Used Tracto-Technik Drilling Machine for sale (73,452)

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Isdpfxst Dk Uko Akpjtn Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Technical data: - Bending capacity Itjdpfx Aksztvgwepjn - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: used, functionality: unexamined, Year of construction: 2006, machine/vehicle number: 109, control type: NC control, actuation type: hydraulic, controller manufacturer: siemens, pipe diameter (max.): 80 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 1,500 kg, Equipment: CE marking, emergency stop, Tracto Technik mandrel bending machine TB 80 L Year of manufacture 2006 with bending tools 11/4", 11/2", 2" gas with mandrel rods and mandrels Tube feed length 4500 mm Bending direction: right Bending capacity up to tube 76.1 x 4.0 mm Maximum bending radius 200 mm Electro-hydraulic drive 3.5 kW 400 volts 50 Hz 3-phase Iedoz Rn Srepfx Akpstn Overall length 5615 mm Weight 1500 kg Freestanding bending head for maximum bending freedom Electronic bending axis control via touch panel, with setpoint/actual value display, automatic angle adjustment and memory function Tube clamping hydraulically, clamping pressure adjustable Glide block adjustment hydraulically Glide block unit rotating (glide guide) Bending mandrel extraction hydraulically Machine is mobile and can be used flexibly

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 150 kg, overall weight: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe, between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Maximum workpiece dimensions: 840 × 460 × 350 mm Maximum workpiece weight: 150 kg Work table dimensions: 600 × 300 mm Travel range X-axis: 350 mm Travel range Y-axis: 250 mm Travel range Z-axis: 350 mm Travel range W-axis: 350 mm Rotation speed C-axis: 300 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,200 x 2,200 mm Itjdpfx Akoz Il Eijpon Weight: 2,000 kg External Reference: Schönichen - Lot 12

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels, but without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Itjdpfxswnrt Se Akpjn Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1994, Max. Rohrverschiebelänge: 3.000 mm 4-fold bend angle selector with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Including pre-assembly device with hydraulic cylinder Deburring unit for tubes inner and outer from 6 - 48.3 mm Tools included in the delivery: Itjdpoy Spfgjfx Akpon Edge teeth: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bent shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Isdpfx Asx E Rdwskpotn Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: used, Year of construction: 1992, tube diameter 48 mm bending radius max. 90 ° Itjdpfxsz Dkyqj Akpen total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection - bending tools: 48.3; 42.4; 33.7; 1/2" - mandrel length: 4500 mm

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, clamping length: 3,200 mm, pipe diameter (max.): 30 mm, HEBÖ RBV 12 Pipe Drilling Machine Itjdjz Spx Aopfx Akpen - Through-hole diameter of the chuck: 30 mm FCA D-35614 Aßlar - loaded onto a truck.

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Isdowivn Nepfx Akpotn Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools *

Condition: used, Year of construction: 2018, power: 29.5 kW (40.11 HP), overall weight: 2,160 kg, Due to internal restructuring, we are offering the following machine from our inventory for sale: Description: HDD drilling rig Machine type: Grundodrill 4X Serial number: 4X1826295M Year of manufacture: 2018 Weight: 2,160 kg Iodpfx Aey Nmffskpstn Engine power: 29.5 kW Maximum operating pressure: 310 bar Length: 3,500 mm Width: 1,200 mm Height: 1,710 mm Maintenance and service were recently carried out by TRACTO. The unit is in working condition. Interested parties are welcome to submit their price expectations or make an offer. If you have any questions or require further information, please send us a message or give us a call.

Condition: ready for operation (used), type of input current: three-phase, spindle mount: MK 4, total width: 920 mm, total length: 2,310 mm, total height: 2,590 mm, overall weight: 3,962 kg, Kitchen and Walker Radial Drill Model: E2 5’-0” Spindle Taper: No 4 Morse Spindle Speeds: 25-1560 RPM Radius Of Spindle: Max: 1575mm Min: 430mm Traverse Along Arm: 1170mm Spindle To Base Plate: Max: 1257mm Min: 152mm Machine With: Ijdpfoz S Nndox Akpjtn Coolant and Fittings Safety Brake Box Table Ammeter Dimensions: 2310 x 940 x 2590mm Weight: 3962 Kgs

Condition: used, Year of construction: 1969, functionality: fully functional, overall weight: 5,500 kg, arm length 1600 mm taper MK 5 Würfel Itjdpfxox H Txts Akpen

Condition: ready for operation (used), functionality: fully functional, Outrigger drilling machine UCIMU RP 1580 MP Iodpfx Aoz S Nb Dokpetn -Outrigger arm approx. 2000mm -Speed range (gearbox) 30 - 1200 rpm -Automatic feed -Drilling table 1300x650x700mm -Morse taper MK 5 -Electrical safety device -Coolant system -Work light -Quick-change tool holder & adapter mounts Dimensions: L x W x H 2.5 x 1 x 2.85 meters / Weight 4500 kg Errors and omissions excepted.

