Used Stas Agrostarv 10 Ca.56 M³ Neufahrzeug Universaltür for sale (89,719)

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension: Disc brake 430 mm Hsdefi Nmuspfx Aqter Jost (formerly Mercedes DCA) axle units, 3 x 9 tons, with air suspension, air springs arranged centrally to the chassis longitudinal beam. First axle can be lifted with starting assist and manual forced lowering. Smart Board information center, lift/lower valve, BVA brake wear indicator. Tires and wheels: 6 wheels with tires size 385/65 R22.5, from various manufacturers (manufacturer's choice), with steel rims 11.75 x 22.5 ET 120. Fifth wheel: Mechanical version with single-sided operation in 2 speeds with pivoting base for air suspension. Braking system: According to E.G. standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS incl. RSS (Roll Stability System) and Premium modulator, Wabco Smartboard information center, aluminum air tank system. Electrical system: According to STVZO guidelines, with 2 five-chamber lights, type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x5-pole sockets, with side marker lights, 2 separate LED rear lights, 1 LED interior light. Tipping body/dump bed: Internally fully welded. Aluminum dump bed, side walls with 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide. Floor made of 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall reinforced, 4 mm thick, in a straight design. Rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 configuration, with a grain slide, or alternatively in a 1/2-1/2 configuration with a grain slide on each side. Aluminum round profile welded on the side and bottom for sealing the door gap on the rear doors. Rear doors partially covered with smooth aluminum. Operation of the universal door automatically pneumatic with separate lever that can be locked. Rear supports made of aluminum, can be swung out. Two retaining straps with rubber buffers on the tipping body, attached to the frame at the front wall. Hydraulic system: Tipping cylinder with large cylinder body Hydraulic cylinder mounted on the front wall with a max. working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees. Accessories: 6 Parlok fenders, complete mud flaps covering the entire vehicle width attached to the U-profile. Aluminum spare wheel holder. Folding side impact protection on the right side. Large tool box, type 860. Approx. 3 m aluminum ladder. 3 aluminum swing supports mounted centrally, approx. 150 mm higher. Additional centrally mounted support receiver for positioning a total of 2 supports to increase the loading width. Tarpaulin with a central light strip and separate reinforcements in the wear areas, approx. 660 gr./m2 quality, with tarpaulin system. Circumferential rubber rope in the rear end of the tarpaulin to be attached to two tension hooks on the rear swing support. Walkway on the frame in chassis color. Tarpaulin closure with quick-release fastener. Tarpaulin end at the rear with welded-in rubber rope to prevent water ingress. Robust folding underrun protection with two towing eyes left and right incl. locking pin. 2 "Clear-Pass" mud flaps on the fender according to EG standard, attached to the frame on the side. Aluminum grain chute with tarpaulin bag attached to the frame on the side. Holder for s

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, two-line system, spring system, brake system according to E.E.G. standard. standard, two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, hydraulics make Edbro with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, skip also mud-tight on request! Combi door 2/3-1/3 divided with grain slider and autom. pneum. Locking FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ transfer costs Hedpfeu Dvw Sox Aqtjr Also available in the variants Z9-Z13 *Pictures and offers are subject to change*

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. Hedpfx Asxplxzoqtsr HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3x9 tonne capacity with air suspension, first axle with lift function including starting aid and electric operation, raise and lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385 / 65 R22.5 tyres on STEEL rims, 2" king pin bolted into a 10 mm thick plate, mechanically operated landing gear with single-side operation, braking system compliant with E.E.C. regulations, two-line air system, spring brake actuators on two axles and Wabco EBS unit with RSS system (Roll Stability Support), aluminium air tank, electrical system per German STVZO with two Aspöck five-chamber lights, 24V installation, aluminium tipping body, Edbro-brand hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mudflaps, side underrun protection, rear underrun protection, catwalk on the chassis, fully welded, LL rubber seal, spindle locks on the rear door, tipping body available with mud seal on request! Combination tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. FURTHER EQUIPMENT AVAILABLE ON REQUEST. COLOR FREELY CHOICEABLE. +590 € transport costs. Also available in Z9-Z13 variants. Hsdpfxoyh S Aco Aqtor Images and offers are subject to change.

