Used Paller Invert for sale (1,788)

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: manual, Samzon Pile-turner 104L is a stationary machine used for changing the pallet under a product. This model is often used in the paper-industry. A major advantage with this machine is that the platforms can close-down to 320mm, which means the Samzon Pile-turner can handle very low products. Samzon Pile-turner closes around the product with platforms, tilts back by 90 degrees, the tower is released and is rotated manually 180 degrees and once again locked. The bottom platform is then lowered back down, the platforms open, and the products has been placed on a new pallet. The pallet is fed into the machine using a pallet truck or pallet jack. The pallet turner can be delivered with a variety of extra equipment and surface treatments. Tsdexyuqzopfx Ac Tjb

Condition: excellent (used), Year of construction: 2018, Premier Pallet Inverter / Pallet Turner Year 2018 Todpowt S N Rjfx Ac Tsb Electrohydraulic operation Maximum opening 1875mm Minimum opening 1050mm Load capacity 2000kg Safety fencing included The FS 1900 Pallet Inverter Primary Uses: Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure

Condition: used, Premier Pallet Inverter / Turner Model FS1600 Max opening - 1575mm, Min opening 900mm Max capacity load 7,000kg Load tables dimensions 1300mm x 1250mm Cycle time 45 seconds Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure Recover damaged materials from the bottom of a load Todpjwkhnqsfx Ac Tsb Replace wood pallets with plastic, aluminum, or other more hygienic pallets Transfer materials from a damaged pallet Change orientation for printing and other general purposes

Condition: good (used), Zeiss Primovert Inverted Microscope (Serial Number: 3841010097) WF 10x/20 eyepieces Zeiss Primo Plan-Achromat 4x/0.10 objective Zeiss Primo Plan-Achromat 10x/0.25 Ph1 objective Tjdozhidrjpfx Ac Tob Zeiss Primo Plan-Achromat 20x/0.30 Ph1 objective Zeiss Primo Plan-Achromat 40x/0.50 Ph1 objective Ph1 / 0.3 phase slider Dust cover

Condition: ready for operation (used), functionality: fully functional, SALDATRICE A FILO usata INVERTER PULSATA da 400 Amper, MIGATRONIC BDH 400, revisionata a nuovo. Tsdpfezxwzysx Ac Tsb

Condition: like new (used), functionality: fully functional, overall weight: 130 kg, SALDATRICE usata INVERTER MULTIPROCESSO 520A,MIG/MAG-TIG-MMA,CEBORA KINGSTAR 520 TS. Tsdpfxjzxwy Ne Ac Tjb

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input current: 105 A, input frequency: 50 Hz, continuous power: 55 kW (74.78 HP), Complete designation: NXP01055-A2H1SSS-A1A300000 +QGLM+FL23*DPAP+DLDE Todpfjzuzruex Ac Teb Input: Uin: 3~380-500V, 50/60Hz, 105A, 40°C Output: 3~0-UIn, 0-320Hz, 105A, 40°C Power: 55kW: 400Vac / 90HP (Ref.): 480Vac Complete documentation included This frequency inverter comes from a warehouse clearance and has never been put into operation.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Tedpezqupxsfx Ac Tjb Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Condition: used, This listing is for Nikon Eclipse TS100 Inverted Routine Microscope Tsdpfx Ajzqf Iroc Tob The unit is in full working condition and ready for immediate use This inverted routine microscope is a high-quality lab instrument manufactured by Nikon (Model: Eclipse TS100). Renowned for its crisp optics and ergonomic design, making it a standard for cell culture inspection and routine lab tasks. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: not inspected (used), functionality: unexamined, KEB frequency inverter with potentiometer KEB F5 Tsdpfszkay Aox Ac Teb 15F5A1E-350A Input: AC 3-phase 50/60 Hz 400V 31.2A UL: 480V 27.3A Output: AC 3-phase 0…599Hz 0…Uin 24A UL: 21A 17kVA

