Used Suga Upper Support for sale (14,523)

Condition: good (used), Upper support, upper slide, dovetail guide, cross table -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos -Dimensions: 830/610/H300 mm Pjdpfx Ansfnxw Tezjpw -Weight: 119 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, spindle drive for upper support -Spindle drive: for upper support -Trapezoidal spindle: Ø 20 mm -Dimensions: see photos Ppjdpfjxfzuwjx Anzsw -Dimensions total: 450/155/H110 mm -Weight: 5.4 kg

Condition: used, Upper support, upper slide, dovetail guide, tool slide, cross table Ppsdpfx Aofnxxfenzow -Tool slide: from automatic lathe SUGA type STS-2 -Measurements: see photos -Dimensions: 1080/530/H290 mm -Weight: 121 kg

Condition: used, Upper support, upper slide, dovetail guide -Rezess: Ø mm Ppsdpfx Ansd Ebpmezow -Hole circle: Ø mm -Dimensions: 121/295/H200 mm -Weight: 12 kg

Condition: good (used), Upper support Bolt circle diameter 180 mm Depth 230 mm Width 600 mm Ppjdpfx Aeccrqfonzjw Height 460 mm

Condition: good (used), Obersupport Masse : L.530 x B.270 x H.350 mm Pedpfx Ajb Eyb Aonzjpw

Condition: good (used), Upper support Base plate 300 x 320 mm Bolt circle 265 mm in diameter Ppjdpfxsb E Nw Io Anzow Centering flange 100 mm in diameter Distance from base plate to steel holder: 185 mm

Condition: good (used), Upper support Sled width 145 mm Height 72 mm Bolt circle 180 mm Centering pin diameter 70 mm Contact surface 240 x 220 mm Weight 23 kg Podpfx Anodq Nviezspw Shipping dimensions: L 490 mm W 220 mm H 270 mm

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm -Gearbox: Suga type SGM-1 Pedpsfnln Defx Anzopw -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump Pedpfofnqhiox Anzjpw -Hydraulic unit: from automatic lathe SUGA type STS-2 -Manufacturer: Nachi Model VD 11B-25-25-AL -Motor: Toshiba type IK/FCKL3-I -Power: 1.5 kW/1400 rpm -Max. Pressure: 19.6 bar -Liter output: 25 l/min -Dimensions: 570/390/H250 mm -Weight: 51 kg

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Temperature range: +10° to -80°C Capacity: up to 300L Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Currently, up to 5 units are available for sale. The units are currently out of service and stored. The new price per unit was >40,000 EUR. Ppjdpfx Anezhuuvszsw

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. Podpfx Anoq E Ti Hjzspw If you want to try it, please bring cable.

Condition: excellent (used), Year of construction: 2013, AMADA MODEL GS 11 840 8 mm x 4050 HYDRAULIC year 2013 PROGRAMMABLE CNC SHEAR STAINLESS STEEL CAPACITY 6mm ALUMINIUM CAPACITY 10 mm CUTTING LENGTH 4050MM POWER BACK GAUGE 1000MM PNEUMATIC SHEET SUPPORTS Pedpfx Anoyr H U Dszspw SIDE GUAGE 1.5 METRE SERIAL NUMBER HOLD DOWN HYDRAULIC BLADE GAP ADJUSTMENT STANDARD VARIABLE RAKE STANDARD SHADOW LINE LIGHT STANDARD CENTRALISED LUBRICATION STANDARD SHADOW LINE LIGHT STANDARD STROKE COUNTER STANDARD ADJUSTABLE STROKE STANDARD MOTOR 16 KW WEIGHT 11650KG

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION Podoyypb Ropfx Anzopw FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS

Condition: used, Type : Stirrer / Dissolver Wall support: manual Previous use: paint Stirring mechanism: dispersing tool Pedpox R Ayhsfx Anzspw Stirring head diameter: 200 mm Stirring shaft length: 950 mm Up/down travel: 950 mm

Condition: good (used), Support rail for press brake, bending machine, guillotine shear, stop rail, clamping rail -Support rail: for profile steel shears, flat steel shears -Receptacles: Ø 42 mm -Hole spacing: 550 mm -Dimensions: 690/200/H290 mm Podpfx Aeznkrwsnzspw -Weight: 10.1 kg

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Pjdsttc Uajpfx Anzjpw

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Podpfx Anszi Dykjzspw Quantity: 3 available System support for SLS-line A3-A6 B00978-04-02 LEONI

Condition: used, Year of construction: 2000, Overview The SAME barrel support cradles are V-shaped metal supports specifically designed for wineries, ensuring stable and secure positioning of oak barrels during storage, handling, and washing operations. Their geometry guarantees optimal load distribution and perfect barrel support, reducing stress on the barrel structure. SAME standard supports are fully compatible with automated barrel washing lines, making them ideal for professional cellar operations. Technical Data:  A total of 488 units are included in this lot. Key Features - Equipment Type: Barrel support cradles / sleepers for wineries Ppedpfx Aoyiamronzow - Design: V-shaped structure for secure barrel positioning - Barrel Capacity: 2 barrels per support - Compatible Barrel Sizes: 225 to 700 liters - Manufacturing Process: Robotic MAG continuous wire welding - Structural Strength: High resistance to load, handling, and mechanical stress - Surface Finish: Oven-cured polyester powder coating - Compatibility: Suitable for automated barrel washing systems - Application: Wine cellar barrel storage and handling - Quantity: 488 units Dimensions (Standard 225 L Barrel Support) - Length: 1,430 mm - Width: 610 mm - Height: 364 mm

Condition: used, -type: HF 727091 -Shaft: Ø 25 mm, height of shaft axis 80 mm -Base plate: hole spacing 180/180 mm / M20 -Quantity: 1x bearing block available -Dimensions: 250/230/H115 mm -Weight: 8.8 kg Podouz Ia Hopfx Anzepw

Condition: used, Support grinding device, support grinder, support grinding device, circular grinding device, bench grinder, grinding machine, stand grinder, stand grinder, combination bench grinder -Grinding device Ppodpfx Ansd N D Ddjzew -Voltage: 380V -Drive: 1.6/1.15 kW -Speed: 2800/1400 rpm -Dimensions: 390/223/H240 mm -Weight: 20kg

Year of construction: 2002, condition: used, fuel type: electric, Running gear, support wheel, load wheel tandem, load rollers, steering roller, support roller, fixed roller, swivel wheel Pedji Dpzdopfx Anzopw -Manufacturer: Powerthane / Jungheinrich, jockey wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Number: 1x support roller available -Price per piece -Dimensions: 235/160/H240 mm -Weight: 13,1 kg/pc.

Condition: excellent (used), Guide rail - support rail for shafts, rails Psdpfx Ansb A N Rxezspw -Type: 1050-620-00 -Holes: 6.5 mm -Holes spaced 100 mm -Price: per piece -Quantity: 6 pieces available -Dimensions: 600x50xH23 mm -Weight: 1 kg/piece

Condition: good (used), Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Dimensions: 530/420/H730 mm Ppjdpfx Asg Dg Rpjnzow -Weight: 80 kg

Condition: good (used), Stop for press brake, bending machine, guillotine shear..., clamping angle, clamping aid, support rail for press brake, bending machine, guillotine shear, stop rail, clamping rail -Support rail: Length 925 mm -Support width: 130 mm -Overall dimensions: 935/265/H80 mm Ppsdpfswcxmbex Anzjw -Weight: 17.8 kg