Used Tos Gearwheel Shaping Machine for sale (65,909)

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Technical Data Diameter: 1250 mm Module: 12 mm Face width: 210 mm Nledpfx Aoyw Hxnoqwof Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts.

Condition: ready for operation (used), functionality: fully functional, Gear hobbing machine: Largest gear module: 8 mm Largest gear diameter: 500 mm Largest rim width: 100 mm Spindle stroke: 150 mm Largest spindle stroke: 125 mm Diameter of the product spindle flange or worktable: 560 mm Base hole in the table or product spindle flange: 110 mm Number of double strokes: 18 Range of double stroke changes: 55-560/min Peripheral feed rate range: 6-590 mm/min Radial feed rate range: 0.02–0.2 mm/s Nodpfxozhwa Uj Aqwjlf Distance between the lower plane, floor, and table work surface: 920 mm Largest distance between the table surface and the tool spindle surface: 270 mm Smallest distance between the table surface and the tool spindle surface: 120 mm Largest distance between the table axis and the tool axis: 355 mm Smallest distance between the table axis and the tool axis: 0 mm Limb and vernier value for setting the product and tool distance: 0.01 mm Automatic table retraction Table movement relative to the tool axis: 355 mm Rapid table movement speed: 1.5 m/min High-speed table rotation: 4.5 rpm Drilling depth: 25 mm Tool offset at idle speed: 0.5 mm Amount of static comparison for tool offset at an angle: ± 20 mm Number of motors: 6 Main drive motor power: 4/4.5/7.5 kW Hydraulic drive motor: 2.2 kW Table rotation acceleration motor power: 0.75 kW Coolant pump motor power: 0.6 kW Lubrication pump motor power: 0.25 kW Power supply for the peripheral motor: 2.4 kW Dimensions (L x W x H): 1975 x 1690 x 2510 mm Power supply: 3x 380 V; 50 Hz Machine weight: 7500 kg

Condition: used, Year of construction: 1985, machine/vehicle number: 0440298, Wheel diameter: 500 Minimum wheel diameter: 50 Maximum external ring diameter of the machined wheel with internal gearing: 800 Maximum distance from ram axis to table axis: 355 Minimum distance from ram axis to table axis: 0 Maximum number of teeth on machined wheel: 300 Minimum number of teeth on machined wheel: 12 Smallest module: 1.5 Nedjywh N Iepfx Aqwslf Largest module: 8 Table diameter: 500 Table bore: 120 Bore depth: 650 Year of manufacture: 1985 Weight: 5,200 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 13230, wheel width: 25 mm, wheel diameter: 130 mm, controller model: Siemens 840D, spindle diameter: 85 mm, stroke rate (max.): 2,500 1/min, TECHNICAL DETAILS Wheel diameter max.: 130 mm Wheel width: 25 mm Module max.: 3 Module min.: 0.5 Ram spindle diameter: 85 mm Stroke rate: 500 - 2,500 strokes/min (continuously adjustable) Stroke: 30 mm MACHINE DETAILS Control model: Siemens 840D Total power requirement: 48 kVA Dimensions & Weight Space requirement (L x W x H): 4,700 x 3,000 x 3,300 m Machine weight approx.: 11.5 t EQUIPMENT Tailstock with point Nlodpjzb Dtcofx Aqwof Chip conveyor Hydraulically actuated tailstock arm and linear guides

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 0440298, table bore: 120 mm, table diameter: 500 mm, overall weight: 5,200 kg, gear diameter: 500 mm, TECHNICAL DETAILS Wheel diameter: 500 mm Minimum wheel diameter: 50 mm Maximum external ring diameter of processed gear with internal gearing: 800 mm Maximum distance from shaping axis to table axis: 355 mm Minimum distance from shaping axis to table axis: 0 mm Maximum number of teeth of processed gear: 300 Minimum number of teeth of processed gear: 12 Smallest module: 1.5 Largest module: 8 Table diameter: 500 mm Table bore: 120 mm Bore depth: 650 mm MACHINE DETAILS Nsdpfx Ajyx U T Ajqwolf Weight: 5,200 kg

