Used Other Interchangable Body for sale (31,292)

Condition: new, functionality: fully functional, overall weight: 16,000 kg, maximum load weight: 13,700 kg, empty load weight: 2,300 kg, loading space width: 2,480 mm, loading space length: 7,750 mm, loading space height: 3,000 mm, machine/vehicle number: Produktpalette, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Tandem Trailer Chassis Welded steel construction with a floor assembly approximately 152 mm high; load-bearing and torsionally rigid steel frame construction. Longitudinal beam floor construction with a load-resistant outer frame and guide tunnels spaced 600 mm apart; tunnels feature guides on top and sides, tunnel height approx. 45 mm; 4 x swap body corner fittings based on a 20-foot standard. 4 side-extending/folding parking feet with dual locking mechanism for a parking height of 970 mm, with support leg rest Side door stops Rear impact protection made of flat bar Pallet stops on both sides, approx. 20 mm high with perforated profile for securing straps; loading height is reduced by approx. 20 mm Floor Screen-printed panels approx. 27 mm thick, for high point load capacity, for forklift axle load up to max. 4,400 kg Front wall/corner stanchions Approx. 2,580 mm high, remainder covered with tarp; steel corner stanchions in full-size design; release mechanism for side tarp on front wall Inner front wall additionally lined with a 1,250 mm high screen-printed panel Center stanchions 1 pair of sliding stanchions adjustable along the entire length, with 4-compartment pockets and a long pocket at the bottom. 1 pair of stanchion positions Slotting Slats 5 rows of wooden V-shaped slotting slats Rear wall/rear corner stanchions Rear steel corner stanchions extending to the bottom edge of the roof, tarpaulin attachment with round tube and tarpaulin tensioning ratchet Rear portal doors, double-leaf, each with 2 internal twist-lock latches Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps, reinforcements for stanchions Stainless steel tensioning fasteners Roof Sliding roof, rear end lift folds up, roof can be slid from rear to front, L-shaped roof rail for the automotive industry, interior width between roof rails approx. 2,490 mm, tarpaulin color: white EcoLift – lifting roof by approx. 380 mm, liftable on both sides, with gas spring assistance, Registration / Plates Country of registration: Germany Fliegl manufacturer’s certificate for body strength in accordance with EN 12642 XL, Fliegl manufacturer’s certificate for body strength in accordance with DL 9.5, pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm Fliegl manufacturer’s certificate for load securing in accordance with VDI 2700, Sheet 12 ff. Pallet stops on both sides, approx. 20 mm high; loading height is reduced by approx. 20 mm Paint Finish Frame Hot-dip galvanized, including passivation Front corner posts Hot-dip galvanized Front wall Aluminum Rear corner posts Hot-dip galvanized Lsdpfx Askt Ni Uol Iorn Rear wall White

Condition: used, machine/vehicle number: WFDFLT21802026297, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Please note that the images are archive images! The vehicle may still be in use! Further information: Fine-grained steel welded construction, front stop, adjustable and foldable lengthwise, pair of removable guide rollers, front and rear, Swap Guard - interchangeable container guide, in front of and behind each container lock, 4 container locks with sturdy outriggers for 20-foot base interchangeable containers 7.15 and 7.45, turntable with robust ball bearing, chock with holder, aluminum side impact protection, side impact protection positioned inwards for optimal clearance to the interchangeable container supports, steel underrun protection, shortened underrun protection for optimal clearance to the interchangeable container supports, lighting system mounted with protection, quarter-shell fenders at the front and half-shell fenders at the rear, without impact protection, spare wheel holder in body design, plastic toolbox Drawbar (L = 2,200 mm) with tested 40 mm drawbar eye, drawbar length, drawbar height adjustment via spring SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension 2-line compressed air braking system, color-coded line routing for easy servicing, air reservoir 208 liters, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connection lines to the tractor unit, EBS, electronic braking system with EBS connector at the front, with connection cable. (Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS!) with raise and lower valve, holding function in both lowering/raising positions, brake release function via button on the vehicle next to the raise and lower valve, to release the brake when coupled, EBS power supply must be guaranteed! 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole connector at the front, with connection cable, additional LED work lights at the rear, switched via reversing light, LED work light at the front in the middle between the beams, shining backwards, switched via reversing light Ljdpfx Alsi Ri Dzj Isrn Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, warning sign according to ECE - 70, ADR warning sign at the rear, foldable, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Please note that the images are archive images! The vehicle may still be in use!

