Used Recirculating Cooling Tower for sale (8,592)

Year of construction: 2002, condition: ready for operation (used), Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Nledpfeui R Smox Ac Ajg

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Nledpfxeyvrvpe Ac Aeg Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Temperatures: -6.7 °C/+35 °C. Speed: 2,950 rpm Refrigerant type: R507. Nledpfx Acoxz Ex Sj Aeg Feel free to contact us for more information!

Year of construction: 2022, condition: like new (used), functionality: fully functional, Description: JACIR Water Cooling Tower RXH-6029-84-N245-370-BR Nlsdpjvzw H Esfx Ac Asg Characteristics: Thermal power: 4610 kW Incoming temperature: 43 °C Outgoing temperature: 30 °C dBa (20 m): 55 Max. H2O flow: 305 m3/hour

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Nodpfx Aeynkbmec Aelg Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Year of construction: 2019, condition: ready for operation (used), An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible. Nledpfx Aov E Ragec Aog

Condition: excellent (used), We offer a professional Hyfra Chilly 08/1-S cooling unit, designed for cooling machines, industrial equipment, lasers, welding machines, and other systems requiring stable liquid temperatures. The unit is fully functional, tested, and ready for operation. During testing, it reaches a temperature of 8.3°C, which confirms the correct operation of the cooling system (as shown in the picture). Nlodszmdtfspfx Ac Aog Technical specifications: * Manufacturer: Hyfra GmbH * Model: Chilly 08/1-S * Year of manufacture: 2006 * Cooling capacity: 890 W (at 37°C) * Refrigerant: R407C * Refrigerant quantity: 0.67 kg * Power supply: 230 V / 50 Hz * Max. current draw: 5.10 A * Connected power: 1.20 kW * Max. operating pressure: 29.5 bar * Max. ambient temperature: +42°C * Unit weight: 49 kg * Weight with water: 67 kg Condition: * Used. * Technically sound. * Normal signs of use visible on the housing. * Equipped with a water filter, liquid level indicator, pressure gauge, and quick couplings. It is ideally suited for industrial applications, laboratories, and anywhere efficient and reliable water cooling is required.

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition Nljdpfeg D H Rusx Ac Aeg

Condition: used, Year of construction: 2017, We are offering for sale our modular sheet metal storage system, the BÖCKELT TOWER, which consists of a total of 98 cassettes. The system is designed for the organized storage of various sheet metal formats and can be inspected while powered up by appointment. Nledsz D U Uxspfx Ac Asg Storage layout: Small format (SF): 18 cassettes Medium format (MF): 18 cassettes plus 8 additional cassettes Large format (LF): 54 cassettes in three grids Total: 98 cassettes The system includes storage management software with an interface for connecting to an ERP system. Storage locations outside the tower can also be managed in the software. This storage system is suitable for sheet metal processing companies that want to manage their material stocks in an organized manner and store sheet metal of various formats in a space-saving way. Price: 59,000 € negotiable, net, ex works Leopoldshöhe. The exact scope of supply, software transfer, as well as disassembly and transport will be determined jointly before the contract is concluded. An inspection in the assembled state is possible by appointment.

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm External diameter 2.250 mm Length conveyor belt 48 m Equipment • drying tower downward Nsdpfx Acod Ert So Aslg • infeed left at the top

