Used Pharmatec Multistage Pressure Column Distillation for sale (17,197)

Condition: good (used), Pharmatec 500-S4 Multistage pressure column distillation unit Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph Lhsdpfoyfhtnjx Ahbsg

Condition: used, Vertical multistage high pressure centrifugal pump GRUNDFOS. Pump as good as new, but a part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-V Year of manufacture approx. 2012 Delivery capacity at 7,2 bar: max. 10 m3/h Delivery head: max. 91.8 meters Mains connection: 400 Volt, 50 Hz Power: 3 kW - pump construction in 9 stages - made of stainless steel 1.4401 - the pump is as good as new, but there are several new pump chambers included - part of the magnetic coupling is missing suitable for drinking water supply, irrigation and drainage Packed in the original wooden box space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg Lhodpofupadjfx Ahbsg As good as new No submersible pump or submersible pump

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Lhedpfjrl U S Esx Ahbsg Not a submersible pump or submersible pump

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, pressure: 0.5 bar, We are offering this refurbished Carl water bath still - column distillery, year of manufacture 2006. Com No.: 12 276 / REV 13 976 Year of manufacture: 2006 / Refurbished 2024 Lhodpfoyux E Tox Ahbog Filling volume: 110 l Max. operating overpressure: 0.5 bar Heating: electric heating elements Power: 30 kW Water bath jacket capacity: 180 l If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Ljdpfx Aoyug R Rohbshg The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA Lhedpfxsyug Hxe Ahbsg • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Lhodpstrdyrsfx Ahbjg Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Lodpfofz Dvvox Ahbohg

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Lsdefz Ax Sjpfx Ahbohg • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Lhsdjflpmqepfx Ahbog The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Lodpfx Ahefzrapsbohg The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Lhsdpfx Ahefz A D Nobsg ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: good (used), 1 x Syspal column lifter type 600/scb-1480 for 200 and 300 litre eurobins. Located Wiltshire. UKFM1- 6623 Lhedjvq N Duepfx Ahbeg

Year of construction: 2017, condition: as good as new (ex-display), functionality: fully functional, Pharmatec Syntegon SVP 250 LF – Formulation System for Sterile and Aseptic Liquid Pharmaceuticals For sale is a Pharmatec Syntegon SVP 250 LF formulation system for Small Volume Parenterals (SVP). The sale is on behalf of Syntegon (manufacturer, formerly Bosch Packaging/Pharmatec GmbH, Dresden). Technical Specifications: - Suitable for aqueous solutions, suspensions, and emulsions - Adaptable processing: terminal sterilization, sterile filtration, aseptic compounding - 2-vessel system for batch sizes of 25–250 L (expandable up to 4 vessels) - Dosing of additives via manway under LAF or pump system - Potent actives (OEB4/OEB5) processing via high-containment valve - CIP/SIP interfaces and pre-configured automation for integration with filling lines - GMP-compliant design, suitable for cleanroom classification Pricing: - Special price: please submit your offer - Original price in 2018: approx. €1,050,000 - Current list price for similar systems in 2025/2026: €1,415,000 Completion Status & Delivery Time: - Currently, the system is not fully operational, as the automation system including software needs to be reinstalled and certain components require replacement. - Completion will be handled directly by the manufacturer Syntegon, in consultation – expected lead time is approx. 3–4 months. - For comparison: lead time for a new system is approx. 12 months. Special Features: Lhsdpfx Aexdy Erehbjg - System was originally built for exhibition purposes (demonstration unit) - Sale is directly on behalf of Syntegon, the original manufacturer - Ideal for pharmaceutical companies seeking a flexible and high-performance SVP system with a manageable delivery time.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 15,000 rpm, controller model: Heidenhain TNC430 PA, Submitting a bid obligates you to collect the machine on time, during calendar week 25! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,000 mm Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Rapid traverse rate X-axis: 20 m/min Rapid traverse rate Y-axis: 20 m/min Rapid traverse rate Z-axis: 20 m/min Spindle speed (max.): 15,000 rpm Lhjdpfx Ajy Sxkrshbjg Torque: 57 Nm Spindle power: 18 kW Work table (L x W x H): 4,500 x 2,000 x 400 mm T-slots, lengthwise: 18H12 Distance between T-slots: 250 mm Tool interface: HSK 63 F Tool clamping: hydraulic MACHINE DETAILS Control system: Heidenhain TNC430 PA Type of input current: Three-phase Power requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Fuse rating: 63 A Dimensions & Weight Machine footprint without control cabinet (L x W x H): 6,000 x 3,500 x 4,050 mm Total weight: 15,000 kg EQUIPMENT Spindle speed infinitely adjustable Tool changer TT140 measuring probe Note: Machine without enclosure. The zero-point clamping plates and other accessories shown in the pictures are not included in the scope of delivery.

