Used Techno-Grafica Development Equipment for sale (43,552)

Condition: good (used), Year of construction: 2016, Technografica printing plate baking line, 1550 mm, Crjdpfx Acszr Haxo Tog year of manufacture 2016, plate developing machine, manufacturer Techno-Grafica, type TPP9001M, year of manufacture 2002, 2 transfer tables, manufacturer Techno-Grafica, model CTA1550, year of manufacture 2002, baking oven, manufacturer Techno-Grafica, model EBO1550, year of manufacture 2002, degumming unit, manufacturer Techno-Grafica, model SPG1550, year of manufacture 2006, plate stacker, manufacturer Techno-Grafica, model PSTHS1550.

Condition: used, Year of construction: 2007, functionality: fully functional, ECRM MAKO 8 CTP — Specification | MAKO 8 Type | CTP 8-page Laser Technology | Violet 405 nm, single beam - 120Mw Compatible Plates | Violet photopolymer and silver halide Maximum Plate Size | 824 × 1,143 mm Minimum Plate Size | 254 × 254 mm Plate Thickness | 0.15 to 0.30 mm Resolutions | 1,800 to 3,556 dpi depending on the media Productivity | Up to 15 8-page plates/hour at 2,540 dpi Reported Repeatability | 0.025 mm typical over 6 consecutive separations Positioning Accuracy | ±2 µm with the Precision Drive System Image Scaling | 85 to 110% Workflow | TIFF 1-bit compatible via CtServer Output | Online connection to processor The machine therefore accepts a very wide range of formats, from 254 × 254 to 824 × 1,143 mm, which allows it to handle both small formats and genuine 8-page plates. Exposure/Mechanical Section The MAKO 8 uses a 405 nm violet laser. ECRM states that the single beam can be calibrated according to the sensitivity of the plate. The maximum resolution of 3,556 dpi also allows for the use of demanding screening techniques, including stochastic screening. The system is mechanically quite interesting: the plate is positioned on a pin-bar registration system and then moved under the laser head by the Precision Drive System. The documentation specifies a positioning control of ±2 µm. The registration system is interchangeable to accommodate notches corresponding to the presses used, which aims to improve plate/press registration and reduce setup time. Crjdpfxezxzm To Ac Tsg Dimensions and Installation Width: 1,066.8 mm Depth: 2,448.6 mm Total Height: 1,892.3 mm Weight: 409 kg Power Supply: 100–240 V single-phase, 50/60 Hz Maximum Power Consumption: 250 W / 3 A Thermal Dissipation: 850 BTU/h Operating Temperature: 17 to 30 °C Relative Humidity: 45 to 65%, without condensation

Condition: good (used), Year of construction: 2011, functionality: fully functional, Glunz & Jensen Quartz 85III, 2011 online plate processor for thermal metal plates 85 cm input width, Cedpozf Ivzofx Ac Terg incl. chiller cleaned & tested All offers subject to prior sale

Condition: used, Year of construction: 2010, functionality: fully functional, THERMAL processor SIRIO TH 85 with input bridge To connect inline with CTP. MACHINE IS READY TO WORK. Credjzquq Aopfx Ac Tsg

Condition: used, Year of construction: 2009, 2009 HGG Profiling Equipment PLC 600 Plasma CNC Profile Cutting Line with Procam Software Cutting Capacity Pipe Range Ø48-Ø610mm. Maximum Cutting Angle 45°. Maximum Pipe Weight 3 Ton. Note: Hard Drive Has been Removed For Sale, Replacements Are Readily Available From HGG. With Fume Extraction Unit, Safety Light Curtain Guards & Signal Tower. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Crjdszy Itvopfx Ac Teg Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 3 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tanks, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Crjdpfx Acswl H Nio Teg Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Year of construction: 2011, condition: used, Used Hauzer Techno Coating HTC-1500/4-SpuUC/2-Spu/1-P coating system for sale, manufactured in 2011. Second-hand industrial coating equipment for manufacturing applications. Industrial system for sale for international buyers seeking used Hauzer coating systems, surface treatment equipment, coating machinery, and manufacturing equipment through an industrial auction. Crjdpfxszwfiio Ac Tjg

