Used Sml Type: Cc/135,60,60/2700/600 for sale (44,701)

Year of construction: 2007, condition: good (used), Extruder "A" 135/33 L/D • Output max. LLDPE 950 kg/h Extruder "B" 60/28 L/D • Output max. VLDPE 200 kg/h Extruder "C" 60/28 L/D • Output max. LLDPE 200 kg/h Raw materials: LLDPE MFI 2 - 5 g/10min Kedjqk T Dijpfx Ampjlr VLDPE MFI 2 - 5 g/10min Coex Structure 3 layer Film thickness range for stretch wrap film 11 - 45 μm Final film width 4 x 500 mm // 8 x 250 mm // 2 x 750mm + 1 x 500mm // 2 x 750 mm + 2 x 250mm • Flat die lip width 2.550 mm • Roller width 2.700 mm • Chill roll C1 Ø 1.000 mm • Chill roll C2 Ø 400 mm • Mechanical speed max. 600 m/min • Installed electrical power for one line approx. 1.022 kW • Utilisation factor approx. 40 - 50 % of total value • Necessary cooling capacity approx. 492 kW approx. 422.882 kcal/h • Compressed air consumption approx. 60 Nm³/h

Condition: used, all stainless steel belt width 600 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump Klsdpfxsy Dqwzo Ampjr

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Kledsy Alm Ispfx Ampor Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: used, continuous teflon belt grill Kjdpeyzyl Nofx Ampolr suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A Kodpfx Aeyzyi Ismpolr dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: used, cooking length 4.000 mm belt width 600 mm all stainless steel with electrical hoist steam heated (steam generator not included) temperature distribution in 2 zones dimensions (l x w x h) : ± 5.000 x 1.550 x 2.200 mm adjustable speed Klsdpoyy Nr Ajfx Ampjr

Condition: used, continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm Ksdpjyylvqofx Ampolr electrically heated ± 90 kW belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

Condition: used, all stainless steel belt width 600 mm Kledpoyx Tlqjfx Ampor mobile adjustable speed adjustable working height with air knife outside dimensions (l x w x h) : ± 3.400 x 1.300 x 1.900 mm

Condition: used, FlowCook all stainless steel Kodpfx Ajyxnflempjlr suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: used, all stainless steel nett belt length 4.500 mm nett belt width 600 mm overall dimensions (l x w x h) : ± 7.400 x 1.900 x 3.150 mm Klodpjyvzhbofx Ampjr suitable for thermic oil heating (= 214 kW) with top hold down belt adjustable speed sediment removal system electrical hoists

Condition: used, Comprehensively tested and refurbished, used Morton-Lödige model FKM600 stainless steel jacketed ploughshare type mixer. Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Kljdpfx Ameykn Sbepor Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted).

Condition: good (used), Year of construction: 2001, Distance between centres: 600 mm Centre height: 180 mm Max. grinding diameter: 355 mm Min/max Z-axis feed rate: 0.01 / 15 m/min Z-axis resolution: 0.5 µm Min/max X-axis feed rate: 0.01 / 10 m/min X-axis resolution: 0.5 µm Grinding wheel left side: 500 x 40 x 203 mm Kjdpfxey Dz R So Ampolr Peripheral speed of grinding wheel: 45 m/sec External grinding spindle drive power: 10 kW Workpiece spindle speed: 0-1000 rpm Workpiece headstock taper: MK 5 Tailstock centre taper: MK 4 Cylindricity adjustment: +10 / -4 degrees CNC control: SIEMENS 840 D Total connected load: 28 kW Machine weight: 5.2 t

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm Kjdeyr Ev Tspfx Ampslr

Condition: used, Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotation. Mill is equipped with electric cabinet, belt cover and set of screens (6 pcs). Kedpfjyhc N Ajx Ampslr Specifications: Horsepower: 75 kW Material Of Construction: Stainless steel Number Of Hammers/Row: 96 hammers / 24 rows Type: "U" type hammers

