Used Positive Saddle-Mounted Monoblock Unit for sale (42,803)

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg Hodpfjxvr T Eox Ab Ejr - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Condition: new, - External dimensions (LxWxH): 644x930x863 mm - Application range: -18 ÷ -22°C - Evaporation temperature: -30°C Ibedcvyexvr Upoqi Asd - Condensation temperature: +40°C - Cold room temperature: -20°C - Ambient temperature: 32°C - Defrost: Hot gas - Power supply: 230 V / 1+N ph / 50 Hz - Maximum absorbed current: 13.2 A - Maximum absorbed power: 2.8 kW - Nominal absorbed power: 110 W - Refrigerant: R452A - Output: 1,318 W - Nominal output: 1.9 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø300 mm Hjdpfoxvr Upjx Ab Esr - Airflow: 1,000 m³/h - Air throw: 6 m - Weight: 89 kg - Volume: 0.80 m³ - Hermetic compressor - Air-cooled condenser - Galvanized sheet body - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (BT models only) - Ambient temperature sensor - End-of-defrost sensor - Condensation control sensor - Power cable for door heater - Micro-switch connection cable - Digital display with temperature indication - Operating status display: - Cooling/defrost - Evaporator fans - Active alarm - Programming keys - Manual defrost button - Audible alarm - Low and high temperature alarm - High condenser temperature alarm (dirty condenser) - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - End-of-defrost time overrun alarm - Faulty temperature sensor alarm - Condensation control sensor failure alarm - Evaporating temperature at -10°C for positive temperature (TN) - Condensation temperature at +40°C for TN - Evaporating temperature at -30°C for low temperature (BT) - Condensation temperature at +40°C for BT The listing was translated automatically. Translation errors are possible.

Condition: used, Year of construction: 2001, machine/vehicle number: 008147801, Offer 26176 Technical data: - Dimensional stop with digital display 6000 mm Hsdpfx Aezhamdob Eor - Jaw feed adjustable by handwheel with clamping function - pneumatic stop clamping - Pneumatic connection 6 bar - Space requirement approx. L 7700 x H 1350 x D 900 mm - Weight approx. 1200 kg

Condition: new, functionality: fully functional, machine/vehicle number: TKG, cooling capacity: 3.5 kW (4.76 HP), overall weight: 40 kg, input voltage: 230 V, warranty duration: 12 months, type of cooling: air, Monoblock air conditioning units (with exhaust hose), original packaging, for sale. The following sizes are available: 2 kW (BTU 7000) for rooms up to 23 m² – €213.00 Hodjwwrk Aepfx Ab Eor 2.6 kW (BTU 9000) for rooms up to 25 m² – €272.50 3.5 kW (BTU 12000) for rooms up to 35 m² – €390.00 3.5 kW (BTU 12000) for rooms up to 35 m² with WIFI – €451.00 Shipping within Germany per unit: €25.00 Manufacturer: KALORIK All prices incl. VAT.

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E Hjdefx Hyfopfx Ab Eor The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net Hodsu S Tfgjpfx Ab Ejr

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1085, Offer 24448 Technical specifications: - Maximum load capacity 5000 kg - Maximum clamping diameter 1800 mm - Faceplate dimensions 1200 x 1200 mm - Continuously adjustable electrical rotation - Right and left rotation - Electric remote control - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW - Space requirement approx. W 1500 x H 1650 x D 1300 mm - Weight approx. 2500 kg Hsdowfq Nmepfx Ab Eer

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Technical data: - max. load capacity 1500 kg - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm Hodpfx Ajrkmaajb Eer - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf Hsdpfx Asyc H I Seb Eor • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, In this offer you purchase a used accessory ‘Canon Document Insertion Unit N1’ Object of sale: 1 x Canon Document Insertion Unit N1 for various Canon models Hjdpfet Rfh Esx Ab Esr Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Hedpfovg U Dxex Ab Eor Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: excellent (used), NORDSON PROBLUE 7 HOTMELT GLUE UNIT IN EXCELLENT CONDITION Hsdpfxortnv Do Ab Eer