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse. Cedezut Axjpfx Ac Tjrg

Condition: like new (used), Cove Equipment Shredder Crodpfx Acsf N Nd Ss Tog Model: SH-5 Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph

Condition: used, Year of construction: 2018, REF: MM6441 Wenzhou Jiangbo Dairy Equipment Factory Co. Ltd (Chinese) 5000L stainless-steel tank with agitator. Manufacturer - Wenzhou Jiangbo Dairy Equipment Factory Co., Ltd. Model - DCG. Csdpfx Asza T Sloc Terg Date of manufacture - 2018. Speed - 36 r/min. Electrical requirements – 415 V / 50 hz / 3 phase.

Condition: good (used), Beer / Brewery Production Equipment 9 qty insulated tanks, approx 1000 lts capacity each 2 qty large tanks, approx 1500 lts capacity each All associated pumps, chiller pump units, wash station. 2 qty tanks with lids, approx 1000 lts each 2 qty large tanks with lids, approx 1500 lts each All associated pumps, water filteration system 2 qty timber clad tanks, approx 1000 lts and 1500 ltd capacity each Cjdpjyg R Azjfx Ac Tjrg 2 qty insulated tanks, approx 1000 lts capacity each All associated equipment, heat exchanger, pumps,

Year of construction: 2024, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: 86-731-85552647/18153792542, We are a company based in 9000 St. Gallen (Switzerland) and imported this planetary ball mill from China in 2024. The unit is brand new and unused. We have switched the machine on and let it run empty for a few minutes to verify its functionality. It comes with 4 x 25-liter nylon containers. Additionally, 120 kg of zirconium beads with a 1 mm diameter are available. ~ Manufacturer's Description: The YXQM series of planetary ball mills for mass production is a machine designed for production applications, built to handle medium-scale capacities to meet industrial requirements. It facilitates the smooth transition of materials from laboratory scale to full production, ensuring consistency and repeatability of processes and thus reliable material quality. The equipment is widely used across new energy, metallurgy, electronics, ceramics, geology, mining, construction materials, chemical industry, light industry, cosmetics, environmental protection, and other enterprise-level material production sectors. Cjdpfx Aoyilnzjc Torg Extremely high centrifugal forces inherent to planetary ball mills generate intensive grinding energy, resulting in short milling times. These machines are ideal wherever the quality control process demands the highest standards of purity, speed, fineness, and reproducibility. This series can be equipped with vacuum jars, allowing samples to be ground under vacuum conditions. It is well suited for research tasks at scientific institutes, universities, and industrial R&D laboratories to verify the feasibility of scale-up to mass production, as well as for routine operations such as mixing and homogenizing soft, hard, brittle, or fibrous materials—from laboratory tests through to production. - Key Features: - High-performance, nanometer-scale grinding - Digital display, intuitive operation, precise parameter setting - Variable speeds from approx. 10 to 440/360 rpm, speed ratio 1:2 - Batch processing with up to 4×6/9 L samples, simultaneous processing of 4 materials - Electric lid opening and integrated crane for easy and convenient operation - Storage for 3 modes and 15 programs - Power failure protection with memory function and automatic restart - Suitable for dry, wet, vacuum, and protective atmosphere grinding - Machine stops upon lid opening; automatic interlock prevents accidental release - Equipped with rollers and swiveling feet for easy movement and stable operation Applications: Grinding, mixing, homogenizing, colloidal milling, mechanical alloying, mechanochemistry Fields of Application: New energies, geology/metallurgy, glass/ceramics, engineering/electronics, building materials, environment/recycling, agriculture, chemistry, medical, biology Feed material: Soft, hard, brittle, fibrous – dry or wet Size reduction principle: Impact, friction Feed size: < 5 mm soil, < 10 mm Final fineness: For colloidal milling, samples below 0.1 micron Number of grinding stations: 4 Grinding methods: Dry grinding, wet grinding, vacuum grinding, grinding under protective atmosphere

Condition: new, functionality: fully functional, power: 196 kW (266.49 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: Cjdpozi Uyzjfx Ac Torg * Closed circuit crushing till to get desired size of product * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. It has been used to process used sunflower and palm oil. Credjyhc Rgjpfx Ac Tsg Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: good (used), 1 x Mono doughnut fryer. model FG059-B02 Credpfx Acoy S Td Hj Tog

