Used Tira K 150 B for sale (67,015)

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V Kedpfewcg Elex Aamjnc total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: used, TIRA Climate simulation chamber / walk-in climate test chamber TIRA TCZ 4022 S -2K Air-cooled | -40 to +140 °C | Refrigerant R449A For sale is a used, walk-in climate simulation chamber from the manufacturer TIRA. The system consists of an insulated test chamber, an air handling unit, external humidification, a machine unit and a control cabinet. It is used for temperature and humidity testing. Technical data: Manufacturer: TIRA Type: TCZ 4022 S -2K Cooling type: air-cooled Temperature range: -40 to +140 °C Temperature stability, supply air: over time ≤ ±0.5 °C; spatially ≤ ±1.0 °C Heating / Cooling: approx. 2 K/min each (-30 to +85 °C, without test item and thermal load) Climate range: +10 to +90 °C Humidity: 10 to approx. 95 % RH Dew point: +5 to +89 °C Humidity stability, supply air: over time ≤ ±2.5 % RH With heat compensation up to 16 kW: +15 to +80 °C; 15 to approx. 80 % RH Dew point: +10 to +74 °C Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm External dimensions: approx. 2660 x 6460 x 2800 mm Door opening (W x H): 2260 x 2260 mm Climate module KB 127: 1700 x 800 x 1400 mm Control cabinet: 800 x 500 x 2000 mm Power connection: 400 V, 3/PE/N, 50 Hz Rated power: 95 kW; Rated current: 150 A Fuse rating: 200 A, slow-blow Total weight according to specifications: approx. 5834 kg Equipment: Stainless steel interior and floor Double-wing door with viewing window approx. 1000 x 1000 mm Supply air at the top / exhaust air at the bottom on the rear wall Electric heating, direct cooling and dehumidification Bitzer 6G-30.2Y; Refrigerant R449A; Oil SEZ 32 Steam humidifier EDB 40 4 test chamber spotlights à 500 W Insulation: 80 mm PUR and 120 mm mineral wool Knjdpfx Aoz Sn Uveamsc Floor load: 15,000 N/m²; Wheel load: 1,500 N/wheel (≥ 4 cm²) Application areas: Temperature and climate testing Environmental simulation Material and component testing Quality assurance and development Condition: Used Optical condition according to pictures Scope of delivery: TIRA TCZ 4022 S -2K with associated components as shown in the pictures Items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Ksdpsyzc Ruofx Aamsnc

Condition: good (used), Duplo DSC-10/20 + DBM-150 + DBM-150T Booklet Making Line Kjdpezw T Dhefx Aamsnc This machine is in very good condition and is the latest booklet making system from Duplo. Made in Japan, 2018. Controlled via a control panel. The line consists of: – DSC-10/20 collator – vacuum feeding – LUL-HM manual feeder connector – DBM-150 stitching and folding unit – stitching and folding in one unit – DBM-150T front trimmer – Long outfeed table – Built-in stacker for stacking sheets. The machine includes documentation, small parts, etc.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Knjdpfxex T Azwe Aamsc Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12-month warranty, immediately available, in stock. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers; not available individually due to shared control system! -Drawers extend on telescopic rails -Drawers are locked individually with quick-release fasteners -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow is horizontal -Air circulation via radial fan -Temperature controller Eurotherm 3508 -Thyristor switch -Safety limiter JUMO -Heating capacity per oven: 17.4 kW -Documentation, CE declaration of conformity Inspection in our warehouse possible upon request! Kode Aa Aivepfx Aamenc Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, stress-relieving oven.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, used wet polishing machine from PERS, model Vibra-Line B 150 l, with buffer tank, in combination with PERS dryer Vibra-Dry A 200 l - both demo machines Technical data / Vibra-Line B 150 l: U-shaped work container with automatic discharge Capacity (gross): 150 l Usable volume (depending on workpiece geometry and material): 80 l Year of manufacture: 2024 Diameter, external: 1,170 mm Height: 860 mm Lining in the bowl: 22 mm, yellow or brown PU Total weight (empty): 320 kg Drive power: 2.2 kW Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) itself flows through the filter basket into the buffer tank, from which a submersible pump pumps the water back to the rotary vibrator. Dimensions of the buffer tank (L x W x H): 700 x 400 x 460 mm 1 submersible pump and 1 filter basket (630 µm) are included Technical data / Vibra-Dry A 200 l: Corn/grain dryer with automatic discharge - vibration dryer Year of manufacture: 2024 Volume: 220 l Motor power: 1.5 kW Heating: 3 kW per element (PTI temperature control) Capacity, workpieces: up to 65 kg Capacity, corn: 25-35 kg Speed: 1400 rpm Heating effect: 6 x 1.5 kW Length: 1,141 mm Width: 1,200 mm Height: 905 mm Internal dimensions of the bowl: 240 mm Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Corn granule temperature: +30 to +50 degrees Digital temperature control pneumatically controlled outlet valve For commissioning, 25 kg of corn kernels of type GM 16 or GM 20 must be used. Knedpfxoy A N U As Aamec

