Used Schmid Energy Solutions Utsl-150T for sale (6,592)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Serial - 1013. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ Cgsdjxd Ubnopfx Agfou No printer.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Csdsvf E Avjpfx Agfegu Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Beam focus diameter: 80 - 115 µm Cgjdpfx Agsza Ethjfou Max. scanning speed: 10 m/s Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station PRS unpacking station Laser class 1 CE marking present Service / Usage history From the beginning, the system was used exclusively for processing aluminum and operated under a nitrogen atmosphere. Operation was reliable until decommissioning. As part of the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel chiller WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition according to images. Scope of delivery as shown in the pictures. A complete technical functional test under production conditions has not been carried out by us. Inspection and testing on site are possible and expressly desired after consultation. Loading can be organized after consultation. All information is provided to the best of our knowledge based on available documents, manufacturer's data, delivery note and nameplates. Deviations in technical data are possible. Errors, changes and prior sale are reserved.

Year of construction: 2012, condition: used, Max. Saw blade diameter: 530 mm Cutting capacity 90° Round 180mm, Square 170mm, Rectangular 380x70m Cutting capacity 45° left Round 180mm, Square 150mm; Rectangular 290x70mm Cgedpfx Aezabmqsgfsu Cutting capacity 45° right Round 180mm, Square 150mm; Rectangle 290x70mm Digital grade display for the saw table Cutting table swing range 180° Spray device 2-Hand-Bedienung

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage ----- Technical data ----- Cutting height: 60 mm, Voltage: 230 V Csdpfx Ageu R S I Hofogu

Condition: used, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 410 mm, control type: CNC control, 1 used band saw automatic machine Manufacturer: Berg & Schmid Model: X Tech 410 Technical specifications: - Cutting range: round 410 mm or flat 410 x 410 mm - Modern 2-axis CNC control - Band run monitoring with automatic feed adjustment - Automatic cut-in for the first cut, minimum remnant length 15 mm - Infinitely variable, frequency-controlled saw drive - Clamping pressure regulation for thin-walled tubes and profiles - Hydraulically driven chip conveyor - Automatic double-sided saw band lift-off device - Hydraulic saw band tensioning - Material feed via precision ball screw and linear guide Drive power: 5.5 kW Working height: 730 mm Paint finish: platinum grey RAL 7036 and turquoise RAL 5018 Cgsdpfx Agjytvqqjfou

Condition: used, Year of construction: 2023, Rated capacity 4,1 kW Cgodpoynmnvefx Agfou current intensivity 7,2 A temperature max. 65,8 °C operating pressure max. 42 bar temperature (Water): max. 35 °C operating pressure (Water): max. 6 bar Ambinent temperature -5 / +43 °C weight of the machine ca. 143 kg dimensions of the machine ca. 1,3 x 0,6 x 0,8 m Chiller ICS COOL ENERGY - IC 220 - Refrigerant R410A

Condition: excellent (used), Year of construction: 2011, Details Manufacturer: Berg & Schmid. Model: GBS250 Super AutoCut. Year of manufacture: 2011. Condition: in excellent working order. Cutting capacity Round materials (90°): Ø 250 mm Square materials (90°): 230 x 230 mm Round materials (45°): ± 210–220 mm Cjdpfxoy U Dyks Agfjgu Round materials (60°): ± 160–170 mm Saw blade length: ± 3,000 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Mitre angle & position Left mitre angle: 0–60° Right mitre angle: 0–45° Hydraulic saw arm with adjustable cutting pressure Dimensions Length: approx. 1500 mm. Width: approx. 1700 mm. Height: approx. 1800 mm. Weight: approx. 500 kg.

