Used Rafamet Wheel Lathe for sale (24,747)

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Kdsdpehvml Ijfx Adqer Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: used, Year of construction: 1985, railwidht: from 1430mm - 1520mm Kdedpjwzg Tgsfx Adqjr diameter range: ø700 to ø1120mm

Year of construction: 1980, condition: excellent (used), Widht: 1000-1676 mm Axis lenght: 1327-2700 mm Kodpfx Adsnbfcreqodr Diameter of the wheels: 460-1120 mm Axle diameter: 70-200 XAD 112, more information on request

Condition: excellent (used), Polish production Rafamet lathe for sale, efficient machine in good condition after employing electrics and management by Rafamet. The machine worked until the very end, currently disassembled loading machine. Technical data Track width (for normal version) - 1435 mm Track width (for special execution) - 1524 or 1676 mm Wheel diameter - 800-1500 mm The minimum distance between the axes of the sets - 1500 mm Maximum axle clamping on the rails - 25 tons Rotation of drive rollers (stepless) - 15-82 rpm Circumferential speed of drive rollers - 7.5-43 mm/min Feeds of copying supports (stepless) - 0.95-34 mm / min Travel of external jacks - 540 mm/min Travel of hydraulic jacks - 410 mm/min Slide travel - 2300 mm/min Ksdpfx Aomidwcodqedr Sliding rail travel - 9000 mm/min Weight including standard equipment 25 200 kg Installed power 83kW (after modernization 58kW)

Year of construction: 1997, condition: like new (used), UNDER FLOOR WHEEL LATHE RAFAMET UGB 150 Underground lathe for reprofiling train wheels without necessary disassembly Truck guage: 1435 mm Range of wheel tread diameters: 600 to 1,500 mm Maximum axle load: 250 kN Minimum wheel base: 1,700 mm Machine is from 1997 Dismantled, ready for shipment. Kedpeg R Syhefx Adqedr

Year of construction: 1977, condition: used, turning diameter 700-1500 mm clamping length 3000 mm guage width 1676 mm Control weight of the machine ca. 60 t Rafamet UBC 150 wheelset lathe for railway wheelsets Serial No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Gauge of the wheelsets to be machined in standard version: 1435mm track widths: 1435mm , 1524mm , 1676mm Length of wheelsets to be machined: 1640-3000mm Running diameter of the wheelset: 700-1500mm Driving diameter: 350-1350mm Width of the wheelset tyre: up to 140mm Fork dimensions of the wheelset lathe_ 8700x360x3250mm Total installed power: 172kW Weight of the machine: 59200kg Kjdeuddgljpfx Adqjdr Speed of the setting movement Lifting and centring device: 2500 mm/min. Headstocks: 1320 mm/min. Quills: 550mm/min. Supports in the longitudinal direction: 1300 mm/min.

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm max turning diam 1100mm range of turning diam 460-1250mm Kdjdpfx Aek Dz N Iedqer

Year of construction: 1989, condition: used, functionality: fully functional, Lot of 13 used machine tools: Lathes, milling machines, radial drill, grinding machine, grinding wheel. TRANSPORT TO BE AGREED UPON DURING PURCHASE OR QUOTATION: - MT180 TRIFASE Lathe - INGERS 175 three-phase Lathe - LEGOR 300 three-phase - ANSELMI 180 three-phase Lathe - Idroming 600 (DRM) - Grinding machine - BERGONZI FS 870 Radial drill - FRESA Prvomajska 1 - FRESA Prvomajska 2 - SERRMAC RAG 25/L three-phase pillar drill - ITALERI three-phase pillar drill - BIMARK MOD. 30 three-phase pillar drill - Fratelli Rosa Milano three-phase pillar drill - Salmoiraghi three-phase grinding wheel Kdjdpfx Aezg E Hyedqjr Technical details for each machine are shown in the photos. Transport costs to be determined during the quotation process. For any further information, please do not hesitate to contact us. Machines intended for countries outside the EU. ----- Price: 12,900 EUR, VAT excluded + TRANSPORT COSTS TO BE BORNE BY THE PURCHASER -----