Condition: ready for operation (used), Year of construction: 2017, operating hours: 51 h, functionality: fully functional, machine/vehicle number: 641426, load capacity: 1,500 kg, We can offer you a KAUP pallet inverter, pallet turner Pallet Inverter: KAUP (made in Germany) Model: Inverter Type: 1.6T451W/0099 Machine number: 641426 Platform dimensions: 1470 x 1200 mm Maximum platform opening: 2275 mm Minimum platform opening: 280 mm Todpfx Ajykh Troc Teb Maximum stack weight: 1500 kg Motor power: 4 KW Connection: 380 volts Net weight: 2125 kg Year of manufacture: 04 / 2017 Machine dimensions (W x D x H): 3900 x 3950 x 3200 mm Transport dimensions (W x D x H): 3900 x 2300 x 2535 mm Price for the KAUP pallet inverter upon request via email This offer is valid while the machine is unsold Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: quoted net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe specializing in the trade and stock of predominantly used Kardex Remstar automated lift & carousel storage systems. We assemble and/or dismantle these systems safely using VCA-certified technicians, a service we have provided for over 33 years. Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,000 kg, load capacity: 2,000 kg, We can offer you a PREMIER pallet inverter / pile turner Pallet Inverter: PREMIER (made in UK) Model: Inverter Machine number: C06 A3096 Platform dimensions: 1365 x 1215 mm Max. platform opening: 2170 mm Min. platform opening: 1250 mm Max. stack weight: 2000 kg Motor power: 4 kW Tjdpfx Aoyi Ufxec Teb Power supply: 380 volt Machine weight: approx. 2000 kg Machine dimensions (W x D x H): 3400 x 3100 x 3100 mm Transport dimensions (W x D x H): 2500 x 2100 x 2400 mm Price for the PREMIER pallet inverter available upon request by email. This offer is valid subject to prior sale. Delivery terms: Delivery time: ex stock, subject to availability delivery: ex works Baarle-Nassau Payment: before collection Prices: quoted net, excluding VAT. Machinehandel De Leeuw BV is one of the few companies in Europe specialized in trading and stocking mainly used Kardex Remstar automatic lift and carousel storage systems. Our VCA-certified technicians have safely installed and dismantled these systems for over 33 years. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: used, Several control cabinets with frequency inverters ranging from 37 kW to 45 kW are for sale, in various designs and from different manufacturers. Details: Item No. Sch 6 Control cabinet with 37 kW Siemens S7 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S7 controllers Stock: 1 Available: immediately Power: 37 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No. Sch 15 Control cabinet with 37 kW Siemens S5 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S5 controllers Stock: 1 Available: immediately Power: 37 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No. Sch 45 Control cabinet with 45 kW Siemens S7 frequency inverter ✔️ Powerful frequency inverter for large motors / industrial applications ✔️ Ideal for mechanical engineering, pumps, fans, or conveyor systems ✔️ Complete unit installed in the control cabinet ✔️ Control panel / display available (see pictures) Technical Data: With Siemens S7 controllers Stock: 1 Available: immediately Power: 45 kW Application: Speed control of electric motors Condition: Used Scope of delivery: Control cabinet complete with frequency inverter Control unit / display Item No.: Sch 47 Todpjztl N Iefx Ac Teb Siemens S5 control cabinet, Siemens Operator Panel OP393-III ✔️ Ideal as a distribution cabinet or for individual configuration ✔️ With control elements (buttons, emergency stop, display) ✔️ Robust industrial design ✔️ Perfect for modification, expansion, or replacement With Siemens S5 controllers With star-delta circuit for 45 kW With Siemens Operator Panel OP393-III Stock: 1 Available: immediately Condition: Used, good condition (see pictures). Electrical function not tested (or to be adapted). Scope of delivery: Control cabinet as shown Control elements / installed components

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Tsdpfx Acjznz Ezj Teb Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2019, Nortec Type 817 – 2000 Stationary Pallet Turner Technical Data: Pallet size up to 1,200 x 800 mm Loading height 600 to 2,000 mm Load capacity up to 800 kp – tilting angle selectable Tjdpfx Acjzp Nw Ue Tsb 90° and 120° – Hydraulic drive for all operations – Duration for one repalletizing process: 90…120 seconds – Control system: electronic – Program sequence: automatic or in individual steps – Operation via a push-button panel – Safety switch strip on the lifting table – Electrical modification in 2019 to B + R control system

