Used Schrack Reactive Power Compensation Equipmen for sale (37,227)

Year of construction: 2005, condition: good (used), Schrack 300 kvar Reactive power compensation equipment Manufacturer: Schrack Energietechnik Iodpfx Aok D Dxbsagoat Type: KRSMO-P-TS-25/12 Fi 7% Nominal power: 300 kvar Rated voltage: 400 V Nominal frequency: 50 Hz Rated current: 432 A Reactive power control relay: Frako RM9612 Rittal electrical switch cabinet: Freestanding with built-in fan. Manufacturer: Rittal Type: TS8806 Dimensions: 610x830x2000 mm

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 220 kg, total length: 610 mm, total height: 2,000 mm, total width: 805 mm, input voltage: 400 V, control cabinet height: 2,000 mm, control cabinet length: 610 mm, control cabinet width: 805 mm, input frequency: 50 Hz, control voltage: 230 V, protection type (IP code): IP20, We are offering this used Eskap ESR-7000 (-S485) power factor correction system, 100 kvar, year of manufacture 2022. Ready-to-connect, regulated power factor correction system for the automatic compensation of reactive power, ESKAP modular design in accordance with IEC / DIN EN 61439-1 and -2, IEC / DIN EN 60831-1 and -2 and DIN EN 61921. Rated voltage: 230 / 400 Volts, 50 Hz Rated power: 100 kvar, step power: 25 kvar Configuration: 2 x 25 – 50 kvar, expandable in the same cabinet up to max. 200 kvar Modules spaced approx. 100 mm apart Contactors with pre-charging resistors for damping inrush current peaks Group protection with NH fuse-switch disconnectors MKP three-phase capacitors with discharge resistors, UN = 525 Volt 7% detuned to protect against ripple control frequencies > 228 Hz Reactors with high linearity, temperature monitoring Temperature class T40/B, insulation class F 12-step four-quadrant controller with self-adaptation Ventilation via ball-bearing roof fans Permissible ambient temperature: -10°C to +35°C (24h average), +40°C (short-term max) ESKAP floor-standing cabinet, dimensions 2000 x 805 x 610 mm (H x W x D) Protection class 1, IP20, color: RAL 7035 Cable entry from below, door hinge right, weight approx. 220 kg Iaedpfeyiryyex Aagst If you have any questions or need further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1999, A low-voltage reactive power compensation system Bausatz for improving the power factor is available. Controller: BLR-CB, total reactive power: 300kVar, number of stages: 6, stage rating: 50kVar, rated current: 433A, degree of protection: IP20. In 2007, 16 power capacitors were replaced in the system. Documentation available. An on-site inspection is possible. Iasdpfxey Eg D To Aaget

Condition: used, Year of construction: 2021, operating hours: 6,670 h, machine/vehicle number: 241431, fuel type: diesel, power: 129 kW (175.39 HP), motor manufacturer: Iveco, Field of application: Construction Empty weight: 2.150 kg Generator capacity: 143 kVA Iaodpfetr Iw Hex Aaget Transport dimensions (LxWxH): 2.99x1.1x1.5 Please contact PFEIFER GROUP for more information

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow ATC nozzle changer and integrated extraction/filter system Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Professional dismantling by PRIMA Power in June 2025 Ijdpewv U N Sjfx Aageat Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works On request, we are happy to provide you with tailored leasing or financing offers. Pictures of the machine in dismantled condition can be found at the end of the listing. Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,550 kg, fuel type: diesel, color: yellow, power: 80 kW (108.77 HP), output current: 144 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, HELVETICA POWER offers: 100 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Ijdpfx Aasmw Unkogsat Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,003 h, This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information. Additional information • Punching Force: 300 kN • Shearing Force: 250 kN • Various spare parts • Weight: 22000 kg Isdpfex D H Dbsx Aagsat • Optional: Sheet Metal Storage: 40 pallets, 3000 x 1500 x 150 mm

