Used Roundo Ps 255 for sale (3,015)

Condition: used, Year of construction: 1991, Max. Bending length 3000 mm Max. Prebending 6 mm Max. thickness 14 mm (3999 mm diameter) Bjdpfx Acozxhyyj Tjdg Top roll dia 255 mm Hydraulic drive on all rolls Hydraulic drop end 3-rolls Motor power 5,5 kw

Condition: excellent (used), Year of construction: 2007, Technical data: Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Bdodpfjztckiex Ac Teg Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 1980, 2500 mm x 340 Ømm top roller Rolling capacity: 2500 x 23 mm (5 x top roller diameter) Max. sheet thickness: 2500 x 15 mm Bjdpfxoyz Acwj Ac Tjdg Equipped with top crane and side support

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Bodjzuzpyepfx Ac Tsdg Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: like new (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: EB1206, total height: 1,800 mm, total length: 1,700 mm, total width: 2,600 mm, Proth PSGS-2550AH surface grinding machine. Like new. Never used!! Fully functional. Magnetic clamping plate: 500x250x80mm Max. workpiece weight: 320kg Travel distances: Longitudinal: 600mm Transverse: 280mm Spindle speed: 1500 RPM Hydraulic longitudinal feed: 1-25m/min Transverse feed: 0.1-10m/min Automatic vertical adjustment, computer-controlled Weight: approx. 1350kg Electronic handwheel Demagnetization Cross-grinding attachment Bdsdpfxezcdy Ej Ac Tog Coolant system Machine base made of high-quality MEEHANITE cast iron, stress-relieved multiple times, resulting in unique rigidity and smooth operation. Includes documentation, balancing device, grinding wheels and flanges, and leveling feet.

Condition: excellent (used), The fully hydraulic production rapid bow saw is equipped with a universal hydraulic system allowing for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, utilizing a uniform tooth pitch of 3 or 4 teeth per inch. Features include preloaded bow guide, enclosed oil hydraulics, triple pivot bearing, separate coolant system, steplessly adjustable hydraulic cutting pressure, lift motion and accelerated return stroke, and is factory-equipped with an infinitely variable miter facility. The saw bow can be lifted in rapid traverse mode. The pendulum vise ensures optimum saw blade utilization. The longitudinal guide features ground and hardened guide rails for transmitting cutting forces to the saw bow. Automatic end-of-cut shut-off. Push-button controls for ON, OFF, and rapid traverse of the saw bow. Manufacturer: KASTO Machine type: Metal bow saw Model: PSB 253 U Drive power: 1.6 kW Stroke rates: 50 / 100 / 164 per min Cutting speed: 11 / 22 / 36 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 255 mm Bsdpjxiv Sfjfx Ac Todg Flat cutting capacity: 255 x 160 mm Miter range: 0-45° Workpiece support height: 500 mm Weight: 490 kg Length/width: 1200 x 750 mm Height: 850 mm Saw blade dimensions: 400 x 36 x 2.0 mm Year of manufacture: 1990 Accessories: Coolant device

Condition: used, Year of construction: 2002, Max. bending length 3000 mm Max. prebending 65 mm Max. rolling capacity 77 mm Top & bottom rolls dia. 700 mm Side rolls dia. 570 mm 4-roll Fully hydraulic machine Hydraulic drop end Motor power 163 Kw CNC-control (upgraded in 2121) Equipped with: 1 hydr. top support (9000 mm diameter) installed in 2014 Bdedszxc Dyspfx Ac Teg NOTE !!! The hydraulic side table shown on photos - is NOT included !!!

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, mount diameter: 3,000 mm, For sale: a Pullmax F13C dishing machine for steel vessel bottoms. Bdedpfjzrt Aaex Ac Tsg The machine is in good condition and ready for operation. Inspection is possible. Maximum thickness of the vessel bottom: 13 mm. Maximum diameter: 3000 mm.

Condition: new, functionality: fully functional, Year of construction: 2026, New three rolls angle roll Roundo R3 with tools, digital readout and remote control. Bedpfx Asd N Ahdec Tedg

Condition: excellent (used), functionality: fully functional, Capasity 30 cm3. Flat steel 200 x 30mm (800mm diam) flat stell standing 100 x 18mm (800 mm diam) Bodpfezhmbusx Ac Tjdg

