Used Schweißkraft Srf Profi for sale (1,491)

Condition: used, Year of construction: 2022, Technical data: Process: 2-stage Filter surface area: approx. 17 m² Separation efficiency: >99% Welding fume separation class: W3 Extraction capacity: 1100 m³/h Extraction arm diameter: 150 mm Extraction arm length: 3 m Power supply: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (approx.): 785 x 730 x 950 mm Weight (approx.): 106 kg Features: - Made in Germany - Suitable for low to medium amounts of smoke/dust - Suitable for occasional to frequent use - Convenient filter replacement via service door - Extraction hood rotatable and pivotable by 360 degrees Equipment: Hodpoxbflrsfx Aagsnl - 3 new replacement main filters (approx. €330 each, new) - 7 new replacement pre-filters - 2 extraction hoods (one unused)

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Hnsdpfxsdqzbrs Aagjl Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Hnsdpedqzcvjfx Aagjl Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Year of construction: 2019, condition: excellent (used), Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator Overband plate magnet Execution in VA 1.4301 tightly welded SrFe strontium ferrite magnetic core, deep magnetic field! Dimensions: 620x520x200mm 4 - piece M16 eyebolts on the back This lifting magnet was used by one of our customers as a "police magnet" in the meat processing industry. Hsdpfx Aaehuphvjgonl The price mentioned refers to 1 piece. Currently only 1 piece available from stock! All information without guarantee, only while stocks last! Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Execution in VA 1.4301 tightly welded 420x420x200mm 420x420x250mm 620x420x200mm 620x520x200mm 820x520x200mm 820x520x250mm Completely welded stainless steel housing to protect the magnetic core Ring eyelets for hanging Cleaning drawer for easy removal of accumulated impurities. Installation above all conveyor systems possible...

Condition: excellent (used), Year of construction: 2002, functionality: unexamined, Woodworking centre Homag PROFI BOF 411/45/PM. Used condition. Hnedpfxoydqx Re Aagol

Condition: used, Year of construction: 2025, total length: 1,450 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 970 kg Price: On request Movable Press-Cylinder - Year: 2025 - Documentation available: Yes Hsdew N Su Djpfx Aagenl - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1500 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 1100 - Height adjustment [mm]: 750 - Motor power: 3.0kW - Transport dimensions: 1450mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,100 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 260 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Motor power: 2.2kW - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hnodpfx Aasw N St Hogol VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hodpfxjxixrue Aagenl Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 Hedpoxixrhofx Aagenl - Drive system: Conventional - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 155 - Capacity diameter round [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), For sale: Original J.D. Neuhaus PROFI pneumatic hoist, model LN-1T, with a lifting capacity of 250 kg (0.25 t). Manufactured in Germany in 1991 by J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – a global leader in pneumatic lifting systems. Technical specifications: • Model: PROFI LN-1T • Lifting capacity: 250 kg (0.25 t) Hnedpfxextfnwe Aagol • Year of manufacture: 1991 • Power supply: 6 bar compressed air • Air consumption: approx. 3–4 m³/min • Chain: steel 5 x 15 mm, DIN 5684-8 standard • Controls: dual-lever (up/down) • Weight: approx. 35 kg Condition: • Used, fully functional. • Complete set including hook, control valve, and chain bag. • Normal signs of use, with no mechanical damage. Applications: Suitable for lifting tools, components, and parts in workshops, assembly lines, industrial plants, and ATEX zones (depending on version). JDN construction ensures reliability and durability – made in Germany, commonly used in the aerospace, petrochemical, and automotive industries.