Condition: ready for operation (used), Year of construction: 2010, overall weight: 23,000 kg, punching force: 31 t, controller manufacturer: SIEMENS, sheet thickness (max.): 6 mm, number of axes: 11, This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details. • Max. punching diameter: approx. 88.9 mm (in 3 mm steel) • Punching speed: up to 600 hpm (short pitch) • Positioning accuracy: ±0.1 mm • Max. sheet size: 1500 x 2500 mm • Automatic repositioning: yes, via CNC clamps • Number of clamps: 2 (with intelligent repositioning) • Loading/unloading capability: manual or automatic (configuration dependent) • Turret: Thick Turret / Trumpf style • Number of stations: 20 • Integrated shear: CNC right-angle shear • Shearing capacity: up to 6 mm (mild steel) • Process advantage: part separation without micro-joints or secondary operations Iajdpfx Aaey H Iluoget • Edge quality: superior to traditional nibbling • Control unit: Finn-Power / Siemens • Software: NC Express / Tulus • Functions: automatic nesting; optimized punching and shearing sequences • Diagnostics: self-diagnostics and assisted maintenance

Condition: ready for operation (used), Year of construction: 2007, punching force: 31 t, total height: 2,200 mm, total width: 5,165 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D CNC, product length (max.): 5,570 mm, number of axes: 2, This 3s Finn-Power C5 + Compact Express CNC punching machine was manufactured in 2007. It features a working area of 2500 × 1250 mm and a punching force of 30 tonnes. With 20 tool stations and a maximum tool diameter of ~89 mm, it offers efficient operation. Consider the opportunity to buy this Finn-Power C5 + Compact Express CNC punching machine. Contact us for further details. • Maximum sheet thickness (steel): 8 mm • Number of tool stations: 20 • Maximum tool diameter: ~89 mm • Table clamps: 3 (typically pneumatic) • Sheet weight capacity: ~200 kg • Traverse speeds: X ~90 m/min; Y ~60 m/min • Table support: vacuum or brush table Additional equipment • Automatic loading/unloading system (automatic material handling, loaders/unloaders) Iasdpfxoyiz Ige Aagot • Chip/slug conveyor belt

Condition: good (used), Year of construction: 2000, Parts from Prima Power Rapido 5 Iajdpfsw Shzxox Aaget Laser source Touch control P9000L / Primach 900L 3D laser head spare parts and manuals

Condition: excellent (used), Year of construction: 2019, fuel type: electric, color: blue, Weights Empty weight: 500 kg Functional Lifting capacity: 200 kg Working height: 450 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Isdpjxcuabofx Aageat Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Transport dimensions (LxWxH): 1,5x0,73 Additional information Please contact Sales Department Collé Sittard for more information

Condition: excellent (used), I am offering a professional industrial extraction unit / industrial vacuum cleaner from the renowned German brand AL-KO, model POWER UNIT APU 100. Iasdpfxjyxtf Ro Aagjt This unit is designed for extracting dust and contaminants in an industrial environment – ideal for workshops, carpentries, and manufacturing plants. The equipment is in very good technical condition and ready for immediate use. ⚙️ Technical Specifications - Manufacturer: AL-KO (Germany) - Model: POWER UNIT APU 100 - Year of manufacture: 2021 - Power supply: 400V / 50Hz (3-phase) - Motor power: 1.5 kW - Airflow: approx. 865 m³/h - Negative pressure: 2124 Pa - Connection diameter: 100 mm - Speed: 2896 rpm - Protection class: IP54 - Weight: approx. 116 kg ✅ Technical Condition - Complete device - Fully functional, ready for operation - Very good visual condition - No mechanical damage - Used – normal signs of use 📦 Included in the set - AL-KO POWER UNIT APU 100 extraction unit - Complete set as shown in the photos - Documentation (user manual) 🏭 Typical Applications - Carpentry workshops and wood processing plants - Production and workshop environments - Dust and chip extraction - Dust extraction systems