Condition: used, Year of construction: 1987, Dematic belt conveyor Rising falling Incline with arch GF 2700-600-500 RA2372 Technical data: Conveyor length (NL): 2700 mm (2700 mm incline + 700 mm arch) frame width (NB): 600 mm belt width (GuB): 500 mm Overall height (BH): 1400 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Kjdpfev Ezw Asx Ampolr Side guide on one side and on both sides Frequency converter for stepless speed controll Refurbishment possible Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), functionality: fully functional, The Treif Felix Type 2700 dicer is a high-performance solution for cutting food products into cubes or strips, whether it’s meat, cheese, or even plant-based items. Engineered to meet the demands of rigorous industrial environments, it ensures consistent, high-quality cuts—crucial for portion uniformity. Thanks to its cross-cutting technology, it transforms raw materials with remarkable precision while minimizing waste. Additionally, its compact design allows for easy integration into any production line, even where space is limited. The Treif Felix 2700 also stands out for its intuitive handling, significantly reducing operator training times and simplifying daily use. The cutting grids can be changed quickly, enabling smooth transitions between different product formats. Furthermore, its stainless steel construction guarantees impeccable hygiene, which is essential in the food processing industry. Cleaning is simplified by quick access to key components, thereby reducing downtime caused by maintenance. Its robust mechanical design allows for reliable operation, even under intensive use. Ultimately, choosing the Treif Felix 2700 dicer means choosing consistency, performance, and precise control over every cut. Please contact us for a quote or to arrange a technical demonstration of this essential machine. Technical specifications: • Hourly capacity: up to 900 kg/h • Cutting size: from 3 to 40 mm Kjdpfsw Su Hzox Ampjlr • Dimensions: 950 x 600 x 980 mm • Motor: 1 kW, three-phase • Weight: approx. 148 kg

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 192378-16-001, total length: 6,000 mm, total width: 2,400 mm, total height: 2,750 mm, overall weight: 6,000 kg, Equipment: type plate available, Contact Oven "Hitec", type BG 600-3600 E continuous grilling line All stainless steel Klodewxvqpspfx Ampsr with lower and upper belt: lower and upper heating Belt temperature adjustable separately Mesh length: 3,600 mm Belt width: 600 mm Electrically heated 136 kW Belt washing system Temperature range from 50 to 260°C Adjustable speed Dimensions (L x W x H): approx. 6,000 x 2,400 x 2,750 mm year: 2021 Condition: Like new

