Used Raim 360 for sale (3,864)

Condition: used, Technical details: Ledeu Niifopfx Akwsah cutting diameter: 310 mm cutting width: 360 mm total power requirement: ca. 1,8 kW Miter cutting possible Workpiece clamping hydraulic bracket lowering hydraulic incl. roller conveyor entrance approx. 2100mm and exit approx. 2700mm *

Condition: used, power: 360 kW (489.46 HP), Price: Make a serious offer. Iveco Stralis 360 EEV – 32-ton equipment carrier – 17-ton payload – winch IVECO STRALIS 360 EEV – 2013 580,000 km, mileage increasing. GVWR: 32 tons Payload: approximately 17 tons 360 hp engine Equipment carrier platform: 9.30 m x 2.52 m Hydraulic winch with remote control, 8 tons capacity 2 seats Recent technical inspection, valid until 09/01/2026 (clean pass) Maintenance history available Laodpfez Tdi Ejx Akwjh Truck has been regularly serviced and maintained, with available records. The history shows numerous repairs and maintenance performed over the last 4 years: braking system, tires, gearbox, cooling system, turbo, clutch, sensors, AdBlue/NOx system, electrical system, and winch… No additional costs expected. Truck in good overall condition. Solid platform, no perforations. Some surface rust. Price: Make a serious offer – Available immediately.

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Ledpfx Aez Tf Enskweah Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply.

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - track width: 360mm - roller width: 350mm - max. disc diameter: 350mm - disc bore diameter: 80mm - max. cutting height: 120mm - table dimensions: 2040x1220mm From above: - pawls - toothed feed roller - pawls - saw mandrel - sliding, pressure roller From below: - rollers in front of the table, 2 pcs - guide - pawls - track - central track lubrication - electric saw mandrel lifting - electric body lifting - stepless feed speed adjustment - extraction nozzle diameter: 140mm, 160mm - main motor: 30kW - overall dimensions (L/W/H): 2600x2300x1850mm - weight: approximately 4000kg ADVANTAGES - Czech production - used multi-blade saw - very good condition Net price: 30900 PLN Net price: 7186 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) Lasdpfxjzulzmj Akweh

Condition: good (used), Year of construction: 2011, operating hours: 46,500 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 3,600 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, nominal power (apparent): 130 kVA, controller manufacturer: Siemens, controller model: 840SE, workpiece length (max.): 3,600 mm, workpiece width (max.): 1,100 mm, workpiece diameter (max.): 1,100 mm, workpiece weight (max.): 5,000 kg, total height: 3,042 mm, total length: 9,280 mm, total width: 4,608 mm, table width: 1,100 mm, table length: 4,200 mm, table load: 5,000 kg, rotary table diameter: 1,050 mm, rotational speed (max.): 50 rpm, overall weight: 32,050 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 21,500 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 120, mount diameter: 1,050 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMF 360 linear, manufactured in 2011, with Siemens 840D Solutionline control 120-position tool changer HSK 63 tool interface Spindle speed 18,000 rpm Chip conveyor Coolant system, 1000 liters, 80/40 bar Ljdpfx Aez Riy Rokweah Work area enclosure 3D probe, Heidenhain Blum laser Handwheel Air blow through the spindle Coolant nozzle Automatic doors A-axis, Lehman EA 420 Hydraulic clamping system for rotary table Robot interface Oil and emulsion mist separator

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: S36-1969, laser power: 60 W, type of cooling: air, total width: 830 mm, total height: 1,055 mm, total length: 1,221 mm, overall weight: 300 kg, We present the Trotec Speedy 360 CO2 laser with a power output of 60 watts, manufactured in October 2020. Equipped with Sonar autofocus technology, this laser is ready for immediate use and is fully functional. The scope of delivery includes: - Trotec Speedy 360 60-watt air-cooled laser and Atmos Duo plus HEPA 230V - Laptop including Win10 and CorelDraw - Aluminum grid cutting table - with pump for air supply - Rulers in mm - with masking tape - Extraction nozzle 75mm - Connection cable Lajdpfxezzkg Io Akwjh Technical data: - Working area: 813 mm x 508 mm - Dimensions: 1221 x 830 x 1055 mm - Laser power: CO2 60 watts - Laser source: CO2 laser, digitally controlled, air-cooled - Air assist: Improves cutting results by blowing away heat and gases - Movable starting point: Enables precise selection of the starting position for laser engraving/laser cutting - Resolution: User-selectable from 100 to 1000 dpi - Connection: USB interface