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Hsdpfx Ajyil A Ssb Esr Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), Year of construction: 2025, ### Crawler Mobile Crusher / Track-Mounted Mobile Stone Crusher: Introduction and Application Introduction: Crawler mobile crushers, also known as track-mounted mobile crushers, are versatile and highly efficient machines designed for crushing various materials on-site. Unlike traditional fixed crushers, these mobile units are mounted on tracks, allowing them to navigate rough terrains and remote locations with ease. These crushers integrate feeding, crushing, screening, and conveying processes into one system, providing flexibility and reducing the need for multiple pieces of equipment. Powered by diesel engines, they offer mobility, reduced setup time, and a compact design that simplifies transportation. Key Features: 1. Mobility: Track-mounted design ensures ease of movement across different sites. 2. Versatility: Suitable for crushing various types of materials, including rocks, ores, and demolition waste. 3. Efficiency: High-performance crushing and screening capabilities. 4. Eco-friendly: Equipped with dust suppression and noise reduction systems. 5. Automation: Advanced control systems for smooth operation and minimal manual intervention. Applications: 1. Quarrying and Mining: Ideal for crushing hard and abrasive stones such as granite, basalt, and limestone. They efficiently process raw materials for construction aggregates and mining operations. 2. Construction and Demolition: Perfect for on-site crushing of demolition waste, including concrete, bricks, and asphalt. This reduces the volume of waste and allows for recycling of materials, contributing to sustainable construction practices. 3. Infrastructure Projects: Widely used in road construction, railway ballast production, and infrastructure development. Their mobility ensures they can operate close to the construction site, reducing material transportation costs. 4. Recycling: Effective in recycling operations, particularly for crushing and processing concrete and asphalt debris. This contributes to reducing landfill use and conserving natural resources. 5. Aggregate Production: Essential for producing high-quality aggregates used in construction projects. Their capability to produce different sizes of aggregates meets various industry standards and requirements. Conclusion: Hjdpfeq Nfvuex Ab Esr Crawler mobile crushers are indispensable in modern construction and mining operations. Their mobility, efficiency, and versatility make them a valuable asset for industries requiring on-site crushing and screening. By reducing setup time and transportation costs, they enhance operational efficiency and contribute to eco-friendly practices through material recycling.

Condition: new, functionality: fully functional, Year of construction: 2024, A crawler mobile stone crusher is a mobile crushing device that has a tracked chassis, which allows it to move around the site and be transported from one location to another. This type of crusher is generally used in areas where there are space restrictions and the stones need to be crushed directly at the site, making it a versatile and flexible option for various applications. Here are some key features and aspects of crawler mobile stone crushers: 1. Mobility: - The primary advantage of a crawler mobile stone crusher is its mobility. The tracked chassis enables it to move easily on different types of terrain, making it suitable for a wide range of applications, including construction sites, quarries, and demolition projects. Hedpfxsq Nxpgs Ab Esr 2. Crushing Mechanism: - Crawler mobile stone crushers are equipped with a primary crusher to break down the large rocks into smaller pieces. Common types of primary crushers include jaw crushers, impact crushers, or cone crushers. 3. Versatility: - These crushers are versatile and can handle various types of materials, including hard rocks, ores, and recycled concrete. They can be used for primary, secondary, or tertiary crushing depending on the specific requirements of the application. 4. Remote Control Operation: - Many crawler mobile crushers are equipped with remote control systems, allowing operators to control the equipment from a distance. This feature enhances safety and efficiency, especially in challenging or hazardous environments. 5. Compact Design: - Crawler mobile stone crushers typically have a compact design, making them suitable for working in confined spaces or on construction sites with limited available space. 6. Hydraulic System: - The crushers are often equipped with a hydraulic system to facilitate quick and easy adjustment of the crusher settings. This includes adjusting the crusher's discharge opening and controlling the feed rate. 7. High Production Capacity: - Despite their compact design, crawler mobile stone crushers can have high production capacities. This is crucial for efficiently processing large volumes of material on construction sites or in mining operations. 8. Screening Unit (Optional): - Some crawler mobile crushers come with an integrated screening unit, allowing the production of multiple particle sizes in a single pass. This can be particularly useful in applications where a specific range of sizes is required. 9. Power Source: - Crawler mobile stone crushers are typically powered by diesel engines, providing the flexibility to operate in remote areas where electrical power may not be readily available. 10. Easy Maintenance: - Many crawler mobile crushers are designed with ease of maintenance in mind, with features such as access panels and service points to simplify routine inspections and repairs. Crawler mobile stone crushers have become popular in the construction and mining industries due to their flexibility, mobility, and ability to crush a variety of materials on-site. They offer a solution for efficient and convenient mobile crushing operations in diverse working environments.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Hjdjzmry Tjpfx Ab Ejr Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Hsdpfx Abeznmpxs Eer Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: new, functionality: fully functional, power: 85 kW (115.57 HP), empty load weight: 2,200 kg, fuel tank capacity: 200 l, TECHNICAL DETAILS Engine type: Diesel-hydraulic Engine: Deutz TCD 3.6 L4 Emission standard: China IV / Stage IV Rated power: 85 kW (115 hp) Fuel tank: 200 l MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,400 x 1,600 mm Weight: 2,200 kg EQUIPMENT Remote control Multiple cylinder blocks Hsdpfxsznmpls Ab Ejr Hydraulic unit: External Connections for variable displacement pumps: 2 units, manually adjustable Connections for large gear pumps: 2 units, adjustable via engine speed Connection for small gear pump: 1 unit, adjustable via engine speed