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, plate length: 2,200 mm, plate width: 1,000 mm, stack height: 1,600 mm, Equipment: CE marking, TECHNICAL DETAILS Max. panel length: 2,200 mm Max. panel width: 1,000 mm Max. stacking height of panels: 1,600 mm Hodpfxeyxnn Tj Aagenl Number of stations: 2 MACHINE DETAILS Control system: WINDOWS EQUIPMENT CE marking Panel stacking station Station discharge System suction cups Vacuum pump The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at its destination. External reference: 7997

Condition: new, Year of construction: 2026, ZGR-3640/0.8 Hjdpfx Aascka N Uegonl Warrenty: 12 months Certificate CE Eccentric pressure that is transferred to both sides of the machine Working length: 3640mm to the plate thickness of 0,8 mm STEEL SHEET 0,8 mm TITAN-ZINC-PLATE 0,8 mm, ALUMINIUM SHEET 1,2 mm , COPPER PLATE 0.8 mm, NIRO-SHEET 0,5 mm , Bending beam: 24 mm Bending angle: 145 degrees Cutting in the whole working length, Lift the upper beam in three layers, maximum width between the beams 80 mm rear frame for holding sheet, weight: 650 Kg Shears - with regulation of scissors guide and the rolls, which are made of high-alloy steel of very high resistance to wear. This allows cutting of sheet metal over a very long period without sharping the rotary shear. The performance of the rotary shear is about 40km sheet with a thickness of 0.5 mm - up to the first sharpening. The shears can be sharpened on average 35 times. The rotary shear weighs about 6.5 Kg. The price of this item does not include VAT. For invoice, we need the active VAT No. We provide VAT invoices from the tax rate of 0%. If you wish to order private, you should contact us.

Condition: new, Year of construction: 2025, All roof bending machines from PROD-MASZ are valued not only by customers from Germany, but also from all over the world. Thanks to the fact that we have been manufacturing and supplying machines that meet individual requirements for years, we have established ourselves as the market leader for bending machines in Europe and worldwide. Every roofing machine we supply has a strong and durable construction, it is manufactured to the best standards. Bending beam only 15mm RED 3200 / 0.8mm Hnedpfsb Eg Nkjx Aagel Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Bending beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg Roller shears + 350 Euro The front depth stops and rear frame are also included in the price. Bending from 3 sides -ᐳ cutouts laterally 60mm / 45 ° recess Price: 5100.00 EUR Delivery date: every week We are looking forward to your contact! Invoices are issued either with 0% as intra-Community delivery.

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: 8100404, Our showroom demonstration model is for sale. It comes without electrode holder and ground clamp. New cables are available upon request for an additional charge. Welding Power Easy-Stick 410 SET Adjustment range: 30 – 400 A Duty cycle at maximum current at 40°C: 60% Duty cycle at 100% duty cycle at 40°C: 310 A Fuse protection: 32 A Line voltage: 3 x 400 V Line voltage tolerance: -10 – +15% Line frequency: 50/60 Hz Open circuit voltage: 66 V Power consumption: 13 kVA Standard: EN 60974-10 Protection class: IP 21 Insulation class: H Marking: CE, S Operating temperature: -10 – +40 °C Weight: 24 kg Length x width x height: 618 x 330 x 441 mm Hjdpov T Tx Isfx Aagenl

Condition: new, Year of construction: 2025, Folding bench bending machine with cutouts in cheeks, with the possibility to finish bending window sills on three sides. Cutouts from 6 cm up and 6 cm down. This modern press brake has a lot of space inside and a narrow 15 mm bending beam. The offered bending machine Red 2700 / 1.0 is an alternative to the segment bending machine for less complex work. We get this possibility thanks to the construction with special cutouts. This machine performs bending operations from the top up and down. The strengths of this bending machine include high performance while maintaining the precision and repeatability of the machining. Intended for processing steel, aluminum and other sheet metal. This folding bench is extremely functional. RED 2700 / 1.0mm Technical specifications: - maximum working width: 2580 mm - Bending performance: up to 1.0 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 160 degrees - The cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop up to 90 degrees rear frame for holding the sheet front depth stops - Weight: approx. 490 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Hedpfx Aasb H Ac Iegjnl Delivery time: 2-4 days We issue the invoices with 0% (intra-community delivery) We are looking forward to your contact!