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 3600/1100/900 mm Tool holder : HSK 63 In General: Year of manufacture:2012 Control system:Heidenhain iTNC 530 Travel range X/Y/Z:3,600/1,100/900 mm Speed:18,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:18,000 rpm Max. power:35 kW Max. torque:130 Nm Lajdpfx Akoz S S Elowsh Tool holder:HSK 63 NC swivel head: B-axis:+/- 100° Resolution:0.001° NC rotary table: C-axis:360° Resolution:0.001° Clamping surface:1,050 mm Max. table load:1,200 kg Fixed table: Clamping area:4,200 x 1,100 mm Max. table load:1,200 kg/m Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Positioning sensors:Direct scales X-Axis:Direct drive Chip removal:Chip conveyor Coolant supply:Internal cooling system, 40 bar Tool measurement:LASER Workpiece measurement:Touch probe Set-up:Electronic handwheel

Year of construction: 1990, condition: used, Cutting angle: 90°-45°, operating hours: approx. 4420h. Equipped with automatic material feed as well as roller conveyors on the left and right with ball-bearing rollers and storage compartments beneath the roller conveyors for short material sections. Including spare saw blades. The coolant was changed approx. 5 operating hours ago. An on-site inspection is possible. Lajdpezx Ehhefx Akweh

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: S36-0330, laser power: 80 W, Trotec Speedy 360 – CO₂ laser with a brand-new laser tube, fully serviced Invest instead of repairing – this Trotec Speedy 360 is ready for immediate use and impresses with its exceptionally well-maintained condition and a newly installed laser tube. For sale is a Trotec Speedy 360 CO₂ laser engraving and cutting system, which has only been used in a professional setting and has always been carefully maintained. The machine is in very good condition, both technically and visually, and is immediately available for productive use. A new laser tube was installed before the sale. This means you not only get a proven industrial laser but also benefit from one of the most valuable wear parts in new condition. This significantly reduces the investment risk and enables a direct start to production without additional follow-up costs. Proven Trotec quality The Speedy 360 has been one of the most powerful and reliable CO₂ laser systems in its class for years. Its high processing speed, precise positioning, and excellent repeatability make it the first choice for professional users in industry, crafts, and advertising technology. Whether for individual production or series production – the Speedy 360 consistently delivers precise results. Versatile applications The machine is suitable, among other things, for processing: Ledpfx Akozlb Abewjah ✔ Acrylic ✔ Wood and plywood ✔ MDF ✔ Leather ✔ Paper and cardboard ✔ Rubber ✔ Textiles ✔ Plastics ✔ Glass (engraving) ✔ Coated metals (marking) This makes the laser ideal for companies in the fields of advertising technology, sign manufacturing, model making, personalization, industrial marking, or prototype construction. Your advantages at a glance ✔ New laser tube – ready for immediate use ✔ Very well-maintained overall condition ✔ Precise engraving and cutting quality ✔ High working speed ✔ Proven Trotec technology ✔ Easy operation with JobControl ✔ Reliable industrial machine with high value retention Inspection is highly recommended We invite you to personally inspect the excellent condition of the machine. An inspection and a test run can be arranged at any time by appointment.

Condition: good (used), Year of construction: 1995, operating hours: 6,420 h, load capacity: 3,000 kg, lifting height: 3,600 mm, fuel type: diesel, mast type: duplex, construction height: 2,400 mm, Mitsubishi FD30 Duplo 360 Sideshift Diesel 1995 A video can be sent via WhatsApp. We have a continuous stock; see our website. Ljdpfx Aj Adr E Ujkwjah Prices are quoted ex-Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: not inspected (used), Year of construction: 1999, cutting width (max.): 360 mm, overall weight: 2,500 kg, cutting capacity, maximum diameter 360 mm roller tables chip conveyor weight 2500 kg Lodpfxszbrnbe Akwsah

