Used Render-Metalclean Spray Cleaning System Rotary Basket for sale (43,522)

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg Dcjdpfx Aioq Ewgkj Aok - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Dcsdpfx Aiehkzu Aj Ask Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2100218, HGH-SAT SR 1000 2-Tank Spray Cleaning System (Year of Manufacture: 2011) Industrial cleaning system in durable stainless steel construction for efficient aqueous cleaning of components. Equipped with a 2-tank system (washing + rinsing), rotating basket, and fully automatic cleaning cycle. High loading capacity up to 900 kg and powerful spray pressures ensure reliable cleaning results. Ideally suited for use in mechanical engineering and series production. Technical Data – HGH-SAT SR 1000 Djdpfx Aiozgvm Dj Aeck Manufacturer: HGH-SAT Ultraschall Anlagentechnik Model: SR 1000 Configuration: 2-tank System Type: Spray cleaning system Year of manufacture: 10/2011 Serial number: 2100218 Electrical Data Mains voltage: 230 / 400 V Frequency: 50 Hz Rated current: 45 A Total power: 30 kW Performance Heating power: 24 kW Total connected load: 30 kW Tank Data Cleaning tank capacity: 350 litres Rinse tank capacity: 250 litres Process Spray pressure tank 1: 5 bar Spray pressure tank 2: 3 bar Cleaning medium: aqueous Loading Max. load weight: 900 kg Dimensions Depth: approx. 2600 mm (open) Depth: approx. 1800 mm (closed) Width: approx. 3500 mm Height: 2810 mm Mechanics Basket rotation: 4 rpm Drive: chain drive

Year of construction: 2025, condition: new, functionality: fully functional, Available from Swiss warehouse, immediate delivery! 24-month warranty Dcsdpfxsir Apco Ai Aek Payload: Cleaning area: D = 800 mm Internal height: 530 mm Load weight: 150 kg Machine body, internal piping system, control cabinet, and wash basket made of stainless steel - Weekly timer for heating - Electronically controlled basket drive - Level control - Lid locking - Removable filter sheet Accessories: Swath extraction Automatic level replenishment Oil skimmer, WE version Pumping device / floor flushing with hose and manual ball valve

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Dsdpswty H Dsfx Ai Asck Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️Top Service⚡️Fast Delivery⚡️Great Support! ✈️ Plus shipping costs – shipping on request.✈️ Fast Delivery: Only 4-6 weeks after payment receipt! Important Note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the best chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ ►Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can fully develop its effect, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – whether oil, dirt, or oxide – is reliably removed. Only in this way is lasting corrosion resistance and excellent paint adhesion possible. Each product requires an individually tailored process. Whether alkaline or acidic degreasing, iron or zinc phosphating, nanotechnology or chromium-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️Maximum energy efficiency ✳️Minimized chemical and water consumption ✳️Precise process control with automatic dosing and pH monitoring ✳️Durable construction made of corrosion-resistant stainless steel or plastic Our promise: Customized technology for the highest standards Dodpfx Aiokwct Ue Asck Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We take into account all critical parameters – from heating capacity to water circulation to steam separation and chemical separation. The spray washing lines are seamlessly integrated into your conveyor technology. All cleaning, rinsing and drying processes run fully automatically and efficiently – ready for perfect coating. Available systems: ✳️Spray and immersion pretreatment lines ✳️Nanotechnology systems (e.g. Bonderite, Oxsilan) ✳️Degreasing and pickling systems ✳️Iron and zinc phosphating lines ✳️Chromating and chromium-free systems PROTON – Technology that convinces. Experience that delivers results. ⭐Follow us for new campaigns⭐ ☀️2 YEARS WARRANTY☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Year of construction: 2025, condition: new, Parts cleaning machine, spray cleaning system, type L122 Dcodpehl Ic Rofx Ai Ajk Automatically operating hot water chamber cleaning machine with basket drive via geared motor, machine housing made of stainless steel 1.4301, - 2 sets of three-sided arranged nozzle systems made of stainless steel with stainless steel flat jet nozzles, - 2 stainless steel washing pumps (manufacturer: Xylem/Lowara), - Level control as dry-run protection - 2 suction filters as pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Usable height: 700 mm - Max. load weight: 300 kg - Spray pressure: 2 x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (RT - 60°C) - Connection power (electrical): approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 (h) mm