Condition: good (used), Gear hobbing machine using the Fellow system, brand Alfred Herbert, max diameter 180 mm, max module 4, in good condition. Nljdpfx Aey Swmfsqwef

Condition: good (used), Year of construction: 1973, FELLOWS 70-15 GEAR SHAPER - Model 70-15 Fellows heavy duty vertical gear shaping machine , suitable for the manufacture of external straight spur gears up to 70" pitch diameter, as well as internal spur gears and splines within a range of 0" to 88" pitch diameter, regardless of shaper-cutter radius. This unique feature, combined with the machines 15" face-width capacity and 1.7DP cutting capability in steel, provide a formidable platform for producing a wide range of larger geared part members. Equipped with: * Machine Main Base With Work-table, Upper Column, Cutter Ram and Slide of "Super Robust" Construction * Machine with "Saddle Backoff" Method of Cutter Relieving * Cutter Spindle 6.25" diameter w/Standard Straight Spur Guide * Cutter Positioning via Stroke Jog-Button * Rapid Rotation of Work Spindle for Trueing Work-Piece * Rapid Saddle Traverse for Traversing Saddle Relative to Work * Automatic Depth Feed Mechanism for One to Four Cuts, With 4 Speed Motor Providing Speed Change on Finishing Cut * Assorted Work and Feed Change Gears Nlsdpsrtrxisfx Aqwjf * Assorted Stroke Change Gears * 2" Riser Plate * Main Drive Motor 15HP, 650/220 rpm, 240 Volt 60Hz w/Westinghouse Rectifier Unit for AC * Power Forced Lubrication to Working Elements with "Lubriquip Lub Controller" * Coolant Tank, Pump, and Piping, With Chip Pan * Full Complement of Electrics * Assorted Guards, Covers * 84" T-Slotted Table * Hydraulic System * Work Lamp * Work Platform * Cutter Adaptor * Manuals Specifications: Max. Diameter External Gear Cut (Nominal): 70" Max. Diameter Internal Gear Cut (Nominal): 88" Max. Diameter Workpiece Accommodated: 104" Worktable Diameter: 84" Max. Permissible Weight of Workpiece & Fixture: 36,000 Lbs. Max. Distance Workspindle Centerline to Centerline of Cutter Spindle: 35" Min. Distance Workspindle Centerline to Centerline of Cutter Spindle: 0" Max. Work & Fixture Clearance Height w/Cutter Spindle in Upper Position: 28" Max. Diametral Pitch (full length teeth): 2 DP Max. Diametral Pitch (stub teeth): .75 DP Max. Diameter Pitch (30P.A. splines): 2-5/5 DP Diameter of Cutter Spindle: 6.25" Max. Stroke Length: 19.118" Max. Face-Width (nominal): 15" Stroking Speeds (infinitely variable): 5 to 122 S.P.M. Max. Infeed of Cutter Ram: .0020 inch/min. Min. Infeed of Cutter Ram: .0005 inch/min. Max. Rotary Feed Per Stroke (per 1" of cutter diameter): .0068"/Min. Min. Rotary Feed Per Stroke (per 1" of cutter diameter): .0006"/Min. Approximate Machine Dimensions: 192"L x 144"W x 150"H Approximate Machine Weight: 95,000 Lbs.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: Nsdpfx Aqsrtrvyowslf -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, Year of construction: 1979, max. wheel diameter 420 mm gear width 120 mm max. module 7 mm min. module 0,5 gear hobbing diameter - external 420 mm gear hobbing diameter - internal 370 mm table diameter 400 mm Nlsdpfx Aszv Ulqjqwef boring diameter 125 mm spindle stroke 120 mm stroke position adjustment 230 mm strokes - infinitely variable 30 / 800 Hub/min depth feed stepless 0,016 - 0,063 mm/Hub total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,46 x 3,48 x 2,66 m Accessories: - Various replacement wheels and blade holders - Documentation