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 300 h, Equipment: ABS, The printer is in almost new condition and has been used very little. Lasdsz Ep Dkspfx Akwoh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2020 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: d 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 Tool holder: HSK-A 63 Feeds: Rapid traverse (x/y/z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swivel milling head (B-axis) - Integrated rotary table, arranged on the left, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter, 600 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rotary coupling for spindle - Flushing gun for chip flushing - 2x oil and emulsion mist separators - Blow-off air through the spindle center - Infrared measuring probe, Heidenhain TS 460 (if available) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann dividing head RW-NC 300 (dividing head not included) - Alternating operation - Tool breakage monitoring TRS2 - Tracy surface interpolation Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale! Lasdpfjz A Ap Iox Akwsh

Year of construction: 2017, condition: used, Cooling unit Manufacturer: Kjellberg Type: KWE 360 Year of manufacture: 2017 Lasdpsz Upyljfx Akwsh for Kjellberg HiFocus 280/360/440 power source 191026

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Pre-bending capacity X/Y: 3000mm/15mm. Bending width: 3000mm. Reference material: Steel. Tensile strength of the reference material: 45-47kp/mm². Yield strength of the reference material: 25-27kp/mm². Equipped with hydraulically adjustable bottom rolls, hydraulic drop-end, plate support with vertical guide mast and support arm, and machine-mounted push-button control panel. Inspection possible by arrangement. Lajdpfx Ao Ad Nrlekwjh

Condition: excellent (used), functionality: fully functional, BANDSAW MACC MODEL: SPECIAL 360 A BELT DIMENSIONS: 3010X25X0.9 THICKNESS: 1.2 mm USED, OPERATIONAL MACHINE INTERNAL CODE: SVR Lodozz Sk Ispfx Akwoah

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Lsdpfozv Eglox Akwoah Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Condition: good (used), Akebono OB-360 Banding Machine This machine is in very good condition and has been serviced. One of the most recognized machines in the world. The latest model. The machine operates in manual or automatic mode. Laodpfx Akezyz Dnewoh After inserting the material, the machine wraps it with tape, compresses, and seals it to create an elegant package. Ideal for wrapping business cards, flyers, calendars, and other materials. Can be used with paper or foil tape. Technical specifications: Tape width: 29 mm Cycle speed: 28 cycles/min Frame dimensions: 420 x 210 mm Length: unlimited Weight: 40 kg. Made in Japan.

Condition: used, functionality: fully functional, color channels: 1, resolution (max.): 1,200 dpi, paper weight (min.): 60 g/m², paper weight (max.): 110 g/m², paper width (min.): 297 mm, paper width (max.): 914 mm, paper height (min.): 419 mm, paper height (max.): 176 mm, number of feeding trays: 2, total length: 1,720 mm, total width: 800 mm, total height: 1,470 mm, input current: 6 A, input voltage: 230 V, Océ PlotWave 360 – Professional A0 multifunction plotter with color scanner and Estefold folder professional black and white printing; maximum format A0 / 36" / 914 mm; speed up to 6 A1 prints per minute; Lodpfezy Em Hex Akwoah print resolution up to 600 × 1200 dpi; large-format CIS color scanner; scanner resolution up to 600 × 600 dpi; scanning of originals up to 914 mm wide; scan formats: PDF, PDF/A, TIFF, and JPEG; Océ ClearConnect touchscreen display; Ethernet network connection; controller with 4 GB RAM and 500 GB hard disk; roll paper feed; complete with automatic Estefold folder for folding drawings, technical plans, and projects; also included in the sale are rolls of printing paper, provided as standard equipment/consumables.

Condition: refurbished (used), functionality: fully functional, 1. Machine specifications: * Travel ranges - Table longitudinal travel (x) 1190 mm - Cross slide transverse travel (y) 530 mm - Column vertical travel (z) 540 mm * Table surface area 480 x 1600 mm * T-slots 18 mm at 80 mm spacing 5 * Table load capacity 1500 kg * Tool holder SK 50 DIN 2080 * Diameter in the front bearing 100 mm * Milling spindle drive power 15 kW * Speed range 35.5 ... 1800 min-1 * Number of speeds 18 * Step ratio, automatic shifting 1.25 Lodpfez H Ttxox Akwsah * Max. torque 2200 Nm * Feeds 3 ... 2000 mm/min * Rapid traverse longitudinal and transverse 10000 mm/min vertical 5000 mm/min * Coolant system 40 l/min * CNC control TNC 360 Heidenhain, feed motors SIEMENS * Connected load 35 kW * Machine weight 5400 kg 2. Technical condition The machine was only used in production until May 2009!!! Due to the overhaul, the machine meets the acceptance conditions for new machines. All guideways have been re-scraped. Ball screw drive and measuring systems in all axes have been replaced. All motors have been checked and repaired in the authorized workshop. The milling spindle has been checked and repainted. A milling head can be provided for vertical machining. 3. Warranty: last inspection 04/2026 3 months 4. Prices * Machine 59,000.00 € * Assembly/Commissioning 5,250.00 € 5. Delivery conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding value-added tax. We reserve the right to sell the machine in the meantime. Our terms and conditions of delivery and service apply. * Payment terms: 30% down payment upon order 60% upon delivery 10% after handover * Delivery date: ex warehouse