Condition: used, Height: 410 cm Lifting capacity: 1.200 kg Working height: 410 cm Supply voltage: 24 V The measuring trolley consists of: * Jungheinrich EJC 112 trolley * Mounting adapter * Storage cabinets for PC, batteries and accessories * Touch screen Cgsdsy U H Rrjpfx Agfou * Hydraulic lock Application: quality control and 3D measurement of parts. Mounted on electric pallet truck Brand: Jungheinrich Type: EJC 212 Year of construction: 2021 CE conformity: yes Lifting capacity: 1.200 kg Working height: 4100 mm Load center distance: 600 mm Battery voltage: 24 V Driving power: 1.6 kW Net weight (without battery): 839 kg Including 2 transport trolleys on rail Capacity: 8000 kg Dimensions: 2250x1800 mm Rail length: 17 m Auction by tender of the production line of KSK GmbH at Schwerte (DE). The site was active within component production for the mobile crane industry and specialized in the production of heavy, welded steel components and long-form structural parts. Among the products processed within KSK were high strength steel grades such as S690QL, S960QL, S1100QL and S1300QL. The online auction opens Wednesday 6 May and closes Tuesday 9 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-30B-SA, overall weight: 785 kg, fuel type: diesel, tank capacity: 100 l, color: green, power: 30.16 kW (41.01 HP), output current: 44 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 26 kW (35.35 HP), nominal power (apparent): 33 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 30 kVA, total length: 1,800 mm, total width: 850 mm, total height: 1,275 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Baudouin, type of cooling: water, In stock at Agregaat.store/Van Delft Staal, ENERGY dealer. ENERGY INDUSTRIAL GENERATOR SET MODEL EY-30B-SA, 30 kVA PRP, 33 kVA LTP, 400/230 V THREE-PHASE, 50 Hz, 1500 RPM. CONFIGURATION: DIESEL ENGINE BAUDOUIN 4M06G35/5 LINZ ALTERNATOR PRO18S C/4 WITH AVR WEATHER- AND SOUND-PROOF GREEN HOUSING RAL6017. ROOF, BASE FRAME AND PANELS GRAY RAL7012. AUTOMATIC MAINS FAILURE PANEL (AMF), DEEPSEA DSE4520 CONTROL PANEL, BATTERY CHARGER AND SOCKET SET: 1 x CEE 400V 5P 63A 1 x CEE 400V 5P 16A 1 x CEE 230V 3P 16A 1 x SCHUKO 230V CIRCUIT BREAKER FOR EACH SOCKET GENERAL DIFFERENTIAL CIRCUIT BREAKER TYPE "A" QUICK CONNECTION FOR ATS Cgodey S T Tbjpfx Agfju OPTIONAL ATS CONTROL CABINET Ready for start-up 1-year warranty

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-33Y-SA, overall weight: 1,000 kg, fuel type: diesel, tank capacity: 120 l, color: green, power: 32.07 kW (43.60 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 29 kW (39.43 HP), nominal power (apparent): 36 kVA, continuous power: 26.4 kW (35.89 HP), continuous power (apparent): 33 kVA, total length: 2,400 mm, total width: 924 mm, total height: 1,490 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, In