Used Presona Ab Lp 60 Vh1 for sale (31,364)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, year of last overhaul: 2026, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel Csdpsy S Rtljfx Agfsgu New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Cgedpfxjv T I Evj Agfju Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Codsy S Ru Aepfx Agfsgu Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Cgodjymmmpopfx Agfju Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baler Presona LP 85 VH2 with cross tying, year of construction 2018 Technical data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of construction: 2018 Codpfxeyz Snps Agfjgu Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1,200 cbm/h Throughput at 30–100 kg/cbm: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions of press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from running operation. Technical documentation is available. Please note: All technical data is based on manufacturer’s specifications. We accept no liability for the accuracy of the information provided or for possible errors. The offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Codoy R Npiopfx Agfsgu Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, power: 5.5 kW (7.48 HP), spindle mount: MK 4, drilling depth: 235 mm, actuation type: manual, rotational speed (max.): 1,250 rpm, rotational speed (min.): 32 rpm, total width: 950 mm, total length: 1,500 mm, total height: 2,400 mm, throat depth: 390 mm, table width: 840 mm, table length: 670 mm, overall weight: 1,200 kg, thread cutting capacity: M 30, Equipment: quick-change device, Heavy-duty column drilling machine, drilling capacity Ø 60 mm, table size 840x670 mm, motor 4.0 / 5.5 kW, 16 spindle speeds 32 - 1250 rpm, quill travel 235 mm, MK-4, throat 390 mm, dimensions 950x1500x2400 mm, weight approx. 1200 kg, electric tapping device, 5 feeds, machine lamp, coolant system, depth stop, BILZ quick-change system, various accessories in cabinet. Cgedpfx Ageylyqxsfsu

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, Price upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts are possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. *Leasing/hire purchase possible.* 2 units, 6000 mm, available directly in stock, RAL 7043 6 units, 6000 mm, available in the short term, RAL colors of your choice 2 units, 6500 mm, available directly in stock, RAL 7043 2 units, 6500 mm, available in the short term, RAL colors of your choice 7000 mm available in approximately 4 - 6 weeks, RAL color of your choice Other versions and sizes available from the Paderborn warehouse. You can view our stock levels on our website. Roll-off container platform according to DIN Technical description: * Dimensions 6000 mm: 6000 x 2550 mm internal dimensions * Dimensions 6500 mm: 6500 x 2550 mm internal dimensions * Unladen weight 6000 mm: 1,720 kg * Unladen weight 6500 mm: 1807 kg * Longitudinal beams INP 180, spacing according to DIN 30722 * Tread plate floor 5 mm S 235 * Including 8 lashing eyes in the floor plate, load-bearing up to 2.5 tons * Front wall height 1500 mm * Hook Ø 50 mm S355 * According to DIN 30722, including testing according to DGUV Rule 114-010 * Steel idler rollers 159 x 6.3 mm, length 300 mm * Zinc phosphate primer and painted with synthetic resin paint * Permissible total weight 15,000 kg Errors and prior sale excepted. Cgedpfxozbtm So Agfju Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,700 kg, empty load weight: 2,300 kg, loading space width: 2,500 mm, loading space length: 6,000 mm, loading space height: 125 mm, Dear Sir or Madam, We are offering a brand new roll-off platform from our own production for sale. The platform is equipped with the following features: - Manufactured according to DIN standards - Lifting bracket with 50 mm diameter - Hook height: 1570 mm - 5 mm checker plate flooring / 4 mm front wall thickness - Heavy-duty hook receiver with surrounding reinforcements - Reinforced IPN 180 longitudinal beams - External rollers greaseable and replaceable - Primed and painted in RAL 7016 (Anthracite) - C-lock mechanism in accordance with DIN - 5 pairs of recessed lashing rings, each with a load capacity of 2.5 t - Lateral perforated strips on each side with 30 mm holes - 6 massive and lockable inserts for equalizing wheel tracks - 120 mm recessed wheel tracks (deck height 125 mm) - Recessed wheel tracks approx. 4780 mm long & 708 mm wide each - 2 lockable front-mounted steel storage compartments - 2 lashing rings with 5.3 t pull force each on the inside front wall - 2 lashing rings with 5.3 t pull force each, fully recessed into the loading ramp area - 2 warning markings as per §32 (1) StVO & DIN - Incl. nameplate & container inspection according to DGUV Rule 114-010 (formerly BGR) - Immediately available Also available with usable lengths of 6.5 m & 5.5 m. Nationwide delivery possible at an additional charge! If you are interested in other roll-off container products, we would be happy to receive your inquiry! Cjdjymxqyspfx Agfsgu

Condition: used, mileage: 20,514 km, power: 220 kW (299.12 HP), first registration: 05/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, Like-new 18-ton Mercedes-Benz 1830 Actros truck with a loading crane and a 7.20 m long special platform body in a low-bed design, Hiab loading crane with 3 hydraulic extensions and remote control, additional 5th + 6th hydraulic control circuit, and only 125 operating hours, air-suspended front and rear axles, payload 7,580 kg, loading height approx. 1.19 m, air conditioning, automatic transmission, navigation system, GVWR 40 tons, trailer load 35 tons (technically possible). The truck has only 20,500 km on it, one owner, and more. Equipment: M-cab Classic-Space with rear window Wheelbase 5,550 mm Payload approx. 7,580 kg Weight variant 18.0 t (8.0/11.5) Unladen weight 10,420 kg Engine OM936 R6 7.7 l with 220 kW (299 hp) and 1200 Nm torque Engine Euro 6 D Drive 4x2 Loading crane Hiab X-HiDuo 092 B-3 with hydraulic 3-way extension Crane has only 125 operating hours! Cgsdpjzahxgsfx Agfeu UVV-certified crane, next inspection in 04/2026 XS Drive remote control additional floor control Lifting capacity at approx. 3.10 m / 2,450 kg // 3.90 m / 1,840 kg // 5.50 m / 1,260 kg // 7.30 m / 900 kg // 9.20 m / 700 kg according to the manufacturer Possible crane extension with 1 mechanical extension up to 11.30 m at 580 kg for an additional charge 2-point outrigger support Rotary servo and gripper control with 5th + 6th hydraulic additional circuit Platform body dimensions: 7.20 m x 2.45 m x 0.55 m high Loading height in driving position approx. 1.19 m. Platform with split 0.55 m high aluminum side panels and folding Kinnegriprungs All-round lashing rail in the floor profile on the outside 2 large plastic toolboxes at the rear right and left Automatic transmission G 211-12/14.93-1.0 Mercedes-Benz PowerShift 3 Transmission oil cooler Predictive Powertrain Control Differential lock in rear axle Air-suspended front and rear axles Front axle 8.0 tons, rear axle crown wheel 440, hypoid 13.0 tons Axle ratio i = 3.583 Air conditioning Electronic braking system with ABS, ASR and ESP High Performance Engine Brake Active Brake Assist 5 Disc brakes on front and rear axles Lane Keeping Assist Turning Assistant Attention Assist Traffic Sign Assistant Navigation system Storage compartment in the cab Cruise control Trailer coupling Rockinger D40 with air pressure connections Permissible total weight 40,000 kg Trailer load with continuous braking system 22,000 kg Trailer load with continuous braking system 35,000 kg technically possible Trailer load with SDAH/ZANH 18,000 kg Multi-function steering wheel in leather design Work lights LED daytime running lights and taillights 290 liter aluminum tank Sun visor Comfort central locking system 2 air horns on the cab roof Electrically adjustable side mirrors and electric windows Driver's air-suspended comfort seat with velour seat covers German vehicle, one owner Top condition with only 20,500 km Like-new condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2603

Condition: used, mileage: 20,514 km, power: 220 kW (299.12 HP), first registration: 05/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, Like-new 18-ton Mercedes-Benz 1830 Actros truck with a loading crane and a 7.20 m long, low-profile special platform, Hiab loading crane with 3 hydraulic extensions and remote control, additional 5th and 6th hydraulic control circuits, only 125 operating hours, air-suspended front and rear axles, payload 7,580 kg, loading height approx. 1.19 m, air conditioning, automatic transmission, navigation system, GVW 40 tons, towing capacity 35 tons (technically possible). The truck has only covered 20,500 km and comes from a single owner, and more. Equipment: M-cab Classic-Space with rear window Wheelbase 5,550 mm Payload approx. 7,580 kg Weight variant 18.0 t (8.0/11.5) Unladen weight 10,420 kg Engine OM936 R6 7.7 l with 220 kW (299 hp) and 1200 Nm of torque Engine Euro 6 D Drive 4x2 Loading crane Hiab X-HiDuo 092 B-3 with hydraulic 3-stage extension Crane has only 125 operating hours! Crane re-certified in 04/2026 XS Drive remote control Additional floor control Lifting capacity at approx. 3.10 m / 2,450 kg // 3.90 m / 1,840 kg // 5.50 m / 1,260 kg // 7.30 m / 900 kg // 9.20 m / 700 kg according to the manufacturer Possible crane extension with 1 mechanical extension up to 11.30 m at 580 kg available for an extra charge 2-point outrigger support Rotation servo and grab control with 5th and 6th hydraulic auxiliary circuit Platform dimensions: 7.20 m x 2.45 m x 0.55 m high Loading height in driving position approx. 1.19 m Platform with split 0.55 m high aluminum sideboards and Kinnegrip rails that can be folded down All-round lashing rail in the floor profile on the outside 2 large plastic toolboxes at the rear right and left Automatic transmission G 211-12/14,93-1.0 Mercedes-Benz PowerShift 3 Transmission oil cooler Predictive Powertrain Control Differential lock in rear axle Air-suspended front and rear axles Front axle 8.0 tons, rear axle crown wheel 440, hypoid 13.0 tons Axle ratio i = 3.583 Air conditioning Cgjdjzahxmepfx Agfou Electronic braking system with ABS, ASR and ESP High Performance Engine Brake Active Brake Assist 5 Disc brakes on front and rear axles Lane Keeping Assist Turning Assistant Attention Assist Traffic Sign Assist Navigation system Storage compartment in the cab Cruise control Trailer coupling, Ringfeder D40 with air pressure connections Permissible gross vehicle weight 40,000 kg Trailer load with continuous braking system 22,000 kg Trailer load with continuous braking system 35,000 kg (technically possible) Trailer load with SDAH/ZANH 18,000 kg Multifunction steering wheel in leather design Work lights LED daytime running lights and taillights 290 liter aluminum tank Sun visor Comfort central locking 2 air horns on the cab roof Electrically adjustable side mirrors and electric windows Driver's suspension seat with velour seat covers German vehicle from a single owner Top condition with only 20,500 km Like-new condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2603

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Cgjdpoyrhi Nofx Agfou Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press

Condition: new, Year of construction: 2024, color: orange, overall weight: 15,000 kg, maximum load weight: 13,390 kg, empty load weight: 1,610 kg, loading space width: 2,550 mm, loading space length: 6,000 mm, loading space height: 1 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, lashing rings Body: roll-off platform, pickup height approx. 1420 mm! Accessory information without guarantee, subject to changes, prior sale, and errors! Cgodpfxoyhc Ape Agfou

Condition: used, CNC control, control panel, control desk, control unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: KUKA LP electronics, control plug-in cards printed circuit boards -Type: ESC-CI V1.40 Cgjdonah A Hepfx Agfou -Item No.: 00-106-290 0018 -Dimensions: 255/160/H45 mm -Weight: 0.8 kg

Condition: used, functionality: fully functional, machine/vehicle number: 6616465, Year of construction: 2021, operating hours: 5,407 h, load capacity: 2,200 kg, fuel type: electric, construction height: 1,290 mm, fork length: 1,600 mm, empty load weight: 635 kg, drive type: Elektro, Low-lift pallet truck Chassis number: 6616465 Transmission: Electric-AC, stepless Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery type: PzS Description: BT LPE 220 Year of manufacture: 2021 Operating hours: 8,327 The machine is in very good visual and technical condition. Charger available upon request. Subject to errors and prior sale. If you haven’t found the forklift you are looking for, please contact us. We have a large selection of additional machines on site. Cgodpfx Aexpkxgegfsu

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 475 mm, table width: 450 mm, table length: 1,200 mm, table load: 400 kg, overall weight: 2,300 kg, We offer this used Abene Machine Ab VHF-360Ti milling machine, year of construction 2011. Serial number: 36120 Year of manufacture: 2011 Heidenhain TNC620-control Table size 1200 x 450 mm Max load 400 kg X-travel 650 mm, Y-travel 480 mm, Z-travel 475 mm Spindle BT40 Main motor 7,5 kW Weigth 2300 kg Excellent condition If you have any questions or need more information, feel free to send us a message or give us a call. Cgjdpfx Asy Hgnhogfsu

Condition: used, Bandsaw Manufacturer: Waco Jonsered AB Model: Bandresaw BK60 Year: 2015 Weight 8000 kg Cjdpowv S Acsfx Agfsgu Feed speed: 10-60 m/min Max. cutting height: 300 mm Max. distance sawband to fence side: 235 mm Max. width of the feed unit: 400 mm Min. distance sawband to sawband: 10 mm Feed rollers, diameter: 165 mm Feed rollers, height: 300 mm Saw wheel, diameter: 1080 mm Saw wheel, width: 100 mm Saw band, cutting speed: 42 m/sec Saw motors: 22 kW Feed unit (frequency converter): 5,5kW

Condition: excellent (used), ABB IRB4600-60/2.05 Robot and IRC5 VELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Csdpfjxq Tq Ijx Agfsgu

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors Cgedpfxeu R Sxxj Agfsu and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade faire machine *available upon request New: With the frequency converter option, up to a maximum of 45% eligible for state funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *both individual machines manufactured and in stock, only need to be connected to each other 1. Technical Data Briquetting Press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput rate (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Footprint total system: 2.2x1.1x2.8 m LxWxH Height - 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Press tongs cooling option: no Hydraulic oil cooling option: yes Cjdpsd Su Hxofx Agfjgu Filling level monitoring option: yes CE compliant 2. Technical Data Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle left (when standing in front of the dust bin) Residual dust:

Condition: good (used), mileage: 16,714 km, first registration: 11/2024, fuel type: electric, tire size: 225/55R17, axle configuration: 4x2, wheelbase: 3,430 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 2, total length: 5,370 mm, total width: 1,930 mm, total height: 2,050 mm, loading space length: 2,700 mm, loading space width: 1,650 mm, loading space height: 1,310 mm, Year of construction: 2024, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, traction control, = Additional Options and Equipment = - Halogen headlamp Csdpfjyzmh Rex Agfjgu - None - Alloy wheels - Manual - Radio/Cassette - Rear view camera - Lane departure warning system - Fabric - Blind spot sensor - Partition wall = Notes = Configuration: 4x2, Payload: 987 kg, Unladen weight: 2213 kg, Gross weight: 3200 kg, Alloy wheels, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: None, Electric windows, Electric mirrors, Partition wall, Radio/cassette, GPS navigation, Colour: White, Rear view camera, Lighting type: Halogen headlamp, Lane departure warning, Air conditioning, Heated seats, Bluetooth, Blind spot sensor, Fuel: electric, Transmission: Automatic, Power steering, ABS, ASR (traction control), Starter battery, Body type: extra long, Side panels covered, Roof rack: None, Central locking, Number of seats: 2, Seating arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual, XL Vebabox AC automatic, Tire type: Winter tires = Additional Information = Axle configuration Tire size: 225/55R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread left: 6 mm; Tire tread right: 5 mm Axle 2: Tire tread left: 5 mm; Tire tread right: 6 mm Weights Unladen weight: 2,213 kg Payload: 987 kg GVW: 3,200 kg Functional Loading platform height: 55 cm Maintenance APK (technical inspection): valid until 11/2028 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €593 per month (commercial vehicle, 72 months); Please inquire for further information and conditions Identification Registration number: V-12-JBG

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, Used Spiral Mixer S-Super FAB 60 - Approx. 60 kg dough, 37 kg flour - Year of manufacture: 2005 - 2-speed, 2 timers, manual/automatic mode - Bowl rotation clockwise/counterclockwise - Flour dust cover - Mobile - Painted version (grey) - Spiral motor power: 2.1/3.7 kW, bowl: 0.55 kW, 400 V Includes operating manual, fully functional, cleaned and technically inspected All prices are subject to VAT, ex works Syke. Available at short notice (shipping possible at buyer’s expense) Cedpfjy Rkqhjx Agfsgu Advance payment required with order. All sales are subject exclusively to our General Terms and Conditions. Sale subject to prior sale, technical modifications, and errors reserved.

Condition: excellent (used), OSP P200M Control Working travels 1000 x 1000 x 900 mm Tool changer with 200 Positions Spindle speeds 50- 12'000 rpm Spindle taper SK50 6 paletts 630 x 360 mm B-axis Table 360 ° Cooling through spindle Tool breakage control Clamping cubics 3D measuring taper Chip conveyor Codpfxey Hqv Ns Agfegu Misc. accessories MARCELS MASCHINEN AG

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Codpjyr Tpnsfx Agfegu

Condition: excellent (used), Year of construction: 2000, INDEX ABC 60 Spindle automatic CNC operational, fully functional Year: 2000 Condition: very good, operational Ready for immediate delivery Machinery runs without any problems. Technical details: 1-Spindle Automatic CNC Fized Headstock Lathe Serial number 400290 control SIEMENS 840 C passage: 65 m tool turrets with driven tools: 2 front and rear side machining chip conveyor: KS SRF 040.00 Bar loading: SCHMID LN 3200 Weight machine: 3500 kg. Cjdpfjy Nycdsx Agfsgu Overall size: 6500 x 1500 x 1800 mm. We are waiting for you in H.B.R. srl - ITALY