Condition: used, Year of construction: 2017, overall weight: 120 kg, Equipment: documentation/manual, ABB IRB 360-8/1130 FlexPicker Manufacturer: ABB Model: IRB 360-8/1130 FlexPicker Robot type: Delta/Parallel robot, 4-axis Design: High-speed pick-and-place industrial robot Payload: up to 8 kg Reach: approx. 1,130 mm Application area: Pick & Place, sorting, packaging, assembly, and material handling Controller: ABB IRC5 Mounting: Ceiling mounting Drives: Servo motors Axes: 4 Protection class: depends on the specific design Application areas: Food industry, packaging technology, pharmaceutical industry, consumer goods industry, and general automation Description: 1 x ABB FlexPicker robot IRB360-8/1130 1 x IRC5 Single 1 x Handheld control panel FlexPendant DSQC679 1 x Gripper, Schunk GmbH 1 x Various spare parts Ledpfx Akez Euakjweah The robot is disassembled. An inspection in Karlsruhe is possible. Description for the advertisement: The ABB IRB 360-8/1130 FlexPicker is a fast, 4-axis delta industrial robot for automated pick-and-place applications. The robot is designed for high cycle rates and precise handling and is particularly suitable for sorting, packaging, assembly, and transferring products. The design with a payload of up to 8 kg and a working range of approx. 1,130 mm enables its use in various automated production facilities.

Condition: used, Year of construction: 1991, functionality: fully functional, Behringer bandsaw automat Model HBP 360 A Year : 1991 Capacity round : 360 mm. Capacity square : 360 x 360 mm. Cutting speed : 20-130 m. / min. Max. feed pr. stroke : 600 mm. Band size : 5400 x 41 x 1,3 mm. Lasdpfxozzpwfe Akwjh Power : 7,5 kW Well maintained machine Delivery time 4 weeks

Condition: used, Year of construction: 1998, Used KASTO HBA 360/600 U horizontal band saw for sale Condition: good, used Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: HBA 360/600 U Year of manufacture: 1998 Robust, industrial-grade KASTO horizontal band saw designed for cutting metal stock. The machine is sold with a roller conveyor and a new Kyocera cutting blade. Technical specifications Max. cutting diameter for round stock: approx. Ø 360 mm Max. cutting dimensions for rectangular stock: approx. 360 × 600 mm Weight: approx. 1800 kg Power supply: 400 V / 50 Hz / 3 phases Power according to machine data plate: 10 kW Lodpfez Hixdox Akwsah Rated current: 35 A Included accessories Roller conveyor New Kyocera cutting blade Additional information The saw is in good technical condition. There is a minor issue: sometimes the workpiece clamping function needs to be activated a second time for the clamps to properly secure the material. The machine is currently disconnected and ready for transport. The seller can assist with loading the machine onto a truck, but does not assume responsibility for any damage that may occur during loading. The machine is sold as is, without any warranty. If you have any further questions or require additional information, please do not hesitate to ask. Text or technical data may contain errors. The buyer must verify the technical data and specifications before purchasing the machine.

Condition: good (used), Year of construction: 2011, operating hours: 16,640 h, load capacity: 1,600 kg, lifting height: 3,600 mm, fuel type: electric, mast type: duplex, construction height: 2,250 mm, Year of construction: 2011 Lodpfxoz R Imvj Akwsah Field of application: Internal logistics

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, load capacity: 360 kg, arm reach: 2,826 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR360-2 Payload: 360 kg Reach in mm : 2826 mm Condition: REFURBISHED Year: 2006 Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets Shipment expenses are not included in the price PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. Laedpfxezpxu Nj Akwoh • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 400 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. ( Source: KUKA )