Used Tesar Italy 400Kva 15Kv/0,4Kv for sale (1,506)

Condition: new, Year of construction: 2023, 1 pc cast resin, epoxy dry distribution 3 phase transformer manufactured by TESAR Italy, 400kVA, 15000 ( ± 2 x 2,5 %) /400V; Dyn11, IP00, year of production 2018 ( connected / not energized ), ecodesign tier 1, project documentation and rutine protocol, manuals. Hnedpfx Absyhxlkjkeu

Condition: used, Year of construction: 2008, cast epoxy resin, dry distribution 3 phase transformer - manufactured by TESAR Italy, 2000kVA, 15000 ( ± 2 x 2,5 %) /400V; Dyn5 ( possible to change to Dyn11 or Dyn1 ), IP00, year of production 2008, IEC losses, thermal protection device, project documentation and rutine test protocol, fully functional, manuals, total 3 pcs. Hnodpfxeykb Ngo Abkou

Condition: used, Year of construction: 2011, Dry (epoxy casted ) three-phase distribution transformer - manufacturer ABB Zaragoza Spain, 800kVA, 35/0.4kV, IP00, uk=6%, Dyn1, TESAR ITALY 1000kVA 35/0,4kV Dyn1, Al winding, standard losses, documentation available, fully functional. Hedpfx Aswiqczsbkjnu

Condition: new, Year of construction: 2026, New cast resin, epoxy dry distribution 3 phase transformers manufactured by TESAR Italy, 630kVA; 1600kVA; 2000kVA, 20000 ( ± 2 x 2,5 %) /400V; Dyn1/5/11 ( adjustable), IP00, ecodesign, design documentation and rutine test protocols, maintenance manuals, unpacked - never used, warranty. Hodpfxepag H Rs Abkonu

Condition: new, Year of construction: 2026, new cast epoxy resin - distribution 3 phase transformers manufactured by TESAR Italy, 3 pcs 400kVA, 2 pcs 630kVA, 2 pcs 1000kVA, 1 pc 1250kVA, 2 pcs 2000, 1 pc 2500kVA 22000 ( ± 2 x 2,5 %) /400V; Dyn1/5/11 ( adjustable), IP00, losses Ecodesign tier2, project design documentation and rutine protocols, manuals, unpacked, 2 years warranty, available asap from our stock. Hjdpfx Aohybc Nsbkonu

Condition: used, Year of construction: 2001, Cast resin epoxy distribution transformer 630kVA manufactured by TESAR Italy, voltage ratio 10000 ( ± 2 x 2,5 %) /400V, Dyn5 or Dyn11 or Dyn1, IP23 or IP00, forced cooling AF, conductor Al/Al, temperature monitoring unit, functional, available 1 pc. Hnsdpfx Abequwtxekeu

Condition: used, Year of construction: 2004, Cast epoxy resin - dry - 3 phase distribution transformer, manufacturer TESAR Italy, year of manufacture 2004, power 1600kVA, voltage ratio 20(2x±2.5%)/0.4kV, AN-AF (forced ventilation, permanent overload 30%), Dyn11, uk=6%, IP00, standard losses, functional, complete documentation and rutine test report. Hjdpfswpb Emox Abkenu

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, outer diameter: 1,600 mm, total height: 1,600 mm, total length: 1,400 mm, total width: 800 mm, inner diameter: 470 mm, input voltage: 400 V, overall weight: 850 kg, Equipment: documentation/manual, Year of manufacture: 2009 Load capacity: 1500 kg Coil inner diameter: 470 - 630 mm Coil outer diameter: 1600 mm Speed: 12 revolutions/min Frequency inverter Dimensions: approx. 1.7 x 1.4 x 1.7 m Weight: 850 kg Hnjdpfxez Riz Ie Abksu Original documentation included, ready for immediate use.

Year of construction: 2010, condition: like new (used), functionality: unexamined, machine/vehicle number: TUBE-MATIC-1200-CNC-3376, Equipment: 3rd hydraulic function, Unused SAFOP,ITALY Make Heavy Duty Bevelling Machine Upto 1200 MM ,CNC,Siemens Control,available for Sale IN Southern PArt Of INDIA fore an very Attractive Price. Hsdpfx Aszrkwnsbkenu

Condition: excellent (used), Year of construction: 2007, Cast resin, epoxy resin dry distribution 3 phase transformer manufactured by TMC Italy, 400kVA, 22000 ( ± 2 x 2,5 %) / 400V; Dyn1, IP00, year of production 2007, losses IEC, PTC probes, functional. Hedpfx Asx Nxwaobkjnu