Condition: excellent (used), I am offering for sale a professional Unitek Benchmark laboratory chiller/recirculator. This unit is designed for cooling and maintaining a constant temperature of liquids in laboratory systems, measuring devices, lasers, medical equipment, and other systems requiring a cooling circuit. Nsdpjzlutgjfx Ac Aelg The housing is made of coated steel, and the tank is a durable construction resistant to the effects of cooling fluids. Technical data: Manufacturer: Unitek Benchmark Stock No.: 043008 Serial No.: LJ080297F Power supply: 230 V AC Current: 3.1 A 1 phase Frequency: 50/60 Hz Condition: Used. Very good visual condition. Sold in the exact condition as shown in the pictures.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Cooling system for recovering waste heat from machines Nledpfx Ajzyc Disc Asg Includes 6 heating fans. Details available upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 Nljdpjz Dt Spsfx Ac Ajg CALANDER OMIPA Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Nedpfoyf Hlijx Ac Aslg Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: excellent (used), Huber Unichiller 055Tw Recirculating Chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: Unichiller 055Tw Year of manufacture: 2014 Machine type: water-cooled recirculating chiller Temperature range: -10 to +40 °C Cooling capacity at +15 °C: 5.5 kW Offered for sale is a used Huber Unichiller 055Tw with a water-cooled refrigeration unit, recirculating pump, and Pilot ONE touchscreen control. The Unichiller is designed for externally closed temperature control circuits and is suitable for heat removal in industrial and technical processes, for cooling machines and systems, and for applications in laboratories, research, and production. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw Year of manufacture: 2014 Serial number: 203739/14 Temperature range: -10 to +40 °C Temperature stability at -10 °C: 0.5 K Power connection: 400 V / 3~ / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant quantity: 1.0 kg Max. pressure: 25 bar Protection class: IP20 Cooling capacity: at +15 °C: 5.5 kW at 0 °C: 3.0 kW at -10 °C: 1.5 kW Recirculating pump: C3 Max. flow rate: 100 l/min Max. delivery pressure: 6.5 bar Pump connection: G 1 1/4 AG Cooling water connection: G 1/2 AG Min. cooling water differential pressure: 0.6 bar Max. cooling water pressure: 6 bar Min. filling volume: 5.9 l Expansion volume: 7.5 l Control: Pilot ONE controller with 5.7" color touchscreen Internal temperature sensor: Pt100 Connection for external Pt100 sensor Digital interfaces: Ethernet, USB, and RS232 Digital level indicator Dimensions: Njdpozui T Hjfx Ac Aolg Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1450 mm Weight: approx. 168 kg Equipment: Water-cooled refrigeration unit Recirculating pump Pilot ONE touchscreen controller Stainless steel housing Atmospherically open expansion tank Digital level indicator Ethernet, USB and RS232 interfaces Movable unit on castors Process and cooling water connections Shipping data: Weight of the unit: approx. 168 kg Dimensions of the unit: approx. 600 × 600 × 1450 mm Due to its size and weight, the unit will be shipped by freight forwarder. Condition: Used condition with corresponding optical signs of wear. Scope of delivery: 1x Huber Unichiller 055Tw 2x Stainless steel flexible hose Scope of delivery as shown in the pictures. The unit is available for immediate delivery. Inspection possible by appointment. The scope of delivery corresponds to the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Huber Model: 030TW Huber Unichiller 030TW – Recirculating Chiller / Cooling Thermostat For sale is a Huber Unichiller 030TW, a powerful and efficient recirculating chiller suitable for laboratory and industrial applications. This unit is designed for continuous operation, providing consistent cooling performance with high energy efficiency. Features & Functions: - Modern touchscreen control with favorites menu, timer, data logging, and remote control options - Robust, closed cooling system for reliable continuous operation - Environmentally friendly refrigerant - Suitable for ambient temperatures up to +40 °C - Ideal for laboratory, chemical, engineering, and process cooling applications Technical Data: - Temperature range: –20 °C to +40 °C - Temperature stability: ±0.5 K - Cooling capacity: - 3 kW at +15 °C - 2.75 kW at 0 °C - 2 kW at –10 °C - 1 kW at –20 °C - Circulation pump: max. 30 l/min at 4.1 bar - Controller: Pilot ONE touchscreen controller (5.7” color display) - Connections: Ethernet, USB, RS-232, Pt100 - Refrigerant: R449A (CFC and HCFC-free, eco-friendly) - Dimensions (W × D × H): 400 × 440 × 1230 mm - Weight: approx. 137 kg - Condition: used Nledezii T Ajpfx Ac Ajg Scope of delivery: (see photo) - Huber Unichiller 030TW - Power cable (Technical data and specifications subject to change and errors excepted!) Please do not hesitate to contact us for further questions by phone.

