Used Soprem Rs-Hf 160 for sale (12,673)

Condition: excellent (used), functionality: fully functional, Year of construction: 1988, loading capacity: max. 3.000 Kg. table diameter: 1.600 mm strip metal width: max. 150 mm Podpfxstzwxws Al Nspu

Condition: good (used), Year of construction: 2003, functionality: fully functional, SOPREM Precision Coil Feeding Line (Decoiler + Straightener) — 2003. Complete matched feeding line for thin precision strip, ready to pair with a small high-speed stamping press. Decoiler — Type H1000.1000ZV. Max coil weight: 1000 kg. Coil Ø: 1000 mm outer / 375–520 mm inner. Reel speed: 2–20 rpm, 1.5 kW drive. Straightener — Type BR 19 . 160 . 12 . U . Strip capacity: up to 0.5 mm thick × 160 mm wide. Hydraulically driven precision straightening unit. Both units built 2003 · 400 V / 50 Hz · synchronized line with E-stop interlink to downstream press · Made in Switzerland. Technical Specifications Decoiler / Coil Reel (Haspel) H1000 / 1000ZV / 10M / LK.LF / N1 / G Serial No. (nameplate): 110103 Max coil weight: 1000 kg Coil outer Ø: max 1000 mm Coil inner Ø: 375–520 mm Podpjzav H Sefx Al Njpu Reel speed: 2–20 rpm Motor: KSMV 90L (4), 1.5 kW, 1400 rpm Gearbox: RMI 110 FL LCB, ratio i = 70 Slip clutch: set to 400 Nm Strip sensing: floor contact plate (loop control) Precision Band Straightener (Richtwerk) BR19.160.12.U Function: straightens coil curvature before the press Max strip thickness: 0.5 mm Max strip width: 160 mm Drive: hydraulically driven precision straightening unit Electrical Supply 400 VAC, 50 Hz, 3-phase + neutral + earth Rating: 25 A pre-fuse

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : Podoh Eyd Rspfx Al Nspu diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 Psdpfoi Dtb Ujx Al Nspu 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW Ppedpjd Sg I Iofx Al Nju 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: new, Year of construction: 2025, - Capacity 160 tons - Cylinder stroke 400 mm - Working width 1000 mm - Pressure gauge - Emergency stop Pedpfx Alsx Azghe Nopu - 400V

Condition: good (used), ZwickRoell Temperature Chamber for AllroundLine Model: TEE160/LN2 40S The TEE160/LN2 40S is a specialized temperature chamber designed primarily for material testing in combination with ZwickRoell testing machines (specifically the AllroundLine). Pedpfx Aozcpwpel Nspu Flexible Application ZwickRoell’s innovative temperature chamber ensures a flexible testing system tailored to customer needs—without compromise. This guarantees reliable test results well into the future. The safety door function ensures operator protection in compliance with European safety regulations. The chamber door serves as a safety door with an interlocking mechanism. Precise Temperature Control The temperature chamber creates extremely uniform and precise conditions for specimens throughout the entire chamber volume. This ensures accurate and repeatable test results. Key Specifications Temperature range: -40°C to +160°C. Cooling system: Liquid nitrogen (LN2) for rapid cooling rates. Temperature Chamber for AllroundLine Application: Specifically designed for integration into materials testing machines to perform mechanical tests (e.g., tensile or compression tests) under controlled environmental conditions. All panels in the door area (interior and exterior) are made of stainless steel. Dismountable heavy-duty base frame Dimensions: W x D x H = 1400 x 600 x 800 mm Chamber: W x D x H = 440 x 530 x 650 mm Test opening: 110 mm Power supply: 400/230 V, 16 A, 3N~, 50/60 Hz Cooling via LN2 (liquid nitrogen) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Year of construction: 1995, condition: excellent (used), REIFENHÄUSER RAM 160 PIPE HITCH - 6 Caterpillars Year of manufacture: Approx. 1990 Caterpillars: 6 Diameter: Min. 30 mm, Max. 160 mm Psdpowq E Etjfx Al Nepu Haul-off speed: 0.2 - 10 m/min With central chain lubrication Renewed gear motor and frequency converter With remote control and approx. 10 m cable Condition: Very good, ready for operation The haul-off is my property We speak Spanish We speak French We speak English Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Podpfx Aljza Hido Nopu Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Condition: new, For sale: professional gear motor from the renowned German company SEW EURODRIVE. The units come from warehouse stock – brand new, unused (warehouse surplus). They may show minor storage marks visible in the photos. Robust industrial construction designed for continuous operation in demanding applications. Gear motors are equipped with a helical gear and an electromagnetic brake (BMG), making them ideal for applications requiring precise stopping. Technical data: Manufacturer: SEW EURODRIVE Model: RF77 DT80N4/BMG/HF/ES1S Power: 0.75 kW Supply: 3~ 380–415 V (50 Hz) / 415–460 V (60 Hz) Speed: approx. 1368 / 1680 rpm Protection class: IP55 Brake: YES (BMG) Brake torque: 10 Nm Mounting: IM M4 Podpfx Aloyviw Rj Nspu Weight: approx. 58.9 kg Country of manufacture: Germany Condition: New – warehouse stock Never used Possible minor storage marks Fully operational Additional information: Price per unit