Condition: new, Year of construction: 2023, Never used dry epoxy casted rectifier transformer - manufacturer TESAR Italy, power 1600kVA 21(2x±2,5%)/2x0,570kV, Dd0yn11, IP00, standard losses according to IEC standard, Al-Al winding, electrostatic screen, THDi=25%, complete design documentation and test report, available 1 pc on stock, year of manufacture 2023. Hedpfoy Ah Nrsx Abkonu

Condition: new, Year of construction: 2017, Dry epoxy casted traction rectifier transformer - manufacturer TESAR Italy, power 2800kVA 20(2x±2,5%)/2x0.586kV, Dd0yn11, IP00, load level VI (IEC 60146), 100%-2800kVA-continuous, 150%-4200kVA-2 hours, 300%-8400kVA-60s, standard losses according to IEC standard, Al-Al winding, electrostatic screen, dimensions 2.45x1.4x2.7m (lxwxh), weight 8000kg, never used, complete documentation and test report, available 6 pcs on stock, year of manufacture 2017, suitable for battery storage systems BESS, can be installed outdoors in case of IP33 protection. Price negotiable. Hnedpfx Ajxlybcsbkju

Condition: used, Year of construction: 2012, functionality: fully functional, SCS AUTOMABERG “Corner Master” – Machine for Rounding the Corners of Hardcover Covers/Boxes Purpose: High-speed machine for rounding the corners of hardcover covers/boxes coming from a cover-making machine. Automatic in-line feeding; four diagonally moving tools form the rounded corners. Manufacturer: SCS Automaberg, Brusaporto (BG), Italy Machine type: Corner Master Year of manufacture: 2012 • Format: min. 143 × 94 mm — max. 720 × 420 mm (W × H) • Rounding tools: R8, R10, R12 mm • Conveyor belt speed: 60 m/min Hjdpez A A Htsfx Abkenu • Maximum operating speed: 3,600 cycles/hour • Motor power: 2 kW • Power supply: 400 V / 3-phase / 50 Hz • Air consumption: approx. 900 l/min at 6 bar • Dimensions: L 2,590 × W 1,190 × H 1,890 mm • Weight: 800 kg • Note: Recommended board weight up to max. 1,000 g/m²; no material preparation required Price: €19,500.00

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,675 mm, travel distance Z-axis: 1,080 mm, number of slots in tool magazine: 4, total height: 2,354 mm, total length: 3,800 mm, total width: 3,050 mm, Equipment: CE marking, PADE TARGET – 5-Axis CNC Machining Centre with Additional C Rotary Axis Manufacturer: PADE, Italy Model: TARGET Year of manufacture: 2006 Condition: Used, fully operational Availability: Available for delivery November–December 2026 Technical specifications • 5 simultaneous CNC machining axes + additional controlled C rotary axis • Axes: X / Y / Z / A / B + C • C-axis rotary table usable during machining • X-axis travel: 1,600 mm • Y-axis travel: 1,675 mm • Z-axis travel: 1,080 mm • A-axis rotation: 360° • B-axis rotation: ±90° • Maximum working area: 1,600 × 1,100 mm • Machining head with 4 independent electro-spindles • Electro-spindles with ceramic bearings • Revolving machining head for rapid spindle/tool selection • Adjustable workpiece supports and clamping system • Suitable for routing, profiling, drilling, boring, mortising and tenoning • Particularly suitable for complex and curved solid-wood components, including chair, table and furniture parts Control system • Original WINMEDIA 93000635J industrial PC has been replaced by a standard PC • Machine is fully operational in its current configuration • Available for demonstration in operation prior to dismantling Machine description The PADE TARGET is a versatile CNC machining centre designed for complex machining of solid-wood components, particularly chair, table and other shaped furniture parts. The machine combines simultaneous 5-axis machining with an additional controlled C rotary axis, which can also be used during the machining process. Together with four independent electro-spindles, this configuration provides high flexibility for machining complex three-dimensional components from multiple orientations. The machine is in fully operational condition and is currently installed and in use. The original WINMEDIA 93000635J industrial PC has been replaced by a standard PC, and the machine operates normally in its present configuration. The machine can be inspected and demonstrated under in our production plant in Laktasi, Bosnia and Herzegovina. Hnodpozx S Afsfx Abkou Available for delivery: November–December 2026.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Hedpfxsyniz Ee Abkonu Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Condition: excellent (used), Year of construction: 1996, S.R.A RC 2000 ITALY Hodezladdspfx Abkonu YEAR 1996 MAX working WIDTH 2000 mm

Condition: excellent (used), Year of construction: 1996, MACHINE FOR PRODUCTION OF BLOCK BAGS Hnsdpfx Aezlahpobkou Brand: MAC (ITALY) Description: machine for producing BLOCK bags with automatic break, year 1996, servo motors, automatic change of length, unwinding rolls with automatic brake 170 mm, longitudinal var with automatic thermoregulation, prefaltac for four runways (runway photocells each separately), head of brewing 120 mm station to handle and automatic stacking Bag with automatic clip, capacity 160-200 beats per minute x 4 lines Machine is in very good condition!

