Used Sander Ozon Generator Sander for sale (10,915)

Condition: used,

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: DOCAT 70, We offer this used ozone generator and abatement device Tonello ECOFREE 2, year of manufacture 2018. Machine type: DOCAT 70 Power supply: 3Ph+GND Voltage and frequency: 400V-50Hz Compressed air pressure: bar Hydraulic pressure: bar Maximum steam pressure: bar Weight: 300 kg Drum volume: l Serial number: 07758 Year of manufacture: 2018 Iaodpfxsyvzznj An Uor Installed power: 4 kW Maximum peak current: 7 A Maximum operating current: 3 A Power cable cross section: 4 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Ijdpev Uag Iofx An Uoar

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Ijdpeyl Nntefx An Usar

Condition: ready for operation (used), Year of construction: 2003, Belt width: 10/12mm, belt material: PP (polypropylene), connected load: 1kW, length: 1420mm, width: 615mm, height: 1550mm. The machine has already been dismantled, an on-site inspection is possible. Iodouyk N Uepfx An Usar

Condition: reconditioned (used), functionality: fully functional, Manufacturer: Sander Type: Vario Master Iajdottwpbepfx An Uor Model: 9480 Passage height of the pallet: approx. 2200 mm Pallet passage width: max. 1300 mm Bayonet position from the floor: 500 mm Year of manufacture: 1999 Type: Vertical strapping machine Operating voltage: 400 V Power: 2 kW Control voltage: 24 V The machine is installed in our workshop and technically overhauled. We are selling a fully functional machine.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Isdpexfrv Eofx An Ujar

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Iaedpfxox U Tgmo An Ujr Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period.

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Iajdsw U N Daepfx An Uer

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 4806170, grinding width: 1,350 mm, grinding belt length: 2,260 mm, workpiece height (max.): 160 mm, grinding belt width: 1,380 mm, TECHNICAL DETAILS Working width: 1,350 mm Abrasive belt width: 1,380 mm Abrasive belt length: 2,260 mm Working height range: 3 - 160 mm EQUIPMENT Color display control system IPC Program positions can be stored in the terminal Iasdpfx Ajyzm Sien Ujr Automatic real-time adjustment of all necessary processing parameters Perforated rubber conveyor belt for extraction External reference: MNA001

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 5211291, feed rate X-axis: 16 m/min, grinding width: 1,350 mm, power: 15 kW (20.39 HP), grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, TECHNICAL DETAILS Sanding width: 1,350 mm Abrasive belt length: 2,620 mm Workpiece thickness: 3 to 160 mm Feed speed range: 3 – 16 m/min (infinitely variable) MACHINE DETAILS Motor power: approx. 15 kW Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,500 x 2,500 mm Machine weight: approx. 4,300 kg EQUIPMENT Cross unit for intermediate lacquer sanding Combination unit (roller + sanding pad) Electronic segmented sanding pad for precise surface finishing Iaedpeyx Et Tjfx An Usr Finishing brush for perfect end results Ionization device for dust neutralization Dust extraction with propeller fan for a clean working environment Touchscreen control for user-friendly operation Calibrating and fine sanding in a single pass High flexibility due to multiple units Robust construction for industrial use Ideal for processing lacquered, veneered, and solid wood panels Note: The above data is taken from the manufacturer’s brochure or documentation and may differ from actual values.

Condition: used, Used Oxymat O500 PSA industrial oxygen generator made in 2012 and with capacity 40.6 m3/hour. Containerised system that includes the following equipment: - Almig 45 belt air compressor, cyclone separators, air receiver, Donaldson DCO 360 AB dryer, Donaldson ultrafilter, Oxymat 2-column O500 system, oxygen receiver, Oxymat control panel, Rix compressor, low oxygen gas detection system. - Not suitable for medical oxygen. Isdpfx Aneyt Rc Ij Uear