Year of construction: 2018, operating hours: 350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: SPZ6M, COMPLETE EPS PRODUCTION LINE – FANGYUAN / ICI SIXEN – 2018 Complete EPS production installation suitable for moulded EPS products, including pre-expansion, shape moulding, insert/in-mould capability, storage silos, cooling-water system and steam-generation equipment. The line was purchased new in 2018 and has had relatively limited use. It is currently installed and can be inspected before dismantling. MAIN EQUIPMENT INCLUDED FANGYUAN SPJ90A BATCH PRE-EXPANDER Automatic batch EPS pre-expander with density control, dryer and conveying system. • Expansion chamber: Ø900 mm • Density range: approx. 12–90 g/l • Capacity: up to approx. 720 kg/h depending on density • Steam pressure: 0.6–0.8 MPa • Connected load: 16.75 kW • Typical cycle: approx. 60–70 sec • Suitable for white and grey EPS • Approx. 16,000 kg total EPS processed • Approx. 800 production cycles FANGYUAN SPZ6M AUTOMATIC SHAPE MOULDING MACHINE Special configuration for moulded products with inserts / in-mould applications. • 6 positions per cycle • Twin steam chamber • Moving twin mould system • In-mould capability • Maximum moulding area: 720 × 1270 mm • Max. individual position: 330 × 250 mm for 6 positions • Max. depth: 180 mm • Cycle time: approx. 100–150 sec • Connected load: 13.5 kW • Machine weight: approx. 6,000 kg • Overall dimensions: approx. 5000 × 5100 × 3700 mm • Schneider touchscreen / Mitsubishi PLC • Approx. 350 total operating hours FANGYUAN SPZ80K AUTOMATIC EPS SHAPE MOULDING MACHINE WITH VACUUM Originally supplied as SPZ900K. • Moulding area: 840 × 720 mm • Up to 4 individual mould positions • Steam pressure: 6–8 bar • Steam consumption: approx. 6 kg/cycle • Compressed air: 1.2 m³/cycle • Cooling water: 40–120 L/cycle • Connected load: 10.6 kW • Approx. dimensions: 4500 × 1640 × 2700 mm • Approx. weight: 4,000 kg • Approx. 53,300 recorded machine cycles EPS STORAGE SYSTEM • 6 × approx. 25 m³ silos • Approx. 150 m³ total storage capacity COOLING-WATER SYSTEM • Cooling tower approx. 100 m³/h • 1 low-pressure + 2 high-pressure pumps • Fangyuan DN150 stainless-steel water filter STEAM-GENERATION SYSTEM A complete European steam-generation system is potentially available with the installation, including ICI SIXEN 500 kg/h steam generator, Riello natural-gas burner and related auxiliaries. The exact steam-system scope included in the final sale can be agreed with the buyer, as some components may be retained depending on the final configuration. OTHER INFORMATION • Year: 2018 • CE equipment Nodpsz A Dxkofx Ac Aolg • Manuals and technical documentation available • Photos and videos available • Inspection possible before dismantling • Preference for sale as a complete line • Dismantling, loading, transport and reinstallation can be discussed separately • Moulds are not included unless specifically agreed A detailed PDF with the complete technical description and equipment specification has been uploaded in the Documents section of this listing. Estimated equivalent replacement cost today: approximately EUR 330,000–380,000