stock at AGGREGAAT.STORE/VAN DELFT STAAL Dealer of ENERGY Power for life INDUSTRIAL GENERATOR SET MODEL EY-33Y-SA, 33 kVA PRP, 36.3 kVA LTP, 400/230 V THREE-PHASE, 50 Hz, 1500 RPM. CONFIGURATION: - DIESEL ENGINE YANMAR 4TNV98C-IYE (STAGE V) - LINZ ALTERNATOR MODEL PRO18M D/4 C WITH AVR - WEATHER- AND SOUND-PROOF HOUSING, GREEN RAL6017. ROOF, BASE FRAME AND PANELS, GREY RAL7012. AUTOMATIC PANEL (AMF) WITH BATTERY CHARGER AND COMAP AMF8 CONTROL BOARD, WITH SOCKET SET: Cgodoy S T Aiopfx Agfeu - 1 x CEE 400V 5P 63A - 1 x CEE 400V 5P 16A - 1 x CEE 230V 3P 16A - 1 x SCHUKO 230V - MAGNETOTHERMAL SWITCH FOR EACH SOCKET If in stock, our items can be collected directly from our location in Nieuwkuijk. Would you prefer to have your items delivered? No problem! We deliver throughout the Netherlands. As a family-owned business, we value personal contact. We offer short communication lines, a customer-focused approach, and tailored advice. Since our establishment in 1975, we have been continuously expanding our business and are characterized by: More than 50 years of experience In stock! 1 year warranty Also for all your maintenance and repair needs.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EY-50F-SA, overall weight: 1,000 kg, fuel type: diesel, tank capacity: 100 l, color: green, power: 44.87 kW (61.01 HP), output current: 72 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 40 kW (54.38 HP), nominal power (apparent): 55 kVA, continuous power: 44 kW (59.82 HP), continuous power (apparent): 50 kVA, total length: 2,000 mm, total width: 850 mm, total height: 1,275 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Iveco FPT, type of cooling: water, Energy Generator EY-50KF-SA – a powerful Stage V diesel generator Dealer of ENERGY Power for life The Energy FPT Iveco diesel generator EY-50KF-SA is a reliable 50 kVA diesel generator that meets Stage V emission standards. This robust generator delivers stable power, making it ideal for construction sites, industry, and emergency power supply. Thanks to its fuel-efficient engine and noise-reducing housing, it combines performance with comfort and durability. The EY-50KF-SA is easy to maintain and designed for long-term use under demanding conditions. With its wear-resistant components and advanced protection technologies, it offers maximum operational reliability and low fuel consumption. Key features: Power: 50 kVA / 40 kW Cgjdpfey S Txdex Agfeu The automatic voltage regulator is usually referred to by the abbreviation A.V.R., which stands for Automatic Voltage Regulator. Engine: Stage V certified diesel engine 1500 rpm Noise level: low due to silent enclosure Application: construction, industry, emergency power, or events We ensure that all generators are ready to start and operate. In stock at Aggregaat.store/Van Delft Staal

