Used Plasma Easytemp 95 for sale (3,298)

Year of construction: 2017, condition: good (used), Temperature control unit plasma easytemp 95 Stock No.: 503628 Machine/Device type: Temperature control unit Manufacturer: plasma Ledpfext Nm Rjx Afkjaf Model: easytemp 95 Year of manufacture: 2017 Max. operating temperature: 95°C Heating capacity: 6 kW Cooling capacity: 40 kW (80 °C supply / 15 °C cooling water) Heat transfer medium: Water

Year of construction: 2016, condition: good (used), Temperature control unit plasma easytemp 95 Stock No.: 503629 Machine/Device type: Temperature control unit Manufacturer: plasma Model: easytemp 95 Year of manufacture: 2016 Lasdpoxt Nnuofx Afksf Max. operating temperature: 95°C Heating capacity: 6 kW Cooling capacity: 40 kW (80 °C flow / 15 °C cooling water) Heat transfer medium: Water/water

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Lasdpfxjyah R Nj Afkef Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503643 Machine type / Device type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical Data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating power: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K; pressure difference in the cooling water circuit at least 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar Lasdpfext Rc Hex Afksf - Motor power: 0.5 kW - Equipment includes: • Self-optimizing SBC microprocessor controller • Digital display of set and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault reporting • Acoustic alarm indicator • Operating hours counter • Heating control via solid state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Suction for tool change • Manual filling • Dirt filter • Unit mounted on rubberized casters • Connections: Mold hose nozzle G 1/2" (14 mm), Cooling water hose nozzle G 3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L = 0.73 m, W = 0.27 m, H = 0.58 m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503642 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Technical Data for plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50: - Circulation medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference of 80 K between tool inlet and cooling water; minimum pressure difference in cooling water circuit: 3 bar - Pump: Bronze submersible pump, Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC - with digital display of setpoint and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault signal • Acoustic alarm buzzer for alerts • Operating hours counter • Heating control via Solid State Relay (SSR) • Leak monitoring • Leak stop mode (suction operation) • Extraction function for tool change • Manual fill option • Dirt filter • Unit mounted on rubberized castors • Connections: Tool hose connector G 1/2" (14 mm), Cooling water hose connector G3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m Lodpfx Asx A Swdsfkeaf • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulation medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock No.: 503634 Machine/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Laedpfxext N D Ns Afkef Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Lajdpfxsxt N Hws Afksf Stock no.: 503637 Machine/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160°C Heating capacity: 9 kW Circulating medium: Water/water

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature control unit plasma plasTemp Primus 90 Stock no.: 503644 Machine type / Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical data plasTemp temperature control unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW, via two stainless steel tubular heaters made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K, pressure difference in the cooling water circuit min. 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Self-optimizing microprocessor controller, SBC • Digital display for setpoint and actual value of supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm indicator • Hour meter • Heating control via solid-state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Draining for tool change • Manual filling • Dirt filter Ledoxt Rddjpfx Afkoaf • Unit mounted on rubberized castors • Connections: Mold hose nozzle G 1/2” (14 mm), cooling water hose nozzle G 3/8” (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock no.: 503636 Machine type/Device type: Temperature control unit Lsdpfx Afox A Svtjksaf Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulation medium: Water

Year of construction: 2007, condition: used, functionality: fully functional, The temperature control unit from Plasma/Single is for sale; there are 2 units available for sale, and the price is per unit! Lasdpfx Aszul N Rjfkjf Medium: Oil Maximum operating temperature: 180°C Heating capacity: 6 kW Cooling capacity: 14 kW External cooling fan... PT 100 sensor Interface 0-20 mA

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). The visual condition is very good, with only minor signs of normal use. Technical specifications: • Manufacturer: DELO Laodpfxjzrv Hze Afkjf • Model: DELO-UNIPRO • Part number: 95 200 01 • Serial number: 1501 UNI 648 • Power supply: 100–240 V AC • Frequency: 50–60 Hz • Power consumption: 40 W • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. Lodpfey A Trlsx Afkoaf If you have any questions, please feel free to contact me.