Condition: new, Schunk PZN+160 / 1 AS universal gripper 303514, unused, 100% functional, scope of delivery as per photos Pedpfx Aloulqk Is Nepu

Year of construction: 2013, condition: good (used), SICA-TRS-SY 25-160 R, PLANETARY TUBE SAW Application: Ppedjvn A R Njpfx Al Nsu Cutting and Chanfering of PVC, PE, PP PIPES With chip extraction fan Minimum diameter 25mm Max diameter 160mm Year of construction 2005 Machine locations: Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 The machine is my property.

Condition: good (used), functionality: fully functional, used motor cable YASKAWA 2BCHW0270816-09(HF)146963 Psdovpgn Uspfx Al Nspu

Condition: used, Winter service attachment for Piaggio / Pfau: - Pfau LBS 160 snow plow - Mounting bracket with electro-hydraulics, lifting cylinder and lighting Psdpfjuyhifjx Al Nepu - WITHOUT lower link / swivel cylinder Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, mileage: 1,000 km, power: 30 kW (40.79 HP), first registration: 01/2003, fuel type: diesel, empty load weight: 1,250 kg, maximum load weight: 10 kg, overall weight: 1,260 kg, axle configuration: 4x4, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Year of construction: 2003, Equipment: all wheel drive, * German appliance * Dücker wood chipper type HF 960 * Condition see photos * Drive via PTO shaft * Suitable for all Unimog, tractors and other municipal vehicles * Hydraulic feed via chains and gear wheels * Drive via the PTO shaft * Wood diameter up to 240 mm * Chipping capacity up to 20m³/hour * Throwing range of the chipper up to 10 m * Engine power 70KW * Working pressure 200 bar * Discharge rotat. - and height adjustable * Large hopper 100x75 cm * Weight approx. 1.250 kg. * When selling to tradesmen and for export (non-EU and EU), the German merchant rules apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Podpfxsvhp T Ro Al Nopu All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 243,779 km, power: 162 kW (220.26 HP), first registration: 07/2016, fuel type: diesel, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 5,180 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,460 mm, total width: 2,550 mm, loading space length: 7,050 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, differential lock, electric window regulation, traction control, = Additional Options and Accessories = - Air suspension - Radio - Rear view camera - Disc brakes - Sun visor = Notes = 4 seats as per registration document. = Additional Information = Tire size: 285/70R19.5 Brakes: Disc brakes Front axle: Steered; tire tread left: 40%; tire tread right: 40%; suspension: leaf spring suspension Rear axle: Dual tires; tire tread left (inside): 40%; tire tread left (outside): 40%; tire tread right (inside): 40%; tire tread right (outside): 40%; suspension: air suspension Ppodpfoy Nhzbsx Al Nju Number of cylinders: 6 Unladen weight: 6,665 kg Payload: 9,335 kg GVW: 16,000 kg Model number: EURO-CARGO 160-220 / LES / SCHOO = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the information provided in the texts.

Condition: ready for operation (used), Year of construction: 2014, ARO PAN 160 spot welding machine, including control cabinet and cooling unit -CE marking -Year of manufacture: 2014 -Welding power max. 328 kVA -Digital display & control cabinet / IBOX control system -Cooling unit / water-cooled -Ideal for spot welding of steel / aluminum / stainless steel / titanium -Electrode wear compensation -Modularity: The system allows the integration of different welding heads and electrode arms Ppsdpjy Umuqofx Al Nju -Foot switch Dimensions / Complete system L x W x H 2.5 x 2.5 x 1.8 meters / Weight approx. 1000 kg Errors and omissions excepted.

Condition: used, Year of construction: 2012, operating hours: 6,659 h, Equipment: all wheel drive, Stock no. 5798 Atlas 160 W Wheeled Excavator with Additional Hydraulic Circuit - Manufacturer: Atlas - Model: 160W - Wheeled Excavator - Year of manufacture: 2011 - Powershift transmission - Color: Orange - Tires: 10.00 - twin tires - Power: 105 kW / 143 hp - Deutz engine with 143 hp, water-cooled - Grapple E32, year 2019 - Indicated total operating hours: approx. 6,659 hours - Indicated hydraulic hours: approx. 2,243 hours - Hydraulic connections for breaker and shear - 301 l diesel tank - 180 l hydraulic oil tank - 32 l AdBlue tank - Air conditioning - Adjustable boom - 270-degree camera system - Rotating beacon - Maximum speed (km/h) - Work lights - Transport dimensions: 7.60m long x 3.15m high x 2.54m wide Note regarding possible errors in the listing: Despite meticulous preparation of this advertisement, occasional errors in the text or specifications may occur. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Pjdpey Sq Upofx Al Nspu Please contact us to verify details or if you have further questions.

