Used Two Chamber Baler Orwak for sale (9,383)

Condition: good (used), engine 2,2 kW, press force 20 t, bale weight 200-250 kg, Machine Dimensions Height: 2440mm Width: 1185mm Length: 2480mm, Loading Aperture 1100mm x 700mm, Machine Weight 1565 Kg Nodpfxoyti H Se Abyedc

Condition: not inspected (used), Year of construction: 2016, 5 balers package: 2 x Orwak 3810, 3 x Orwak 3820 POWER. Conditions as they are- not us!!! Ndodpfxozquqvj Abyec

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 26 t, overall weight: 1,080 kg, Equipment: documentation/manual, In perfect condition, tested and fully equipped. New hydraulic hoses, new oil, and new gas springs for the doors. Ndsdpfx Aeztgnxebyec

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. Nedjvlpctjpfx Abyodc stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: used, Espec Type: TSD-100 New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design Nodpfjzizl Rsx Abyodc 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Bramidan B 20 Baler Bale dimensions – L x W x H (mm) 1200 x 800 x 800 Feed opening – L x H (mm) 1200 x 480 Pressing force 20 tons Motor (kW) 4.0 Cycle time (s) 36 / 21 Baler dimensions – L x W x H (mm) 1775 x 1030 x 2790 Weight (kg) 1600 Stroke (mm) 750 Number of bale ties 4 Year of manufacture 2012 - 2017 Price 4300 EUR Bramidan X25 – High-performance baler for compressing waste Suitable for various materials, including stretchable materials Ndsdpfx Aov Aku Sjbyec Large, wide chamber Safety locks to prevent the compressed material from expanding in the chamber Short cycle time allows for quick disposal of waste TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Hard plastics Textiles EPS polystyrene Steel cans BALE DIMENSIONS 1200 x 800 x 800 mm PRESSING FORCE 25 tons BALE WEIGHT Cardboard (kg): 200-300 Plastic film (kg): 250-350 Year of manufacture 2012-2018 Price 5500 EUR ORWAK 3410 For paper waste, film, cans, PET bottles. Pressing force 24 tons. Power supply: 3-phase 400 V, 50 Hz Bale dimensions Width: 1200 mm Depth: 800 mm Height: 1000 mm Bale weight: up to 400 kg Year of manufacture 2010-2013 Price 4000 EUR Orwak 3420 Year of manufacture 2014 Price 5000 EUR Bramidan 4-OS Baler - price 5200 EUR Pressing force 50 tons 4-X25 Baler - price 4500 EUR

Condition: good (used), Bramidan MC16 baler for waste paper Ndedpfx Aoz S Uniebysc Machine in perfect condition, like new. Purchased from storage; practically unused. Ideal for baling paper, waste paper, PET, plastic film, clothing, general waste, etc. Description: – Compact design, requiring minimal workspace – Bale weight: 250 kg – Large top-loading opening for waste – Two-chamber system – Intuitive control panel – Automatic piston return after the compression cycle – Maintenance-free hydraulic system – Easy bale removal thanks to an integrated ejection system – Bale-tying system Power supply: 380V, 50 Hz Pressing force: 16t Max. bale dimensions: 1100 x 800 x 700 mm External dimensions: 2540 x 1210 x 2570 mm Power: 4 kW Weight: 1220 kg Made in Denmark.

Condition: excellent (used), Year of construction: 2012, Tested, cleanded, full service was made. New oil. We have two Orwak 5030 balers. Last photo - green, refurbished 2017 - 2000 Eur. Ndedpsrxfn Uofx Abyjc