Condition: used, maximum load weight: 34,120 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 88 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-axle STAS Walking Floor Semi-Trailer, 88 cbm First registration 07/2024, from the first owner Mileage only 69,324 km Internal dimensions (L x W x H) 13,513 x 2,475 x 2,536/2,752 mm >>> Fifth wheel height 1,200 to 1,250 mm Axle distance 1,310 mm Unladen weight 7,880 kg Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO Trailer EBS with anti-roll system RSS WABCO Smartboard with axle load display >>> 1st and 3rd axles are lift axles >>> WABCO OptiTurn steering system to reduce the turning radius Air tank, aluminum Tires 6x 385/65 R 22.5 Crank-operated fifth wheel JOST, full load capacity Lighting ASPÖCK, full LED Hsdpfxjy S Nqcj Aqtjr 4 x LED work lights Toolbox on the rear, left side Side walls, profile joints completely welded on the inside CARGOFLOOR sliding floor with 21 planks, material thickness 10 mm, ribbed >>> with floor reinforcement for forklifts and full load, slide bearings Control with WIRELESS REMOTE CONTROL End plate at the rear, made of stainless steel Stanchions, 2 pieces, reinforced waste disposal version Roof roll tarp, reinforced version >>> Rear crossbar pivoting, operable from the ground RENTING is the new BUYING, and with us, it is immediately available, even with FULL-SERVICE RENTAL.

Condition: used, functionality: fully functional, empty load weight: 7,990 kg, maximum load weight: 28,010 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2023, loading space length: 13,450 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R 22,5, color: white, Year of construction: 2023, Object number #30572 Cargofloor 10 mm moving wall pneumatic door locking Jost axles disc brakes 2x lift axle tyres 385/65 R 22.5 body inside dimensions: 13,450 x 2,450 x 2,700 mm portal doors rolling tarp platform with ladder Wabco Smart Board with 212,081 km toolbox work lights Hjdpfx Aqsx Art Sster side underrun protection holder for ladder/broom rear light guards raise/lower function ABS/EBS Jost landing gears Leasing or financing available on request!

Condition: used, maximum load weight: 33,910 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2025, next inspection (TÜV): 11/2026, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle STAS Walking Floor semi-trailer, 91.5 cubic meters NEW vehicle, never used First registration 11/2025 Internal dimensions (L x W x H): 13,500 x 2,475 x 2,650 / 2,825 mm Axle spacing: 1,310 mm Unladen weight: 8,090 kg Saddle height: 1,150 to 1,180 mm Hodpfx Ajyih R Sjqtsr Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO trailer EBS with anti-roll system (RSS) WABCO Smartboard with axle load display 1st axle: lift axle >> 3rd axle: STEERABLE AXLE Air tank made of aluminum Tire size: 6x 385/65 R 22.5 Crank-operated saddle JOST full-load Lighting: ASPÖCK full-LED 4x LED work lights Toolbox at the rear left Side walls with profile overlaps, completely welded on the inside CARGOFLOOR sliding floor with 21 slats, material thickness 10 mm, ribbed Control with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel Side rails: 3 pieces, reinforced for waste transport Roof tarpaulin, reinforced Panama version, 900 g 12 pairs of lashing eyes in the floor Cleaning door in the front wall Rear crossbar can be folded, unlocked from below! Ideal for bale transport RENTING is the new BUYING, and with us, it is also immediately available with FULL-SERVICE rental.

Condition: used, empty load weight: 5,880 kg, maximum load weight: 30,120 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 10/2026, suspension: other, Year of construction: 2020, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, ABS/EBS Disc brake Air suspension Lift axle Aluminum tipper body WZK, platform Neutral 2x grain discharge slides Portal doors Pallet width Roll-over cover 6x polished aluminum rims German vehicle + documents Hodpfx Aqezlui Ijtjr Location: 02625 Bautzen ... Suspension: Air - Lift, used vehicle, incl. VAT.

Condition: new, roller (bottom) diameter: 56 mm, roller (top) diameter: 56 mm, roller diameter: 56 mm, sheet thickness steel (max.): 1 mm, - Capacity 1050 x 1 mm - Roll diameter 56 mm Hsdpfxor Ixphe Aqtjr - Conical roller - Swivel top roller - Documentation

Condition: used, empty load weight: 7,820 kg, maximum load weight: 28,180 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2027, loading space length: 13,513 mm, loading space width: 2,550 mm, loading space height: 2,641 mm, total length: 25,500 mm, total width: 39,960 mm, total height: 140,000 mm, suspension: air, tire size: 385/65 R 22,5, wheelbase: 7,850 mm, Year of construction: 2024, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, emission class: none, Axle manufacturer SAF, aluminum chassis, gray color, air suspension with lift function, raising and lowering capability, lift axle on axle 1 and 3, disc brakes, fixed side impact protection, toolbox, 2x LED reversing lights, 4 x LED reversing lights on the sides (2 each on the support wind deflector and 2 behind the axle assembly), 1 x LED spotlight in the cargo area, broom and shovel holder on the side impact protection on the left side, Cargofloor control type CF 500 SL-C - E"-CONTROL, 10mm ribbed surface with additional plastic guides below the floor profiles, wing doors (1/2 - 1/2 with door closure crossbar, remote control, impact protection for rear doors - aluminum impact buffer over the entire width of the rear wall, side posts and tarpaulin, maintenance flap on the left front, work platform with access ladder, roll tarp (PVC tarp, Panama quality 900g/m²), load securing certificate DIN EN 12642 Code XL, production, maintenance door, hydraulic hoses, 2x 3-chamber tail lights LED. Hedpezh Ransfx Aqtor

