Used Presona Lp 85 Vh2 for sale (4,662)

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baler Presona LP 85 VH2 with cross tying, year of construction 2018 Technical data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of construction: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Bljdpfoyz Snpsx Alcjh Theoretical throughput: 1,200 cbm/h Throughput at 30–100 kg/cbm: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions of press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from running operation. Technical documentation is available. Please note: All technical data is based on manufacturer’s specifications. We accept no liability for the accuracy of the information provided or for possible errors. The offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Bodpfx Asv T I Evslcelh Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour Bodpfoyrhi Nex Alcolh • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Bjdpfx Aley S Ru Ascelh Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, year of last overhaul: 2026, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned Bodpfjy S Rtlsx Alcelh All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Blsdoy R Npiopfx Alcsh Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. Bodpfoymmmpsx Alcjlh We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: good (used), We offer you here a used shelf connector of the manufacturer Jung Heinrich for sale. Technical data of the shelf connector: Blsdpfed Tt Afsx Alcoh Manufacturer: Jung Heinrich Type: Esmena Included in delivery: 01x shelf connector used material colour: sendzimir galvanized shelf distance: approx. 200 mm L-profile: approx. 85 x 40 mm Weight/pc: approx. 0.519 kg/pc. 04x hexagon head screws, M8 x 20 8.8. 04x hexagon nut, M8 04x washers, M8

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatik Panel PC 677B (AC) 15" Touch DC 24V Industrial PS , SN:VPC3857694 serial no. according to photo ,used - TOP condition100% functional, scope of delivery according to photos Bjdpfx Aoi Edhbolcjlh

Condition: used, mileage: 394,085 km, power: 375 kW (509.86 HP), axle configuration: 4x2, color: green, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2019, Equipment: ABS, EBS, air conditioning, - Braking System For vehicle inquiries, Mr. Seidel is available to assist you (by phone). Mercedes-Benz Actros 1851 LSnRL 4x2 Tractor Unit Axle, narrow wheel mounting track, front axle air suspension, front axle 8.0 t, front axle with cranked design, rear axle, crown wheel 440, hypoid, 13.0 t, rear axle with active lubrication, regulated, axle ratio i = 2.278, electronic brake system with ABS and ASR, electronic air supply unit, medium size, heated, electronic air supply unit, disc brakes on FA and RA, secondary water retarder, condensate monitoring for compressed air system, compressed air reservoir, steel, low brake and electrical connections, frame overhang 1050 mm, wheelbase 3700 mm, step plate above frame, partial cover, access behind cab, left, steering, single circuit, steering assist pump, electronically controlled, front underrun protection (ECE), aluminum, integral rear, rear axle mudguards, 2550 mm vehicle width, 3-piece mudguards with EU spray protection, front spray protection (EU), compressed air connection in cab, driver’s air-suspended comfort seat, co-driver’s function seat, seat backrest release, driver's seat, comfort lower bunk, velour seat covers, curtain across bed(s), sun blind, side, driver’s side, electric stationary air conditioning, automatic climate control, residual heat utilization, hot water auxiliary heater, cab, additional thermal insulation, storage compartment covers, driver and passenger side, drawers under the bed, storage flaps above windscreen, overhead luggage shelf on rear wall, electric lifting roof, battery sensor by Hella, batteries 2 x 12 V/220 Ah, low maintenance, regulated generator 24–30 V/100 A, 12 V/15 A connection for auxiliary consumers, additional 12 V/15 A socket, passenger footwell, 24 V/15 A socket, passenger footwell, night driving light switch, trailer socket 24 V, 15-pin, reverse warning system, remote control for air suspension, side module, N3 vehicle, mirror cowl, road vehicle, L-cab StreamSpace, 2.50 m, flat floor, cab suspension comfort, steel-sprung, cab rear wall without window, outside storage compartment flap left, outside storage compartment flap right, exterior sun visor, transparent, A-pillar trim, tinted windscreen, heated front mirror, compressed air horns, cab roof, bumper center section with towing eyes, door extension, 2 remote keys, central locking system, comfort locking system, transmission G 281-12/14.93-1.0, single-plate clutch, Mercedes PowerShift 3, fifth wheel offset +600 mm, rear axle air suspension, lowliner, combination instrument, 10.4 cm with additional displays, EU digital tachograph with backup memory, tachograph manufacturer VDO, CD radio, Bluetooth, 2-way speaker system, CB radio 24 V, axle load measurement prep, preparation for toll collection, main tank left, tank 660l + 75l AdBlue, left, 735x565x2200 aluminium, lockable tank access, daytime running lights, fog lights, halogen, work lights below, prep for additional roof headlights, undertray to prevent dust swirl, noise regulation compliant with UN-R 51.03 Phase 1, engine OM471, R6, 12.8 l, 375 kW (510 hp), 2500 Nm, Euro VI engine version with OBD-C, High Performance Engine Brake, radiator grille, interior color almond beige, direct steering, Powertrain Pack 2, chrome package, interior, 9.00 x 22.5 drop-centre rims, 11.75 x 22.5 drop-centre rims front axle, electronic stability program (ESP), ... Blsdpfxsy Svtko Alcsh

