Used Sw Ba 40 for sale (27,052)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 63,368 h, This 3-axis SW BA 40 vertical machining centre was manufactured in 2001. It features an impressive X-axis travel of 1300 mm, Y-axis travel of 630 mm, and Z-axis travel of 630 mm. The machine is equipped with a powerful spindle speed range of 20 - 7,500 rpm and a tool magazine with 60 slots. If you are looking to get high-quality machining capabilities, consider the SW BA 40 machine we have for sale. Contact us for further details. - X-Axis Travel: 2 x 1300 mm (3350 mm in long-bed operation)- Y-Axis Travel: 630 mm- Z-Axis Travel: 630 mm- Clamping Surface (Pendulum Operation): 2 x 1275 x 630 mm- Rapid Traverse X/Y/Z: 40 m/min- Feed Rate: 1 - 40,000 mm/min- Spindle Diameter: 100 mm- Spindle Speed: 20 - 7,500 rpm- Spindle Power: 36 kW (at 25% ED)- Spindle Torque: 950 Nm (at 25% ED)- Tool Taper / Holder: SK 50 DIN 69871, Form B- Tool Magazine Slots: 60- Max Tool Diameter (Free Neighboring Slots): 110 mm (250 mm)- Max Tool Weight: 8 kg (24 kg)- Measuring System: Linear- NC Rotary Table: Peiseler ATU 280 with counter-bearing- Coolant Pressure (Internal): 40 bar- Coolant Cleaning: Gap filter- Work Area Flushing: Yes- Flush Guns: 2- Tool Breakage Monitoring: Leutze- Enclosure: Full enclosure- Extraction System: GEA-Delbag, 2 x KNAW 1-1-AF- Floppy Disk Drive: Yes- Required Footprint (L x W x H): 7700 x 3700 x 4000 mm- Foundation Required: No- Nominal Service Voltage: 3/PE AC 400V / 50Hz- Nominal Working Current: 87 A- Total Connected Load: 50 kVA (60 kVA rated capacity)- Supply Line Fusing: 100 A- Working Hours: 63,368 h- Optional Equipment: Extended machine hydraulics for workpiece clamping, valve system for double-acting clamping cylinders, 2 clamping circuits in left work area, 2 clamping circuits in right work area, clamping pressure 250 bar / Q=9 l/min, adaptation for angle drill heads (without 4-point support), automatic loading doors, approx. 60 SK50 chucks, 1x double angle head, reversible clamping device (A-axis and counter-holder), clamping bridge Nodpfxjzxpcpe Akiswn

Condition: ready for operation (used), Year of construction: 1998, Available immediately, ex works: Vertical CNC machining center, SW Schwäbische Werkzeugmaschinen Type BA 35 300 Year of manufacture: 1998 Nwsde Adnwaspfx Akion CNC control: Siemens 840 D Travel distances X/Y/Z: 2650/500/500 mm Swinging operation possible: 2 x 750 mm Spindle: 17 kW Tool holder: SK 40 Chain magazine: 36 positions Spindle speeds up to 10,000 rpm Chip conveyor Weight: 9 tons Price: EUR 6,500.00 plus VAT, ex works.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS COMPATIBILITY FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Suitable for: Linde H50D FEATURES Design: 360° rotating device with rotating clamp Internal opening: approx. 400–1,800 mm Fork positioner: present (?) MACHINE DETAILS MANUFACTURER AND MODEL Nsdpfxe Ad N Igj Akiswn Manufacturer: Linde Type: Rotating clamp Year of manufacture: 2020 Previous use: Linde H50D with 5,000 kg load capacity DIMENSIONS Width: approx. 1,700 mm Height: approx. 1,000 mm Length: approx. 1,250 mm EQUIPMENT 360° rotating device Rotating clamp Fork positioner Lot number: 1139 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: used, Year of construction: 2015, operating hours: 1,662 h, load capacity: 800 kg, lifting height: 1,580 mm, fuel type: electric, construction height: 1,860 mm, gearing type: automatic, overall weight: 679 kg, empty load weight: 495 kg, total length: 1,777 mm, color: red, mileage: 1,662 km, first registration: 08/2015, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, The BT SWE 080L is the ideal solution for companies that value efficient warehouse logistics, compact design, and reliable technology. This model stands out due to its sturdy construction, easy operation, and well-thought-out ergonomics, which significantly simplify daily warehouse operations. Equipped with an automatic transmission, the stacker offers exceptionally comfortable and precise handling. The operator can fully focus on the task at hand while the vehicle ensures smooth and controlled movements. The BT SWE 080L particularly demonstrates its strengths during frequent maneuvering or when working in narrow warehouse aisles. With only 1,662 operating hours, the truck is in very good technical condition, making it an economically attractive investment. Thanks to its initial registration in August 2015, you benefit from modern technology combined with a very moderate level of use. With a lift height of 1,580 mm, this high-lift pallet truck is perfectly suited for storing and retrieving pallets on low to medium racking levels. Its compact design – with a length of 1,777 mm, a width of just 726 mm, and a height of 1,863 mm – enables efficient use of confined warehouse spaces. Nsdpeyigpgefx Akiown The distinctive red color scheme not only provides a professional appearance but also represents the robust build quality for which BT vehicles are valued in daily operation. Sale is only to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-23 Nedpfx Aozudu Sekiewn Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, - Year of manufacture: 2003, commissioning: 2004 - Working dimensions: 4000x1600x200mm - Main spindle: 7.5kW - C-axis - Gluing unit - Drills: 12x vertical - LED display of the vacuum pump position - Tool magazine: 12 slots Nodeza Uryepfx Akiewn