Condition: excellent (used), functionality: fully functional, Pamasol Single Stage Filler Type: 2079 Hodpfx Abjznw Aio Eer Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Hodpfx Asx Iggyeb Eer Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm

Condition: excellent (used), Year of construction: 2014, Ref:11114. 2014 Muller Martini Primera E140. Hjdpozn Hqisfx Ab Eor Latest specification, top of the range, M.M. saddle stitcher with short change over times and wide size range. The 'E' model has full ‘AMRYS’ (Automatic Make ReadY System) set-up. Feeders, stitcher, trimmer & stacker are quickly and automatically set to the desired book format. Comprising: 7 station track & chain on universal bases 6 x 3738 stream feeders 6 x 0379 top-loading feeders with ASIR III cameras 0507 Cover feeder with motion / copy control Semko & Ellex control Primera E140 stitching unit 2 standard stitching heads HK75 2 ring-eyelet stitching heads HK75 0408 three knife trimmer with centre cut M.M. 'Robusto' 0451 compensating counter stacker Including PIAB air venturi suction system. N.B. In-house compressed air supply required (not included). Specification: Product size (untrimmed), Max: 480 x 320 mm high folio lap (290 mm low folio lap) Max: 480 x 300 mm (without lap) Min: 90 x 80 mm (with & without lap) Signature size stitching, Max: 480 x 320 mm Min: 153 x 115 mm, 126 x 123 mm (CD size) Product sizes, trimmed, Max: 475 x 310 mm Min: 105 x 63 mm (148 x 105 mm with stacker) Head/foot trim, Max: 50 mm front trim, Max: 50 mm Product thickness, Max: 13 mm (standard) Mechanical speed, Max: 14,000 copies/hr.

Condition: ready for operation (used), 1 x Stitching unit 380 with Amrys 2 x Stitching headsd HK75 1 x Caliper control with reject 1 x Obluque sheet saddle monitor Hedpfx Aboxya Eqe Esr 1 x Remote control jogger inch 5 x Section feeders 370 with Amrys 1 x Cover folder feeder 554 with Amrys 1 x Three knife trimmer 449 with Amrys 1 x Muller Martini Perfetto stacker delivery 450

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 Hodpjvpaubefx Ab Eor 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys 1 x OMG stacker delivery

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 365 kg, total height: 1,900 mm, Manufacturer: APC by Schneider Electric Model: Upsilon STS 600 Article No.: 3400488000 Serial No.: RJ-93PM04007 Year of Manufacture: (to be confirmed, approx. 2006–2007) Location: United Kingdom Technical Specifications Rated Current: 600 A Input Sources: 2 independent mains inputs Input Voltage: 380–400 V, 50/60 Hz Output Voltage: 380–400 V, 50/60 Hz Output Phases: 3W + N + PE Height: 1900 mm Condition Decommissioned from a data centre Professionally maintained, excellent working order Hodew Tbi Eepfx Ab Ejr Available for inspection upon request

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads  Hjdpfexxnlpjx Ab Eor