Condition: new, Year of construction: 2026, CNC Vertical Wheel Lathe for Alloy and Steel Wheel Refurbishment A modern CNC vertical lathe designed specifically for the professional refurbishment of alloy and steel wheels. The machine enables fast and precise restoration of the original factory finish, whether the wheel has suffered mechanical damage, corrosion, or welding repairs. Its vertical design provides the operator with full control over the machining process, while the rigid, heavy-duty base ensures exceptional accuracy even when machining large wheels. It is the ideal solution for tire service centers, wheel refurbishment companies, automotive detailing businesses, and small-batch manufacturing operations. Unlike a conventional universal lathe adapted for wheel machining, this machine has been engineered exclusively for wheel refurbishment. This provides several key advantages: Shorter machining time per wheel Minimal cutting tool wear Superior surface finish without chatter marks or waviness Fast and easy operator training The finished surface matches the original factory diamond-cut appearance, allowing workshops to offer premium refurbishment services while significantly increasing profitability. Key Benefits Suitable for passenger car and light commercial vehicle wheels High-precision reproduction of the original diamond-cut finish Quick workpiece setup and intuitive operation Consistent, repeatable machining results on every wheel Heavy, vibration-resistant machine construction Increased profitability of wheel refurbishment services Technical Specifications Parameter Specification Maximum Turning Diameter 700 mm Maximum Wheel Diameter 660 mm Maximum Chuck Diameter 670 mm Spindle Speed 50–1200 rpm Feed Rate 0.1–1000 mm/min Vertical Travel (Z Axis) 550 mm Kedpfx Adjzpww Aeqedr Horizontal Travel (X Axis) ±330 mm Rapid Traverse (X Axis) 3000 mm/min Rapid Traverse (Z Axis) 3000 mm/min Tool Size 25 × 25 mm Motor Power 4 kW Machine Weight 1200 kg Overall Dimensions 1300 × 1250 × 1960 mm Applications Removal of curb rash, scratches, and surface damage Wheel preparation for painting or polishing Restoration of diamond-cut decorative surfaces Refurbishment of wheels after straightening and welding Machining of new wheels for low-volume production Equipment (Depending on Configuration) Special wheel chuck Software package with wheel profile optimization Touch probe measurement system Automatic lubrication system 4-position tool turret Operator training and technical support Full CE compliance

Condition: new, Year of construction: 2026, CNC Lathe for Alloy Wheel Refurbishment This advanced CNC lathe is an indispensable solution for the refurbishment and precision machining of alloy wheels. It enables professional surface finishing, removal of damage, and restoration of wheels to a like-new appearance. The machine is equipped with an advanced CNC control system that allows fast programming of machining cycles while ensuring outstanding repeatability and excellent surface quality. Its compact footprint and ergonomic design make it easy to integrate into any workshop environment. It is the ideal choice for professionals seeking a productive, reliable, and highly accurate solution for alloy wheel refurbishment. Kedpfxezpwzhj Adqjdr Technical Specifications Parameter Specification Maximum Swing Over Bed 710 mm Maximum Wheel Diameter 28 in Spindle Nose A2-6 Spindle Bore 60 mm Chuck Manual Maximum Spindle Speed 1,500 rpm Motor Power (S1) 4.5 kW Equipment (Depending on Configuration) G-code CNC control Special wheel chuck for wheels up to 28 inches Wheel profile optimization software package Touch probe measurement system Automatic lubrication system 4-position tool turret Operator training and technical support Full CE compliance Available CNC Control Systems Siemens SINUMERIK 808D Siemens SINUMERIK 828D Fanuc Oi-TF Professional CNC Control Systems The CNC Alloy Wheel Refurbishment Lathe is available with professional control systems from leading manufacturers including Siemens, Fanuc, and GSK. These systems provide exceptional precision, reliability, and flexibility, making them suitable for both simple machining operations and complex production processes. Siemens SINUMERIK 808D An economical CNC control designed for entry-level CNC lathes and machining centers, ideal for small and medium-sized workshops. Key Features Intuitive graphical interface with Teach-In programming for fast operator training Reliable industrial design resistant to dust and moisture Easy integration with Siemens servo drive systems Low power consumption and minimal maintenance requirements Cost-effective solution for first-time CNC users Siemens SINUMERIK 808 Advanced A modern CNC controller offering enhanced functionality while maintaining simple operation. Benefits User-friendly interface suitable for smaller workshops Rugged industrial construction Cost-effective solution for standard turning and milling applications Improved performance and programming flexibility Siemens SINUMERIK 828D A high-performance CNC system designed for demanding machining applications. Key Features Powerful processor for dynamic machining operations Advanced turning cycles and optimized tool paths CAD/CAM integration for streamlined production Expandable architecture supporting additional machine functions Excellent performance for both prototype and production environments Fanuc Oi-TF One of the world's most trusted CNC control systems, recognized for its reliability and precision. Key Features Outstanding stability during continuous production Advanced turning cycles for threading, grooving, and precision machining Fast and intuitive programming interface Proven reliability with low maintenance requirements Ideal for high-volume industrial applications

Condition: used, Lang Centre Lathe, Approx 7.6m Between Centres x 800mm Swing Over Bed, 400mm Swing Over Saddle, Fitted with 4 Jaw Chuck (750mm Diameter) , 2 Fixed Steadies Kdsdpfxozvrn No Adqer