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Please note: The images are archive images! The vehicle may be in use. Further information: Fine-grained steel welded construction, front stop, adjustable and foldable lengthways, pair of removable guide rollers, front and rear, additional 4 container locking mechanisms with robust outriggers on a 20-base for interchangeable containers 7.15 and 7.45, turntable with robust ball bearing, chocks with holder Aluminum side impact protection, steel underrun protection, quarter panel fenders at the front and half-shell fenders at the rear 1 spare wheel holder for 1 spare wheel, with wheel fastening kit in body design Drawbar with tested 40 mm drawbar eye, drawbar height adjustment via spring BPW disc brake axles, axles/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension 2-line compressed air brake system, color-coded line routing for easy servicing. Air reservoir 208 liters Spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, EBS manufacturer Wabco, electronic braking system with EBS plug at the front, with connection cable (Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS!) with raise and lower valve, holding function in both lower and raise positions 24 Volt, 4 x 3-chamber lights + 1 round reversing light + 1 round rear fog light, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pole plug at the front, with connection cable, 1 additional LED work light, at the rear, switched via reversing light, 1 LED work light at the front, in the center between the beams, shining to the rear, switched via reversing light Lsdpfoi Riz Hjx Al Isrn Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Please note: The images are archive images! The vehicle may be in use.

Condition: used, mileage: 128,118 km, power: 110 kW (149.56 HP), first registration: 11/2008, fuel type: diesel, empty load weight: 8,200 kg, overall weight: 18,000 kg, color: white, gearing type: automatic, emission class: euro3, Year of construction: 2008, Truck F. ATL Swap body lift truck Kamag Wiesel WBH 25 Engine damage! Engine has been running / little power Diagnosis Metal splinter in fuel filter and pre-filter Engine removed on pallet! Year of construction 2008 Unladen weight 8200Kg permissible total weight 18000Kg LxWxH 9300mm x 2550mm x 2900mm Euro 3 1st hand Kilometers according to previous owner 128118 You can find a video of this offer on Ledpfeqxuadjx Al Ijrn You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: new, machine/vehicle number: c3dd8c834afed73501f8074af, empty load weight: 3 kg, maximum load weight: 20 kg, overall weight: 24 kg, axle configuration: 3 axles, tire size: 385/55 r22,5, Additional Information Chassis: Swivel turntable Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locking devices with robust outriggers on a 20-foot base for 7.15 and 7.45 container Turntable with robust ball bearing race 2 support wedges with holder Aluminum side underrun protection Steel rear underrun protection Lrsdji Riyljpfx Al Ijn Half-shell fenders at the front and half-shell fenders at the rear 2 storage boxes, stainless steel, w=600/h=400/d=500 mm, with polished, lockable door 1 pair of warning panels, double LED illuminated, extendable to 3,000 mm at the rear, only at the rear 1 preparation for connector for subsequent customer installation of warning panels at the front Coupling device: Trailer swivel turntable Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length by 6 x 100 mm and lockable (drawbar length approx. 1,900 - 2,500 mm) Drawbar height adjustment via spring Axles and Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension with raise and lower valve Wheels and Tires 385/55 R22.5 According to manufacturer's choice Steel rims, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit EBS, electronic braking system with EBS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear Rotating beacon, removable 1 additional LED work light at the rear, switched via reversing light 2 LED work lights on both sides (1x left, 1x right), switched via reversing light 1 x 15-pole connector at the front, with connecting cable Country of Registration/Signs Country of Registration: Germany With Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Finish Frame hot-dip galvanized incl. passivation, 15-year warranty against rust penetration Drawbar KTL black