Condition: ready for operation (used), Year of construction: 1965, Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible. Nwedpfx Akozukthoijn

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Siemens Sinumerik 840D control system Two spindles Number of controlled axes: 4 Maximum spindle speed: 17,500 rpm Spindle power: 18 kW X-axis travel: 400 mm Nsdpfoykumxjx Akiswn Y-axis travel: 700 mm Z-axis travel: 400 mm Power consumption: 68 kVA

Condition: used, Year of construction: 2019, functionality: fully functional, operating hours: 7,996 h, power: 10.3 kW (14.00 HP), controller manufacturer: HOLZ-HER, actuation type: electric, Equipment: documentation/manual, For sale, directly from our kitchen and interior production facility. Compact vertical CNC woodworking center for drilling, milling, and grooving sheet material. The machine is offered including the tools, manuals, and electrical diagrams listed below. MACHINE DETAILS • Brand: HOLZ-HER Maschinenbau GmbH, Austria • Model: Evolution 7405 4mat - BAZ19V5 • Year of construction: 2019, invoice and commissioning in 2020 • Control/software: CAMPUS 7.5.3.10 • Vacuum pump: Becker VT 4.8 • First owner • Automatic central lubrication • 2D barcode scanner USAGE DETAILS Meter readings as of October 1, 2026: • Machine operating hours: 7,996 hours • Active feed ("Vorschub aktiv"): 598 hours • Workpiece counter: 22,887 Nedpfx Ae Ab Uzaskiswn • Tool changes: 21,584 • Last maintenance on July 2026, complete history available INCLUDED TOOLS • 1 left-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø20 mm, length 28 mm • 1 right-hand cutting milling cutter Ø8 mm, length 22 mm • 1 right-hand cutting milling cutter Ø10 mm, length 22 mm • 1 drill Ø35 mm, length 15 mm • 5 drills Ø5 mm, length 25 mm • 1 drill Ø8 mm, length 35 mm • 1 drill Ø10 mm, length 35 mm • 1 drill Ø10 mm, length 90 mm • 5 drills Ø8 mm, length 15 mm • 1 saw blade Ø120 mm, thickness 4.5 mm DOCUMENTATION • Manuals available • Electrical diagrams available • Machine software installed on the CNC SALE AND PICK-UP The machine is still operational (located in the Anzegem area) and can be demonstrated by appointment. Availability and pick-up by arrangement. Dismantling, loading, and transport are not included. Demo video available upon request. Interested? Contact us for additional information or to schedule a viewing.