Condition: used, Year of construction: 2004, Technical details: tube diameter: 20 mm bending radius max.: 100 mm control for program: S7-300 tube pipe draw up length: 2270 mm air pressure - required: 7 bar total power requirement: 15 kW Bending speed: 540 °/sec control voltage: 24 V / DC V connection voltage: 400V / 50Hz / 3 Ph V dimensions L x W x H: Biegeaggregat: 1,8 x 1,4 x 1,6 m dimensions L x W x H: Zuführung: 1,2 x 1,5 x 1,55 m dimension machine xH: 3,0 x 1,0 x 1,2 m Mandrel tube bending machine Bending direction RIGHT Operation via SIMANTIC Panel PC control unit Pneumatics: Pressure 7 bar; flow rate 200 l/min. Hydraulics: Pressure 150 bar; flow rate 6.8 l/min. Equipment/Accessories: -oil drip tray 3.1 x 0.96 x 0.02m -Spare parts and accessories Isdpfx Akeu Ibzkjpetn *

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, year of last overhaul: 2024, Well-maintained drilling machine for sale due to expansion; it was also overhauled in 2024 and has been in our inventory since 2024. Itjdpfxjzhby Ss Akpjn

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 Isdsz R Dt Eopfx Akpjtn - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Csepel RF50/1250 Radial Drilling Machine Robust and reliable radial drilling machine from the reputable manufacturer “Csepel”, model RF50/1250. This machine is characterized by its solid construction and is ideal for workshops, metalworking shops, or demanding DIY enthusiasts. Technical specifications (according to the nameplate): Manufacturer: Csepel (Budapest) Type: RF50 / 1250 Power supply: 3~ (three-phase / 380 V) Frequency: 50 Hz Control voltage: 220 V Iodpfxezninws Akpjtn Operating current: 10 A Required fuse rating: 16 A, slow-blow You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Drilling capacity in cast iron: Ø 75 mm Spindle mount: MK 5 Overhang: 1250 mm Ijdpetwzk Defx Akpetn Spindle stroke: 400 mm Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Accessories / Special features: • Square table L x W x H 650 x 500 x 500 mm • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Itsdpfxsz Rwpye Akpjn Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Drill unit feed, Tapping function - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iodpfjzwc Sbox Akpstn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Alzmetall AC 32 Turret Double-Head Drilling Machine An extremely robust and rare double-head drilling machine based on two Alzmetall AC 32 drilling head units. This machine is a high-quality industrial design intended for highly efficient series or multi-stage machining. Instead of simple spindles, this machine is equipped with two separate tool turrets. This enables fully automatic machining cycles (e.g., centering, drilling, countersinking, threading) without the need for manual tool changes. Itedpfxjznic Us Akpen Technical data & equipment (per head / overall machine): Manufacturer of drilling head units: Alzmetall (Germany) Model: AC 32 (Electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Threading capacity: max. M 24 / M 30 Tool changer: 2 x pivoting turrets with multiple stations Machine table: Solid, ground cast iron table with T-slots for flexible setup Safety: Complete enclosure of the working area (protective cabin) with viewing windows for optimal chip and splash protection Additional functions: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy vertical adjustment of the entire beam More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, total width: 500 mm, total length: 700 mm, total height: 1,800 mm, Year of manufacture: 1997 Empty weight: 200 kg - Year: 1997 - Power [kW]: 1.1 - Table length [mm]: 290 - Table width [mm]: 290 - Drilling depth [mm]: 80 - Drilling capacity [mm]: 20 - Reach [mm]: 225 - Min. spindle speed [rpm]: 210 - Max. spindle speed [rpm]: 2580 - Transport dimensions: 700mm x 500mm x 1800mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iedpfszry Ntex Akpetn Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 800 mm, total length: 1,250 mm, total height: 1,600 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Serial number: 132832 - Drive system: Conventional - Power [kW]: 0.55 - Table length [mm]: 290 - Table width [mm]: 225 - Min. spindle speed [rpm]: 320 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Itedpfezry H Sox Akpon Lukas van Rossum

Condition: refurbished (used), machine/vehicle number: MT361, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, drilling depth: 120 mm, height adjustment type: mechanical, rotational speed (max.): 3,600 rpm, rotational speed (min.): 40 rpm, total width: 540 mm, total length: 1,155 mm, total height: 2,060 mm, table width: 470 mm, table length: 510 mm, overall weight: 400 kg, year of last overhaul: 2024, travel distance Z-axis: 300 mm, distance table to spindle center: 455 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 40 rpm, Equipment: CE marking, For sale: Aciera 22K1 bench drill with VA head Art. MT361 Features: - Drilling capacity in steel, 60 daN/mm²: 22 mm - Tapping capacity in steel, 60 daN/mm²: M18 - Spindle stroke: 120 mm Isdpfx Aez R A Uhjkpjtn - Spindle diameter: 65 mm - Drilling head stroke: 300 mm - Three-phase motor: 700/1400 rpm - Motor power: 0.74/1.1 kW - CCEA Trackalpha LED lighting mounted on 2 supports - Spindle speed with gearbox: 40-560 rpm - Spindle speed with direct drive: 275-3600 rpm - 6 automatic feeds: For n=40-560 rpm: 0.12-0.25-0.6 mm/rev For n=275-3600 rpm: 0.02-0.04-0.1 mm/rev Machine completely overhauled with new electrical components, spindle nose protection, and CE conformity certificate. Machine price: CHF 15,000,- (excluding VAT)