Condition: new, machine/vehicle number: 087c7b6bc0c6118a84279fb46, empty load weight: 4,100 kg, Additional Information Frame Steel welded construction made of fine-grain steel, hot-dip galvanized, flat platform without edge extension, the loading area slopes downwards by approx. 8° towards the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate on the bend as a cable guide, flush with the floor. For trucks with wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1,350 mm Tow Hitch Tow hitch ball head D24.8: (height from ground to top approx. 480 mm), towing capacity 2,800 kg, including assembly and electrical system with 7-pin socket Accessories / Modifications 2 holders for wheel chocks, aluminum side impact protection, foldable - taken over from the truck! Lrsdpfji Riytsx Al Ion Steel underrun protection, quarter-shell fenders with mud flaps - taken over from the truck! Storage Box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included). 1 holder for 3 pieces of gasoline canisters 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, including lock, contains control valve and electro-hydraulic pump unit. Control box with all-around door seal and sealing sleeves on the back (splash-proof according to technical possibilities) Electrical System Adaptation of the existing tail lights, 2 additional LED work lights, recessed in the front panel, switched via parking lights with a switch on the front panel on the left, 1 LED work light at the rear, with integrated reversing camera including color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pin 12V socket = adapter Floor Mega Grip made of interlocking, galvanized grating, steel grating 50/4 including with mesh size 50 mm. Top surface with anti-slip interlocking, continuously laid across the entire main frame platform Tie-Down Eyes 12 pairs of tie-down eyes attached to the outer frame, freely swiveling - 10 tons each, 1 at the very front and the last at the very back. 1 tie-down eye at the very back in the middle for attaching the winch cable 12 tie-down eyes recessed in the middle of the floor, 5 tons each (not in the rear slope) Front Wall Front wall made of steel sheet, height 1,500 mm. Fixed with corner pillars at the height of the front wall. Each with 2 x 12 tie-down loops for lashing chains mounted on the left and right on the front wall. Winch Electric winch, 24 volts, pulling force approx. 6350 kg, mounted in the middle at the front wall (recessed with loading bridge), operated with a remote control, cable length min. 35 m x 9.5 mm, with cable guide, with cable pressure plate, including overload protection, cable free-running clutch, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer test report, test book, operating instructions. Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading ramps), electro-hydraulically foldable and laterally adjustable - including electro-hydraulic pump unit. Ramp angle approx. 8° with lowered rear axle. Ramp support made of steel grating, hot-dip galvanized (like the floor of the loading bridge), with anti-slip interlocking. Ramps can be pushed together to approx. 170 mm, ramp extension hydraulic. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp tip offset (nose min. 150 mm) for supporting on loading ramps. Labeling