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Bsdezxup Iepfx Ac Todg Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 255100, punching force: 20 t, total height: 2,150 mm, total width: 2,900 mm, total length: 4,900 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, working range: 1,270 mm, type of input current: three-phase, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 75 kg, overall weight: 11,000 kg, input current: 40 A, input frequency: 50 Hz, table load: 75 kg, feed rate X-axis: 82,000 m/min, feed rate Y-axis: 82,000 m/min, feed rate Z-axis: 82,000 m/min, travel speed (max.): 82,000 mm/min, input voltage: 400 V, AMADA EUROPE 255 CNC Punching Machine CNC turret punching machine AMADA EUROPE 255, year 1999, equipped with a GE Fanuc Series 18i-P CNC control. The machine is installed and available for inspection and demonstration while powered on, by appointment. Technical specifications: Bdedpszw Ui Ejfx Ac Tjg Manufacturer: AMADA EUROPE Model: EUROPE 255 Year of manufacture: 1999 CNC control: GE Fanuc Series 18i-P Punching force: 200 kN (20 t) Working range X x Y: 1,270 x 1,270 mm Maximum sheet thickness: 3 mm Table load: 75 kg Turret: 27 stations Maximum positioning speed: 82 m/min Power supply: 400 V / 50 Hz / 3-phase Nominal current: 40 A Installed power: 29 kW Machine dimensions: approx. 4,900 x 2,900 x 2,150 mm Machine weight: approx. 11,000 kg CE marked The machine is currently installed and can be inspected while powered on. Available immediately. Inspection by appointment. Location: Greece

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Bjdpexn I Rwofx Ac Tedg

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory Bdodpfod Iip Aox Ac Tjg • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: good (used), Year of construction: 1990, Length:2000mm Width:1500mm Height:1500mm Bdedpfezc Iw Usx Ac Teg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, functionality: fully functional, air demand: 4,000 m³/h, pressure: 5 bar, operating pressure: 7 bar, inner dimension width: 900 mm, workpiece weight (max.): 1,000 kg, filter area: 120 m², input voltage: 380 V, working range: 1,400 mm, tank capacity: 960 l, suction capacity: 4,000 m³/h, Equipment: cabin, documentation/manual, Automatic hook-type shot blasting system complete with monorail overhead conveyor, abrasive recovery system, bucket elevator, pneumatic shot selector, vibrating screen, dust collection filter, and control panel. Main features: Maximum workpiece diameter: 900 mm Maximum workpiece height: 1,400 mm Maximum load weight: 1,000 kg No. 6 hook holders Bsdpezdqtmjfx Ac Tjdg No. 4 Carlo Banfi X1 centrifugal turbines Turbine power: 4 x 7.5 kW Abrasive flow rate: 300 – 360 kg/min Abrasive capacity (initial charge): 960 kg Power supply: 380 V three-phase – 50 Hz Total installed power: approximately 22 kW Carlo Banfi PS-6B dust collection filter included: Air flow rate: 4,000 m³/h Filter area: 120 m² No. 6 microfibre filter cartridges 4 kW suction fan Automatic cartridge cleaning system with compressed air Required compressed air pressure: 5 – 7 bar System suitable for shot blasting and surface cleaning of castings, metal structures, mechanical components, stamped parts, and steel products. Machine complete with shot recovery and recycling system, electrical panel, and original technical documentation. Includes spare parts, including motors and parts for the blasting chamber. Video of the machine in operation available upon request. Another identical shot blasting machine is available.

Condition: like new (used), Year of construction: 1998, Technical Data: Bdodpfjy Rxuzex Ac Teg 2 hydraulically adjustable rollers 3 driven rollers Display with digital readout Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Dimensions (L x W x H): approx. 2400 x 2000 x 1600 mm Weight: approx. 7.8 t Accessories: Various tools Condition: Very good, almost as new The seller assumes no liability for typing or data transmission errors. The machine complies with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 Bjdoxuf Slspfx Ac Tsdg - Number of driven rolls [pcs]: 3 - Shaft diameter [mm]: 75 - Top roll diameter [mm]: 225 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, cutting diameter Ø 255 mm capacity 90 degrees: square 230 mm capacity 90 degrees: flat 300 x 180 mm dimensions of saw-band 2765 x 27 x 0,9 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 mm capacity 45 degrees: flat 200 x 160 mm Bdodpjzv Uldefx Ac Teg capacity 60 degrees: round 135 mm capacity 60 degrees: square 110 mm capacity 60 degrees: flat 130 x 100 mm cutting speed 18- 110 m/min power requirement 1,5/ 1,8 kW dimensions 1,7 x 1,95 x 1,83 m weight of the machine ca. 0,8 t full automatic one side miter bandsaw NC- controlled - miter cut left 45° full automatic mode - miter cut left 60 half automatic mode - CNC- controll for 10 saw programms and 99 subroutine - automatic lenght movement with ballscrew - roller conveyor feed side - stepless cutting speed