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 441, functionality: fully functional, pressing force: 28 t, throat depth: 220 mm, overall weight: 3,600 kg, working width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Pressing force: 28 t Max. working width: 1,000 mm Column gap: 950 mm Throat depth: 220 mm Back gauge depth: 415 mm Hodpfjy Rxy Djx Aagjnl MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,150 x 2,400 mm Weight: 3,600 kg Transport packages: 1 Power: 3.0 kW EQUIPMENT CE marking Documentation

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Back gauge travel range: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Support tables: 200 x 275 mm Throat depth: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing stroke: 8-10 mm/s Return: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Hjdpfxjy Rry Do Aagjnl Total weight: 3,500 kg EQUIPMENT Operating manual

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 9,000 mm, conveyor belt width: 600 mm, total length: 10,000 mm, Equipment: emergency stop, type plate available, The machine is fully operational and has recently undergone maintenance. It is designed for high-capacity professional kitchens and intensive use. Key features: Conveyor (flight-type) dishwashing system Three speed settings for adjustable throughput Separate zones for: Pre-wash Main wash Rinse Hjdpox Hbtxofx Aagonl Drying chamber Buffer / waiting zones of 50 cm between each washing section, ensuring optimal separation and performance High pressure wash Drying tunnel with heat recovery, using heat from hot-water-filled pipes to reduce energy consumption Very energy-efficient in electrical consumption Heat exchanger for efficient heating of the watertanks Additional information: Boiler not included Suitable for large-scale catering, professional kitchens, institutions, and event operations Condition: Used – in good working condition

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 178 mm, turning diameter over bed slide: 300 mm, center height: 178 mm, center width: 914 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,700 mm, total width: 750 mm, total height: 1,270 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, quill mount: MK 3, incl. 3-axis position display Hodpfx Aasy Iy H Hegjnl incl. RÖHM lathe chuck incl. quick-change toolholder 'set', Multifix system for further details see data sheet ELMAG warranty: 3 years (upon online registration after purchase) Delivery throughout Germany: FREE OF CHARGE NOT THE RIGHT MACHINE? WE ARE AN ELMAG AUTHORIZED PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE ELMAG RANGE! REQUEST A QUOTE!

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1 x Reich GmbH stainless-steel fixed table bandsaw for cutting typically used for cutting meat. Supplied with several spare parts and new blades. Model - Profi 400. Serial number - 400 1141. Date of manufacture - 2005. Size of blade - 3204mm x 16mm. Electrical requirements - 400 V / 50 hz / 3 phase. Hjdpfxoyzxd Rj Aagenl

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,8 x 1,8 x 1,6 m Hedpjy N D Nbsfx Aagenl

Condition: new, functionality: fully functional, color: orange, overall weight: 72 kg, Year of construction: 2026, Equipment: hydraulics, The TEC-POINT Hydraulic Breaker KT40 in Top Type-S configuration is the professional solution for demolition, concrete breaking, foundation work, civil engineering, sewer construction, landscaping, and compact job site applications with mini and compact excavators. Thanks to its robust construction, compact size, and reliable impact performance, the KT40 is ideally suited for daily use on construction sites. The top-mounted design ensures efficient power transmission and excellent operating reach when breaking concrete, stone, foundations, and similar materials. ✅ Complete set for mini and compact excavators from 0.8 to 2.5 tons 📍 Available immediately from stock in Rheda-Wiedenbrück 🚚 Local pickup or Europe-wide shipping via freight forwarding available 💶 Price: €1,200 net plus statutory VAT – negotiable 🧾 Invoice with VAT shown will be issued 🛠️ Complete set including 2 pointed chisels, nitrogen bottle, hydraulic hose set, service case – ready for immediate use! ⚙️ Technical Data 🔹 Model: KT40 Top Mount S 🔹 Configuration: Top Type-S / straight design 🔹 Suitable for carrier weight: 0.8 to 2.5 tons 🔹 Weight: 72 kg 🔹 Operating pressure: 90–120 kg/cm² / approx. 88–118 bar 🔹 Required oil flow: 15–30 l/min 🔹 Impact frequency: 800–1400 blows per minute 🔩 Mounting dimensions / Compatibility 🔹 Mounting width: 92 mm 🔹 Pin center distance: 90 mm 🔹 Pins/Bore: Ø 25 mm 🔹 Chisel diameter: 40 mm We would be pleased to check the appropriate mounting for your excavator model and coordinate it individually upon request. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Germany 📞 Contact & Inspection Feel free to contact us today – we will advise you personally and help you choose the suitable hydraulic breaker for your carrier unit. We warmly invite you to visit our warehouse in Rheda-Wiedenbrück. On site, you may view, compare, and, by arrangement, test our machines and attachments. Hedpoy N R Azefx Aagsnl We look forward to your inquiry!