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 320 kg, fuel type: diesel, tank capacity: 30 l, color: green, output current: 39 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 9.9 kW (13.46 HP), nominal power (apparent): 13 kVA, continuous power: 10 kW (13.60 HP), continuous power (apparent): 11 kVA, total length: 1,360 mm, total width: 650 mm, total height: 980 mm, rotational speed (max.): 3,000 rpm, motor manufacturer: China, type of cooling: water, Energy Generator T1200FULL Dealer of ENERGY Power for life The Energy 13.2 kVA Generator T12000FULL diesel generator is available for sale at Van Delft Staal / Aggregaat.store, designed to provide a stable power supply during any power outage. The T12000FULL is equipped with AVR technology (Automatic Voltage Regulation), ensuring the voltage remains constant at all times, making it ideal for connecting sensitive equipment. An optional ATS (Automatic Transfer Switch) is also available for off-grid systems and automatic switching during power outages. This diesel generator operates quietly, efficiently, and is built for long-term reliability, exactly what you would expect from Van Delft Staal/Aggregaat.store. Key advantages: Power: 13.2 kVA / 10.6 kW Power: 9.9 kVA / 7.9 kW Sockets: 230V-16A and 400V-32A Cgjdpfx Agsy S Tq Tjfou 3000 rpm AVR system for stable voltage Predisposition for ATS: Prepared for ATS (Automatic Transfer Switch). This means the unit is already wired or equipped with the necessary connections to install an external switch. Quiet, fuel-efficient, and easy to maintain Perfect as a generator during power outages. We ensure all generators are ready to start and operate. In stock.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-R33Y, overall weight: 1,275 kg, fuel type: diesel, tank capacity: 315 l, color: green, power: 32.07 kW (43.60 HP), output current: 47 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 29 kW (39.43 HP), nominal power (apparent): 36 kVA, continuous power: 26.4 kW (35.89 HP), continuous power (apparent): 33 kVA, total length: 2,550 mm, total width: 1,037 mm, total height: 1,605 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, Energy Generator EY-R20K – Rental Version The robust Energy Generator EY-R33Y is a powerful 33 kVA Yanmar diesel generator, available for purchase at Aggregaat.store/Van Delft Staal, designed for construction sites to provide a stable power supply even during power outages. Thanks to its modern Yanmar diesel engine, this generator offers minimal emissions and optimal fuel consumption. The EY-R33Y is equipped with AVR technology (Automatic Voltage Regulation), ensuring that the voltage remains constant at all times, making it ideal for connecting sensitive equipment. This diesel generator operates quietly, efficiently, and is built for long-term reliability – exactly what you would expect from Aggregaat.store/Van Delft Staal, a dealer of ENERGY Pure Power. Key benefits: Power: 20 kVA / 16 kW PRP Power: 22 kVA / 17.6 kW LTP Powerful 1500 rpm AVR system for stable voltage Quiet, fuel-efficient, and easy to maintain ATS preparation, plug, and optional ATS control panel Perfect as a generator during power outages or as a mobile power source We also provide all maintenance and repair services. We ensure all generators are ready to start and operate. Csdpsy S Tnxofx Agfogu In stock. Aggregaat.store/Van Delft Staal – your partner for reliable energy, wherever and whenever you need it.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-R20K, overall weight: 780 kg, fuel type: diesel, tank capacity: 130 l, color: green, power: 18.02 kW (24.50 HP), output current: 29 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 17.6 kW (23.93 HP), nominal power (apparent): 22 kVA, continuous power: 16 kW (21.75 HP), continuous power (apparent): 20 kVA, total length: 1,875 mm, total width: 880 mm, total height: 1,170 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Kohler, type of cooling: water, Energy Generator EY-R20K – Rental Version The robust Energy Generator EY-R20K is a powerful 20 kVA Kohler diesel generator, available for purchase from Van Delft Staal, designed for use on construction sites and providing a stable power supply during any power outage. Thanks to its modern Kohler diesel engine, this generator features minimal emissions and optimal fuel consumption. The EY-R20K is equipped with AVR technology (Automatic Voltage Regulation), which ensures a consistently stable voltage, making it ideal for connecting sensitive equipment. This diesel generator operates quietly and efficiently and is built for long-term reliability – exactly what you would expect from Aggregaat.store/Van Delft Staal, your ENERGY Pure Power dealer. Key benefits: Power: 20 kVA / 16 kW PRP Power: 22 kVA / 17.6 kW LTP Powerful 1500 rpm AVR system for stable voltage ATS preparation, plug, and optional ATS control panel Quiet, fuel-efficient, and easy to maintain Perfect as a generator during power outages or as a mobile power supply We also handle all your maintenance and repair needs. We ensure all generators are ready to start and operate. In stock. Aggregaat.store/Van Delft Staal – your partner for reliable energy, wherever and whenever you need it. Codpey S Tkyjfx Agfegu