Condition: used, functionality: fully functional, Year of construction: 1992, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, pressing force: 250 t, table length: 4,050 mm, type of input current: three-phase, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ Nedpfxjy D Sy Ro Akijwn - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0748, film width: 400 mm, compressed air connection: 6 bar, number of blades: 1, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this used Ravizza Packaging SRL SIMPLICITA BAG SMART 400H pouch-making machine, manufactured in 2021. Manufacturer: Ravizza Packaging SRL Model: SIMPLICITA BAG SMART 400H Year of manufacture: 2021 Condition: used Category ID: 536 Type ID: 1939 Machine type: pouch-making machine For sale is a high-quality packaging system from the manufacturer Ravizza Packaging SRL (Italy). Additionally equipped with: EIDOS Swing Mk II thermal transfer printer integrated conveyor belt film feed existing film rolls as shown in the photos Condition: The system is in good condition and was used in production until recently. Normal signs of wear and tear corresponding to its age and area of application are present. An inspection and demonstration of the machine's functionality are highly recommended and can be arranged by appointment. Collection: The machine is located in Germany, 63589 Linsengericht, and is available for inspection and collection. Nwsdpfo Ad Ivpjx Akion Loading can be supported upon agreement.

Condition: used, Year of construction: 2023, operating hours: 1,621 h, machine/vehicle number: 6000030, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 575 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 875 mm, total height: 6,600 mm, total length: 8,200 mm, total width: 4,800 mm, overall weight: 32,000 kg, spindle speed (min.): 17,500 rpm, spindle speed (max.): 1 rpm, distance table to spindle center: 1,300 mm, distance table center to spindle nose: 425 mm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Technical Data Operating time: 1,621 hours Technical Data Supply voltage: 3 × 400 V / 50 Hz (earthed) Supply system: TN-S or TN-C system Total connected load: 105 kVA Nominal load factor RDF: 0.6 Circuit breaker: 160 A gG (5 s) Dimensions Footprint including coolant cleaning system (W × H × D): 8.20 × 4.80 × 6.60 m Weight Nsdpfx Aj Aax U Iekiewn Operating weight of the machine: 32,000 kg Transport weight: 27,000 kg Control System CNC control: SIEMENS SINUMERIK 840D SL Main Spindle Spindle arrangement: horizontal Design: liquid-cooled motor spindle, AC synchronous technology Spindle lubrication: oil lubrication with minimum quantity lubrication Tool holder: HSK-A63 Tool Clamping System Mechanical clamping force: > 18 kN Setting dimension: 10.5 ± 0.1 mm Performance Data Speed range: 1–17,500 min⁻¹ Acceleration time: 0.7 s Power: 35 kW Nominal power: 26 kW Torque: 80 Nm (40% duty cycle) Nominal torque: 60 Nm Tool Magazine Tool change system: pick-up Tool management: permanently coded Capacity: 40 (1 × 40) tools Maximum total tool load: 200 kg Working Area X-axis: 3000 mm Y-axis: 1800 mm Z-axis: 875 mm Distance between spindle and center of swivel table: 425–1300 mm Tool change position X/Y/Z: 0/0/-310 mm Drive System General Design: Three-phase linear motors Position measuring system X-/Y-/Z-axis: direct, absolute X-axis Rapid traverse speed: 120 m/min Maximum acceleration: 10 m/s² Relative acceleration increase (G0): 200 m/s³ Relative acceleration increase (G1): 50 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Y-axis Rapid traverse speed: 120 m/min Maximum acceleration: 16 m/s² Relative acceleration increase (G0): 600 m/s³ Relative acceleration increase (G1): 300 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Z-axis Rapid traverse speed: 120 m/min Maximum acceleration: 20 m/s² Relative acceleration increase (G0): 1000 m/s³ Relative acceleration increase (G1): 500 m/s³ Peak force: 7,000 N Nominal force: 3,500 N Accuracy Positioning accuracy A: ≤ 0.010 mm Repeat accuracy R: ≤ 0.006 mm Tool Change Average chip-to-chip time at n < 17,500 min⁻¹: 4.00 s Workpiece Handling Design: Swivel table driven by an AC servomotor with two opposing clamping surfaces Swivel table: bilateral locking via gear coupling, hydraulically actuated Swivel time 0/180 degrees: 4.0 s Maximum asymmetrical load: 3000 Nm Repeat accuracy at a diameter of 1200 mm: ≤ 0.010 mm Maximum dimensions of clamping device and workpiece: Ø 2200 mm × 3480 mm Maximum weight of clamping device and workpiece per side: 1000 kg Swivel range: 358° Swivel range with parallel loading: -16°–0° and 164°–180° Worm gear division: 2° Maximum speed: 16 min⁻¹ Interface for Control Programs Rotary Distributor Rotary distributor pair for NC rotary table (A/U-axis): unregulated, leak-proof sealed Distribution channels: 16 Maximum hydraulic operating pressure: 250 bar Maximum operating pressure: 8 bar Nominal diameter: 6 Maximum permissible speed at p = 200 bar: 20 min⁻¹ Hydraulic System Operating pressure: 250 bar Flow rate: 9 dm³/min Capacity of the hydraulic tank: 120 dm³ Hysteresis when charging the accumulator: 230–260 bar

