Used Reiser M&B Maschinenbau Rotary Unit for sale (96,980)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity Gusdpfxsz Agv Uo Aaxoh - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible Gedpfx Aaez Agw Eexsuh - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Gujdpfx Asz Ag Rrjaxjh - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fanuc M Series Robot Unit Complete - Type: M1IA0.5A-30P-O-CE..+ The M-1𝑖A/0.5A is a high-speed, 6-axis Delta robot, ideal for compact, high-speed order picking and assembly applications. With a payload of 0.5 kg and a work envelope of up to 280 mm, this robot is perfect for small parts handling processes requiring high versatility in industries such as electronics, precision engineering, food, medical and pharmaceutical. Its unique delta design mechanism is ideal for fast, dexterous assembly applications. It can also easily cover an additional range of applications by simply adding another optional 500 g of payload. - Robot: M-1iA/0.5A Guodpszzpuwefx Aaxjh - Robot type: Delta / parallel robot - Axes: 6 - Standard payload: 0.5 kg - Optional payload: up to 1 kg - Reach: 280 mm - Repeatability: ±0.02 mm - Weight: FANUC lists the mechanical unit itself at around 17 kg in some documentation. - Mounting: floor, ceiling/inverted or angled - Protection: IP20 - Typical controller: R-30iB Plus / R-30iB Mate Plus depending on configuration.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Guodpfx Aozz Rpceaxeh - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Gedpfx Aaszw D Haexjuh Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: used, Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 3,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, table length: 3,000 mm, spindle speed (min.): 4,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 10, Equipment: rotational speed infinitely variable, CNC drilling/milling machine No CNC knowledge required, extremely easy to operate Godpfezqvbpjx Aaxjuh Tool holder: Laip Coolant system Automatic tool changer for 10 tools Automatic tool length measurement Data import: DXF Electronic handwheel Light curtain on the operator side Spindle motor: 7.5 kW Spindle speed: 200-2000 RPM Touchscreen: 21.5" Factory inspected

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,050 kg, product length (max.): 4,030 mm, Edgebander manufactured in 2019. This LANGE Maschinenbau B 90 KFE features a panel thickness capacity of 8–60 mm and an edge thickness range of 0.4–3.0 mm. It has a feed speed of 8–10 m/min and a minimum straight-cut workpiece length of 120 mm. If you are looking to get high-quality edge banding capabilities, consider the LANGE Maschinenbau B 90 KFE machine we have for sale. Contact us for further details. Gedpfx Aasz R N E Uoxeuh • Panel thickness: 8–60 mm • Minimum straight-cut workpiece length: 120 mm • Minimum workpiece length with corner rounding: 200 mm • Minimum workpiece width: 75 mm • Edge thickness: 0.4–3.0 mm (up to 6 mm, depending on configuration) • Feed speed: 8–10 m/min • Electrical connection: 400 V, 50 Hz, 3-phase + neutral • Total connected load: 7.5 kW • Pneumatic connection: 6 bar

Condition: like new (used), Year of construction: 2020, FIBRO FIBROTOR EM12 Rotary Indexing Table 6+ units available Manufacturer: FIBRO Model: FIBROTOR EM12 Type: Rotary Indexing Table / Indexing Drive Condition: Installed in IMA line that was never commissioned. Almost new condition Application: Automated production, assembly, machining, handling and indexing systems EM.12.0220.9.152.08.0.0.3 0008143150-010-01 Description FIBRO FIBROTOR EM12 rotary indexing table, designed for high-precision intermittent rotary positioning in automated manufacturing and production machinery. The FIBROTOR range is widely used in industrial automation applications where accurate, repeatable indexing and positioning of workpieces or tooling is required. The EM12 provides a robust mechanical indexing solution and is suitable for integration into automated assembly lines, machining systems, transfer machines, packaging equipment and other special-purpose machinery. Key Features: FIBRO FIBROTOR EM12 rotary indexing table Gsdpoz Nahbefx Aaxsuh Precision intermittent rotary indexing Robust industrial construction Suitable for automated production machinery Repeatable positioning Designed for continuous industrial operation Suitable for assembly, machining, handling and transfer applications Compact mechanical indexing solution FIBRO quality engineering Keywords: FIBRO, FIBROTOR, EM12, rotary indexing table, indexing table, rotary indexer, indexing unit, rotary table, indexing drive, automation, industrial automation, machine tool, assembly machine, transfer machine, CNC, manufacturing, production line, industrial machinery, precision indexing, mechanical indexer.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp ATEX: II 2G Ex h T4 Gb Gearbox: Motovario HR 101M helical reducer Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Guedpfxjzmgdae Aaxeh Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: ready for operation (used), Year of construction: 2001, A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible. Guedpfx Aezdumqoaxoh