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-30Y-SA Yanmar, overall weight: 890 kg, fuel type: diesel, tank capacity: 90 l, color: green, power: 30.16 kW (41.01 HP), output current: 43 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 26 kW (35.35 HP), nominal power (apparent): 33 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 30 kVA, total length: 2,000 mm, total width: 850 mm, total height: 1,275 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, Aggregaat.store/Van Delft Staal, Dealer of ENERGY Power for Life Generator set for industrial use, model EY-30Y-SA Electrical power 30 kVA, 24 kW PRP; 33 kVA, 26.4 kW LTP, 400/230 V three-phase, 50 Hz, 1500 rpm. Configuration: Diesel engine Yanmar 4TNV98-IGECS (Stage IIIA) Automatic Voltage Regulator (AVR) Design with weather- and sound-proof enclosure, fuel tank, fuel leak protection tray, and muffler (sound level 70 dB +/- 3 at 7 meters) Automatic Mains Failure (AMF) panel with complete power connection box, circuit breaker, battery charger, and electronic circuit board. Without automatic transfer switch (ATS). EY-30Y-SA - Datasheet Set with 4 sockets + residual current device (RCD) for generator sets from 30 kVA to 45 kVA Set with 4 sockets + residual current device (RCD) for industrial series generator sets from 30 kVA to 45 kVA KIT 4 PRESE (30-45kVA) - Datasheet Socket kit including (standard version): - 1 x CEE 400V 5P 63A - 1 x CEE 400V 5P 16A - 1 x CEE 230V 3P 16A - 1 x Schuko 230V - Circuit breaker for each socket - General residual current device (RCD) ATS automatic transfer switch for an off-grid system, and automatic switching during power outages. ATS 45A model ATS-31, ATS connector ATS 45A three-phase, 23kVA to 31kVA If in stock, our items can be picked up directly from our location in Nieuwkuijk. Would you prefer to have your items delivered? That is possible! We deliver throughout the Netherlands. As a family-owned business, we value personal contact. Short lines of communication, a customer-focused approach, and appropriate advice. Since our founding in 1975, we have been working on further expanding our company, and we are characterized by: More than 50 years of experience Personal advice for your projects Large stock with fast delivery times We ensure that all generators are ready to start and operate. Cgodpfx Ajy S Th Ssgfju 1 year warranty.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EY-14P-SA Perkins, overall weight: 425 kg, fuel type: diesel, tank capacity: 55 l, color: green, power: 11.84 kW (16.10 HP), output current: 19 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.4 kW (15.50 HP), nominal power (apparent): 14 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,580 mm, total width: 700 mm, total height: 1,050 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, additional equipment features: Perkins, Energy EY-14P-SA Perkins diesel generator. The Energy Generator EY-14P-SA is a robust 13 kVA Perkins diesel generator from Aggragaat.store/Van Delft Staal, perfect for use during power outages, construction projects, or as an emergency power supply. This modern Perkins diesel generator provides stable power with low fuel consumption. Thanks to the integrated AVR technology (Automatic Voltage Regulation), the voltage remains constant, which is essential for the safe use of sensitive electrical equipment. The EY-14P-SA combines power, silence, and durability in one compact solution. Electrical Power: 13kVA, 10.4kW PRP; 14.3kVA, 11.4kW LTP, 400/230V three-phase, 50Hz, 1500 rpm. Configuration: Diesel engine: Perkins 403A-15G1 (non-emission); Alternator with automatic voltage regulation (AVR); Version with weather and soundproof canopy RAL 9010 (light grey); Fuel leakage protection basin and residential muffler (noise level 70dB +/- 3 at 7 meters); Automatic mains failure panel (AMF) with full power terminal box, magnetothermic switch, battery charger, and electronic board. Advantages of the EY-14P-SA: Cgsdpfoy S Tdmsx Agfou Power: 13 kVA / 10.4 kW PRP Power: 14.3 kVA / 11.4 kW LTP Clean and efficient 1500 rpm AVR system for constant voltage Low-noise, easy-to-maintain diesel engine Ideal as a generator during power outages or as a mobile power source Color: RAL 6017, bottom side dark grey RAL 7012 Optional plug unit 400V 32A, 63A, and 220V 16A, additional cost: €500. Also available for all your maintenance and repair needs. In stock.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EY-S30Y-SA, overall weight: 1,600 kg, fuel type: diesel, tank capacity: 250 l, color: green, power: 30.3 kW (41.20 HP), output current: 43 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 24 kW (32.63 HP), nominal power (apparent): 26 kVA, continuous power: 24 kW (32.63 HP), continuous power (apparent): 33 kVA, total length: 2,400 mm, total width: 1,220 mm, total height: 2,100 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, Energy Generator EY-S30Y Stage IIIA For sale, in stock! The Energy Generator EY-S30Y is a powerful kVA Yanmar diesel generator and is available for purchase at Van Aggregaat.store/Delft Staal, designed to provide a stable power supply during any power outage. Thanks to the modern Yanmar Stage IIIA diesel engine, this generator meets the strictest emission standards, with minimal emissions and optimal fuel consumption. The EY-S30Y is equipped with AVR technology (Automatic Voltage Regulation), which ensures that the voltage remains constant at all times, ideal for connecting sensitive equipment. This diesel generator operates quietly, efficiently, and is built for long-term reliability, exactly what you would expect from Van Delft Staal. Benefits at a glance: Power: 30 kVA / 24 kW PRP Power: 33 kVA / 26.4 kW LTP Socket unit 400V - 16A - 63A and 230V - 16A Stage IIIA emission standard – environmentally friendly and powerful Cjdpfxjy S S Svo Agfegu AVR system for stable voltage ATS socket and ATS control system 1500 RPM Super silent 50db, very quiet! Economical and easy to maintain Perfect as a generator during power outages or for mobile power supply Also for all your maintenance and repairs. In stock. We ensure that all generators are ready to start and operate. Price €15,500,- excluding VAT, including VAT €18,755,- Aggregaat.store/Van Delft Staal, your partner in reliable energy, wherever and whenever you need it.

