Used Teka Wna-Al3500 for sale (84)

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Bdsdszq A Ezspfx Afmsf Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Condition: used, Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW Stationäre Absaugung mit Filteranlage / Stationary Extraction Eystem with Filtration Unit TEKA Filtercube 4H HV 11kW TEKA-Dosiereinrichtung für Precoat, Filterpatronen gegen Verkleben schützen /  TEKA Precoat Dosing Unit: Protecting Filter Cartridges Against Clogging Baujahr / Year 2018 - Serial-No. 9501442110402 Filtersteuerung mit automatische Filterabreinigung / Filter Control with Automatic Filter Cleaning Motorleistung 11 kW / Motor power 11 kW Leistungsstarker Ventilator mit Steuerung / High-Performance Fan with Controls Ausführung SelfClean / SelfClean Version Ausstattung / Equipment: Standard Filterpatronen, Filterfläche je nach Luftleistung / 4 standard filter cartridges; filter area varies depending on airflow capacity Display gesteuerte Filterabreinigung / Display-controlled filter cleaning Ventilatorsteuerung / Fan Control Bogenschalldämpfer für Luftaustritt nach oben / Elbow Silencer for Upward Air Discharge Rauche und Stäube werden mit einer Filterleistung von über 99 % sicher abgeschieden / Smoke and dust are safely separated with a filtration efficiency of over 99% Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bsdpfx Aszav Ebefmodf

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 8,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2012 The filter is cleaned by a microprocessor controller with pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, is an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, which minimizes the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary welding fume extraction unit. Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of a hall (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: *Fan in a soundproof housing with a power of 11 kW. *Capacity 8000 m3/h *Vacuum max 3000 Pa *Filtration area 100 m2 *Built-in frequency converter. *Control cabinet with electrical documentation *Includes a TEKA FVS7000-12000 water-based spark trap. *New filter cartridges Bdedpfozp H Nbex Afmof Warehouse number: 1154

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter TEKA. Model: TK-PF Mobile filtration and ventilation unit. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. Fan power: 1.1 kW – three-phase Max. capacity – 3500 m3/h Max. negative pressure – 3000 Pa 2 extraction arms, each 4.00 m long. Stock no. – 1106 Bjdpfx Afey Hq Rtsmjdf

Condition: used, type of input current: three-phase, filter area: 40 m², suction capacity: 4,000 m³/h, negative pressure: 2,500 Pa, Welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type by TEKA. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter elements. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. Fan power: 4 kW Capacity: 4000 m3/h Vacuum: 2500 Pa Filtration surface: 40 m2 Inlet diameter: 315 mm Device dimensions: Height - 2.50 m Width - 1.25 m Depth - 0.97 m Bedpfsy Hhd Dex Afmodf Stock no. - 1116

Condition: good (used), Year of construction: 2014, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, small dust collectors -Manufacturer: TEKA, mobile welding fume extraction system type Strongmaster IFA -Drive: 1.1 kW -Volume flow rate: 3000 m³/h -Extraction arm: Ø 160 mm x 4000 mm Bdodpfx Afjzblywjmef -Transport dimensions: 950/670/H1365 mm -Weight: 196 kg

Condition: ready for operation (used), Specifications: Supply voltage | V | 230 Frequency | Hz | 50 Run Hours: 2690 hours Type of current | Ph | 1. Engine power | kW | 2.4 Air flow volume max. | m³/h | 640 Negative pressure max. | Pa | 15000 Protection class | | IP54 Bjdpjxvpumefx Afmsdf ISO class | | F Extraction performance | % | >99 Width | mm | 365 Depth | mm | 768 Height | mm | 801 Weight | kg | 70 Sound pressure level | dB(A) | 70 Allowed ambient temperature | °C | +5 to +35 (during operations) | | -10 to +40 (during transport and storage) Max. temperature of polluted air at the capture point | °C | +50 Allowed max. humidity | % | 70 Good working condition. Please check out our other listings as well.

Condition: used, Industrial High-Vacuum Extraction Fan / Dust Collector, TEKA TK-LMD 508, Used machine Manufacturer: TEKA Absaug- und Entsorgungstechnologien GmbH (Velen, Germany) – Premium extraction and environmental technology manufacturer Bodezg Uw Uopfx Afmedf Type: TK-LMD 508 Serial number (Masch.-Nr.): 00113963 Year of manufacture (Bauj.): 1999 Reference number (AB): 8798 Protection class (Schutzart): IP 54 (Protected against dust and splashing water) Overall dimensions: 370 x 380 x 740 mm Volume flow rate (Volumenstrom): 320 m³/h Max. static pressure (max. stat. Pressung): 21,000 Pa (Extreme suction power even through thin hoses) Motor power (Motorleistung): 1.2 kW Rated current (Nennstrom): 5.2 A Supply voltage (Anschlussspannung): 230 V Control voltage (Steuerspannung): 230 V Frequency (Frequenz): 50 Hz Type of current (Stromart): 1Ph+N+PE (Single-phase design, operates from a standard wall outlet) Suitable Application Areas: This unit is a specialized, high-vacuum extraction fan designed for extreme suction pressure rather than high air volume. It is perfectly suited for the following fields: Welding fume extraction: Direct torch-integrated (next to the nozzle) point-source extraction in welding shops. Laser engraving and cutting: Extraction of fine, toxic smoke and gases generated during laser cutting or marking processes. Electronics manufacturing: Point-source extraction of soldering fumes across multiple workbenches or automated soldering lines. Dental and medical laboratories: Precision extraction of fine dust, grinding, and drilling debris. Printing and fine mechanics: Continuous extraction of fine dust, toner particles, or cutting debris through narrow diameter hose networks.