Condition: new, machine/vehicle number: c78894767223a51dd199030f3, empty load weight: 4,600 kg, Further Information Frame Steel welded construction made of fine-grained steel, hot-dip galvanized, flat platform without raised edges, the loading area slopes downwards by approx. 8° towards the rear axle. Longitudinal beams made of steel profiles, steel frame hot-dip galvanized, with a stainless steel plate at the bend acting as a cable guide – flush with the floor. For trucks with wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4,105 mm and 3rd to 4th axle 1,350 mm Tow Hitch Tow hitch ball coupling D24.8: (height from ground to top edge approx. 480 mm), towing capacity 2,800 kg, incl. mounting and electrical system with 7-pin socket Accessories/Modifications Lrodpfxjk Unitj Al Ijn 2 holders for wheel chocks, aluminum side underrun protection, foldable – taken over from the truck! Steel underrun protection, quarter-shell mudguards with splash flaps – taken over from the truck! Storage Box Plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. (Lock not included) 1 holder for 3 gasoline cans 1 stainless steel storage box, w=600/h=400/d=500 mm, with polished door, incl. lockable, contains control valve and electro-hydraulic pump unit. Control box with all-round door seal and sealing sleeves on the back (splash-proof according to technical feasibility) Electrical System Adaptation of existing tail lights, 2 additional LED work lights, recessed in the front panel, switched via parking lights with a switch on the front panel on the left side, 1 LED work light, at the rear, with integrated rear-view camera incl. color flat-screen monitor, screen with suction cup holder and power supply via 24 volts, voltage divider 24/12V, 1 7-pin 12V socket = adapter Floor Mega Grip made of interlocking galvanized grating, steel grating 50/4 incl. with a mesh size of 50 mm. Top side with anti-slip interlocking, continuously installed over the entire main frame platform Tie-Down Rings 12 pairs of tie-down rings hanging freely in the outer frame - each 10 tons. 1 x at the very front and the last one at the very back. 1 tie-down ring at the very back in the middle for attaching the winch cable 12 tie-down rings recessed in the center of the floor, each 5 tons. (not in the rear slope) Front Panel Front panel made of steel sheet, height 1,500 mm. Fixed with corner pillars at the front panel height. 2 x 12 tie-down loops for lashing chains mounted on the left and right of the front panel Winch Electric winch, 24 volts, pulling force approx. 6,350 kg, mounted in the center at the front panel (recessed with loading bridge), operated with a wireless remote control, cable length min. 35 m x 9.5 mm, with cable guide roller, with cable pressure plate, incl. overload protection, cable free-spool coupling, hand switch with approx. 5 m control lever, acceptance of the winch, civil engineer inspection report, inspection certificate, operating manual Ramps Length 3,500 mm - 2-piece (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also when loading via ramps), electro-hydraulically foldable and laterally adjustable - incl. electro-hydraulic pump unit. Ramp angle approx. 8° with the rear axle lowered Ramp surface made of steel grating, hot-dip galvanized (like the floor of the loading bridge), with anti-slip interlocking. Ramps can be slid together to approx. 170 mm, ramp extension hydraulically. Ramp designed for operation on a loading ramp with full load capacity. Ramp locking with 2 tension straps. Ramp end offset (nose min. 150 mm) for su

Condition: used, functionality: fully functional, machine/vehicle number: 1412A1, mileage: 48,477 km, power: 163 kW (221.62 HP), first registration: 07/1999, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: green, gearing type: mechanical, emission class: euro2, Year of construction: 1999, Equipment: ABS, all wheel drive, compressor, trailer coupling, TUV and AU are made NEW ! ! Special army version with long wheelbase and leaf springs r 16.222 FA is in a super good condition, also the body is in a super condition ! ! ! The MAN are directly from the military in original condition ! ! ! ! Ready for immediate use, was very well maintained and serviced by the military !!! Equipped with: Manual gearbox with 8 gears plus off-road reduction , tipper cab , permanent all-wheel drive with differential lock center and rear , 7 tons winch, which can pull either forward or rearward , plastic shelter with large air conditioning system (inside dimensions L / W / H 4890 / 2020 / 1940 mm).e L/W/H 4890 / 2020 / 1940 mm)this sits on a frame with storage boxes at the front and balcony with railing at the rear, the frame is fastened with 4 twistlocks, the MAN has 8 twistlocks on which a 1 x 20 foot container or 2 x 10 foot containers can be fastened and has a double-axle. Container can be attached and has the dimensions L/W 5850 x 2255 mm and 2 x 2790 x 2255 , the MAN 16.222 has a military trailer hitch with test mark , think that the Tuv will register you on request , diesel engine with 6871cm? displacement, (truck approval 3 seats in front), super good tires with the size 365 / 85 R 20, and much more. Ideal as a rally vehicle or hobby vehicle, WOW and a huge pleasure to drive! ! ! Several other all-wheel drive vehicles and other military vehicles are still available in my offer. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call . - Many greetings from Philipp in the Hanfbach valley Lrodpfxoqx Sxtj Al Ien