Condition: used, machine/vehicle number: 92, Continous Form Collator Micro Pack S 50Serial-No. 92-164 / 1992/51/ mpkc 6 Stationen / Stations Format / Size max. 330 x 12 Zoll umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Codpfjrbnnpex Ac Tsrg

Condition: used, This listing is for a Woodley Equipment Clinispin 642E Horizon Centrifuge Credpsxzh H Sofx Ac Tsg

Condition: good (used), 1 x Food engineering development incline conveyor. Crjdpjvwci Defx Ac Tsg

Condition: used, - Cooking chamber dimensions: 1200x2000 mm - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment). Credpfowxmn Sex Ac Tjg

Condition: new, power: 161.81 kW (220.00 HP), fuel type: diesel, Year of construction: 2024, For Sale: High-Performance NEW BUILD Dredger Perfect for Dredging in Marinas, Harbours, Sand & Gravel Mining Are you looking for a reliable floating dredger to meet your dredging needs? This high-efficiency with low cost suction dredger is ideal for a wide range of applications, including marinas, harbours, and mining operations. Codpfx Acou Afi Ie Torg Key Features: Powerful Suction System: Ideal for dredging sand, gravel, slurry, and more. Versatile Applications: Perfect for clearing harbours, marinas, and inland waterways. Durable Construction: Built for long-term use in harsh marine environments. Efficient Operation: Maximize productivity in mining and excavation projects. Specifications: Dredging depth: 10 mtr (can be customized to 15 mtr dredging depth) Pump capacity: 450m3/h Engine power: 220hp Suction pipe diameter: DN200 Whether you're managing a marina, expanding a harbour, or working on a sand and gravel mining project, this suction dredger provides the performance and reliability you need. We design and build new dredging equipment, and we also have used dredgers on stock. Contact us today for pricing and more details!

Condition: used, Year of construction: 2019, Vaupel Air Tower, manufactured by Gram Credpfx Acezhvvbs Tsg Filter line with fan Type/Model: FL 52 / VE 5500 / W3 Condition: Used Year of manufacture: 2019 Technical data Number of filter cartridges: 4 Number of solenoid valves: 4 G102 filter area: 52 m² G105 filter area: 84 m² Compressed air: 30 l/min Dust container: 35 l Weight: 630 kg Dimensions L x W x H: 1400 mm x 1200 mm x 2490 mm

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Crjdpfx Ajzbyn Nsc Tjg Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Price ex works: only €9,950 (net), if disassembled by the buyer! Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Year of manufacture: 2014 Credpfxszbynpe Ac Teg Serial number: 14/0559 Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Csdpfezn N Nnjx Ac Torg

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Show Machine, New Machine at an Unbeatable Price!!! The machine offered here is a new trade show model from year 2025, which was exhibited at the EMO show in Hanover in September 2025 and is now looking for a new owner. The machine is new! Demonstration unit! The original list price for this machine is €295,000. Our unique offer for this machine: €199,000!!! including delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and tested from December 2025. Cutting samples and cutting videos are available. Cjdpfx Acsxlt Hfe Torg From here, you will find the machine description. G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system features premium components and a distinctive design Cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Maximum sheet weight [kg/table]: 2,150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (quality cut/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm Suitable for processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for laser safety Compact design saves shipping costs and reduces installation time Hollow structure design suitable for up to 60 kW Improved access via a full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for thick materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated control cabinet and laser source with maintenance-friendly access Various automation solutions available Fast service response thanks to remote service support Fully enclosed machine with OD5+ laser safety glass windows CE compliant The control cabinet, laser source, pneumatic system, lubrication system, and the table drive motors are fully integrated into the main frame. Simple visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Easy cutting of a wide variety of small parts Faster response times for demo cuts Higher dynamics & productivity Thanks to the optimized machine frame and extruded aluminum gantry, equipped with the fast real-time controller 'Han’s 901 (Rexroth)' and powerful Rexroth motors, the HF Expert achieves exceptionally high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drives: Rexroth, Germany Cutting head: Han’s Laser Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China