Condition: like new (used), Year of construction: 2022, operating hours: 1,496 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, type of input current: AC, overall weight: 3,600 kg, power: 30 kW (40.79 HP), input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, 5-axis CNC lathe "DN Solutions model LYNX 2100LMSA" with sub-spindle, driven tools and CNC FANUC i-PLUS iHMI complete with "TOP model FUSION" bar loader. Cedpfxstq Aylj Agfjgu

Condition: used, Year of construction: 1997, bar material dia. 8 - 52 mm bar length 3200 mm number of bars 6 / ø 52 mm Cjdsvh Nc Ejpfx Agfsgu oil volume 150 l weight 700 kg total power requirement 0,75 kW

Condition: used, Year of construction: 2001, bar material dia. 8 - 52 mm bar length 3200 mm number of bars 6 / ø 52 mm oil volume 150 l weight 700 kg Csdpfevh Nclex Agfegu total power requirement 0,75 kW

Condition: used, Technical details: Cgedpfx Aeu N A D Aogfsu stroke: 45 mm dayligth: 205 mm throat: 92 mm Pressing power: ca. 2 kN table-size: 120 x 160 mm distance between table / ram: max. 205 mm dimensions L x W x H: 0,24 x 0,17 x 0,8 m Total weight, approx.: 23 kg The height of the plunger can be adjusted by loosening the Allen screws to 140 mm using the hand crank. Plunger holder Ø 10mm with return spring Base with 2x clamping hole Ø 12mm *

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction Cgsdpfx Ageu Nilyefsu max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel *

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D SL, overall weight: 21,000 kg, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 80, number of axes: 5, This 5-axis SCHMID SE 368 horizontal machining centre was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control, rapid traverse rates of 75/40/90 m/min in X/Y/Z, and a shuttle table. Equipped with dual NC rotary swivelling units, a 30-fold tool changer, and HSK-A63 tool holder. Max speed is 10,000 rpm. Includes a chip conveyor and recooling system. A great opportunity to buy this SCHMID SE 368 horizontal machining centre. Contact us for further details regarding this horizontal machining centre. Additional equipment • Double spindle • Shuttle table • 2x 2 NC rotary swivelling units • Switch cabinet system • Chip conveyor Knoll 600K-1 2019 • Hydraulic unit • Filter system • Recooling system Lahntechnik KOF1803-100 2020 • Number of tool magazine positions: 2x 30 • Rotary table (NC / hydraulic clamping) : n x 360o, vertical axis, Machine Benefits Technical Machine Benefits • Ibag three-phase main drive : s1-100% 40 kw / s6-40% 52 kw Cgjdeyyuwwjpfx Agfou • Key performance data working spindle kw s1 : 3 12 29 40 40 • Spindle speeds approx. 1/min : 1,000 5,000 10,000 20,000 24,000 • Torque approx. Nm : 27 27 27 19 17 • Tool diameter with free neighbouring positions : 125 mm • Swivelling table (nc / hydraulic indexing) : vertical axis, 0° - 180°, max. Rotation angle in connection with 5th axis : +/- 150° • Rotary table diameter : 400 mm, rotary table (horizontal axes u1-u2/ v1-v2), rotary table (nc / hydraulic clamping) : n x 360o, vertical axis, rotary table diameter : 330 mm • Pallet clamping : 2 zero point clamping modules/ table • Position measuring systems : absolute position measuring systems • Position tolerance x - y - z : 0. 008 mm (vdi/dgq 3441) Extra Information Machine still under power

Condition: used, Year of construction: 2023, Key Technical Specifications - Brand / Model: DN Solutions (formerly Doosan) PUMA GT3100L - Year of Manufacture: May 2023 - Serial Number: ML0313-000510 - Power Supply: AC 380V – 3 Phases – 50/60 Hz - Nominal Capacity: 36.11 kVA (Full Load Current: 54.87 A) - Machine Weight: 6,900 kg (Maximum rigidity and stability) - Compliance: CE Certified What is this machine used for? The PUMA GT3100L is a heavy-duty, computer-numerical-control (CNC) horizontal turning center engineered for intensive machining of medium-to-large components. It excels at high-precision turning, facing, threading, and boring of high-value parts. This is the ideal production tool for demanding industrial sectors such as automotive, energy (oil & gas), hydraulics, and heavy precision mechanical engineering. How does it stand out from other models? Cgsdpfx Aezbb Ikegfsu - "L" (Long Bed) Configuration: Unlike standard compact variants, this long-bed version offers an extended turning length, allowing you to process long shafts and oversized workpieces without sacrificing structural rigidity. - Ultra-Robust 6.9-Ton Frame: Its massive cast-iron bed perfectly dampens vibration. This guarantees flawless geometric accuracy and significantly extends tool life, even during aggressive roughing cuts on hard alloys. - 2023 DN Solutions Generation: Benefiting from the manufacturer's recent rebranding and latest technological advances (formerly Doosan Machine Tools), this machine integrates modern electronics and high-efficiency motors (36.11 kVA), delivering an exceptional balance between high torque and energy efficiency.