Condition: new, machine/vehicle number: 003, empty load weight: 2,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, Year of construction: 2026, Equipment: ABS, Kögel Combi interchangeable semi-trailer; - New vehicle - turntable - GVWR 18,000 kg - for a parking height of 1220-1320 mm - unladen driving height 1255 mm - 40 mm drawbar eye - BPW axles, 2x9 tons, disc brakes, ET 120 (partially also with SAF axles) - lifting and lowering - tire size 385/-, choice of manufacturer - optionally also with 385/55 tires - ABS-EBS - warning signs ECE-R70, 2 pcs. - Kögel KTL system, corrosion-protected (Nano Ceramic) Prices are quoted excluding 19% VAT, ex works. Offer is subject to change, errors and omissions excepted, and subject to prior sale. Leasing/financing/hire purchase are possible, subject to credit check. Leasing from EUR 273.00 per month, plus 19% VAT. Lrjdsg Dkwrjpfx Al Ion We are available to answer any questions you may have at any time. Images are for demonstration purposes only and may show optional equipment that incurs an additional charge.

Condition: new, machine/vehicle number: 002, overall weight: 18,000 kg, tire size: 445/45r19.5, color: black, Year of construction: 2026, Equipment: ABS, center pivot plate, Krone interchangeable semi-trailer, type AZW 18 eL3B7; - New vehicle - turntable - GVWR 18,000 kg - for parking height 1020-1320 mm - unladen driving height 1080 mm - 40 mm drawbar eye Lrsdpfxsg Dkwvj Al Ion - BPW axles 2x9 tons, disc brakes, offset 120 - lifting and lowering - tire size 445, customer's choice of manufacturer - alternatively also available with 435/ - E-wheel holder - ABS-EBS - KTL primed and powder-coated, deep black Prices are quoted excluding 19% VAT, ex works. Offer is subject to change, errors and omissions excepted, and subject to prior sale. Leasing/financing/hire purchase are possible, subject to credit check. Leasing from EUR 294.00 per month, plus 19% VAT. We are available to answer any questions you may have at any time. Images are for demonstration purposes and may show optional equipment that is subject to an additional charge.

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, tire size: 385/55r22.5, Year of construction: 2026, Equipment: ABS, Krone interchangeable trailer, type ZZW 18 eLE10; - New vehicle - tandem axle - GVWR 18,000 kg Lredpfxeg Dkwnj Al Ion - for coupling height 1070-1320 mm - unladen ride height 1090 mm - 50 mm drawbar eye, extendable 4x100 mm - BPW axles, 2x9 tons, disc brakes, offset 120 (partially also with SAF axles) - lifting and lowering - tire size 385/ Krone Easy Rider - alternatively also with 435 or 445 tires - electric wheel chocks - ABS-EBS - warning signs ECE-R70, 2 pieces - KTL primed and powder-coated, deep black Prices are quoted excluding 19% VAT, ex works. Offer is subject to change; errors, modifications, and prior sale are reserved. Leasing/financing/hire purchase is possible, subject to credit check. Leasing from EUR 344.00 per month plus 19% VAT. We are available to answer any questions you may have at any time. Images are for demonstration purposes only and may show optional extras at an additional cost.

Condition: new, machine/vehicle number: 001, empty load weight: 2,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, suspension: air, tire size: 385/65r22.5, Year of construction: 2026, Equipment: ABS, center pivot plate, Krone interchangeable trailer, type AZW 18 eL3B9; - New vehicle - Turntable - GVWR 18,000 kg - for coupling height 1220-1320 mm - unladen ride height 1255 mm - 40 mm drawbar eye - BPW axles 2x9 tons, disc brakes, offset 120 (partially also with Krone axles) - lifting and lowering Lodpfx Aog Dkwyel Isrn - tire size 385/ Krone Easy Rider - optionally also with 385/55 tires - E-wheel holder - ABS-EBS - warning signs ECE-R70, 2 pieces - KTL primed and powder-coated, deep black Prices are quoted plus 19% VAT, ex-works. Offer is subject to change, errors, modifications and prior sale reserved. Leasing/financing/hire purchase are possible, subject to credit check. Leasing from EUR 259.00 per month plus 19% VAT. We are available to answer any questions at any time. Images are for demonstration purposes and may show optional extras that incur additional costs.