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 712 mm, turning length: 930 mm, turning diameter: 712 mm, travel distance X-axis: 450 mm, travel distance Z-axis: 930 mm, spindle motor power: 7,500 W, rotational speed (min.): 40 rpm, rotational speed (max.): 1,800 rpm, total height: 2,000 mm, total length: 2,420 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 3,200 kg, Equipment: documentation/manual, Special Offer – 5% Discount Available! CNC Wheel Repair Lathe MTP28 The MTP28 CNC Wheel Repair Lathe is a professional machine designed for the refurbishment, repair, and precision machining of alloy wheels from 12" to 28". Equipped with an advanced CNC control system, it delivers outstanding machining accuracy, excellent surface finish, and consistent repeatability. It is the ideal solution for wheel refurbishment specialists, automotive workshops, and alloy wheel repair centers. The machine features an automatic wheel probing system that quickly scans the wheel profile and simplifies programming, significantly reducing setup time and increasing productivity. Its intuitive 15-inch touchscreen CNC controller makes operation simple and efficient. A fully enclosed working area, rigid machine construction, and powerful 7.5 kW spindle motor ensure maximum safety, reliability, and long service life, even during intensive daily operation. Standard Equipment * CNC control system with 15-inch touchscreen * Automatic wheel probing system with dedicated software * Fully enclosed safety enclosure * 12-inch 3-jaw chuck Technical Specifications * Wheel size range: 12"–28" * Maximum wheel diameter: 712 mm Kodpfx Aezf Immedqodr * X-axis travel: 450 mm * Z-axis travel: 930 mm * Chuck: 12-inch 3-jaw chuck * Spindle motor power: 7.5 kW * Spindle speed range: 40–1800 rpm * Rapid traverse (X-axis): 5 m/min * Rapid traverse (Z-axis): 7 m/min * Cutting feed: 0–200 mm/min * Bed width: 400 mm * Machine dimensions: 2420 × 1700 × 2000 mm * Machine weight: 3200 kg Key Features * Professional alloy wheel refurbishment and repair * High machining accuracy and repeatability * Automatic wheel surface probing * Suitable for wheels from 12" to 28" * Easy-to-use 15-inch touchscreen CNC control * Heavy-duty industrial construction * Fully enclosed and safe working area * Low operating costs * High productivity and excellent surface finish Transport & Delivery We provide professional transport and delivery throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, properly protected, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements to ensure safe and efficient delivery. Worldwide shipping outside Europe is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery, supplying reliable equipment to customers throughout Europe. We provide expert technical advice, machine configuration, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Kjdpfszfguijx Adqsdr Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Condition: good (used), Year of construction: 1980, Please find below the technical specifications for the RAFAMET vertical lathe, Type KCF 250: General information: Ksdpfx Aszlrg Djdqedr - Year: 1975 - Overhaul/Retrofit: Approximately 2010 - Table diameter: 2500 mm CNC NUM 1060 Technical capabilities (indicative data for this machine segment): - Table diameter: 2500 - Maximum external machining diameter: 2700 - Maximum turning diameter: ~2800 mm - Maximum workpiece height: ~2200 mm - Table load capacity: Up to ~15,000 kg (15 tons)

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm Kdedpfx Asuddcgedqsr control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Ksdpfx Aozav D Dedqsdr Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2023, condition: used, 2023 | Wheel Cleaner WEXC-13 | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Kdedpfsznfdhjx Adqer 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41134 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1987, faceplate diameter 3600 mm swing diameter 4500 mm turning height 1850 mm turning speed range 0,6- 50 U/min weight of the machine ca. 72 t verticale turning machine double coloumn - digital scale Kdodpfeyz Db Uox Adqsr - double coloumn - 2x ram - movable cross slide - extra toolholder (four station) on the side of facing plate