Condition: used, power: 74 kW (100.61 HP), fuel type: diesel, color: white, first registration: 04/2017, Year of construction: 2017, operating hours: 3,233 h, Model year: 2017 Number of cylinders: 4 Unladen weight: 10,200 kg CE marking: yes TEREX TL 160 WHEEL LOADER HIGH-TIP BUCKET, BRAND RUHLE, GERMANY CENTRAL LUBRICATION SOLID RUBBER TYRES, 80% TREAD TYRE SIZE 7.5 R 25 ADDITIONAL HYDRAULIC FUNCTIONS ON LOADER ARM HOLMS HYDRAULIC BROOM WITH WATER TANK OPERATING HOURS: 3233 Pjdpfx Aoyymtwol Nspu MACHINE IN EXCELLENT CONDITION

Condition: used, Year of construction: 1969, press capacity 250 t spindle diameter 160 mm ram stroke range 180 mm stroke speed 71 Hub/min column daylight 450 mm table surface area 560x450 mm ram surface 450x400 mm total power requirement 12 kW weight of the machine ca. 9 t The tech. Data are manufacturer or operator information and therefore non- Ppodpsyt R Epefx Al Nju binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1990, Pallet decoiler, max. load 3,000 kg, power supply 380 V - 50 Hz, Pjdpfx Alexx R Ndj Nspu

Condition: used, functionality: fully functional, machine/vehicle number: 5430097, Year of construction: 2016, operating hours: 10,402 h, load capacity: 1,600 kg, lifting height: 9,000 mm, fuel type: electric, mast type: triplex, construction height: 3,750 mm, drive type: Elektro, Reach Truck Chassis Number: 5430097 Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Good Battery Voltage: 48V Battery Capacity: 620Ah Ppedpjyb Ummjfx Al Neu Description: For sale is a BT reach truck, model RRE 160. The machine is ready for immediate use and fully operational. Both the technical and visual condition are good. This truck is designed for professional use in high-bay warehouses and stands out due to its reliable technology and precise handling. The unit is equipped with a triplex mast offering a lifting height of 9,000 mm and a collapsed height of 3,750 mm. The rated load capacity is 1,600 kg. Year of manufacture: 2016. Operating hours: 10,402. The reach truck features reach forks for safe and efficient load handling and placement at great heights. The battery is included. A charger is not available, but can be provided upon request. The truck is available immediately. Fast and straightforward shipping can be arranged upon agreement. Subject to prior sale and errors excepted. Sale is made under exclusion of any warranty or guarantee. Side shifter, 3rd valve.

Condition: used, Power Chuck, SMW Power Chuck Type HFK S 160-45 Serial No. 085009 Outer diameter: 165 mm Inner diameter: 45 mm Threaded connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 7200 rpm Max. clamping force: 3000 daN Jaw seating: 1/16" x 90° serration Total jaw width, serration with keyway: 35 mm Keyway width in serration: 17 mm Ppodpoxcbnfjfx Al Nju - Jaw seating with precision ground serration - 3 pcs. soft top jaws - 6 pcs. T-nuts with mounting screws Chuck weight: 13 kg Good condition

Year of construction: 1971, condition: used, pressure 160 t throat 440 mm stroke 20 - 120 mm table surface area 1050 x 750 mm no. of strokes 42 u. 62 Hub/min ram surface 800 x 500 mm tool shank hole (depth x diameter) 85 x 50 mm hole in the table 355 mm daylight (stroke down, ram adjustment above) 455 mm ram adjustment 100 mm weight of the machine ca. 11,2 t Podocyc Adopfx Al Nepu

Condition: used, Year of construction: 2021, operating hours: 4,995 h, functionality: unexamined, overall weight: 2,210 kg, fuel type: diesel, tank capacity: 450 l, power: 121 kW (164.51 HP), output frequency: 50 Hz, nominal power (apparent): 160 kVA, Himoinsa HFW-160 T5 Year of manufacture: 2021 Operating hours: 4,995 Power: 121 kW Fuel: Diesel Rated speed: 1,500 Podpfx Alow A Iixs Njpu Tank capacity: 450 l (own oil line possible) Turbo needs to be repaired! Only used in seasonal operation.