Condition: used, machine/vehicle number: NEW-4, maximum load weight: 13,000 kg, overall weight: 16,000 kg, first registration: 06/2010, loading space length: 7,250 mm, loading space width: 2,450 mm, loading space height: 2,750 mm, Year of construction: 2010, * Year of construction: * Type Krone WK 73 RST * Fixed roof * Telescopic support legs * Aluminum roller door * Double floor Lrjdpfx Alsp R Rxgo Isn * Total weight: 16,000 kg * Empty weight: 3280 kg * Payload: 12,720 kg * Internal dimensions: L=7250 mm, W=2480 mm, H=2750 mm * Floor is made of screen-printed floor * Insides are made of keyhole sheet metal Several swap bodies in stock at all times, Jumbo and Standard IMAGES ARE EXAMPLE IMAGES Delivery possible for an additional charge Financing possible on request If you have any questions, please contact us at Opening times: Mon.-Fri. 8 a.m. to 2 p.m. Or by arrangement Price is NET If you purchase several swap bodies, the price is negotiable Invoice with VAT shown will be issued upon sale. Location: Im Gewerbepark 11 99441 Umpferstedt

Condition: used, machine/vehicle number: 331, empty load weight: 2,700 kg, maximum load weight: 15,300 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2012, suspension: air, tire size: 385/65 r 22,5, color: black, Equipment: ABS, * Disc brake * EBS * BPW axles Lrsdemcchujpfx Al Ien * Lifting and lowering device Errors excepted

Condition: used, machine/vehicle number: 468, empty load weight: 2,810 kg, maximum load weight: 15,190 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2007, suspension: air, tire size: 455/40 r22,5, wheelbase: 5,000 mm, color: black, Equipment: ABS, * Disc brake * EBS (Electronic Braking System) * SAF axles * Lifting and lowering mechanism Lodpelgzt Rjfx Al Isrn Errors and omissions excepted.

Condition: used, machine/vehicle number: 348, empty load weight: 2,740 kg, maximum load weight: 15,260 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2003, suspension: air, tire size: 385/65 r22,5, wheelbase: 4,900 mm, color: grey, Equipment: ABS, Disc brake Lrodpfxsn I Rl Ae Al Ien EBS Lifting and lowering device SAF axles Errors excepted

Condition: used, mileage: 925,000 km, power: 95 kW (129.16 HP), first registration: 04/2004, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 18,000 kg, overall weight: 27,500 kg, tire size: 295/60r22.5, axle configuration: 2 axles, wheelbase: 4,800 mm, color: white, gearing type: automatic, emission class: euro3, suspension: air, Year of construction: 2003, operation weight: 18,000 kg, Equipment: additional headlights, hydraulics, trailer coupling, Operating machine for moving swap bodies, trailers and semi-trailers Ljdpfopa Uyljx Al Isrn Bosch Rexroth hydrostatic transmission Mercedes OM904LA engine 18.500h Usable with B license