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Kdodpsxdmgvefx Adqsr Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Kedpfx Adoy D E Risqsdr Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. Ksdpfjzul Utex Adqodr TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: excellent (used), Year of construction: 2018, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: KC1811242, turning diameter over cross slide: 325 mm, turning length: 1,285 mm, turning diameter: 570 mm, spindle bore: 80 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 310 mm, travel distance Z-axis: 1,285 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (min.): 1,600 rpm, rotational speed (max.): 40 rpm, total height: 1,700 mm, total length: 3,070 mm, total width: 1,300 mm, quill travel distance: 150 mm, quill diameter: 75 mm, quill stroke: 150 mm, swing diameter over cross slide: 325 mm, turning diameter over bed slide: 570 mm, turning diameter over top slide: 325 mm, type of input current: three-phase, overall weight: 2,560 kg, swing diameter over bed slide: 570 mm, bar passage: 75 mm, chuck outer diameter: 300 mm, swing diameter over top slide: 325 mm, center height: 280 mm, bar diameter (max.): 75 mm, mount diameter: 32 mm, Equipment: documentation/manual, 2018 Dugard Lunan 570MF CNC Lathe – Excellent Condition 📍 Location: Ireland 🔧 Machine Type: CNC Lathe 🛠️ Manufacturer: Dugard 📅 Year of Manufacture: 2018 ⏱️ Machine Hours: Only 2,300 ✅ Condition: Very Good / Fully Functional 💡 Why Choose This Machine? The Dugard Lunan 570MF is a solid, well-built CNC lathe designed for medium to heavy-duty turning applications. With Siemens 828D control, only 2300 working hours, and a complete set of chucks, steadies, and accessories, this machine is ideal for general precision engineering, subcontractors, and educational/training use. It’s well maintained, ready to work, and represents excellent value. Buy a 2018 Dugard Lunan 570MF CNC Lathe in excellent condition. Featuring 570mm swing, Ø80mm spindle bore, 400mm chuck, and 7.5kW power. Available now from Used Machine Tools Ireland. International delivery available. 🧰 Machine Includes: Siemens 828D CNC Control System 320 mm 3-Jaw Chuck 400 mm 4-Jaw Chuck Travelling Steady Fixed Steady Coolant Equipment Tailstock Operator Manuals Selection of Tool Holders & Chuck Jaws 🔹 Technical Specifications Max Swing Diameter Over Bed: Ø570 mm Max Swing Diameter Over Slide: 325 mm Distance Between Centres: 1500 mm Span of X/Z Axis Guide Rails: 420 mm Max Turning Length: 1285 mm Center Height: • To Bed: 280 mm • To Ground: 1170 mm Spindle Bore Diameter: Ø80 mm Bar Capacity: Ø75 mm Spindle End Type: D8 Chuck Size: Ø300 mm or Ø400 mm Spindle Speeds: 3-Speed Manual Ranges: • 40–150 rpm • 130–470 rpm • 450–1600 rpm Taper of Spindle: Metric 90, 1:20 Turret: 4-Position Electric Turret Tool Size: 32 × 32 mm Tailstock: • Quill Diameter: Ø75 mm • Stroke: 150 mm • Taper: MT5 End Bracket: Hand-operated type Screw Model: • X-Axis: FFZD2504-3-P3 • Z-Axis: FFZD4008-5-P3 Rapid Traverse (X/Z): 6 / 10 m/min X-Axis Stroke: 310 mm Minimum Set Unit: 0.001 mm Main Motor Power: 7.5 kW Power of Main Supply: 12.5 kW Net Weight: 2560 kg Dimensions (L×W×H): 3070×1300×1700 mm 💡 Features & Benefits: Robust and versatile CNC lathe ideal for medium to heavy-duty turning High-torque spindle and large bore suitable for tough materials Reliable FANUC control system with user-friendly interface Well maintained and fully serviced – ready to run Ideal for sub-contract machine shops, tool rooms, and general precision engineering 🚚 Delivery Options Available We offer nationwide & International delivery Dugard Lunan 570MF CNC Lathe for sale Used Dugard CNC lathe Ireland 2018 Dugard Lunan CNC lathe CNC lathe Ø570mm swing Large bore CNC lathe used Heavy-duty CNC turning lathe CNC lathe with 80mm spindle bore 4-position turret CNC lathe CNC lathe with tailstock and 12.5kW power supply CNC lathe for shaft turning manual turret CNC lathe industrial CNC lathe for metal turning Kdodpfx Aswv Sx Rodqer Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2026, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data MAXIMUM TURNING DIAMETER 400 mm MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm Kedszp E A Topfx Adqedr METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm dead center MK4 x 2 reduction sleeve MK6/MK4 keys PLEASE NOTE!!! This machine is a returned item; it has bodywork and paintwork damage but is in working order. NO WARRANTY!!!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 863 mm, turning diameter: 431 mm, spindle speed (max.): 3,400 rpm, overall weight: 7,250 kg, chuck outer diameter: 254 mm, Haas SL-30 THE Kdjdpewbd Hqofx Adqer Year 2008 Control Haas Chuck 10” Turning Length 863 mm Turning Ø 431mm Ø above the bed 762 mm Turret 12 station Speed 3400 rpm Length x width x height 4500 x 2300 x 2000 Weight 7250 kg

Condition: excellent (used), Year of construction: 1998, Parallel Lathe WABECO D6000E Between points: 600 mm Maxi Ø on bench: 270 mm Kdjdpszmwptefx Adqer Maxi Ø over saddle: 170 mm Spindle speed: from 45 to 2300 RPM Multifix turret type A Concentric 3-jaws chuck Ø 100 mm (NEW) Year of construction: 1998 (machine very little used) Spindle speed by variator Tailstock CM2 Scale 2 axes EAE type Mikronel 220 L Supplied with one clamp tie rod Accessories: 5 tool holders + different thread wheels Voltage: 220 V mono Dimensions (L x W x H): 1500 x 900 x 1700 mm Weight: approx 200 kg