Year of construction: 2024, condition: as good as new (ex-display), -Usable internal dimensions: D = 970 mm, H = 540 mm (other sizes available upon request) -Touch screen -Spray pressure: 3 bar -Basket load: 200 kg -Tank volume: 210 L -Standard accessories: • Oil skimmer • Frame, lid, and housing made of stainless steel • Time-controlled electric steam extraction • Reinforced basket made of stainless steel • Electric pump made of stainless steel • Filter made of stainless steel on the suction side of the pump • Heating elements made of stainless steel • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) Dodpof A Nq Usfx Ai Aock • Automatic water supply • Safety limit switch monitors lid opening • Spray nozzles made of stainless steel • Weekly timer for heating and oil separator • Operating hour counter

Year of construction: 2009, condition: excellent (used), Cleaning system is fully functional. Dodpfx Aszkkb Dsi Aock Working dimensions: diameter 800mm, working height 600mm Tank volume: 90L Options: Automatic cleaning or with washing brush Interior lighting Design / Accessories: Direct drive for the washing basket Mist extraction Low water level protection / level control Lid locking Weekly timer Chip/particle filter with bath cover plate 5 ECO rinse (fresh water) for minimal water consumption with machine-side hot water preparation Three-dimensional cold air blow-off Oil skimmer Drainage device / bottom flush with pump in gray cast iron and galvanized pipe system Hose connection and tap valve in aluminum/plastic

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Machine body, internal pipe system, control cabinet and washing basket made of stainless steel - electronically controlled basket drive - level control - lid locking - removable filter plate - weekly timer function Oil skimmer model WE AM version for additional manual cleaning - lid with viewing window, lighting, and sleeve gloves - low-pressure pump, 3-6 bar, with brush washing system and hand spray gun - blow-off gun, compressed air High-pressure unit, 160 bar, for AM version permanently installed on the machine side. Dcodef A Nqujpfx Ai Ask

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The water is pressed through the RO membrane by means of a high-pressure pump. The desalinated water/permeate is then led to consumption via a 1000 litre reservoir. The water containing the concentrated salts/concentrate is led to outlet. The relation between permeate/concentrate shall be adjusted manually on the needle valve. Dodpfxezl E Die Ai Aeck Under normal operating conditions the RO membranes have a long lifetime. But even with a good raw-water quality, layers of impurities will, to a certain extent, occur and there will be a slow reduction of the permeate capacity.

Condition: used, functionality: fully functional, Comac LE 20 is a walk behind floor sweeper / scrubber is a walk-behind Dcodpfx Aijzl E Afs Ask scrubber-dryer designed for maintenance cleaning of commercial surfaces, such as retail outlets and gyms, up to 1400 sq.m

Condition: like new (used), For sale is a Renishaw XL80 laser interferometer system for machine calibration, suitable for linear and rotary axes, in very good condition. The measuring device is fully functional and has been used very little. It was manufactured in 2022. The device has an accuracy/deviation of 1 nm, and the software is, of course, included in the offer. If you have any further questions, please do not hesitate to contact me. Dcjdpfxezrgvme Ai Aok

Condition: used, Year of construction: 2012, power: 800 kW (1,087.70 HP), Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Dedpjwuyzwofx Ai Ajck Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: used, Year of construction: 2016, Basket size (W x H x D): approx. 480 x 400 x 200 mm, weight: 3,900 kg, power: 55 kW, 1 electric roller conveyor, approx. 9 running meters, with SIEMENS Simatic HMI control system. Dedpfozqy Sfox Ai Ajck