Condition: used, Year of construction: 2018, max. wheel diameter 450 mm max. module 4 mm Control Siemens 840 D sl internal diameter 100-300 mm weight of the machine ca. 11 t dimensions of the machine ca. 5,85 x 8,30 x 3,80 m GLEASON-PFAUTER 300 PS Gear Skiving Machine – Year 2018 For sale is a high-performance CNC gear skiving machine type GLEASON-PFAUTER 300 PS, built in 2018. The machine is ideally suited for the precise machining of internal gears and offers excellent dynamics, advanced CNC technology, and a robust machine design. Equipped with a powerful Siemens 840D sl CNC control, this machine provides optimal conditions for efficient and repeatable gear manufacturing processes. Technical Specifications - Max. gear diameter: 450 mm - Max. module: 4 mm - Internal diameter range: 100 – 300 mm - Max. allowable skiving cutter diameter: 175 mm - Mounting surface diameter: 125 mm - Axis Travels: X-axis travel: 350 mm Y-axis travel: 300 mm Z-axis travel: 440 mm - Max. skiving head swivel angle: ±25° - Workpiece table outer diameter: 570 mm - Max. table load capacity: 5 kN - Feed Rates and Speeds X-axis feed rate: 12,000 mm/min Y-axis feed rate: 5,000 mm/min Z-axis feed rate: 8,570 mm/min - Tool speed: 0 – 3,000 rpm - Workpiece table speed: 0 – 1,500 rpm Bdedpszupl Nsfx Ac Tjg Additional Equipment / Information - CNC Siemens 840D sl - Swivel gripper slide travel: 180° - Operating voltage: 400 V - Machine weight: approx. 11 t - Space requirement: approx. 5.85 × 8.3 × 3.8 m - Hydraulic oil capacity: 150 l - Coolant capacity: 850 l - Motor and hydraulic cooling: 100 l The machine is in very good condition and is ideally suited for demanding series production and high-precision gear manufacturing applications. Inspection by appointment possible.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ATM Model: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine Bsdpfx Acezizp Aj Tsdg ATM Brillant 255 – Year of manufacture 04/2019 Industrial unit designed for precise material sectioning in metallography, laboratory, and materials testing applications. The machine comes with a base cabinet and integrated coolant system. Several suitable cut-off wheels are included (see photos). Very robust professional quality Technical Data (as per nameplate): Model: Brillant 255 Year of manufacture: 04/2019 Manufacturer: ATM GmbH Electrical Data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse protection: 32 A Mechanical Data: Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Wheel bore: 32 mm The machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), functionality: fully functional, 1. Mawera PS silo discharge system, in very good condition. 2. Weiss silo discharge system with chain. Year of manufacture: 1989, very robust design. Already dismantled. Arm length: 3 m. Motor: 5 kW. 3. Mawera SST hydraulic silo discharge system with 2 push rods, length: 14.5 m / piece. With hydraulic cylinders, unit, documentation, etc. The Mawera SST two-beam, hydraulically operated discharge system is used for the uniform and continuous discharge of wood chips from a rectangular silo. The slides or shovels move the material in alternating strokes to feed the boiler. Silo length: • Design with 12 slides: 14.50 m Internal width of the silo: 4.24 m Shovel blade width: 900 mm, shovel depth: 250 mm, shovel height: 70 mm 4. Mawera RSS spring arm silo discharge system: Design: Rotating silo discharge system with spring arms. Bsdpfx Aszv Eiasc Tedg Application area: Discharge of wood chips, wood shavings, sawdust, and biomass fuels. The rotating arms located on the silo floor convey the fuel to the central discharge point. Outlet: Central discharge opening / transition to a further conveying system.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Excellent condition No heavy use Bjdpfx Acjzc Ruco Tedg

Condition: good (used), Technical data: 2 hydraulically adjustable rollers 3 driven rollers Roller diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t Accessories: various tools Bdodpfjytyf Sjx Ac Tog The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1994, Technical Data: - 2 hydraulically adjustable rolls - 3 driven rolls - Main motor power: 5.5 kW - Machine can operate horizontally or vertically - Drive shaft diameter: 105 mm - Standard attachment roll diameter: 275 mm - Working speed: 0 – 7 m/min - Digital display Bending Capacities: - Flat steel: 100 x 25 mm - Angle steel: min. 100 x 100 x 12 mm - T-profile: min. 120 x 120 x 13 mm - Round steel: 70 mm - Round pipes: 100 mm - Square tubes: 90 x 90 x 5 mm - CE marking - Dimensions (L x W x H): approx. 1600 x 1500 x 1500 mm - Weight: approx. 3 t Condition: Very good condition Accessories: Various tools Bedeyurwvopfx Ac Tjdg The seller is not liable for typing or data transmission errors. The machine is in appearance, technology, and wear consistent with its age; used machines are sold without any guarantee.