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and sealing machine - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Hot-air system for tube sealing - Temperature control for hot air - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding Hnsdpfxozyu R Uo Abkou - Emergency stop and safety controls - Various format and spare parts available - Documentation available ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION Suitable for filling and sealing plastic tubes. The machine is particularly well-suited for creams, gels, ointments, pastes, and other liquid to viscous products, depending on the product and the installed dosing configuration. CONDITION Used machine in good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. The exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available upon request. Price: EUR 22,500 net negotiable, EXW Switzerland

Condition: good (used), Code: 0496 Brand: POR - ITALY Model: CASTORO - CE Standard Shredder for wood waste, wood industry, carpentry shops, furniture manufacturers, paper industry, footwear industry, plastics industry, and other sectors - CE Standard Technical data: Automatic hydraulic release pusher Motor Hp 10 + 2 Hourly output approx. 100–150 kg Inlet opening 870 x 425 mm Hnodpfx Aez N Ewpebkou Electrical control panel Overall dimensions mm 1550 x 950 x 1550 h Weight kg 1000

Condition: good (used), Code: 0495 Brand: BIMATIC - ITALY Model: BSC 263.10 - CE Standard Automatic edge bander for wood, pvc, veneer, and abs edges, for woodworking shops, custom furniture, furniture, panels, and doors - CE Standard Hnedpfx Ajz Iztvjbkeu Technical data: Min/max edge thickness 0,4/10 mm Min/max panel height 10/60 mm Min panel width 50 mm Min panel length 70 mm Working speed 8/12 mt/min Adjustable support side transfer for panels Composition: Gluing unit: Rapid-heating glue pot – Glue pot capacity 3 lt Roll material cutting shear Vertical end cutting unit with 2 independent motors, 0,5 Hp at 12000 rpm – Motors tiltable up to 15° Tiltable trimming unit with 2 motors, 0,75 Hp at 12000 rpm Fine finishing unit with 2 motors 0,5 Hp at 12000 rpm Edge scraping unit Overall dimensions mm 3145 x 725 x 1400 h Weight kg 810

Condition: used, functionality: fully functional, Spiral dough mixer Made in Italy. Hnjdpfx Abowr Dhpjkou Mixing capacity: 180 liters, 120 kg dough The machine includes 6 mobile bowls. Condition: used, fully functional

Year of construction: 2020, condition: ready for operation (used), overall weight: 16,500 kg, total height: 3,500 mm, pressing force: 250 t, product length (max.): 4,000 mm, stroke length: 400 mm, number of axes: 6, This hydraulic press manufactured in 2020 features a pressing force of 250 t and a working length of 3,100 mm. It is equipped with an ESA AUTOMOTION S640 touch screen CNC control and an electronic color graphical programmer. If you are looking to get high-quality pressing capabilities, consider the GILARDI Italy 3.25 machine we have for sale. Contact us for further details. Hodpfoz Sbymsx Abkjnu • Programming system: Electronic color graphical programmer • Working length: 3,100 mm • Distance between columns: 2,700 mm • Throat depth: 500 mm • Table-to-ram distance: 730 mm • Fast approach speed: 150 mm/s • Working speed: 10 mm/s • Return speed: 160 mm/s • Motor power: 18.5 kW • Maximum pressure: 280 bar • Electrical: Three-phase, 400 V, 50 Hz, 36 A

Condition: good (used), Code: 0459 Brand: SICMA - ITALY Model: F 700 N - CE Standard Hedpfozn Agtsx Abkonu Spindle moulder for milling and jointing operations on wood, plastics, composites and various other materials – CE Standard Table dimensions 1000 x 800 mm Rotational speed 3000/4500/6000/8000 rpm Max diameter 250 mm Mechanical spindle height indicator Motor 4,5 Hp Aluminium guides Safety guard N° 2 suction inlets diameter 120 mm Overall dimensions mm 1100 x 800 x 1100 h Weight kg 800

Condition: used, Technical specifications: Capacity: 3 m3 Integrated pump Shelf length: 3000 mm Shelf width: 1100 mm Hsdpezabk Asfx Abkenu Dimensions: Height: 2700 mm Width: 2500 mm Length: 4700 mm

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Hsdpezp D Eaefx Abkjnu Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500