Condition: new, Year of construction: 2025, LG WATER SOLUTIONS LG SW 400 GR REVERSE OSMOSIS MEMBRANES – 36 UNITS Lot of 36 new and unused LG Water Solutions reverse osmosis membrane elements. All units remain sealed and originate from the surplus spare-parts stock of a PET manufacturing plant. TECHNICAL DATA Manufacturer: LG Water Solutions Model: LG SW 400 GR Equipment type: Reverse osmosis membrane elements Application: Seawater reverse osmosis (SWRO) Dimensions: 8 × 40 inches Certification: NSF certified Nedpfezvlrzsx Akiown Quantity available: 36 units Condition: New, unused and sealed Origin: Surplus spare-parts stock from a PET manufacturing plant

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Nwsdoy Ah Rcspfx Akien Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: used, Year of construction: 2017, Working range X-axis: 550 mm Y-axis: 450 mm (tool change position 725 mm) Nwodpjz R Szrefx Akien Z-axis: 375 mm Workpiece carrier Double swivel carrier with counterbearing and crown gear, swivel time 0/180°: approx. 3.0 s A- and U-axis for fixture plate: max. ø475 × 830 mm Drive system: torque motor Load capacity: 2 × 360 kg Speed range A- and U-axis: 1–50 rpm C- and W-axis (optional): 2 or 4 satellites Work spindle Tool interface: HSK-A63 Speed range: 1–10,000 rpm (optional 1–17,500 rpm) Run-up time to max. speed: < 0.4 s (< 1.0 s with optional spindle) Spindle bearings: ø80 mm Power: 32 kW (40% duty cycle) Torque: 72 Nm (40% duty cycle) Feed drive Drive system: ball screw Rapid traverse X/Y/Z: 75 m/min Axis acceleration X/Y/Z: 10 / 10 / 15 m/s² Max. feed thrust X/Y/Z: 8,000 N Accuracy Position measuring system: direct, absolute Positioning tolerance X/Y/Z: Tp = 0.008 mm Tool magazine Tool change system: pick-up Capacity: 40 pockets (optional 64 or 80) Max. tool diameter: 70 mm / 160 mm (with free adjacent pockets) Max. tool length: 275 mm Max. tool weight: 7.5 kg Chip-to-chip time: approx. 2.5 s Weight and dimensions Total weight: approx. 9,500 kg Transport dimensions (W × H × L): 2.75 × 2.85 × 3.65 m Machine installed (W × H × L): 3.85 × 3.70 × 6.30 m Connected load Operating voltage: 3 × 400 V, 50 Hz, TN-S/TN-C Total connected load: approx. 64 kVA Mean air consumption: 0.5 Nm³/min (6 bar) CNC control Siemens SINUMERIK 840D

Condition: used, mileage: 650,000 km, fuel type: diesel, Year of construction: 2021, IVECO S-WAY 480, year 12/2021, automatic transmission, retarder, intelligent third axle, curtain-sided body measuring 7.40 x 2.55 x H 2.60 m with lift/lower and sliding roof, retractable Anteo tail lift with 2,000 kg capacity, /70 tires, full air suspension, 650,000 km. Financing or leasing available on site. Nwjdpfjy Dglhox Akion