Condition: used, machine/vehicle number: 3, empty load weight: 5,000 kg, maximum load weight: 33,000 kg, overall weight: 38,500 kg, axle configuration: 3 axles, first registration: 09/2019, loading space length: 9,200 mm, loading space width: 2,549 mm, suspension: air, tire size: 385.65 r 22.5, color: black, Year of construction: 2019, Equipment: ABS, serious extendable container porrtacontainer semi-trailers, year 2019, 3 saf disc axles with 1st liftable, front and rear double extension extendable chassis by joining the extensions with central beam, transports containers from : 1 x 20 flush post 1 x 20 flush post over neck, 1 x 30, 1 x 40, 1 x 45, hi cube and swap bodies from 6.0m to 13.60m, ship hooks , ADR complete, n°3 equal units available except sold-CONCESSIONARY INTERDRIVE SRL-PARMA Lrodpfx Ajqvl Sfjl Ijn

Condition: like new (used), functionality: fully functional, Year of construction: 2012, color: white, overall weight: 16,000 kg, maximum load weight: 12,800 kg, empty load weight: 3,200 kg, loading space volume: 56 m³, loading space width: 2,480 mm, loading space length: 7,700 mm, loading space height: 2,930 mm, MOBILE IRON BOX WITH PLYWOOD SIDE WALLS RAILWAY PLATE REPAINTED IN WHITE RAL 9010 LEG HEIGHT: 93 cm 2 UNITS AVAILABLE Lsdoxax Epjpfx Al Isrn

Condition: used, empty load weight: 3,150 kg, maximum load weight: 14,850 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2022, loading space length: 7,450 mm, loading space width: 2,550 mm, loading space height: 2,750 mm, loading space volume: 43 m³, suspension: air, tire size: 425/65r22.5, wheelbase: 4,800 mm, color: silver, Equipment: ABS, had accident, VARIOUS UNITS Semi-trailers for swap bodies, 7.15/7.45 meters, with overhauled mechanics and electrical system. Tires with 70% tread remaining. ABS/EBS – to be checked. Drum brakes. Lrodpfji Etk Njx Al Isn Ideal for local work or modification/change of intended use. 6 units available, subject to prior sale.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, operating hours: 8,200 h, Equipment: additional headlights, hydraulics, MAFI container transporter MTL18 Equipped with VOLVO PENTA engine BOSCH hydrostatic transmission Fully functional and currently in operation Minimum platform height 85 cm from ground Tyres at 70% tread remaining Air compressor recently replaced Lodpfxow Aqcue Al Ijrn Serviced in July 2025 Excellent for any type of swap body/container body

Condition: excellent (used), functionality: fully functional, mileage: 703,000 km, power: 338.33 kW (460.00 HP), first registration: 05/2025, fuel type: diesel, maximum load weight: 8,900 kg, overall weight: 18,000 kg, tire size: 315/17r22.5, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2017, Equipment: ABS, air conditioning, compressor, cruise control, onboard computer, traction control, DAF XF460 FA - 180 Q.li – FULL AIR SUSPENSION – Trailerable CHASSIS XLRAEH4300G153953 - REGISTRATION FJ211ZP Year 30.05.2017 – EURO 6 – 703,230 KM Tyres: Size: 315/70 R22.5 – 80% worn Wheelbase 5,400 mm – Payload 89.70 Q.li Lrodpfx Aox Azqtsl Ion Truck equipment: Sleeper cab with double bed, automatic climate control, fridge, sunroof, electric windows, air-suspended and heated seat – 620-liter tank – Webasto heater Body configuration: SWAP BODY – Mounting distance 586 cm TRAILER COUPLING – ROCKINGER type 500 at 66,000