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Lsdjx Eg T Eopfx Afkeaf

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Ljdpfsx Ek Rdex Afkeaf Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Condition: new, Year of construction: 2024, NEW Plasma Cutting Machine. Dimensions: 3,000 mm x 1,500 mm Max. steel cutting thickness: 22 mm Max. stainless steel cutting thickness: 12 mm Supplied with CAD CAM software. Laodpetu E Duofx Afkjf DWG and DXF data transfer via USB and network card. CE certification. ISO 9001, GB/T 19001. 120 A generator. The operational cost is extremely low – only 5.5 kW and compressed air!

Year of construction: 2007, condition: used, Pulsed plasma nitriding system, manufacturer PLATEG Plasma Technik Grün, type PulsPlasma PP 800, 2000 x 2900, mono with tandem preparation, system no. A 5811, with 1 plasma generator, type PP 800/160, no. AN 7491, year of manufacture 2006/2007, 600 V output voltage, 800 A pulse current, 480 kVA pulsed power, 190 kW connected load, process control type Stange 510, stainless steel vacuum chamber Ø 2000 mm (usable volume 1800 mm), height 2900 mm (usable height 2200 mm), wall thickness 10 mm, batch weight 7,500 kg, process temperature max. 600°C, vacuum pump by Leybold, 13 kW, 2,000 m³/h, DN 160, with pressure sensor and manometer, gas supply, cooling water supply with internal recirculator, overall dimensions: 7,840 mm x 3,470 mm x approx. 7,400 mm height, with control cabinet including 2 cooling units. Lodpfxeyazhze Afkeaf

Condition: repair required (used), Year of construction: 2006, functionality: not functional, turning diameter: 450 mm, travel distance X-axis: 303 mm, travel distance Z-axis: 1,160 mm, overall weight: 10,000 kg, swing diameter over bed slide: 700 mm, controller model: Siemens 810D ShopTurn, Note: The main drive motor is currently not functional; an inspection and/or repair is required. TECHNICAL DETAILS Maximum turning diameter: 450 mm Swinging diameter over bed: 700 mm Swinging diameter over cross slide: 500 mm Maximum workpiece length: 1,100 mm X-axis travel: 303 mm Z-axis travel: 1,160 mm C-axis resolution: 0.001° Spindle speed max.: 3,500 rpm Distance between centers: 1,230 mm Chuck diameter: 315 mm Bore in draw tube: 95 mm MACHINE DETAILS Control: Siemens 810D ShopTurn Total weight: approx. 10,000 kg EQUIPMENT C-axis Tailstock Ledpfx Aozt Sbksfkjaf Steady rest Hollow chuck cylinder Chip conveyor Extraction system

Year of construction: 2007, condition: like new (used), 457mm wide stainless steel belt with overlay Ashworth Omni grid Belt 95mm Product gap 155 Tier pitch Main drive - 4Kw 1600 diameter drum Goedhart Freon evaporator Laedozuzvgjpfx Afkef full cascading refrigeration pack included in a container More photos and spec upon request