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). Nwodpeyvac Aefx Akion 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Nwodpfx Akjzcyqmjisn

Condition: used, Year of construction: 2012, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working range X max. 4000 mm Working range Y max. 1550 mm Workpiece thickness max. 300 mm (incl. clamping devices) 5-axis main spindle HOMAG DRIVE5+ Spindle power 15 kW (S6) / 12 kW (S1) Spindle speed 1000 - 24000 rpm Tool clamping system HSK-F63 18-position rotary tool changer Pickup station for saw blade Ø 350 mm Drilling head with 21 spindles 17 vertical drilling spindles 2 horizontal drilling spindles in X-direction 2 horizontal drilling spindles in Y-direction Grooving saw swivelling 0° / 90° Edge banding unit HOMAG POWER EDGE 360° edge banding Pre-cutting station 2-position edge roll magazine 2 independent Y-axes for main spindle and edge banding unit Console table with 8 consoles Vacuum clamping devices 2 vacuum pumps, total capacity 2x 100/140 m3/h Control HOMAG powerControl PC85 Programming system woodWOP 6.0 (according to original order configuration) woodWOP Premium package incl. 4 single-user licenses / woodWOP Wizard / woodWOP technology database / woodWOP CAD/CAM Standard interface / DXF interface / woodMotion machining simulation / woodScout diagnostic system / collisionControl collision monitoring / Schuler MDE Basic machine data acquisition Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Nwsdpfxoy S Edxs Akijn Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar Nodpfxoz Sb Rlj Akijwn * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: new, Year of construction: 2026, drilling capacity: 40 mm, throat depth: 1,220 mm, spindle speed (min.): 110 rpm, spindle speed (max.): 2,900 rpm, overall weight: 1,710 kg, spindle stroke: 200 mm, spindle mount: MK 4, Drilling capacity in St 60 40 mm Drilling capacity in GG 20 40 mm Thread cutting (St 60 / GG 20) M 27 / M 36 Tool holder short spindle MK 4 Projection center spindle / column min. - max. approx. 210 - 1220 mm Clamping surface machine table approx. 1200 x 510 mm T-slots in the machine table: Number x width 3 x 18 mm Distance drill spindle - table min. - max. approx. 375 - 675 mm Distance drill spindle - base plate (= option) min. - max. approx. 1075 - 1375 mm Spindle stroke approx. 200 mm Feed rates approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / U Nsdpfx Aetzkmbekiswn Speed range of the main spindle: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth) approx. 2500 x 1200 x 1710 mm Net weight approx. 1710 kg Drive power spindle motor 400 V, 50 Hz approx. 2.2 / 4.0 kW

Condition: repair required (used), Year of construction: 2001, functionality: not functional, machine/vehicle number: 1640137, Technical characteristics: # Machining workspace: X 400 mm; Y 450 (700) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 2 twin horizontal spindles + 2 rotary tables A1/2 NC (33.3 rpm), with hydraulic clamping mounted on indexable rotary table A3 (0 to 180° in approx. 4 sec). # Rapid traverse speed: X, Y, Z 1–40,000 mm/min # Positioning accuracy Tp: 0.01 mm # Distance between spindles: 400 mm # Spindle speed: 50–12,500 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x30 tool positions / chip-to-chip time 4.5 sec # Maximum tool diameter 75 mm / Maximum tool length 275 mm / 10 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 68 kVA Nwedpfx Aksxvyfvoisn Dimensions: # Installation footprint: approx. 6.35 x 4.5 x 4.2 m # Machine dimensions: approx. 4.6 x 3.0 x 3.0 m # Weight: approx. 13,800 kg Equipment includes: # CNC controller: Siemens 840C # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll 400K-1/950 RSF100 # Oil cooling unit # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil vapor extraction/recovery system # Tool presence detection system in spindle

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. Nsdpfx Akez Agv Ujiown - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Nwsdpfx Aoz Agw Eokion - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. Nedpfx Akez Ag Rrsiown - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.