Condition: new, Year of construction: 2025, Technical specifications: Dcjdpfx Ajcdy Ndei Ajk ALKO clean air extraction system, mobile type, Model Mobil-Power Unit APU 120, motor power 1.5 kW, suction nozzle diameter = 120 mm, sound-dampened, mobile collection container, 135 liters, manual filter cleaning, dimensions: L = 1,085 mm, W = 650 mm, H = 1,985 mm, volume of dust container: 135 liters, weight: 117 kg, nominal volumetric flow rate (after cleaning): 814 m³/h. Exhibition model. Available at a special price. Location: In stock at Bitburg warehouse.

Condition: new, Year of construction: 2025, Exhibition model – sold at a special price Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Dcodocdy I Tspfx Ai Aok Max. volumetric flow: 6,000 m³/h Rated volumetric flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special feature: The unit is equipped with a noise silencer – therefore extremely quiet – can be sold with or without it. Location: Available from stock at 54634 Bitburg.

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 motor included as standard max. volume flow up to 10,000 m³/h at the fan approx. 73 m² filter area pre-separator included as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Intake nozzle 355 mm Motor rated power 15.0 kW/3Ph Voltage 400 V/50 Hz max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Dsdpfx Ajdqzhhei Ajck Weight 1,074 kg

Condition: new, Year of construction: 2025, A truly reliable and mobile family: AL-KO POWER UNIT® dust extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium dust extraction volumes or an ideal addition to existing stationary systems. Your advantages: • IE 3 motor as standard • approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ is reliably maintained (wood dust) • optionally with type-tested rotary valve airlock (FSA) • Tested backflow flap • Integrated automatic extinguishing system Technical data: • Motor rated power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • max. volume flow: up to 8,500 m³/h at the fan • Rated volume flow: 6,927 m³/h • Negative pressure at Vnenn.: 2,543 Pa • Suction nozzle: 350 mm • Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg • Dust class H3 Location: Available from stock at 54634 Bitburg • immediately available – in stock Djdpfx Aishkzt No Asck Subject to prior sale

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160, Holzkraft For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft Chip collection volume: 2 x 165 l Nominal outer diameter of the extraction nozzle inlet: 160 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1654 mm Dcjdpshkzttefx Ai Aok Weight approx.: 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level max.: 73 dB(A) Volume flow Nominal volume flow: 1448 m³/h Dust class: H3 Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug, 5-pole, and phase inverter Two swivel casters and two fixed casters with parking brake Manual cleaning Art. No. 5131620 Location: Available in stock, 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1999, Aqueous cleaning system in good condition with vacuum dryer (pump not included). Dcodpfxod Nnvhe Ai Aok Available immediately.

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Pipe straightening system for: steel pipes, with flame and water cooling Flame straightening -Drainage channel and water pump -Roller diameter: Ø 180 mm -Drive: PIV gearbox -electrically adjustable -Load capacity: 1 ton -Speed: min. 50 mm/min -Speed: max. 150 mm/min Dodscp Nvyjpfx Ai Aock -Manual switch -Counter bearing: laterally adjustable -Drive dimensions: 3600/820/H850 mm -Dimensions of counter bearing: 2950/820/H850 mm -Empty weight: 1300 kg

Condition: used, Control for cleaning system -Type: Autoclude M1000 -Dimensions: 335/210/H120 mm -Weight: 4 kg Dcjdpfx Aijb Uhtwo Aek

Condition: used, Year of construction: 1998, working width 1000 mm battery 24 V weight of the machine ca. 0,75 t dimensions of the machine ca. 1,7 x 1,0 x 1,4 m Dsdpjzlukfsfx Ai Asck Ride-on sweeper - incl. charger

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system Dedpfju R Szyjx Ai Ajck - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 - new exhibition machine -