Condition: excellent (used), Debag Monsun Sticken Oven, Electric for 12 sheets, 60x80 cm with 2 embroidery frame carriages, overhauled 1 year ago; the oven is still in working order. Connection: 64 Ah 32 kW connection If you have any further questions, please call or send an email. Knedjdc Eigopfx Aamjc Thank you in advance.

Condition: used, TIRA Type: Walk-in climate simulation chamber TTZ 4008 S(m) Technical data: Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.0 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 8 m³ External dimensions (W x D x H): approx. 2410 mm x 3920 mm x 2530 mm Test chamber (W x D x H): approx. 2002 mm x 2148 mm x 2005 mm Door opening (W x H): approx. 2002 mm x 2005 mm Kjdjzg Twmspfx Aamsnc Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, TIRA Type: Walk-in climate simulation chamber TCZ 4020 S-2k Technical data: Temperature range: -40...+140 °C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95 % RH Kedpfxjzg Tw Te Aamjnc Humidity tolerance: +/- 5.0 % RH Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, TIRA Type: Walk-in climate simulation chamber TCZ 4012 S(m) Technical data: Temperature range: -40 to +120 °C Temperature tolerance: +/- 1.0 °C Temperature change rate: 1 K/min Humidity range: 10 to approx. 95% RH Humidity tolerance: +/- 5.0% RH Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260 mm x 3850 mm x 2780 mm Test chamber (W x D x H): approx. 2254 mm x 2645 mm x 2251 mm Knodpfjzg Tw Hjx Aamsc Door opening (W x H): approx. 2251 mm x 2254 mm Condition: used Scope of supply: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2008, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23477, workpiece weight (max.): 550 kg, total width: 1,300 mm, total length: 1,150 mm, total height: 2,800 mm, power: 12 kW (16.32 HP), input voltage: 400 V, usable tank capacity: 150 l, We offer this almost unused Rohde electric chamber furnace, model KEU 150 N SoB, manufactured in 2008. Manufacturer: Rohde Type: Electric chamber furnace KEU 150 N SoB Year of manufacture: 2008 Maximum temperature: 650 °C High-quality programmable control system Bentrop Thermocomputer TC 507 Neatly arranged control cabinet No visible signs of corrosion or thermal damage Industrial special version with extraction/air guidance Complete documentation Knsdez Ehi Ejpfx Aamjc If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: Knodpfx Aaezk Nmromec - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Knedpfx Aezc Agkjamsc Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable Knedezvz Tbepfx Aamjc The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Kedpfx Aajynpc Nemenc Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, Robust shut-off and check valves in various designs – ideal for industrial applications in water, air, and material handling technology. These high-quality valves impress with their sturdy construction, reliable sealing, and ease of use. Perfectly suited for maintenance, replacement, or expansion of existing systems. Various sizes and models available. Immediately ready for use and in good condition. Kodpfx Asy Smtnjamjnc 8x 150 DN 16 PN EBRO 2x 125 DN 16 PN EBRO 3x 150 DN 16 PN JET

Condition: ready for operation (used), Year of construction: 2007, Available immediately from our location: CNC vertical balancing machine, TIRA Type KV 10 Year of manufacture 2007 Rotor mass 1 – 10 kg Rotor height up to 400 mm Rotor diameter up to 400 mm Max. balancing speed up to 2000 rpm Max. display sensitivity (gmm) 0.5 Drive power 2.2 kW Knedpfe Aa Ikljx Aamec Weight 1500 kg Price: EUR 2,000.00 (plus VAT, ex works)