Condition: good (used), functionality: fully functional, Year of construction: 2000, Equipment: CE marking, PLS2500 2D laser with 2 x cutting table with usable area: 3140 x 1640 x h100mm, Axis stroke 3000x1500x150mm (XYZ), Iedpfx Aajxx R A Dogjat Maximum speed linear axes 40m/min (XY) and 20m/min (Z), Neck LGL France type NLEX 35, Sideros Engineering dust extraction system 3000W CO2 laser source DOCUMENTATION AVAILABLE. Machine dismantled and prepared for loading. It was in perfect working condition. Special price for immediate purchase.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 5 h, load capacity: 30,000 kg, fuel type: electric, power: 0.8 kW (1.09 HP), Power Attack towing device for heavy-duty transport trolleys/tank rollers up to 30 tons/30,000 kg PowerAttack MTC 30 CC Cordless 0 - 20 m/min (forward and reverse drive) 24V three-phase motor (3,000 rpm) Iaedpfx Aasy D Ea Regjt Operating time: 4h Charging time: 5h Length: 1650 mm 2-stage telescopic lever arm, each step 250 mm, maximum length 2150 mm Track width: 380 mm Weight: 70 kg Scope of delivery includes a charger with 2 batteries, each with 22.5 Ah capacity. Operating duration approx. 4 hours. Charging time approx. 5 hours. Includes the accessories shown in the picture. NEW PRICE As new condition – see pictures Pick-up only by appointment in 75053 Gondelsheim Shipping via freight forwarder possible; please inquire with your ZIP code.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 19,670 h, controller model: PRIMACH 20L, laser power: 4,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 150 mm Working area: 3,000 x 1,500 mm Laser source: CP 4000 Isdsy D Icuspfx Aageat Laser power: 4,000 W MACHINE DETAILS Control model: PRIMACH 20L EQUIPMENT Extraction system

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Isdpfx Aajywwrfogeat Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Iajdpfxoxfiw Te Aagot Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, Diesel Generator Set 150 kVA Generator Type: P150SSF Condition: New, 2026 Application: stationary Engine: Perkins 1106A-70TG2 Alternator: Leroy Somer LSA 44.3 L12 Power Output: 150 kVA / 120 kW Nominal Voltage: 230/400 V Nominal Frequency: 50 Hz Speed Regulation: electronic Voltage Regulation: electronic (AVR D350) Soundproofed (approx. 72 dB/7m), weatherproof Incl. control panel Control voltage: 12VDC Network type: TN-C Incl. control panel Incl. batteries (2 x 110Ah) Incl. integrated fuel tank (500 L) Incl. integrated drip tray for fuel and engine fluids Incl. documentation/manual Incl. circuit breaker (ABB, 4P) Dimensions: 365x125x200 cm (LxWxH) Dry weight: 3280 kg Optional: Automatic transfer switch package – emergency power supply Socket outlet kits Iajdpfeffwlqox Aaget GSM-based remote control Contact us, we will be happy to advise you. Please send all inquiries about our offers BY EMAIL first and leave your contact details; we will respond as soon as possible.

Condition: new, Year of construction: 2026, overall weight: 3,900 kg, fuel type: diesel, tank capacity: 600 l, color: dark red, power: 2,000 kW (2,719.24 HP), output current: 360 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 200 kW (271.92 HP), nominal power (apparent): 250 kVA, continuous power: 200 kW (271.92 HP), continuous power (apparent): 250 kVA, total length: 4,000 mm, total width: 1,450 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Diesel Generator Set 250 kVA Aggregate Type: P250SSF Condition: New, 2026 Engine: Perkins 1206A-E70TAG2 Generator: Leroy Somer LSA 46.3 M7 Rated Power (Standby Power/ESP): 275 kVA/ 220 kW Rated Power (Prime/PRP): 250 kVA/ 200 kW Iasdsfxlddepfx Aagot Rated Power (Continuous/COP): 200 kVA/ 160 kW Rated Voltage: 230/400 V Rated Frequency: 50 Hz Control Voltage: 12VDC Speed Regulation: Electronic Voltage Regulation: Electronic (AVR) Sound insulated, weatherproof Network System: TN-C Includes control panel Includes batteries (2 x 110Ah) Includes integrated fuel tank (600 L) Includes integrated bund for fuel and engine fluids Includes circuit breaker (ABB, 4P) Includes documentation/manual Includes wiring diagram Warranty: 12 months or 2,000 operating hours, whichever comes first. You can configure your generator individually with us and order various customization options: - Socket package 16A – 125A with residual current device (all-current sensitive) - Remote control - Insulation monitoring - Enhanced sound insulation (down to 65 dB/7 m possible) - Fully automatic standby power system with automatic mains-generator transfer available on request - Grid parallel operation with load sharing and peak load (ComAP IG 1000 controller, VDE 4510 certified) - CHP configuration - Emergency power unit version for indoor installation with air ducts, ventilation, etc. Made in Germany Nationwide delivery available at extra cost. Contact us via email or call us – we’ll be happy to advise you and provide a non-binding quote.