Condition: used, This listing is for Peak Scientific Nitrogen Generator Corona 1010 + Corona compressor The unit is in full working condition and ready for immediate use Designed to provide a consistent, high-purity nitrogen supply for LC-MS applications. Compact and efficient, the Corona 1010 with integrated compressor ensures reliable performance and reduced reliance on gas cylinders in laboratory environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Iedpfxoy Dp A Aj An Ujar Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: good (used), Year of construction: 2014, operating hours: 246 h, functionality: limited functionality, overall weight: 3,000 kg, fuel type: diesel, color: green, power: 176 kW (239.29 HP), output current: 318 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 176 kW (239.29 HP), nominal power (apparent): 220 kVA, continuous power: 163 kW (221.62 HP), continuous power (apparent): 203 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo mPenta, type of cooling: water, Brand: Pramac Model: GSW220V Year of manufacture: 2014 Serial number: PEE2563417 Iaedpfx Ajy A Iuujn Uor Operating hours (read): 246 Capacity (kVA): 220 - 202.8 Capacity (kW): 176 - 162.2 Engine brand: Volvo Penta Engine model: TAD733GE Fuel: Diesel Alternator brand: Mecc Alte Alternator model: Eco38 2S Voltage: 400 Frequency (Hz): 50 RPM: 1500 Amperes (A): 317.6 Dimensions LxWxH (mm): 2650 x 1180 x 2450 Weight (kg) approx.: 3000 Units in stock: 1 Made in: Spain Comments: Ex-emergency set in good condition

Condition: excellent (used), - Dimensions: 2254x1150x1680 mm - Operating hours: 1147 hours - Power: 70 kVA / 61 kW - Type: Diesel - Engine type: JOHN DEERE - Model: 4045TF150 - Rated speed: 1500 rpm - Tank capacity: 190 L - Consumption (at 75% load): L/h Iaodpfxewyc Tto An Ujr - Voltage: 230/400 Volt - Weight: 1597 kg

Condition: excellent (used), - Condition: Used - Power: 235 KVA / 188 KW - Type: Diesel - Engine: Renault - Rated Speed: 1500 rpm - Voltage: 400 V - 50 Hz - 3 phase - Efficiency: 92.3% - Continuous operation: 30 V - 3.8 A Iaodpfx Anowyc Tms Uer - No load: 0.95 A - Weight: 795 kg - Year of manufacture: 1998

Condition: used, - Manufacturer: SDMO - Reference: NS60SL.V M - Operating Hours: 85,009 hours - Speed: 1,500 rpm - Type: Diesel - Year: 10/98 - Power: 60 kVA / 48 kW - Current: 87 A - Voltage: 230 / 400 V - Phases: 3 - Frequency: 50 Hz - Weight: 1,555 kg Iodpfx Aoxqxz Esn Ujar Used 60 kVA Generator Set for Sale Discover our used 60 kVA generator set, ideal for your industrial or backup power requirements. This high-performance model is perfect for ensuring a reliable power supply. Technical Specifications - Power: 60 kVA - Rated Speed: 1,500 rpm - Voltage: 400 V - Weight: 1,555 kg Nlsdcvexqxz Eoyqi Ajh - Year of Manufacture: 1998 - Engine: (to be confirmed: likely Volvo Penta, Perkins, or John Deere) 4-stroke Diesel, water-cooled - Alternator: Leroy-Somer LSA C6/460, 60 kVA – power factor 0.8 – AVR R438 – IP21 – Class H, Weight 275 kg Why Choose a Used Generator Set? Choosing a used generator set allows you to benefit from an economical solution while delivering sufficient power for your projects. With its robust construction and excellent efficiency, this model is a wise choice for companies looking to minimize their energy costs. For any inquiries or to schedule a viewing, please do not hesitate to contact us. Take advantage of this opportunity to acquire a reliable and cost-effective 60 kVA generator set! The listing was translated automatically. Translation errors are possible.

Condition: excellent (used), Year of construction: 2011, operating hours: 103 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, overall weight: 15,500 kg, fuel type: diesel, color: grey, power: 2,000 kW (2,719.24 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, motor manufacturer: Stamford / CUMMINS, type of cooling: air, rotational speed (min.): 1,500 rpm, DUAL SWITCHING 50/60HZ 4 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE THREE UNITS IN TOTAL - ONE HAS BEEN PURCHASED. ALSO THE TWO CUMMINS CONTROL SYSTEM AND ADDITIONAL INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime Iaedpfx Aex R Szujn Ujr 4 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Joshua Alexander Iron Flag Global Limited

Condition: used, Year of construction: 1976, cone distance min./max. 0/108 mm Iasdpfx Ajyh Rmton Uer Pitch angle min/max 5°/84° Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm speeds: 98-286 weight of the machine ca. 6577 kg dimensions of the machine ca. 1560 x 2140 x 2200 mm Equipment/accessories: -Cutting tools -Spacer angle -Technical documentation