Condition: excellent (used), Year of construction: 2006, load capacity: 150 kg, arm reach: 2,700 mm, The KUKA KR 150 is a 6-axis industrial robot designed for high-precision and high-speed applications. With a 150 kg payload capacity and a wide working envelope, it delivers reliable performance in tasks such as welding, assembly, handling, and machining. Model: KR150-2 2000 Condition: Used Year: 2006 Included: Manipulator + KRC2 + KCP2 Teachpendant + All Wire Sets Ksdpjw Nat Iofx Aamenc Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: Kuka's Website)

Condition: used, Year of construction: 1984, Consists of a cooking cabinet and smoking unit, including documentation. On-site inspection is possible. Knodpszvgh Defx Aamsc

Condition: used, Year of construction: 2012, The machine is designed for the production of: • Stand-up pouches (Doypack / SUP) with bottom gusset • Three-side seal pouches (3SS) • Flat pouches • Bottom-gusseted pouches with shaped bottom contours Technical Data: • Machine length: 16,900 mm • Machine width: 5,500 mm • Machine passage width: 800 mm • Operating voltage: 400 V, 50 Hz, 3-phase • Control voltage: 24 V DC • Power rating: 125 kW • Current: 235 A • Maximum web feed speed: 3.0 m/s • Maximum output: 150 cycles/min • Maximum output with stacking system: 130 cycles/min • Main operating side: left-hand side in the direction of web travel Production Capabilities • Three-side-sealed pouches • Stand-up pouches • Pouch width: 90–340 mm • Pouch length: min. 80 mm; max. 375 mm (two lanes), max. 750 mm (single lane) • Bottom gusset depth: 20–75 mm • Processable materials: PET/PE, PA/PE, PET/ALU/PE • Film thickness: 80–250 µm Equipment • Shaftless unwind stand with web edge control • Height-adjustable unwinding position • Unwind stand for 152 mm cores • Maximum clamping width: 1,600 mm • Maximum roll diameter: 1,200 mm • Bottom-gusset strip unwind stand with web edge control • Bottom-gusset strip unwind stand for 76 mm cores • Maximum clamping width for bottom-gusset strips: 450 mm • Maximum roll diameter for bottom-gusset strips: 1,000 mm • Dancer system for roll changes during machine operation • Fine-dust extraction for bottom-gusset strips • Hot embossing station • Sealing presses with cooling, complete sealing process • Bottom-contour punching unit and bottom opener • Punching-knife holder for 310 mm wide knives • Bottom pre-opening unit with additional embossing function • Longitudinal edge trimming with additional punching unit • Six knife holders with trimming blades replaceable during production • Suction conveyor with three waste-removal rollers for punched corners • Pouch stacking unit with lateral discharge conveyor • Reject diverter into a mesh container • Swivelling packing table • Carton sealer and roller conveyor • Matho central extraction system for punching waste • Extraction of bottom-hole, corner and bottom punching waste • Edge-trim extraction with shredding function Kodpjz Szcysfx Aamenc • Waste collection in a Big Bag

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, input frequency: 50 Hz, input voltage: 400 V, empty load weight: 50 kg, Tool tempering heating: 9 kW. Temperature: 150°C. Knsdpfezab A Eox Aamec

Condition: used, functionality: unexamined, Wostor Euromarker basic 150 Knedow U Ir Nepfx Aamec - Screw handle broken and slightly bent - Shipping possible at extra cost

Condition: good (used), Year of construction: 2001, Manufacturer: Safan Type: CNCL-K 150-3100 TS1 Year of manufacture: 2001 Condition: fully functional, without defects, can be tested on site. Technical data: Max. bending force: 150 tons Max. bending length: 3100 mm Max. working pressure: 300 bar Machine axes: Y1, Y2, X, R, Z1, Z2 + rotary bending Ksdpfx Aozcb R Ieamonc Machine weight: 10,500 kg

Condition: used, spindle diameter 150 mm x-travel 2500 mm y-travel 1600 mm z-travel 1000 mm spindle taper ISO 50 turning speeds 4-1120 U/min Feed 5-2000 mm/min bore spindle stroke 580 mm main drive motor 45 kW table surface area 1600x2000 mm table load 12,5 t Control Heidenhain type TNC 410 workpiece weight 15000 kg Kjdpfeyquh Asx Aamonc total power requirement 80 kW dimensions of the machine ca. 6,5x5x5x4 m Machine overhauled 2004 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team