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm Nlodpsxz Avbjfx Aqwsf boring diameter: 65,532 mm weight of the machine ca.: 11 t table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required. *

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 130 mm gear width: 25 mm module max. : 3 module min. : 0,5 control: Siemens 840D work-spindle diameter: 85 mm strokes - infinitely variable: 500 - 2500 Hub/min stroke: 30 mm total power requirement: 48 kVA weight of the machine ca.: 11,5 t space requirements approx. LxWxH: 4,7 x 3,0 x 3,3 m Nlsdpfxsvi Nino Aqwef Equipment: -Counterholder with tip -chip conveyor -hydraulically operated counterholder arm and linear guides i.D. *

Condition: good (used), Year of construction: 1965, max. wheel diameter 900 mm max. module 6,5 stroke up to 150 mm table diameter 900 mm table hole 360 mm weight 3,7 t External: max. diameter 900 mm Max. gear width 150 mm Internal: Max. diameter 630 mm Max. gear width 150 mm Spindle bore table 360 mm Table diameter Ø 900 mm Module 6.5 mm Length 2500 mm Width 2300 mm Height 2600 mm Weight 4100 kg Nodpfsywnt Tox Aqwslf

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm y-travel 560 mm gear width 180 mm max. module 8 min. module 1 workpiece dia. 750 mm table diameter 450 mm draw-in arbor diameter 58 mm spindle stroke 200 mm adjustment range 230 mm distance between table/spindle 225-450 mm taper Morse 4 down feeds 0,03 mm/Hub Nodpfeyb Sx Tox Aqwelf roll feed 10n: 0,18-0,74 mm/Hub no. of strokes 12n: 47-300 Hub/min electrics - voltage/frequency 380/50 V/Hz weight of the machine ca. 5500 kg The machine was raised by 100 mm.

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 Nlodpfx Aqsu Uu S Tjwof table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Year of construction: Approx. 1970

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V Nlsdpovu E Nuefx Aqwof frequency 50 Hz Max. Line power 70 A total power requirement 48 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m table hole 40 mm taper in main spindle SK 45 control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Maximum gear diameter: 330 mm Maximum module: 6 Wheel width: 180 mm Minimum module: 0.5 Njdpfxezh H R Nj Aqwelf Machine weight: 5500 kg Available accessories can be seen in the photo.

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 Nljdpfx Aozq Hmceqwof min. module 0,5 Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: used, Year of construction: 1963, total height: 1,850 mm, total width: 800 mm, total length: 3,900 mm, Empty weight: 3.000 kg Price: On request Stroke: 1500mm Capacity: 10t - Year: 1963 - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.5 - Transport dimensions: 3900mm x 800mm x 1850mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Nlodpey Auy Refx Aqwjf VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible. Nlsdpfx Asx Uq Tweqwef

Condition: ready for operation (used), Year of construction: 2011, A modified MECO internal keyway slotting machine is available. Keyway width range: 4mm-45mm, max. square keyway diameter: 36mm, max. hexagonal keyway diameter: 36mm. The machine was modified and can now slot square and hexagonal keyways. Documentation available. An on-site inspection is possible. Njdpfx Aey Hvqroqwjlf