Condition: used, Orwak 3410 Swedish Industrial Vertical Paper Baler / Waste Baling Press (Pressing force 24t, 4 kW), Used Equipment Technical Data: Manufacturer: Orwak AB (Made in Sweden) Type: 3410 (Product No.: 4903410-00) Serial No.: 82268 Net Weight: 1350 kg Overall Dimensions (W × D × H): 1600 × 1100 × 3050 mm Bale Dimensions (W × D × H): 1200 × 800 × 900 mm Bale weight: up to 400 kg (Pressing force 24t, 4 kW) Electrical Data: Power Supply: 3 × 400 V / 50 Hz (3-phase) Motor Power: 4.0 kW Rated Current: 9.8 A Equipment and Features: Ndodpfxsz Rn Awj Abyoc Convenient, wide top loading opening for fast material loading Integrated strapping band holders for quick and easy bale tying Quiet, enclosed hydraulic operation with high compaction force Door mechanism with safety interlock Durable Swedish technology designed for exceptionally low maintenance costs

Year of construction: 2010, condition: good (used), Very good solution to use one press for two different materials and You don't have any problems to sort them later. Njdpfegzulusx Abyjdc Capacity 20 m3. 5,5 kW 400/32 A

Condition: ready for operation (used), Bramidan 4-0F Engine: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 cm Bale weight: 200-250 kg Pressure: 18 tons Weight: 1580 This machine is used to reduce the volume of waste materials such as film, paper, etc. Price: 4800 EUR Aventek MK 2500 baler This is an industrial baler for compressing waste materials such as: film cardboard/paper plastics Pressing force: 25 tons Bale weight: 400 kg, depending on the material Bale dimensions: approx. 1200 × 800 × 800 mm Cycle time: approx. 50 s Power supply: 400 V Engine power: approx. 5.5 kW Year: 2013 Price: 6500 EUR Nedpev Ai Uqefx Abyjdc ORWAK 9020 baler: - 2.2 kW engine - 380V - 20 tons pressure - bale dimension 1100x700x800 - bale weight: depends on the raw material, 200-300 kg Price: 5500 EUR

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Ndsdpfx Aboym U Sysyec Weight: 355 kg Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm.

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Ndjdpfxjym U Ins Abyoc Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 550 kg, Press for bin Ndodpsz Tiduofx Abyec

Condition: used, PROMEOS Gas-Fired Chamber Furnace For sale is a gas-fired industrial furnace with a maximum furnace temperature of 750 °C and a specified rated thermal output of 40–80 kW in total. The system is designed for operation with natural gas or propane and features two burner heads of type ECO 03-40. The furnace is from the year 2016. The last known maintenance was performed in 2021. Equipment and Features Nodpfx Abez Ipcxsyedc Gas-fired industrial furnace system Maximum furnace temperature of 750 °C Two burner heads Operation with natural gas or propane according to technical specifications Electrical connection with 400/230 V Industrial design Technical Data Manufacturer: PROMEOS System Designation: BA 31010.0484.0000 Year of Construction: 2016 Maximum Furnace Temperature: 750 °C Burner Heads: 2 × ECO 03-40 Rated Thermal Output: 4 × 10–20 kW Fuel: Natural gas type H, E, and L / Propane Gas Connection Pressure: 50 mbar Propane Consumption: approx. 3.9 m³/h Combustion Air Requirement: approx. 120 m³/h Exhaust Gas Mass Flow: approx. 165 kg/h Air Ratio: 1.35 ± 0.05 NOₓ Emissions at Rated Load: approx. 20 ppm CO Emissions at Rated Load: approx. 10 ppm Electrical Connection: 400/230 V AC, 3L/N/PE Electrical Connection Power: 4 kW Protection Class: IP54 Weight: approx. 4,700 kg Sound Pressure Level: ≤ 70 dB(A) Dimensions of the PROMEOS Chamber Furnace - Width: 2,800 mm - Depth: 2,700 mm - Height including lifting door: 3,400 mm “We offer a suitable bank financing option for your project – all from one source.” You can find more articles – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2017, functionality: fully functional, total width: 850 mm, total length: 1,320 mm, total height: 2,165 mm, For hazardous waste press into drum Ndjdpfx Asz Tg Drsbyjc

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods Ndsdpfxetvdcyj Abyoc 🔹 strands 🔹 wires 🔹 flat bars 🔹 cables The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland.