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Bodpel Dw U Dofx Afmjdf Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Bdedpfx Ajib Dadsfmof Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Bdsdpfjyz Dilsx Afmof Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- Bdodpfxehp S Tro Afmef A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg Bsdpfx Aokm Rynsfmsdf mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. Bjdpjv Taq Rofx Afmjdf The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: new, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW weight of the machine ca. 0,08 t Bdsdsfrzt Uopfx Afmjf dimensions of the machine ca. 0,58x0,58x0,58 m

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Bdjdpenyhvqsfx Afmjf Technical documentation included.

Year of construction: 2000, condition: good (used), Stock number: 2739 Manufacturer: TEKA Year of manufacture: 2000 Type: PP-DC Number: 201320 Volume flow: 320 m³/h Max. Negative pressure: 22.000 Pa Connection diameter: 50 mm Equipment: mobile, portable Accessories: hose 3.000 mm Connection: 1.2 kW 230 V Bdsdpfx Afsmf Uzxemsf Weight: approx. 40 kg Dimensions: 300 x 300 x 850 mm without hose

Condition: good (used), Year of construction: 2002, machine/vehicle number: 121630011, Offer 24386 Technical data: - Mobile cartridge filter unit with articulated extraction arms - suitable for welding mist extraction when welding - steel + stainless steel + aluminium + unalloyed or galvanized steels - Welding fume class W3 - Control with digital display - Separation efficiency 99 % - Air volume flow approx. 3000 m³/h Bdodpju Aafdsfx Afmef - Max. static pressure 2500 pa - Filter area 20 qm² - Automatic filter cleaning - Articulated extraction arm 360° 4000 mm - Arm diameter 160 mm - Drive - fan 400 V / 1.10 kW - Space requirement approx. W 700 x H min. 2150 x D 1100 mm - Weight approx. 150 kg - Operating hours ( read ) 980 h

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Two used TEKA scrapers are offered. 1. THS 4020, built in 2009, scraper arm: 16.00 m, 2. THS 6022, built in 1993, scraper arm: 16.00 m. Bedpsv Tb A Isfx Afmedf Fully functional. For further information, see the rating plate.

Condition: used, functionality: fully functional, Year of construction: 2005, Concrete mixer TEKA TZK 2.0 Mixing capacity: 2 m³ Ceramic lining inside Not yet dismantled Bdodpfxsywn T Tj Afmef

Condition: used, Year of construction: 2016, operating hours: 10,000 h, machine/vehicle number: 978002, input voltage: 230 V, total width: 580 mm, total length: 580 mm, total height: 2,600 mm, noise level: 72 dB, space requirement height: 900 mm, suction capacity: 1,600 m³/h, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, input current: 7 A, We offer this used TEKA Filtoo welding fume extraction unit, year of manufacture 2016. Item number: 978002 Power: 1.1 kW Voltage: 230 V Frequency: 50 Hz Current: 7.0 A Bdedpfxey N I Rvs Afmsf Serial number: P26012210011016 Year of manufacture: 2016 If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Bdodpfsrhidmox Afmof Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, machine/vehicle number: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm No of Rip saw Grippers: 5 No of Cross Cut Grippers: 8 Second flexible pusher: yes Bdjdoy Nk Dfepfx Afmef

Condition: good (used), Storage location: 3108 Manufacturer: TEKA Year of manufacture: 2012 Operating hours: 5,618 h Type: Strongmaster IFA Serial number: 6907210061062 Airflow rate: 3,000 m³/h Bdjdpfx Afjy T Uxnjmef Outrigger length (approx.): 3,000 mm Features: mobile Accessories: new filter insert Connection: 1.1 kW, 400 V Weight: 160 kg Dimensions: 800 x 800 x 1,500 mm (without hose) Hose length: approx. 4,000 mm

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, cutting width (max.): 4,500 mm, feed rate X-axis: 140 m/min, section length (max.): 2,200 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS Bdsdpfx Afoyxn Ademsf The machine is equipped with two saw carriages. The technical specifications apply to both: Maximum panel width: 4,500 mm Maximum panel length: 2,200 mm Maximum saw unit tool diameter: 380 mm Maximum scorer tool diameter: 200 mm Saw blade protrusion: 95 mm Number of rip saw grippers: 5 Number of cross cut saw grippers: 8+4 Maximum feed speed: 140 m/min Saw unit 1 connected load: 15 kW Saw unit 2 connected load: 15 kW Scorer unit 1 connected load: 2.2 kW Scorer unit 2 connected load: 2.2 kW MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: Biesse-OSI EQUIPMENT Second flexible push system Quick-change system for saw blades Label printer for barcodes CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, safety, and operation of the machine at the place of destination. External reference: 5711