Condition: good (used), Included in the scope of delivery: 01x rail / track, used Rail profile: S41-10 Total length: approx. 3,000 mm Width: approx. 125 mm Height: approx. 140 mm Head: approx. 67 mm Web: approx. 12 mm Weight: approx. 120 kg / pc. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Hedpfx Aqoxg Rctotsr This item is offered for collection only. Any requested transport or shipment of this item will incur additional costs, which will be quoted separately depending on the place of delivery and scope – please contact us for further details.

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Equipment: ABS, New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Side tarpaulin can be retrofitted at an extra cost! Stas 91 m² sliding floor / 10 mm flat floor / TÜV cargo certificate ----* Manufacturer: Stas * Type: BIOSTAR - Sliding floor * First registration: - (New vehicle) * Color: Chassis galvanized, body RAL 7016 silver-grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50m long x 2.475m wide x 2.64m to 2.82m high) * Total weight: 36,000 kg * Unladen weight according to vehicle registration: 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1 lifting axle / starting aid / disc brake * Tires: 385/65 R22.5 New on Speedline Diamond aluminum rims * Wheelbase: 7.85m * Suspension: ECAS air suspension with lifting and lowering * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box at the rear left * 21 floorboards, 10mm flat * 12 pairs of recessed lashing eyes in the floor * End caps made of aluminum, welded * Complete discharge wall with brushes and stainless steel handles * Service door in the front wall * Double doors (50/50) with pneumatic locking * 2x twist locks for locking * Door closing crossbeam, swiveling * Hydraulic connections at the front with 3 m hoses and * Connection option below the body without hoses * Operating platform with ladder at the front left * Saddle height: 1150mm * Individual mudguards * Full load supports * Aluminum lighting protection at the rear (one-piece, foldable) * Roll tarp (900g/m²) with tension straps * Steel bars, foldable, and tension straps along the sides Hsdpfxjv Emk Ue Aqtor * 1x toolbox at the rear left * 1x aluminum ladder 3.80m long * Tire pressure gauge * Smartboard * TPMS tire pressure monitoring system * Aluminum bumper buffer at the rear * 1x extendable ladder at the rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at the rear * 1x LED work light in the front wall inside * 2 x 3-function lamps at the top in the door crossbar New vehicle in stock – available immediately! Buy, rent, or rent with an option to purchase! Note on possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the information. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, Westinghouse two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, Edbro hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, preparation for floor vibrator, mud-tight! FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ Transfer costs Hedju Dvw Eepfx Aqtsr *Pictures and offers are subject to change*

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Hodpefi Nmwjfx Aqtor Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Load area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes, each with a capacity of 10 t, 14 x stake pockets in the outer frame, 70 mm thick wooden floor, storage box with lid for lashing chains or tension straps, contour marking as per regulations, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, also available with a 9 m load area length + widening in stock. Surcharge for: aluminum ramps = price: €2,200, warning panels with lighting = price: €800. Subject to printing errors, errors and changes. Sample images. More details at: ! Hjdpfxozn Nzqe Aqter

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, also with 9 m loading area length + widening in stock , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Hedjznikrspfx Aqtjr

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 14 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, also with 9 m loading area length + widening in stock , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Hodpfxjzniibe Aqtsr