Condition: good (used), We offer you here a used compensation plate of the manufacturer Polypal for sale. Bedpfsg Siiqjx Alcslh Included in delivery are: 01x shim, used Manufacturer: Polypal Type: SKUP Material colour: sendzimir galvanized dimension: approx. 130 x 85 mm thickness: approx. 1,25 mm Weight/piece: 0,119 kg

Condition: good (used), Technical data for the pallet rack upright: Shelf system: Hovuma The scope of delivery includes: 01x pallet rack upright, used Material color: cream white profile dim.: 85 x 50 x 17 x 3.0 mm Profile type: C 808 S275 Bedpfx Alskwdd Escolh Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( welded truss ) 6.640 mm high 870 mm deep

Condition: good (used), Technical data of the shim: Manufacturer: Polypal Included in delivery: 01x shim, used Bledpfx Aloi Hkm Ujcjh Total width: approx. 130 mm total depth: approx. 85 mm material thickness: approx. 1,50 mm Drill hole Ø: approx. 15 mm number of drill holes: 2 pcs. Weight: approx. 0.12 kg | pcs.

Condition: good (used), We offer here a used rear wall grille holder for sale. Included in delivery are: 01x holder f. rear wall grille, used material colour: sendzimir galvanized dimension leg A: approx. 115 x 85 mm dimension leg B: approx. 50 x 85 mm distance back wall grid: approx. 85 mm oblong hole dim.: approx. 21 x 10 mm distance center-center-hole: approx. 50 mm Blodpfx Aegyfxpjlcoh Weight/piece: approx. 0,403 kg Shipping costs on request

Condition: like new (used), total length: 850 mm, total width: 150 mm, hole spacing: 780 mm, The scope of delivery includes: 01x corrugated steel panel, used Manufacturer: SSI Schäfer Material color: sendzimir galvanized for frame depth: 850 mm Total length: approx. 850 mm Total width: approx. 150 mm Total height: approx. 11 mm Bedpfxoqucn Uj Alcelh Center-center hole: approx. 780 mm Material thickness: approx. 1.3 mm Weight per piece: approx. 1.930 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board Bjdpfxonah A He Alcslh -Manufacturer: KUKA LP electronics, control plug-in cards printed circuit boards -Type: ESC-CI V1.40 -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatik Panel PC 677B (AC) 15" Touch Industrial PS , SN: VPW7857742, serial no. acc. to photo ,used, good condition, 100% functional, scope of delivery acc. to photos Blodpfei Edgtjx Alcsh

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatik Panel PC 677B (AC) 15" Touch Industrial PS , SN: VPW7857746, serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Bjdpsi Edgwefx Alcjlh

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatik Panel PC 677B (AC) 15" Touch Industrial PS , SN: VPWN854125 serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Bodpfx Alji Edg Njcslh

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatik Panel PC 677B (AC) 15" Touch Industrial PS , SN: VPW7857747, serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Bljdpfx Alei Edgzscoh

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatik Panel PC 677B (AC) 15" Touch Industrial PS , SN: VPC3851071 serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Bledpfxsi Edgdo Alcoh

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatik Panel PC 677B (AC) 15" Touch DC 24V Industrial PS , SN: VPW7857741 serial no. according to photo ,used - TOP condition100% functional, scope of delivery according to photos Bsdpfsi Edgpex Alcelh

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatik Panel PC 677B (AC) 15" Touch Industrial PS , SN: VPW7857748 , serial no. acc. to photo ,used, good condition, 100% functional, scope of delivery acc. to photos Bljdpfx Aoi Edg Eslcjh

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatik Panel PC 677B (AC) 15" Touch Industrial PS , SN: VPX8854249, serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Bsdpfx Aoi Edg Tslcolh

Condition: ready for operation (used), Siemens 6AV7872-0BF30-0AC0 Simatic Panel PC 677B (AC) 15" Touch Industrial PS , SN: VPW7857744 , serial no. according to photo ,used, good condition, 100% functional, scope of delivery according to photos Bsdpfx Aloi Edgascelh