Condition: used, Conveyorized chamber vacuum packaging machine for industrial food processing This VC999 K7B2 is a conveyorized chamber vacuum packaging machine, built by VC999 Verpackungssysteme in Switzerland, with a stainless steel, all-enclosed construction that avoids sharp edges and corners where dirt could collect. The machine runs two to three cycles per minute and features bi-active sealing bars with electronic temperature control and adjustable contact pressure, allowing secure sealing even with greasy or moist products. The B-version adds a perforation blade with bag waste suction on both sides, so trim is removed automatically during the cycle. Evacuation stops at the evaporation point, protecting product quality throughout the process. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Conveyorized chamber vacuum packaging machine (belt) Output: 2–3 cycles per minute Sealing: Bi-active sealing bars, electronic temperature control, adjustable contact pressure Trim removal: Perforation blade with bag waste suction on both sides (B-version) Ndedpfoz Nc Nnex Abyoc Vacuum control: Evacuation stops at the evaporation point Construction: Stainless steel, all-enclosed

Condition: used, Padelttherm HGU 9408/800 Hearth Car Circulation Furnace For sale is a professional Padelttherm heat treatment system / hearth car circulation furnace, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth car furnace with circulation. Two chain conveyors are also part of the documented complete system. Technical data Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth car circulation furnace / heat treatment system Material to be treated: Aluminum housings Temperature / heating capacity - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. total load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower heating value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Circulation - 4 burners, each with 130 kW - 2 of these with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per circulator - 2 hot gas circulation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas circulator: 2 × 4.0 kW - Combustion blower: 7.5 kW - Lift door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch - Control behavior: PID - 10 programs - Display / operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni, Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Clear dimensions: 1,600 × 4,300 × 1,400 mm Nodez Hvzrjpfx Abyedc Furnace dimensions - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm - Depth incl. track: 10,165 mm - Height incl. door portal: 4,355 mm Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm - Weight: approx. 1,650 kg "Everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Hardy Type: Hardy TH453-W2E-II Never used (exhibition model) Water-cooled Here we offer an unused Hardy duplex climate chamber for temperature and humidity testing. The system has two test chambers arranged in a common housing. Both test chambers can be operated independently. This allows two different tests to be carried out simultaneously. The climate chamber is prepared for testing with lithium-ion batteries and is particularly suitable for batteries from power tools, e-bikes and comparable applications. Technical data Number of test chambers: 2 Operation of test chambers: independently of each other Test chamber volume: approx. 300 liters per test chamber Test chamber dimensions per test chamber: 850 × 600 × 600 mm, width × depth × height External dimensions: 1,150 × 2,115 × 1,922 mm, width × depth × height Temperature range: -45°C to +100°C Temperature deviation: ±0.5°C Temperature change according to data sheet: Ndjdpfszv Rrmsx Abyec Heating rate ≥ 2°C from +25°C to +100°C, empty and non-linear Cooling rate ≥ 2°C from +25°C to -45°C, empty and non-linear Humidity range: 20% RH to 98% RH Temperature range during humidity operation: +20°C to +85°C Condition: New Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), AFOS Defroster Njdpfex Ey Ufex Abyedc Model T1000 Defrost Twin Chamber Fully stainless steel Complete with refrigerator unit 400 v / 80 amps

