate de probă și verificare înainte de achiziție Strungul reprezintă o alegere excelentă pentru ateliere de prelucrări mecanice, producție de serie mică și medie, execuția de piese de precizie, reparații industriale și lucrări complexe de strunjire care necesită rigiditate, putere și repetabilitate ridicată.

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Pgsdpfx Adoykca Ho Ser Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine Pgjdpfx Adozul Utj Sor High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: refurbished (used), Year of construction: 1984, The lathe has undergone a Retrofit 2025 and is in perfect condition. It has been geometrically overhauled. The bed has been reground, and all guides have been scraped. The headstock and tool post have been disassembled into their individual components, cleaned, and reassembled. Everything has been stripped of its old paint and repainted with a new powder coating. A measurement report is included. The machine weight is 4000 kg. The original documentation and extensive accessories are included. 1 pallet containing approximately 13 Multifix C holders with turning tools is available and is part of this listing! Psdpfx Ajyutlujd Sogr

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Psdpfx Aszul T Nsd Sjgr Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min Pgsdpoxn Ty Rjfx Ad Sjr turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg Number of feed stages and threads: 99 Accessories: 3-axis digital display Mobile chip guard over the entire length (plexiglass) Coolant device Rapid traverse in Z and X axes Multifix steel holder size C with 6 interchangeable cassettes Bed stop with micrometer scale Fixed steady rest - 300 mm Taper sleeve for main spindle MK 6 Travelling center point (center point) MK 6 Bed guides in very good condition!

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, turning length: 50 mm, turning diameter: 45 mm, travel distance X-axis: 180 mm, travel distance Y-axis: 200 mm, controller model: Mitsubishi FCA70LPC-V, TECHNICAL DETAILS Turning diameter: 45 mm Turning length: 50 mm Travel range X-axis: 180 mm Travel range Z-axis: 200 mm Rapid traverse X/Z-axis: 20 / 30 m/min Pedpfx Aszul R Ujd Sjgr Spindle speed: 8,000 rpm MACHINE DETAILS Control system: Mitsubishi FCA70LPC-V Dimensions & Weight Machine weight: approx. 1,600 kg Footprint: approx. 1,700 × 700 × 1,700 mm

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, turning length: 50 mm, turning diameter: 40 mm, spindle speed (max.): 8,000 rpm, controller model: Fanuc 0i-TD, TECHNICAL DETAILS Turning diameter: 40 mm Turning length: 50 mm Podpfezul Srox Ad Sjgr Travel range X-axis: 180 mm Travel range Z-axis: 200 mm Rapid traverse rate X/Z-axis: 15 m/min Spindle speed: 8,000 rpm MACHINE DETAILS Control system: Fanuc 0i-TD Dimensions & Weight Footprint: approx. 1,500 × 700 × 1,600 mm Machine weight: approx. 1,500 kg

Condition: excellent (used), Year of construction: 1995, Maximum distance between centers: 1,000 mm Pgedozd S Daspfx Ad Ssr Diameter over lathe bed: 410 mm Spindle bore: 54 mm Taper for tailstock: MK 4 Machine weight: approx. 2.1 tons Includes: 3-jaw chuck Includes: Multifix quick-change tool holder Includes: Live center

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 145 mm, turning diameter: 168 mm, travel distance X-axis: 130 mm, travel distance Y-axis: 110 mm, controller model: FANUC 31i-TA, TECHNICAL DETAILS Turning diameter: 168 mm Turning length: 145 mm X-axis travel: 130 mm Z-axis travel: 110 mm Spindle speed: 45–6,000 rpm MACHINE DETAILS Control system: FANUC 31i-TA EQUIPMENT 2 × Portal clamping system 2 × Part chute for inspected parts 2 × 3-jaw chuck, SMW Autoblok, Type BHM 165, 152.4 mm (6 inches) SMW Autoblok hydraulic cylinder, Type SIN-S 100, left SMW Autoblok hydraulic cylinder, Type VNK 70/37, right Chip conveyor, discharging to the rear of the machine Air-controlled part clamping monitoring, right Part clamping monitoring, on both sides 4-position spindle orientation, on both sides Coolant injection in the chuck via Deublin rotary distributor, on both sides Automatic coolant pump with 200 l tank capacity 2 × 8-station turret Signal light with traffic light design Preparation for oil mist extraction Automatic machine shutdown Automatic central lubrication RS-232-C interface Psdpfx Ajzul Rujd Segr External transformer 10 × Boring bar holders 3 × Turning tool holders, right 3 × Turning tool holders, left Customer macro B Turning cycles

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Pgodjwxfaaspfx Ad Sjr

Condition: used, Year of construction: 1995, turning diameter 720 mm turning length 3000 mm control Siemens 805 turning diameter over slide 430 mm turning speeds 1800 U/min tailstock quill taper MT 6 steady 3 Stück main drive motor 36 kW z-axis 3050 mm Pgjdpeyqvbdefx Ad Sor x-axis 410 mm swing diameter over slide rest 430 mm spindle motor 28 kW workpiece weight 3000 kg spindle passage 106 mm 3-jaw-chuck diameter 305 mm total power requirement . kW weight of the machine ca. 6 t dimensions of the machine ca. 4x2,4x2 m Steady rest 1: Diameter: 120-300 mm Steady rest 2: Diameter: 220-400 mm Steady rest 3: Diameter: 350-500 mm Chuck: Diameter: 315 mm Maximum workpiece weight: 3 t (with steady rest) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm Pjdpfxsxdmgvo Ad Sogr CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Pgjdpfxjzul Tve Ad Ssr Total power requirement: 5.5 kW Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,975 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, center width: 600 mm, center height: 340 mm, controller model: Siemens Sinumerik 840D SL, TECHNICAL DETAILS Maximum turning height: 340 mm Turning diameter over bed: 680 mm Turning diameter over slide: 565 mm Distance between centers: 600 mm Spindle bore: 65 mm Spindle speed: 0–5,000 rpm Travel in X-axis: 260 mm Travel in Y-axis: 635 mm Psdpfx Adozuwx Ds Sjgr MACHINE DETAILS Control system: CNC Controller: Siemens Sinumerik 840D SL Power: 25 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,500 x 2,300 mm Weight: 6,500 kg Operating hours: 10,975 h EQUIPMENT Documentation CE marking CE certificate

Condition: ready for operation (used), functionality: fully functional, turning length: 230 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, controller model: Fanuc Series O-T, The machine was manufactured in the 1990s. TECHNICAL DETAILS Turning diameter: 190 mm Pgsdpfxszul Uyo Ad Ssr Turning length: 210–230 mm Diameter over bed: 190–200 mm Travel in X-axis: 125 mm Travel in Z-axis: 195 mm Spindle speed range: 6,000 rpm Spindle bore: 43 mm MACHINE DETAILS Control system: Fanuc Series O-T Machine weight: approx. 2,500 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), VOEST DA 360 / Heidenhain digital display -Center height above bed: 400mm -Turning diameter above bed: 800mm -Turning diameter above cross slide: 500mm -Turning length: 1000mm Pgjdpfeza Dh Rsx Ad Sor -Bar capacity: approx. 87mm -Spindle speed range: 14 - 1000 rpm / 18 spindle speeds -Automatic longitudinal / facing feeds -Automatic rapid traverse on Z-axis -Tailstock MK 5 -Collet chuck 250mm -Multifix base with inserts -Work light -Machine feet -Documentation Dimensions: L x W x H: 3 x 1.5 x 1.7 meters / Weight: 3500 kg Errors and omissions excepted.