Condition: new, Year of construction: 2026, functionality: fully functional, sheet thickness (max.): 350 mm, sheet thickness steel (max.): 20 mm, total width: 2,450 mm, total height: 2,350 mm, total length: 4,800 mm, cutting height (max.): 350 mm, workpiece weight (max.): 6,500 kg, warranty duration: 36 months, space requirement length: 3,150 mm, space requirement height: 5,000 mm, space requirement width: 2,450 mm, Equipment: documentation/manual, The Bluemotion HCP Series CNC Plasma is engineered for fabricators who demand precision, reliability, and ease of use. Lsdpfszpzwmjx Afkeaf Designed and manufactured in Ireland, every HCP Series machine is built using premium industrial components and supplied with industry-leading Hypertherm technology as standard, delivering exceptional performance from the very first cut. Standard Features: - Hypertherm Edge® Connect CNC Control - Hypertherm ProNest® CAD/CAM Software Included - 350mm Gantry Clearance for processing sheet metal, 3D Profiles - Bosch Rexroth Linear Motion Components - Fully Servo Driven Axes with Servo Motors & Drives - Sealed Energy Chains for max. reliability in harsh workshop environments - Integrated Laser Pointer for fast and accurate plate alignment - Intelligent 3D Collision Detection to protect the torch and machine - Heavy-Duty Welded Steel Construction - Intuitive operation with a streamlined workflow from CAD to cut. - Comprehensive Commissioning & Operator Training From importing a DXF into Hypertherm ProNest to producing finished components, the HCP Series has been designed to maximise productivity while remaining straightforward to operate. Whether you're producing one-off prototypes or high-volume production work, the HCP Series delivers the accuracy, speed and reliability modern fabrication businesses expect. Every Bluemotion machine is backed by expert technical support, professional installation, and ongoing after-sales service to ensure you get the maximum return on your investment. This price includes: - Hypertherm 85A SYNC Plasma Source (20mm Pierce Capacity) - 3-Year Full Machine Warranty Built in Ireland. Trusted by fabricators. Designed to perform.

Condition: good (used), mileage: 55,073 km, power: 70 kW (95.17 HP), first registration: 02/2022, fuel type: diesel, tire size: 185/65R15, axle configuration: 4x2, wheelbase: 2,810 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,390 mm, total width: 1,780 mm, total height: 1,840 mm, loading space length: 1,920 mm, loading space width: 1,410 mm, loading space height: 1,250 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, = Additional options and accessories = - Heated mirrors - Halogen lamp - None - Leather / Fabric - Manual - Radio/Cassette - Partition = Notes = Configuration: 4x2, Payload: 723 kg, Unladen weight: 1279 kg, Gross vehicle weight: 2002 kg, Towing capacity, unbraked: 685 kg, Towing capacity, center axle, braked: 1200 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assist: Front and rear, Electric windows, Electric mirrors, Partition, Radio/Cassette, GPS navigation, Color: Gray, Metallic, Heated mirrors, Type of lighting: Halogen lamp, Bluetooth, Engine power: 70 kW (94 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat configuration: 1+1, Seat cover: Leather / Fabric, Seat adjustment: Manual, metallic, air conditioning, navigation, parking distance control, side door, 54,000 km, Tire type: All-season tires = Additional information = General information Number of doors: 1 License plate: VNV-60-J Laedpfx Afszvvuyekjf Axle configuration Tire size: 185/65R15 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Weights Unladen weight: 1,279 kg Payload: 723 kg GVW: 2,002 kg Functional Loading area height: 52 cm Maintenance APK (Technical Inspection): valid until 02.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 206 € per month (delivery van, 72 months); Inquire for further information and conditions

Condition: used, Year of construction: 2015, Swift Cut 3000 W/T Plasma Cutting Machine, 3000mm x 1500mm Cuttting Bed, Hypertherm Powermax 125 Power Source. S/No. 4500318 (2015). Country of Origin: United Kingdom Ledpfx Aezn Uuiefksaf Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 1995, pressure 60T t chamfer lenght 2000 mm distance between columns 1640 mm height of stroke 325 mm work feed 15 mm/s Laodpfxjyk Ikde Afksf control SOMABEND total power requirement 12,5 kW weight of the machine ca. 4,3 t Serial No: 22161

Condition: used, Year of construction: 1995, pressure 60T t chamfer lenght 2000 mm distance between columns 1640 mm height of stroke 325 mm work feed 15 mm/s control SOMABEND Ledpfx Aex Tu Szjfkeaf total power requirement 12,5 kW weight of the machine ca. 4,3 t

Condition: excellent (used), Year of construction: 2021, • Baykal BPL-H 4012 • Supplied new in 2021 • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 3,480 and 5,448 • 4 m x 10 m bed Laodpfszp D T Dox Afkjf

Condition: good (used), Year of construction: 2017, functionality: fully functional, • Baykal BPL-H 4012 Lajdjzp D S Tspfx Afkjf • Supplied new in 2017 • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 2,016 and 3,120 • 4 m x 12 m bed