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 units of recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, available for immediate delivery. - Temperature 200°C, can be increased to 250°C! - Charging car, 5 units available, modification on request. - Homogeneous temperature distribution of +/- 10°C. - Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm - External dimensions (W x D x H): 4850 x 1705 x 3880 mm - Usable volume: 11.6 m³ - Control system: S!MPAC with touch panel - Program execution with a good sensor as a cascade control system - Temperature limiter - Signal tower - Directly accessible, with grid rails - Exhaust air volume flow: 140 m³/min - Electromagnetic door locking system - Rated power: 180 kW - Connection power: 241 kW!! - Weight: approx. 3500 kg - Documentation, CE declaration of conformity We would be pleased to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Nsdpjy Tkfwsfx Ac Aslg Furnace, Oven, Furnaces, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Curing oven, Post-curing of liquid crystal windows, CFRP support structure, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, immediately available -Temperature 200°C, increase to 250°C possible upon request Njdpfx Acey Avqwe Aolg -Charging car, 5 units available, modification possible upon request -Homogeneous temperature distribution of +/- 10 °C -Internal dimensions W x D x H: 3750 x 1400 x 2300 mm -External dimensions W x D x H: 4850 x 1705 x 3880 mm -Usable volume 11.6 m³ -Control system S!MPAC with touch panel -Program execution with good sensor as cascade control -Temperature limiter -Signal tower -Directly accessible, with grid rails -Exhaust air volume flow 140 m³/min -Electromagnetic door lock -Rated power 180 KW -Connection 241 KW!!! -Weight approx. 3500 kg -Documentation, CE declaration of conformity We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Ovens, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Fusing, Postcuring, Post-curing of liquid crystal windows, CFRP support structures, CFRP support structure, Curing oven, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: excellent (used), Riedel Type: PC 251.1L4WE.I Riedel Process Chiller PC 251.1L4WE.I water-cooled – 25.6 kW – 400 V For sale is an industrial liquid/process chiller from Riedel Kooling, type PC 251.1L4WE.I. The unit is water-cooled (WE) and designed for precise, reliable cooling tasks in industrial applications. Important note: This is not an air-cooled unit. Operation requires an external cooling water circuit (e.g. dry cooler, cooling tower, or building's chilled water system). Additional information: Ideal for machine cooling, process cooling, industrial applications Technical data: Manufacturer: Riedel Kooling Type: PC 251.1L4WE.I Year of manufacture: 2013 Cooling type: water-cooled Refrigerant: R407C Cooling capacity (net): approx. 25.6 kW Temperature range of cooling medium: approx. +12 °C to +20 °C Setpoint tolerance: ±2 / ±1 / ±0.5 K Pump pressure: 3 bar (optional 5 bar) Nominal flow rate: approx. 3.6 m³/h Tank volume: approx. 200 liters Electrical data: Power supply: 3 × 400 V Frequency: 50 Hz Nlsdpfozix Najx Ac Aeg Phases: 3-phase Rated operating current: approx. 14.6 A Power consumption: approx. 10.3 kW (with 3-bar pump) Protection class: IP54 Dimensions & weight: Dimensions (W × H × D): approx. 1,872 × 2,005 × 874 mm Weight (net): approx. 390 kg Condition: used Scope of delivery: (see photo) (Specifications and information subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Nodpfx Acoyw Rzao Aolg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, This listing is for the Julabo FL601 Recirculating Cooler/Chiller The unit is in full working condition and is ready for immediate use The Julabo FL601 is a recirculating chiller engineered for routine cooling applications in laboratories and process environments. Designed for space-saving integration, energy efficiency, and ease of operation, the FL601 delivers precision temperature control with an extensive range of safety and connectivity features. Performance & Control Temperature Range: −20 °C to +40 °C Temperature Stability: ±0.5 °C via microprocessor PID control Cooling Capacity: Up to 600 W at +20 °C Pump Flow Rate: Up to 23 L/min at 1 bar Return Line Temp Limit: +80 °C The FL601 features reliable PID temperature control, making it suitable for continuous operation in demanding environments such as analytical instrumentation, rotary evaporators, and closed-loop process cooling. Design & Ergonomics The FL601 emphasizes ease of use and maintenance: Splash-proof keypad with large, bright LED display Accessible top-mounted filling port with lift-up cover Second hinged document tray for the user manual or install documents Removable front venting grid for quick cleaning of the condenser Front-facing drain tap for easy fluid replacement Integrated stainless steel bath tank with level indicator Compact footprint with front and rear ventilation only — no side vents — allowing side-by-side placement with other devices Smart Features & Connectivity RS232 interface for PC/lab system connectivity Potential-free alarm output (max. 30 VA) for external device integration IP21-rated housing (IEC 60529) for splash protection Optical and audible low-level alarm system for added safety Key Advantages at a Glance Feature Benefit Microprocessor PID control Stable, accurate temperature regulation Front-facing vents Space-saving design; units can be placed side-by-side Easy access filling & draining- Reduces downtime for maintenance Integrated stainless steel bath tank Corrosion-resistant and durable Audible/visual alarms Ensures safe operation and early fault detection RS232 & alarm contact Nlodpfx Aoxhf A Dsc Aog Ready for system automation and remote monitoring Quiet operation (~55 dBA) Suitable for sensitive lab environments Robust construction (~48 kg) Long-lasting performance in daily use Common Applications Rotary evaporators Refractometers Spectrophotometers Distillation units Jacketed reactors Heat exchangers Laser cooling and OEM equipment support

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Nledpfx Acjzr Ircs Aeg Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, Five Star Refrigeration water-cooled chillers with six cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Nlodpfszz Rfqox Ac Ajg Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers Six towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Nlsdpoydqlqsfx Ac Ajg Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours