Used Presona Ab Bale Press for sale (23,651)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Ksdpfx Aevn Tg Iempjlr Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Ksdoymmmpjpfx Ampjlr Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. Kledpfxjvwlqqo Ampjr New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: Kodsu Thhropfx Ampslr General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2007, operating hours: 21,676 h, functionality: fully functional, pressing force: 78 t, filling opening width: 750 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 25,000 kg, transport height: 3,000 mm, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), empty load weight: 25,000 kg, volume flow: 930 m³/h, operating pressure: 250 bar, How do you do? We are pleased to offer you a used baler of the manufacturer Presona AB, type LP 80 VH1. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot accept any liability for correctness and completeness. Manufacturer Presona AB, Sweden Type LP 80 VH1 Year of manufacture 2007 Kodevgrh Uepfx Ampolr Total operating hours, 21,676 hours, as of November 2024 Main press force 78 t Specific pressing force 95 N/cm² Pressing force of prepress flap 28 t Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput capacity under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW Tying 5-fold vertical Hydraulic oil tank volume 1,000 L Baler dimensions assembled with hopper 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight press approx. 25 t Note: The machine was used by a recycling company to compact paper, cardboard and film. The press is in good condition, in operation until January 2025 and can be inspected by appointment. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. Kledpfxjv T I Evs Ampjr The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2013, functionality: fully functional, Available from 15.05.2026 Baling Press Paal Konti 325 G, Year of manufacture 2013 Technical Data: Manufacturer: Paal Model: Konti 325 G Year of manufacture: 2013 Operating hours: 11,723 (as of 10.02.26) Pressing force: 100 t Drive power: 2 x 55 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 5-fold automatic Throughput rate at: 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12,216 x 2,530 x 2,800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data is based on the manufacturer's information. We do not assume liability for the details provided or for any potential errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. Ksdpfx Amey A Ibnjpjlr Sale against prepayment ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Kljdpsy Avlnefx Ampor Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee. Kodpfx Amsy Avhcspolr

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baler Presona LP 85 VH2 with cross tying, year of construction 2018 Technical data: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of construction: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pre-press force: 28 t Ksdpfsyz Snpox Ampjlr Main press force: 85 t Feed opening: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Theoretical throughput: 1,200 cbm/h Throughput at 30–100 kg/cbm: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil tank volume: 2,000 L Transport dimensions of press: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from running operation. Technical documentation is available. Please note: All technical data is based on manufacturer’s specifications. We accept no liability for the accuracy of the information provided or for possible errors. The offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II, Year of Manufacture 1979 Technical Specifications: Manufacturer: Paal Model: Pacomat II Year of Manufacture: 1979 Drive Power: 11 kW Pressing Force: 27 t Channel Cross Section: 700 x 1000 mm Filling Opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale Size: 700 x 1000 mm Bale Weight: up to 400 kg Machine Dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine Weight: approx. 5200 kg Materials: Paper, Cardboard, Film Remarks: The machine is in fully functional condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Kodpfx Ameyz Salepolr Please note: All technical details are based on information provided by the manufacturer. We accept no liability for the accuracy or possible errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Viewings are possible by prior arrangement. Sale is ex works, without warranty or guarantee. Our payment terms require 100% advance payment.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of Manufacture 2000 Technical Data: Kjdpfjyz R Uuox Ampelr Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput performance at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, Cardboard, Film The baler is in good condition and has been checked and tested. A video is available on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on manufacturer’s information. No liability is accepted for the data provided or for potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, advance payment only, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, Year of Manufacture 2019 Technical Data: Manufacturer: Presto Model: CC 20 M Year of Manufacture: 2019 Operating Hours: 1,022 Pressing Force: 20 t Cycle Time: 24 s Drive Power: 7.5 kW Filling Opening: 1030 x 750 mm Filling Volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of: 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale Dimensions: 700 x 750 mm Bale Weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine Weight: approx. 2,500 kg Materials: Paper, Cardboard, Film Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. A video is available on our website or our YouTube channel. Ksdpfx Asyz R S Hsmpjlr Please note: All technical data is based on manufacturer information. We accept no liability for the details provided or any possible errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspection is possible by appointment. Sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Kljdpjyz R Hqofx Ampsr Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Channel Bale Press Presto HPK 50 HS, Year of Manufacture: 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (LxW) Channel Cross-Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Kljdpfx Amsyz R Eyopsr Note: All knives and counter-knives as well as all sliding plastics have been replaced. The press is in good condition and has been checked and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Please note: All technical data is based on information provided by the manufacturer. We do not assume liability for the information provided or for possible errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-and-tilt device Technical Specifications: Manufacturer: Presto Model: CC 50 M Year: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput depending on bulk density: 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: Klsdpfx Amjyz R Etepor The machine is in good condition. It has been inspected and tested at our premises in 28816 Stuhr. The video is available on our website or YouTube channel. Please note: All technical data is based on information from the manufacturer. We accept no liability for the details provided or for any possible errors. Subject to prior sale; offer is non-binding and may be revoked at any time. Inspections are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Baler Presto CC 30 V, year of manufacture 2006, incoming Technical data: Manufacturer: Presto Model: CC 30 V Year: 2006 Pressing force: 30 t Cycle time: 34 s Drive power: 11 kW Filling opening: 1080 x 950 mm Filling volume: 0.69 m³ Tying: 4-fold, automatic Throughput at bulk density of 35 kg/m³ - 2.0 t 60 kg/m³ - 3.2 t 100 kg/m³ - 4.8 t Bale size: 700 x 950 mm Bale weight: up to 350 kg Dimensions: 3650 x 1770 x 2150 mm (LxWxH) Machine weight: approx. 3900 kg Materials: Paper, cardboard, film Please note: All technical specifications are based on the manufacturer's information. We accept no liability for the details provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Kledpfxoyz Il Dj Ampor Viewing is possible by appointment. Sale is ex works, prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baler Paal Konti 325 D/SO, year of manufacture 1999 Technical Data: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, variable length Binding: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH) Machine weight: approx. 28,000 kg Klsdoyzzgnepfx Ampjr Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated specifications or possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex-works against advance payment, without warranty or guarantee.

Condition: good (used), Baling press, Schleicher, 16 S – used - : Ex-works price: only €1,950 (net) Manufacturer: Schleicher Model: 16 S Serial number: 6150I1730E Year of manufacture: 20 Kodjyzcwhspfx Ampslr Height: 2000mm / Width: 1500mm / Depth: 900mm Weight: 1,850kg 380V, 3-phase, 10.3 AMP, 4kW Condition: good Available: immediately Location: Husum Operating manual not available.

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Ksdpsyzcvwofx Ampolr Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Available: immediately Location: Husum Operating manual available

Condition: ready for operation (used), Year of construction: 2012, Brand: HSM Model: V-press 860 plus Year of manufacture: 2012 Press force: 532 kN Voltage: 400 V Max. bale weight: 480 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm Ksdpjyz I Hhofx Ampjlr Condition: very good! Functionality checked. Video of the machine in operation available on request. FLITS Rental & Sales service: With each machine, we supply a bundle of binding wire (120 wires). Need more bundles? Request a non-binding quote.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm Klodpfx Amoy Ayiqepsr - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Main cylinder resealed. New hydraulic hoses. New hydraulic oil. Kledpfx Amsy D Dr Sspsr Sub-oil motor. Plexiglass panels replaced. Guide rollers on the press plate readjusted. Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June 2026 Baler Presto HPK 50 BS, year of manufacture 2011, with Whirbulator and optional Horstmann chain belt conveyor Manufacturer: Presto Model: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 1050 mm (L x W) Channel cross-section: 700 x 1100 mm Maximum feed volume: 1.23 m³ Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 6 t/h 60 kg/m³: 9.6 t/h 100 kg/m³: 13.9 t/h Klodpfxsyub Drs Ampsr Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Chain Belt Conveyor Data Manufacturer: Horstmann Model: PK 1100/11 Year of manufacture: 2011 Belt width: 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Feed length: approx. 3000 mm Incline section: approx. 5000 mm Gooseneck: approx. 1000 mm The baler is still in operation and can be inspected under working conditions. It will be available from early June 2026. Please note: All technical data is based on information from the manufacturer. We do not assume any liability for the specifications provided or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Dixi 80 SLD with lifting/tipping device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Klsdpeyt Hl Sofx Ampsr Press cycle: approx. 35 s Throughput capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data is based on manufacturer specifications. We accept no liability for the information provided or for potential errors. This offer is subject to prior sale and change without notice. Inspection is possible by arrangement. Sale is ex works, advance payment, without warranty or guarantee.