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm Isdpfeyh Rmmox An Ujar pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation

Condition: used, Year of construction: 2018, total width: 1,800 mm, total height: 2,200 mm, total length: 1,900 mm, Empty weight: 1.500 kg Wide belt sander Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Sanding unit COMBI Engine 11kW (15HP) Transport dimensions:1800x1300x2100mm (LxWxH), Weight 1850kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 18.03.7507 - Number of units [pcs]: 1 - └ Unit 1: - - Position: Top - - Type of unit: Sanding pad - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1100 - - Roller diameter [mm]: 150 - - Roller material: Rubber - - Motor power [kW]: 15 - Max. working width [mm]: 1100 - Min. working height [mm]: 3 - Max. working height [mm]: 152 - Feed motor [kW]: 0.55 - Feed speed: Manual - Min. feed speed [m/min]: 2.5 Iaedeyz U Dmepfx An Usr - Max. feed speed [m/min]: 8 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.6 - Transport dimensions: 1900mm x 1800mm x 2200mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2007, operating hours: 592 h, Calibration and Fine Sanding Automatic, Wide Belt Sander with Electronic Segmental Sanding Shoe and Lacquer Sanding A video of the machine in operation can be provided upon request. Ideal sanding machine for interior finishing workshops, also suitable for intermediate lacquer sanding. Single-belt machine with combination sanding unit and electronic segmented pressure beam, edge segments can be switched on and off Segment width of pressure beam: 35 mm Contact roller pneumatically adjustable, low wear thanks to grooved steel roller Abrasive compensation Drive motor: 7.5 kW with automatic motor brake, infinitely variable belt speed via frequency converter from 2 - 18 m/s Feed belt speed continuously adjustable via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt cleaning device Cleaning brush at outfeed Constant working height of 900 mm due to top part adjustment, thus also integrable in sanding lines Feed belt is still very grippy and in very good condition Maximum sanding width approx. 1090 mm Workpiece height approx. 3 to 150 mm Common abrasive belt dimensions: 1120 x 1900 mm 3 rubber-coated pressure rollers Infeed roller table and foldable outfeed table Prepared for vacuum blower. The carpet is perforated and plug for optional blower is available. Alternatively, the mat can be connected to an extraction system. Extraction connection: 1 x 180 mm, 1 x 140 mm, and 2 x 100 mm Terminal control with 50 programmable sanding programs for automated machine operation. Parameters: belt speed, feed speed, workpiece height, pressure beam activation points front and rear as well as edge segments, belt air nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE mark Operating manual without the shown power cable Original paint, only partially retouched Approx. 592 operating hours, i.e. about 40 minutes per week. Iodjym Du Repfx An Usar Dimensions approx. 1800 (with table 2600) x 1800 x 2150 mm (LxWxH). Weight approx. 2200 kg. The machine can gladly be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See also 'other offers from this provider.'

Condition: new, Year of construction: 2025, machine/vehicle number: MLK1-07035-04/03, fuel type: diesel, motor manufacturer: Cummins 6BT5.9-G1, Field of application: Construction Generator capacity: 110 kVA Generator: Stamford UC.I274C14 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Please contact Ronald van der Laar, Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Iaedpfjymi Rqox An Uor = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: LX905981, fuel type: diesel, motor manufacturer: Caterpillar C9, General information Field of application: Construction Weights Empty weight: 3.524 kg Functional Iaodpfx Anoyvd Aas Ujr Generator capacity: 330 kVA CE mark: yes Other information Fuel consumption: 48.4 Liter / Hour at 75% Load with fan Generator: Caterpillar LC5114J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 610 l Transport dimensions (LxWxH): 4,3x1,41x2,165 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Wide Belt Sander SCM UNO RCS - used - Combination unit with contact roller and sanding pad, contact roller made of steel, rubber-coated contact roller, sanding belt oscillation, infeed and outfeed table extension. ----- Technical Specifications ----- Working width: 920 mm Number of belts: 2 units Sanding belt size: 930 x 1,525 mm Feed speed: 4.5 / 9 m/min Max. workpiece thickness: 160 mm Min. workpiece thickness: 3 mm Extraction port Ø: 2x160 mm Motor power: 11 kW Dimensions (LxWxH): 1,700 x 1,480 x 1,600 mm Weight: 1,175 kg Isdpey Dhudjfx An Uoar