Condition: used, Year of construction: 2014, functionality: fully functional, MiniBendCenter RAS 79.05 Fully automatic panel bending center for small parts - General Information: Direct from manufacturer Manufacturer’s warranty Maintenance included Latest possible software version - General technical data (in mm): Blank length: 50–600 Blank width: 40–600 Sheet thickness max. (400 N/mm²), tool-dependent: 3.0 Upper beam stroke max.: 500 mm Minimum flange height (reference value, tool-dependent): 5 × s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrics: approx. 2,027 kg Weight of machine elements: approx. 945 kg - Machine-specific data: Motor operated; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Machine Configuration: Bending cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis + separate drive for rotary axis - Double sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic swivel drive for rotary axis - Tool gripper - Two-level tool magazine - Automatic tool clamping in tool magazine Enclosure: - Bending cell, front and rear Mobile operating panel: - 18" Touch & More control Intelligent loading robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining parts) Curved transport conveyor with 6 connection stations Finished part output enclosure Complete tool set RAS CAM-Office software incl. SolidWorks license and 2-year maintenance contract - Sample images Sample video available on request Gusdpfox Hyhuox Aaxeh -

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 30 kg, arm reach: 650 mm, pivoting range: 360 °, teach pendant manufacturer: Fanuc, Fanuc SR6IA-30P-C-CENR Robot complete with Controller. 8+ units available from October 2026 Robots were installed in an IMA line that was created for a special project but never commissioned. So even though the robots have been installed in the line, they were never commissioned prior to the special project being terminated. Lines are still in their original crate from IMA. FANUC SR-6iA - Type: SCARA Gujdpezzplcofx Aaxeh - Axes: 4 — J1, J2, J3, J4 - Payload: 6 kg - Horizontal reach: 650 mm - J3 vertical stroke: 210 mm - J1 range: ±148° - J2 range: ±150° - J4: ±360° - Repeatability: approximately ±0.01 mm for J1/J2/J3 - Robot weight: 30 kg - Typical applications: pick & place, assembly, inspection and packaging - Controller: R-30iB Plus for the current configuration.

Condition: good (used), Rotary unit, rotary device, turning table, conveyor belt, container rotary device, welding rotary device, welding device -Drive motor: 0.15/0.60 kW -Speed: 15/64 rpm -sealed: slewing ring Gedpjca Iatefx Aaxjuh -Device is: pneumatically tiltable -Dimensions: 2520/800/H380 mm -Weight: 524 kg