Condition: excellent (used), Year of construction: 2013, Weinig Powermat 600 automatic profiling machine, net price €68,800. Technical data: Year of manufacture: 2013 Working width (with a cutting circle of 93 - 125 mm): 20 - 230 mm Working height (with a cutting circle of 93 - 125 mm): 10 - 120 mm 7 spindles First lower horizontal spindle: 5.5 kW (7.5 HP) motor First right vertical spindle: Shared motor with the left vertical spindle: 11 kW (15 HP) First left vertical spindle: Shared motor with the 1st right vertical spindle Second right vertical spindle: 5.5 kW (7.5 HP) motor First upper horizontal spindle: 7.5 kW (10 HP) motor Second upper horizontal spindle: 7.5 kW (10 HP) motor Second lower horizontal spindle: 5.5 kW (7.5 HP) motor Electronic feed with brake, steplessly adjustable: 5 - 30 m/min Motor: 4 kW (5.5 HP) Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors are IE2 rated. All spindles with high rotational accuracy. Standard equipment for PowerLock. Planing table length: 2 m (including a longitudinal guide) Marathon Coating for the machine table and guides Special coating for protecting the table segments and guides against excessive wear. Recommended for machining abrasive materials (e.g., tropical wood, MDF, chipboard). OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 mm Tool diameter max. 300 mm Tool length: 0 - 240 mm Radial measuring range (radius): 150 mm Non-contact measurement of tool dimensions, radius (R), and height (H), with display on electronic digital displays. Electronic digital displays indicating tool radius and height. HSK63 tool holder for PowerLock tools Nodpfx Aqoytd S Nowelf NEW: PowerLock HSK63 adapter, shank D=50 x 260 mm 2. ROUTER HEADS WITH POWERLOCK MOUNTING, price €7,500 Two cabinets full of router heads for various applications, approximately 45 pieces.

Condition: used, Year of construction: 1999, functionality: fully functional, spindle diameter: 40 mm, total width: 1,800 mm, total height: 1,890 mm, total length: 4,200 mm, overall weight: 3,200 kg, spindle speed (max.): 6,000 rpm, type of input current: three-phase, input voltage: 400 V, number of spindles: 6, Weinig Profimat 23E four-sided planer Working width: 230mm Working height: 120mm Number of spindles: 6 Bottom: 7.5kW Right: 7.5kW Left Top: 7.5kW Bottom: 11kW Universal: 5.5kW Spindle diameter: 40mm Working speed: 24m/min Pneumatic pressure pads for feed rollers Electric adjustment of the pressure bar Nlodpfxszvgbwo Aqwef Length of the infeed table: 1970mm Table lubrication system Year of manufacture: 1999 Machine dimensions: 420x180x189cmH Machine weight: 3200kg

Condition: excellent (used), functionality: fully functional, Weinig Hydromat 23 profiling line Kallfass KFP-4000-4 destacker Package length 2500mm Nledpfx Aqezvaw Sswjf Feeding to the profiling machine conveyor Receiver for spacers Weinig Hydromat 23 four-sided planer Number of spindles: 9 Hydraulic feed drive: 60m/min Material conveyor to Weinig EM12 planer Weinig UNISTACK 811 stacking machine Package length: 500 mm to 3100 mm Package height: 1200mm Package width: 1200mm

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AH/109736, functionality: fully functional, input voltage: 400 V, edge thickness (max.): 2 mm, height adjustment type: mechanical, overall weight: 250 kg, Equipment: CE marking, machine in excellent condition, used very little practical and versatile edge gluing machine for carpenters for straight edges for angled edges particularly suitable for edge banding of shaped parts Njdpfxszvmygs Aqwslf READY FOR OPERATION

Condition: excellent (used), functionality: fully functional, Weinig Powermat 1000 four-sided planer Working width: 230 mm Working height: 160 mm Number of spindles: 8 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW (power lock) Left: 5.5 kW Right: 5.5 kW (power lock) Top: 11 kW (power lock) Bottom: 15 kW Top: 7.5 kW (power lock) Bottom: 7.5 kW All spindles: 8000 rpm Feed speed adjustable via frequency inverter up to 30 m/min Electromotive positioning of working height and width Weinig power com system Njdpfx Aezt I Sfjqwolf Pneumatic material clamping 2 smooth rollers in the working table Working table length: 1970 mm Drive on cardan shafts