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,127 h, pressing force: 138 t, stroke length: 200 mm, total width: 1,750 mm, total height: 2,550 mm, overall weight: 10,200 kg, controller manufacturer: DELEM, controller model: DA-66T CNC, product length (max.): 3,640 mm, number of axes: 6, This 6-axis RICO PRCN Synchro 30135 was manufactured in 2013. It features a press force of 1350 kN and a bending length of 3100 mm. The machine is equipped with a powerful 11 kW motor and offers advanced CNC controlled bending aid systems. If you are looking to get high-quality bending capabilities, consider the RICO PRCN Synchro 30135 press brake we have for sale. Contact us for further details. • Distance Between Side Frames: 2600 mm • Motor Power: 11 kW • Open Height: 400 mm • Throat Depth: 400 mm • Approach Speed: 200 mm/s • Working Speed: 0–10 mm/s • Return Speed: 150 mm/s • X-Axis Speed: 500 mm/s • X-Axis Positioning Accuracy: ±0.05 mm • R-Axis Travel: 150 mm • R-Axis Speed: 170 mm/s • R-Axis Positioning Accuracy: ±0.20 mm • R-Axis Repeatability: ±0.20 mm • Z1-Z2 Travel Range: approx. 2500 mm • Z1-Z2 Speed: 2000 mm/s • Z1-Z2 Positioning Accuracy: ±0.10 mm • Z1-Z2 Repeatability: ±0.10 mm • Laser Safety System: Fiessler AKAS LC-II F • Hydraulic System: Hoerbiger • Product and Tool Memory: 64 MB • Interfaces: 2 × USB, RS232C, Network Interface, PLC Interface • Independent Z1-Z2 Finger Positioning: Yes • Free-Moving Right Backgauge Finger: Yes • Right Finger Travel Range: 200 mm • Relative Right Finger Adjustment: +100 mm / -100 mm • Pneumatic Sheet Support Arms with Ball Rollers: Yes • CNC Controlled Bending Aid System: ACF1 • Number of Motorized Bending Aids: 2 • Bending Aid Load Capacity: approx. 150 kg per unit • Bending Aid Support Range: approx. 900–1500 mm • Bending Aid Width per Arm: approx. 350 mm • Bending Aid Height Adjustment: ±60 mm • Bending Aid Depth Adjustment: 0–60 mm • Bending Aid Accuracy: ±0.2 mm • Support Arm Working Area: 500 mm • Maximum Box Height with Raised Tooling System: up to 240 mm • Tool Clamping: Pneumatic Upper Clamping • Operating Hours: approx. 11,270 h Technical Specification Bending Length 3100 mm Lsdpfxezgggno Al Isrn

Year of construction: 2008, condition: ready for operation (used), pressing force: 163 t, stroke length: 700 mm, Hydraulic 4-Column Press manufactured in 2008. This Hymag HS 4 160 features a press force of 1,600 kN and a stroke of 700 mm, making it suitable for metal pressing applications. It is equipped with a PLC-controlled system for enhanced operation. If you are looking to get high-quality metal forming capabilities, consider the Hymag HS 4 160 machine we have for sale. Contact us for further details. • Manufacturer: Hymag • Machine Type: Hydraulic 4-Column Press • Hydraulic Pressure: 280 bar • Main Motor Power: 55 kW • Voltage: 400 V • Current: 96 A • Secondary Motor Power: 7.5 kW • Voltage: 400 V • Current: 15 A Lrjdpfjzd Ez Eox Al Ion • Oil Capacity: 600 L • Control System: PLC-Controlled Hydraulic Press

Year of construction: 2013, condition: ready for operation (used), pressing force: 163 t, stroke length: 700 mm, Hydraulic 4-Column Press manufactured in 2013. This Hymag HS 4 160-K features a press force of 1,600 kN and a stroke of 700 mm, making it suitable for metal pressing and forming applications. With a main motor power of 55 kW, this machine is designed for efficiency and reliability. If you are looking to get high-quality metal pressing capabilities, consider the Hymag HS 4 160-K machine we have for sale. Contact us for further details. • Manufacturer: Hymag • Machine Type: Hydraulic 4-Column Press • Application Type: Metal Press / Forming Press • Hydraulic Pressure: 305 bar • Main Motor Power: 55 kW Ledpfjzd Ezlsx Al Iorn • Voltage: 400 V • Current: 105 A • Secondary Motor Power: 7.5 kW • Voltage: 400 V • Current: 15 A • Cooler Motor Power: 1.5 kW • Voltage: 400 V • Current: 5.1 A • Oil Capacity: 600 L