Condition: used, Year of construction: 1998, functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw Lodpfewgd Rgox Ahbjhg FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Ledpfx Aoy Sazfohbshg Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2014, Table size 6000 x 1100mm, traverses X Y Z 4500 x 1600 x 1300mm, maximum workpiece weight 5000kgs, spindle taper DIN 50, toolchanger capacity 40 stations, spindle speed 5,000rpm, automatic head, Ledpfx Ahsy Ey Rtobohg swarf conveyor, 4th axis rotary table

Year of construction: 2015, condition: used, machine/vehicle number: VT2515015, 86.9 kW, disassembled, including peripherals; no guarantee of completeness! Ledpoy T Nv Isfx Ahbjhg

Condition: used, Year of construction: 2021, operating hours: 13,640 h, machine/vehicle number: 21121341, Catalog No.: 1.2, 3 shielded machining centers with plexiglass windows, each 250x300 cm, HEIDENHAIN TNC-640 control system, 6 controlled axes, tool holder SK50, table surface: 9,000x2,000 mm, max. table load: 30 tons, travel distances X/Y/Z: 8,000/1,300/2,500 mm, special equipment: universal milling head that automatically pivots continuously in 2 planes, internal coolant system, 60-position tool changer, rotary table (10 tons, 1,500x1,500 mm), clamping surface, continuously positionable, measuring probe RENISHAW, 4 clamping angles, external programming option via Mastercam, subject to prior sale. Lhjdpfx Ahoy T Nx Ajbog

Condition: used, Year of construction: 1981, faceplate diameter 3200 mm swing diameter 5100 mm turning height 2505 mm cross rail - adjustment 1500 mm max. ram stroke 1250 mm slide adjustment 2000 mm control Siemens 8 T tool changer 16 STK table load 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW weight of the machine ca. 70 t dimensions of the machine ca. 9,3 x 6,1 x 6,0 m machine is in an excellent condition!! with div. acessories (photos available) Ljdpou Sbdgofx Ahbshg machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.

Condition: used, - Intended for original Fringand ovens Lhjdpfxjxwncfs Ahbeg - Possibility of adaptation for all types of ovens - Belt dimensions: 800x2700 mm - Year of manufacture: 2001 - Serial number: 1174 The listing was translated automatically. Translation errors are possible.

Condition: good (used), Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure switch, volumetric flow controller, differential pressure controller, pressure reducing valve -Manufacturer: Samson, differential pressure regulator 2-6 bar -Type: 2440 Rg5 1/2 PN25 -Control valve: Samson Rg5 -Number: 1x controller available -Price per piece Ledpfx Ajiq Th Sjhbshg -Dimensions: 270/95/H90 mm -Weight: 1.2 kg/pc.

Condition: new, Year of construction: 2026, Cutting device Programmable boring depth shut-off Lhedpfx Aod H Rgfjhbog Boring depth and speed display - digital Threading device M20 (dependent on pitch) Infinitely variable speed from 125 - 4000 RPM in two stages, stage change via belt deflection. Boring capacity 25/30 mm Spindle MK 3 Boring depth 125 mm Overhang 280 mm Usable table surface (swiveling) 420 x 340 mm Feed rate 0-300 mm/min, infinitely variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor - three-phase 400 V, pole-reversible 0.9/1.45 kW Weight 300 kg OPTION: - Drilling package 5 consisting of: taper mandrel, drill chuck, vise, and T-slot set (€845) - Spindle stop and chip breaker module (€864) DELIVERY: free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Drilling depth and speed display – digital Thread cutting capacity M20 (depending on pitch) Stepless speed control from 125 - 4000 RPM in two stages, stage change via belt adjustment. Drilling capacity 25/30 mm Thread cutting capacity (depending on pitch) M20 Spindle MK 3 Drilling depth 125 mm Overhang 280 mm Usable table surface (swiveling) 420 x 340 mm Manual feed Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Lsded H Rffjpfx Ahbshg Motor – three-phase 400 V, pole-changing, 0.9/1.45 kW Weight 275 kg OPTION 1 - € 625.00 Drilling package 4 consisting of: - Vise [felix] 2.0 - 120 mm, clamping width 0-168 mm - Quick-change drill chuck, mount B18, 3-16 mm (accuracy 0.17 mm) Taper shank MK 3 B18 and reducing sleeve MK3 to MK 2, as well as MK 3 to MK 1 OPTION 2 - € 1,245.00 Thread cutting attachment, max. M20, adjustment of thread cutting depth via digital depth display Delivery: FREE DELIVERY, including packaging Factory warranty: 3 years NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!