Condition: like new (used), Year of construction: 2025, operating hours: 120 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,000 rpm, feed rate X-axis: 25 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, spindle speed (min.): 140 rpm, Equipment: rotational speed infinitely variable, Our demonstration machines at a great price: MDX-60 milling and drilling center, travel range X-axis 6300 mm, and MDX 20, travel range X-axis 2050 mm. Efficient CNC technology for economical component machining. Guedpfszdb Nmsx Aaxoh Why use expensive and complex CNC machines with complicated standard CNC controls for these parts, or continue to rely on manual, time-consuming processes such as marking, center punching, and drilling?  No CNC knowledge is required thanks to a user-friendly interface.  There is no easier-to-use CNC milling/drilling machine.  Even with just one hole, the machine is faster than manual operation.  Up to 80% time savings.  Graphical display of the programmed parts on a 21” screen.  Long parts can be fed through using a follow-up program.  Import of DXF and DSTV data directly from the CAD system.  High process and repeatability reliability.  Parts can be programmed after only a few minutes of instruction. Why make it complicated when it can be more efficient? The MDX center is a robust, clearly structured machine with minimal follow-up costs. An investment that pays for itself from the very first component. A cost-reducer for every metalworking company. Our great price for these demo machines, directly from us as the manufacturer in Bavaria: MDX 20: €63,500.00, including delivery MDX 60: €91,000.00, including delivery Validity: while supplies last. Arrange a demonstration appointment in Arnstorf or request our offer.

Condition: excellent (used), Year of construction: 1988, MEM Cobra 2MT Multisaw Gusdpfx Aaomv H Dqoxeh 2 movable couplers hydraulically floating saws 2 motors 30kw cutting height 100mm cutting width 900mm 2 hydraulic pumps 15kW and 7.5kW electronic control 4 line lasers High efficiency weight about 8000 kg

Condition: good (used), Year of construction: 2011, 2x Mobile conveyor systems for unloading trucks/swap bodies, etc. – used: Price per unit, ex works: only €950 (net), including loading! If both systems are purchased, we will add a non-powered roller conveyor! Approx. 4 x 3 m, with feet for easy movement! One system consists of 2 belt conveyors (powered) and a roller conveyor that can be connected/extended. Of course, only one belt conveyor and the roller conveyor can also be used, etc. Manufacturer: SRD Maschinenbau GmbH Type: Mobile conveyor system Year of manufacture: 07.2011 SERIAL NUMBER: 3447 Element width: approx. 80 cm Gsdpfxez Dtino Aaxjuh Belt width: approx. 65 cm Length of belt element: 4.10 m Length of roller conveyor: approx. 5 m Total length when all 3 elements are assembled: approx. 13 m! Roller diameter approx. 5 cm, roller length approx. 60 cm Height: approx. 75 cm Connection values: 400V/50Hz 16A Condition: good Available: immediately Location: Hamburg

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning Gedpfxszr Irco Aaxouh • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Guedpox Dbkcsfx Aaxsh Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: good (used), Rotary unit, rotary device, turning table, turning unit -Roller conveyor length: 850 mm -Rollers: Ø 80-120 mm Guedpfx Aob A Ib Eoaxjh -Roller spacing: 190 mm -Roller width: 220 mm

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. The system layout PDF is shown as a mirror image! Godjxwc E Ijpfx Aaxsuh

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Gusdjynpc Nepfx Aaxoh Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Operating pressure: PN10 Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Condition New – ex stock Godpfxez Slpfj Aaxouh Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Cooling, process water Technical and production installations

Condition: used, Leybold Type: Trivac D 40 B The TRIVAC B series are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is made up of individual parts without sealing elements. These are pinned together to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Gedpfx Aezgbvqoaxeuh Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated plain bearings Minimal air intake High leak tightness (suitable for 4He) Technical data: Product: TRIVAC D 40 B Suction side connection flange: DN 40 ISO-KF Pressure side connection flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection class: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Leybold Type: Trivac D 40 B The TRIVAC B series are oil-sealed rotary vane vacuum pumps. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is made up of individual parts without sealing elements. These parts are pinned together to ensure easy disassembly and assembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Gjdpfozianwex Aaxsuh Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated plain bearings Minimal air swallowing High leak tightness (4He-compatible) Technical data: Product: TRIVAC D 40 B Suction flange: DN 40 ISO-KF Discharge flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10-4 mbar Ultimate total pressure without gas ballast: < 2.0 x 10-3 mbar Ultimate total pressure with gas ballast: < 5.0 x 10-3 mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume: min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.