Condition: good (used), Year of construction: 2012, The Prima Power Platino FIBER is in good condition, one owner, always serviced on time by Prima Power service representatives. For sale complete with storage. All documentation, service reports are included. Recently serviced with a full annual service. Laser cutting machine is connected, available for inspection, testing, in Ukmergė. Specification: Model. Serial No.: 776 E 308 Year of manufacture: 2012 Made in: Italia Power: Working area (X x Y): Weight: Laser working hours: 61484 Cuts up to: 5 mm Location: Ukmergė Available for testing: Yes If you have any further questions, we will be happy to answer them. Iasdpfxeqi D Sqo Aaget

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 5,600,000 kW (7,613,872.00 HP), continuous power (apparent): 700,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. Iodpfx Aaerdzg Hsgeat The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures.

Year of construction: 2008, condition: ready for operation (used), This Finn-Power LP 8 turret punch press was manufactured in 2008. It features a maximum punching force of 30 tons and a punching working area of 1500 × 3000 mm. The machine includes a threading/tapping unit capable of mounting 6 taps up to M8 and a versatile tool turret. Consider the opportunity to buy this Finn-Power LP 8 turret punch press. Contact us for further details. • Max punching force: 30 tons • Max sheet loading size: 1500 × 4000 mm • Max sheet unloading size: 1500 × 4000 mm • Punching working area: 1500 × 3000 mm Iodpfxoyh I Ibj Aagoat • Laser working area: 1500 × 2500 mm • Threading/tapping unit in turret: up to 6 taps, max M8 • Tool turret configuration: • 1 × Multitool 8/24 • 2 × Multitool 8/16 • 5 index stations • 1 forming station for forming operations • Unloading flaps: 2 for single parts (front and side)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,924 h, laser power: 3,000 W, travel distance Z-axis: 150 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information. • Working area (X × Y): 3000 × 1500 mm • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm Iedsx D Nyxspfx Aagoat • Drive system: CNC-controlled with brushless servo motors • Control unit: Prima Power CNC Touch Interface • Cooling: Water-cooled • Fume extraction system: Integrated • Total operating hours: 18,924 h Additional equipment • Automatic pallet changer

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,610 kg, fuel type: diesel, color: yellow, power: 100 kW (135.96 HP), output current: 180 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 100 kW (135.96 HP), nominal power (apparent): 125 kVA, continuous power: 100 kW (135.96 HP), continuous power (apparent): 125 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, emission class: euro5, Equipment: AdBlue, HELVETICA POWER offers: 125 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. With Oil- and water Heater. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Isdpfxeyvktaj Aagjat Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany.

Condition: new, Year of construction: 2025, functionality: fully functional, type of cooling: air, total width: 540 mm, total length: 920 mm, total height: 760 mm, fuel: diesel, overall weight: 159 kg, continuous power (apparent): 9 kVA, continuous power: 7 kW (9.52 HP), rotational speed (max.): 3,000 rpm, warranty duration: 12 months, noise level: 71 dB, power: 8 kW (10.88 HP), nominal power: 7.7 kW (10.47 HP), nominal power (apparent): 9 kVA, fuel type: diesel, color: yellow, output voltage: 400 V, output current: 13 A, output frequency: 50 Hz, type of output current: three-phase, Electric starter generator. The generator is available from stock in Kefikon (Switzerland) and Konstanz (Germany). Other models in various sizes (10 kW, 15 kW, 20 kW, and up to 100 kW) are available from stock, including those with STAGEV engines. Ijdpfemu N Tksx Aageat Service available in Switzerland and throughout Europe. Pickup. Delivery worldwide possible. Dealer inquiries welcome – contact us!