Condition: excellent (used), functionality: fully functional, Single-sided edge processing line HOMAG with feed speed up to 32 m/min, precise workpiece positioning with a rolling block chain (instead of standard chain), extended mechanization, fully automatic workpiece infeed WZ14, with belt sanding unit for solid wood edges. Comprises: Hodewvlhlopfx Aagsnl Edgebanding and sizing machine HOMAG, type: PROFI KFL350/13/A3/WZ Loading station / infeed table HOMAG POWER TBL100/30/30/S Return system / BOOMERANG LIGMATECH, type: ZHR 30/L/185/F

Condition: used, empty load weight: 6,400 kg, maximum load weight: 23,600 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 7,800 mm, loading space width: 2,500 mm, loading space height: 920 mm, suspension: steel, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: inbound / in transit, 3 axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, hydraulic ramps, rear support, side aluminum underrun protection, twin tires Body: 3-axle low-bed trailer with hydraulic loading ramps, galvanized ramps, 3x 10t axles! All information provided without guarantee as the vehicle is inbound! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Hsdpfx Aasy R Ekiogjnl

Condition: new, functionality: fully functional, overall weight: 129 kg, Year of construction: 2026, Equipment: hydraulics, low noise, The TEC-POINT KT45S hydraulic breaker in silenced design is the professional solution for demolition work, concrete breaking, foundation jobs, civil engineering, pipeline construction, landscaping, municipal worksites, urban operations, and jobs in noise-sensitive environments. The fully enclosed housing reduces noise emissions and protects the internal components. The replaceable upper swivel mount ensures flexible attachment options, while the long overall length provides high reach and efficient power transmission. ✅ Complete package for mini and compact excavators from 1.2 to 3.0 tons ✅ Brand new / unused unit 📍 Immediately available from stock in Rheda-Wiedenbrück 🚚 Collection on site or Europe-wide shipping via freight carrier possible 💶 Price: €1,699 net plus VAT 🧾 Invoice with VAT shown will be issued 🛠️ Complete set including 2 pointed chisels, nitrogen cylinder, hydraulic hose kit, service case – Ready for immediate use! ⚙️ Technical Specifications: 🔹 Model: KT45 Silenced Type 🔹 Version: noise-insulated design 🔹 Suitable for excavator operating weight: 1.2 to 3.0 tons 🔹 Weight: 129 kg 🔹 Operating pressure: 90–120 kg/cm² 🔹 Required oil flow: 20–40 l/min 🔹 Impact rate: 700–1200 blows per minute 🔩 Connection dimensions / Compatibility: 🔹 Mounting width: 97 mm 🔹 Pin center distance: 92 mm 🔹 Pins / Bore diameter: Ø 30 mm 🔹 Chisel diameter: 45 mm Upon request, the corresponding mounting bracket can be tailored to your excavator model. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Germany 📞 Contact & Inspection Please feel free to contact us today – we will provide you with personal advice and assist you in selecting the suitable hydraulic breaker for your carrier machine. You are warmly invited to visit our warehouse in Rheda-Wiedenbrück. On site, you can view, compare, and test our machines and attachments by appointment. Hsdpfx Aaey Ny Igogenl We look forward to your inquiry!