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. Tjdpfszti Tkex Ac Tjb This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, power: 37.5 kW (50.99 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 500 t, stroke length: 400 mm, operating speed: 7 mm/s, reverse speed: 60 mm/s, table width: 530 mm, table length: 4,100 mm, throat depth: 500 mm, distance table to ram: 890 mm, overall weight: 42,000 kg, - Heavy-duty press brake > 300-ton capacity per meter > ideal for high-strength alloy steels - 6 axes: Y1 / Y2 / X / R / Z / V - The upper ram has an extension (horn) of 500 mm > total bending length of 4,100 mm - Hydraulic upper tool clamping - Capable of conical bending! - Akas laser safety system - CNC crowning - Equipped with a V-Matic variable bending die (CNC control); from V40 to a maximum of V160 - The machine is floor-mounted; no foundation is required - Included: a large set of heavy-duty tooling for highly alloyed steels! - The tools are stored in a mobile cart that can be attached to the machine. The operator can then install and remove the upper and lower punches and dies manually. Brand: HACO Todozw I N Sepfx Ac Teb Model: ERM 36500 1 unit in total Bending capacity: 500 tons x 4100 mm (bending length) Electrical supply: 380V Robosoft numerical control (Macon, 4 axes, proportional valve amplifier, integrated by Muritech) Siemens S7 PLC Invertek Optidrive CP frequency inverters Baumüller servo amplifiers Motorized multi-axis back gauge with cable carrier chain Safety: Type 4 DSP Laser non-material light curtain (transmitter/receiver), CE certified Dell control screen Supplied with a large set of tooling: V-dies of various lengths, radii, and openings Work table with roller conveyors for sheet metal handling Machine is stationary, not tested under power - on-site inspection recommended before bidding Reinforced version: ram designed to support a load of 300 tons per meter Special CNC-controlled variable V-die (V40 to V160) Hydraulic clamping at the top CNC crowning Press equipped with a 500 mm horn User-friendly control via 2D touchscreen, Thurei 02E version 2025 software 2 custom-made tool carts for storing bending tools, designed for tool changes Dismantling/removal: must be carried out by a specialized company No suitable lifting equipment available on site Logistical visit essential before removal Serial number: 81599 Sale due to bankruptcy

Condition: excellent (used), Ilapak inverted flow wrapper. In lovely condition direct from UK vegetable pack house. Tjdpfx Asx Ddm Hec Teb

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. Tsdjx Dbkcjpfx Ac Tjb This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: excellent (used), Inverter, controller, variable speed drive, solar cable -Condition: very good, unused, from warehouse clearance, original packaging -Manufacturer: Aurora, PV inverters -Type: PVI-2000-OUTD-DE -Max. continuous output power: 2000 W -Number: 26 inverters available Tedpefdxqvofx Ac Teb -Price: per piece -Dimensions: 420 x 310 x 144 mm -Weight: 12 kg/piece

Condition: used, TIG and Electric Welding Machine / Inverter ESAB Type LTN 160 TIG Welding Machine for TIG and Electrode Manufacturer No. 405-423-0479 Year of manufacture approx. 2010 TIG Output 160 Amps = 35% duty cycle 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Electrode Output 140 Amps = 35% duty cycle Todpov Uragefx Ac Tob 110 Amps = 60% duty cycle 80 Amps = 100% duty cycle Power supply 230 Volts, 50 Hz, Schuko plug - Continuous power adjustment - 2-stroke and 4-stroke operation - Stick electrode operation - 12-meter TIG hose package with hand torch - Direct current only (DC) - HF ignition - Shielding gas pressure regulator - Mobile trolley with cylinder holder Space requirements L x W x H 800 x 690 x 1120 mm Weight 60 kg Good condition

Condition: good (used), Includes control module E82ZBC Input: 1(3) /N/PE AC 230/240 V, 3.0 A (3.9 A) Output: 3/PE AC 0–230/240 V / 3.0 A / 0.55 kW 0.75 hp / 0–650 Hz ID No.: 13435850 Serial No.: 0025 Application: Drive control Width: 60 mm Tjdozc Hx Repfx Ac Tsb Height: 220 mm Depth: 140 mm Weight: 1132 g Condition: good, second-hand

Condition: like new (used), functionality: fully functional, Danfoss VLT AutomationDrive FC301/302 frequency converter for 22 kW motor. Unit is unused (old stock), stored in dry warehouse conditions. Manufacturer: Danfoss Model: VLT AutomationDrive FC301/302 Motor power: 22 kW Todpfx Asyl Nwnoc Tsb Condition: New – never commissioned With control panel (LCP) Industrial heavy-duty series Suitable for pumps, fans, extruders, presses, process lines Available immediately from stock.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min Tjdpozxn Nnefx Ac Teb - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Condition: like new (used), Input: U=3x380…500V, 50…60Hz I=11.3A AC (400V) Output: U= OV…U mains Tjdpfxszcli Ij Ac Tjb f=0…180Hz I= 12.5A AC (400V) s= 8.7 kVA Application: Drive control Length: 80 mm Height: 315 mm Depth: 233 mm Weight: 4700 g Condition: Like new