Condition: new, Year of construction: 2025, pressing force: 2,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,500 mm, retraction force: 600 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 2000/600 Klodpfx Aox N Ukvsmpjr H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Gib Design General Description The CRONOSSTECH CHSP Series H-type hydraulic deep drawing presses are engineered for heavy-duty deep drawing applications that require extremely high tonnage, large table dimensions, and controlled blank holder force. Thanks to its 8-gib H-frame construction, ram and table movements are carried out under high rigidity throughout the pressing cycle, maintaining strict parallelism and perpendicularity tolerances even across long strokes. The CHSP 2000/600 model offers high precision and repeatability in large-volume die, deep drawing, and stamping operations with its 2000-ton main ram and 600-ton blank holder capacity. Its stress-relieved, steel-welded frame structure is designed for longevity and reliability under heavy industrial conditions. ⚙️ Standard Features • Steel-welded construction, 8-gib H-frame press body • Stress-relieved frame through vibration methods • Zr14 bronze gib bushings • WPQR and WPS certified welding by TÜRK-AK accredited standards (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen panel • Adjustable ram and blank holder stroke controls • Adjustable tonnage (pressure) control for ram and blank holder • Automatic lubrication system • Electronic hydraulic filter contamination warning • On-screen monitoring of hydraulic oil temperature and system status • Offline filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety systems for operator protection 📐 Technical Specifications – CHSP 2000/600 Type: Steel-welded, 8-gib H-frame press body Frame Material: St52 – ERDEMİR Gib Bushings: Zr14 bronze Capacity (Ram / Blank Holder): 2000 / 600 tons Moving / Fixed Table: 1500 × 2500 mm Parallelism / Perpendicularity: 120 / 60 microns/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight (Min / Max): 200 / 1200 mm Max. Working Pressure: 250 bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø720 mm – Ck45 (2 pcs) Blank Holder Cylinder: Ø390 mm – Ck45 (2 pcs) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 105 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 600 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 200 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. The 8-guideway H-frame structure provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the extended stroke length. Model CHSP 600/200, featuring a 600-ton main ram and a 200-ton blankholder (cushion) capacity, is designed to ensure full control over the die and component during high-tonnage deep drawing and spinning operations. The frame structure is stress-relieved by vibration for durable and reliable performance. ⚙️ Standard Equipment - Welded steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK-accredited procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing to CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter clogging warning - On-screen display of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications — CHSP 600/200 - Type: Welded steel, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR grade - Slide Bearings: Bronze Zr14 - Capacity (Ram): 600 tons - Capacity (Cushion): 200 tons - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 1000 mm - Cushion Stroke: 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Weld Stress Relief: By vibration - Welding: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1:2017), supervised by certified “welding coordination engineers” (EN ISO 14731) - Max. Working Pressure: 250 bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Advance Speed: 30 mm/s Kodpfsx N Uhzsx Ampjlr - Main Cylinder Bore: Ø550 mm – Ck45 - Cushion Cylinder Bore: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 5900 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2300 mm - Lower Table Height from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Scale: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Screen: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approx. Weight: 35 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 600 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial machines developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guide H-frame structure ensures an even distribution of the high forces generated during pressing, providing long-lasting and stable operation. The CHP 600 model is designed to deliver reliable performance for production processes requiring high tonnage. CHP Series – Structural Features The CHP series presses are engineered for demanding heavy-duty conditions. The frame and supporting components are stress-relieved by vibration. Bronze Zr14 guide bushings provide smooth load distribution and high precision during ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Vibratory stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 600 - Type: Steel construction, 8-guide H-frame press - Frame Material: St52 – ERDEMİR - Guide Bushings: Bronze Zr14 - Capacity (Ram): 600 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm Kljdpfsx N T Iaox Ampjr - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Min. Clearance: 100 mm - Max. Clearance: 900 mm - Stress Relief: Vibration stress-relief - Welding Application: WPQR and WPS certified welding by TÜRK-AK accreditation with EN ISO 15614-1/2017 certificate (supervised by welding coordination engineers certified per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Rapid Descent Speed: 150 mm/s - Moving Table Forming Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Main Cylinder Inner Diameter: Ø550 mm – Ck45 - Die Cylinder Inner Diameter: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approximate Press Height: 5900 mm - Approximate Press Width: 3250 mm - Approximate Press Depth: 2300 mm - Distance from Floor to Lower Table: 1400 mm - Pre-filling Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Displacement Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Screen: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 28 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 600 t, stroke length: 200 mm, table width: 1,200 mm, table length: 2,200 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are a type of mechanical press driven by force generated via an eccentric mechanism, and are commonly used for cold forming operations such as punching, cutting, and forming. H type (straight-side) eccentric presses provide high stability and process safety in applications requiring large die tables and heavy-duty tooling, thanks to their rigid frame design. The CRONOSSTECH CEHP 600 – H Type Eccentric Press 600 Ton is engineered for stable operation in high-volume production, prioritizing die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it ensures reliable performance under continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/tooling protection provided by hydraulic overload protection system - Precise guidance with 8-point ram and balancer piston - Controlled and user-friendly operation with PLC and touchscreen interface - High operator safety via light curtain protection system Application Areas - Punching/cutting/forming applications requiring large tables - Mass production with automated feed lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on the ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric safety guard) • Enclosed oil reservoir with gear unit • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems Kodpsx N R A Uofx Ampslr • Scrap discharge systems • Sliding safety cover at table front • Custom-specification dies ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Capacity: 600 Ton Table–Ram Distance: 500 mm Housing Width: 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Size: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (fixed): 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ PRODUCTION / PROCUREMENT NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator with belt wash system suitable for CIP-cleaning Klodpfxoy Emtus Ampsr suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: used, suitable for nitrogen all stainless steel belt width ± 600 mm Kljdsy Ddavjpfx Ampsr nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: used, all stainless steel nett width 450 mm Kedey Dc U Espfx Ampelr length: 1.800 mm infeed height: 1.350 mm 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard Kjdpsy Dc Uxjfx Ampjlr 18 kW