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Hjdoziizyjpfx Aqtjr Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: new, maximum load weight: 31,175 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,575 mm, loading space volume: 92 m³, Year of construction: 2026, Equipment: ABS, Stock number: 5742 THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! Kraker approx. 92 m³ moving floor trailer with 10mm Cargofloor floor / remote control / wear plates / pneumatic underride guard / rental also possible! ---- * Manufacturer: Kraker * Model: K-Force - Moving Floor * First registration: - (NEW VEHICLE) * Color: Body RAL 9010 / Chassis MicroZinq / Tarp SIO 7999 Black * Technically permissible total weight: 39,000 kg * Unladen weight according to manufacturer: 7,825 kg * Payload: 31,175 kg * Volume: approx. 92 m³ (13.53 m long x 2.48 m wide x 2.369m/2.782m high) * Axles: 3x SAF with 1st axle as lift axle and starting aid / disc brakes * Tyres: 385/65R 22.5 on steel rims * Suspension: Air suspension with lift and lower * EBS Wabco * Chassis: Microzinc * Rear wear plates 1,250 x 2,500 x 3 mm * Double-wing rear doors with pneumatic locking Hodpfx Aqjyawkxoter * Operator platform at the front with access on the left * Saddle height: 1150mm * Cargo Floor CF 500 Compact floor with 21 floorboards * Floor 10mm thick, ribbed, with aluminium end caps * Operation via remote control and control box at the left rear * Rolling tarp with central locking * Sliding wall (moveable partition) made of aluminium with drag sheet * 2 plastic track cleaners on the sliding carriage * Extendable access steps at the rear right * 4 x pivoting steel roof bows, 50mm round * 2 x round LED tail lights per side * 2 x LED work lights at support leg height * 2 x LED reversing lights mounted laterally behind the axles * Plastic toolbox at rear left * Holders for broom and shovel * 10-step ladder * Hydraulic hoses at the front approx. 3.5 m long * Single mudguards * Compressed air connection for cleaning gun * TPMS tire pressure monitoring system * Wabco Smartboard# AVAILABLE FOR RENT, PURCHASE, OR RENT WITH PURCHASE OPTION BY AGREEMENT! THE PHOTOS IN THE LISTING ARE SAMPLE IMAGES AND DO NOT 100% MATCH THE ACTUAL EQUIPMENT! Note on possible errors in the listing: Despite careful preparation of this listing, there may occasionally be errors in the text or details. We assume no liability for errors, changes, or prior sale. All information is supplied without guarantee. Please contact us to verify details or clarify any questions.

Condition: used, empty load weight: 6,640 kg, maximum load weight: 29,360 kg, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 11/2022, loading space length: 10,350 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 61 m³, total length: 10,350 mm, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: yellow, Year of construction: 2022, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41134 Kempf, SP 35/3 * Year of manufacture: 2022 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Alloy wheels * Air suspension * Lift axle * Neutral tarpaulin * Used tarpaulin * Portal door * Air connector coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Storage/toolbox * Platform * Sliding tarpaulin * Grain discharge chute * Radio remote control * Suspension: air * Gross weight: 36,000 kg * Curb weight: 6,640 kg * Payload: 29,360 kg * Permissible gross weight: 36,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 70% -- 70% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 50% -- 70% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 Hsdpfx Aqoyy H Nrstor * Internal dimensions: L=10,350 mm, W=2,460 mm, H=2,400 mm * Internal volume*: 61 m³ * Pallet spaces: 25 Disclaimer: Subject to change, prior sale, and errors excepted. You will find more pictures and videos on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Handling all (export) documentation * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Delivery/transfer of commercial vehicles Please contact our trained professional staff—we are happy to advise you.

Condition: used, mileage: 1,001 km, color: blue, driver cabin: other, gearing type: other, loading space volume: 10 m³, loading space length: 4,200 mm, loading space width: 2,360 mm, loading space height: 1,000 mm, Vehicle location: Bovenden, steel body, flap, Jet sidewalls. Body: Meiller tipper box approx. 10 cbm. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, interim sale and errors excepted! Hjdevhg D Topfx Aqtsr

Condition: new, color: white, driver cabin: other, gearing type: other, loading space volume: 10 m³, loading space length: 4,420 mm, loading space width: 2,410 mm, loading space height: 900 mm, Year of construction: 2022, Vehicle location: Bovenden, steel body, swing tailgates Body: 3-way tipper body approx. 10 m³, dismantled from MAN TGS 28.430 6x4-4 BL CH with 3600 mm wheelbase! Hedpfxowwtpts Aqter With hydraulic connections at the rear! ACCESSORIES DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, Year of construction: 1990, color: green, loading space volume: 10 m³, mileage: 1,001 km, first registration: 01/1990, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body Body: Asymmetrical roll-off container approx. 10/12 m³. The exact year of manufacture cannot be determined as the type plate is no longer present! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Hodoxqrfkjpfx Aqter

Condition: used, Year of construction: 1988, color: orange, empty load weight: 2,500 kg, mileage: 1,001 km, first registration: 01/1988, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Body: Tiek paper self-pressing container 380 V, approx. 10m³ both hydraulic rams overhauled approx. 20 hours ago ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hsdpfx Aqerfb Awetor - .

Condition: used, mileage: 1,100 km, gearing type: other, color: white, overall weight: 38,000 kg, empty load weight: 6,820 kg, maximum load weight: 31,180 kg, tire size: 425/65R22,5, first registration: 05/2013, suspension: air, loading space volume: 10 m³, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), U-protection, side aluminum driving protection Structure: KARRENA concrete mixer approx. 10m³, lifting axle 2x 10t BPW axles! Suitable hydraulics for engine output on the towing vehicle available for an additional charge! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Hjdpfx Asvy A H Ieqtsr