Condition: used, Vötsch   Temperature Shock Chamber / 2-Chamber Shock Test System   Vötsch VT³ 7012 S2 Temperature Shock Chamber Warm chamber +50 °C to +220 °C / Cold chamber -80 °C to +70 °C 125 liter test chamber volume – Year of manufacture 2018 – water-cooled version   For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH.   The system is used for performing rapid and shock-like temperature changes and is particularly suitable for environmental simulation, Environmental Stress Screening (ESS), quality assurance, as well as stress and reliability tests of electronic components, assemblies, and other test specimens.   The VT³ 7012 S2 operates according to the 2-chamber principle with a warm and cold chamber. The test specimen is transported between the two temperature zones in a vertically moving test carriage and is thus subjected to rapid temperature changes.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Device type: Temperature shock chamber / 2-chamber shock test system Year of manufacture: 2018 Made in Germany   Test chamber volume: 125 liters Number of chambers: 2 Temperature range warm chamber: +50 °C to +220 °C Temperature range cold chamber: -80 °C to +70 °C Max. test weight / test carriage load: 50 kg Refrigeration unit: water-cooled   Refrigerant 1: R449A Refrigerant quantity: 1.70 kg GWP: 1,397 CO₂ equivalent: 2.37 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 1.27 kg GWP: 14,800 CO₂ equivalent: 18.80 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Operating pressure: 14 bar g   Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A   Test chamber dimensions (W × D × H): 470 × 650 × 410 mm External dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required room height for operation: approx. 2,450 mm Weight: approx. 1000 kg   Equipment:   2-chamber temperature shock system Vertically moving test carriage Programmable touch panel control CONTROLPAD for status display Temperature control Test chamber lighting Observation window Pipe connection Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / remaining runtime display USB and Ethernet interfaces   Areas of application:   Nodpfx Ajzzazuobyjdc Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Lifetime and stress tests   Condition:   Used Optical condition as shown in the pictures   Scope of delivery:   1x Vötsch VT³ 7012 S2 Temperature shock chamber Touch panel control Equipment and accessories as shown in the pictures   Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Shipping by freight forwarder is possible. Subject to change, errors and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Heraeus Type: HT 7012 S2 Heraeus Shock Test Chamber Temperature Shock Test Cabinet, Water-Cooled Two-Chamber Design Warm Chamber: The temperature control for the warm chamber ranges from +50°C to +220°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 11 K/min. Cold Chamber: The temperature control for the cold chamber ranges from -65°C to +70°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Temperature range, warm chamber: +50°C to +220°C. Temperature range, cold chamber: -80°C to +70°C. Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm. External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm. Rated power: 10 kW. Rated current: 25 A. Voltage: 3/N/PE AC 400 V +6/-10% 50 Hz. Refrigerant: R404A / R23. Weight: 1000 kg. For your safety as a buyer, please note the following information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. Refilling with refrigerants that comply with legal regulations. 3. Leak test with certificate. 4. After successful inspection, the chambers will undergo a test run, which is monitored with calibrated devices. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone. Ndodpfjzd R Azex Abysc

Condition: used, Heraeus Type: HT 7012 S2 Ndodpfx Abozd R Uwsyjc Temperature shock test chamber, water-cooled Two-chamber design Warm chamber: Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Liebisch Type: SKBWF 1000 A-TR Liebisch Constamatic Corrosion Testing Device Salt spray, condensation, and combined testing device with automatic control Data according to the nameplate: Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Test chamber: Test chamber volume: approx. 1000 liters Internal dimensions according to the data sheet: Width: approx. 1535 / 1425 mm Depth: approx. 800 / 780 mm Ndodpfx Abszba N Teyjc Height: approx. 660 / 650 mm External dimensions according to the data sheet: Width: approx. 2600 mm Depth: approx. 1120 mm Height: approx. 1210 mm Electrical data according to the nameplate: Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to the nameplate: S Watt: 2800 W K Watt: 2150 W B Watt: 500 W W Watt: 1700 W Technical data according to the data sheet: Max. test specimen load: 10 kg per level Test solution reservoir: approx. 150 liters Distilled water consumption humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling for bottom trough system: approx. 15 liters Testing procedures: DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 and other corrosion and combined testing procedures Equipment: Automatic control Touch panel / control panel Test chamber made of GRP Temperature test chamber connections Humidifier connections Connections for relative humidity Air pressure connection, two-component nozzle Flow control, test solution Test specimen grids / insert grids Test specimen holders NaCl test solution supply Deionized water supply Compressed air connection Weight: 450 kg Condition: Used equipment from industrial use. Optical condition according to the pictures. Inspection and testing on site are possible by arrangement and are highly recommended. Condition: used Scope of delivery: (See picture) Shipping or freight transport is possible. Subject to changes, errors and prior sale. We will gladly answer further questions by telephone.