Used Otech Gmbh Manipulator for sale (68,865)

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: WT 1104, total height: 3,421 mm, total width: 4,704 mm, total length: 9,550 mm, load capacity: 200 kg, construction height: 3,421 mm, Vacuum Turning Portal for Panels The turning unit offers two different "automatic" operating modes: I. Component is conveyed without rotation The component is only shifted laterally, aligned to the reference edge (zero line) of the machining center, and then fed further to the CNC machining center (BAZ). II. Component is conveyed with rotation The component is shifted laterally and rotated along its longitudinal axis before being fed further to the CNC machining center. Each function can also be manually controlled in "manual" mode. SPECIFICATIONS: Rsdpsyta R Ujfx Afnst Max. panel dimensions: LWH: 8000mm x 2500mm x 100mm Max. weight: 200kg Min. panel dimensions: LWH: 1500mm x 1500mm x 12mm The turning portal is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the panels. The panels are always lifted via suction, then either moved horizontally to the zero line of the machining center or additionally rotated 180° en route before being delivered to the reference edge. The rotational movement is monitored via absolute encoders; the lateral positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm with roller diameter 108 mm, is fitted with material-friendly rubber rings and is driven by a SEW gear motor. Control of the roller table is via frequency inverter, adjustable speed up to 45 m/min. GENERAL INFORMATION: The entire area is enclosed by fencing; the longitudinal side of the system is secured by two sliding doors, which are safety-monitored. An operator touchpanel (12") is integrated into the fence area. The installed PLC (Siemens S7-1500) is programmed with three modes: • Automatic operation • Manual operation • Maintenance operation Input signals, loading side: – Start roller table – Rotate yes/no – EMERGENCY STOP complete system Input signals, unloading side: – Start roller table – EMERGENCY STOP complete system System output signals: – EMERGENCY STOP complete system – Panel infeed confirmed

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Rsdpfx Afourlcrenst Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition, see the functional video after the overhaul and is sold with the 12 months OBM parts warranty. Rjdpeu Th S Sefx Afnot Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, We are offering this display machine SM Innotech Laminator Incapcell 35-18, year of manufacture 2018. Rjdpfx Aoy Druuofnot Manufacturer: SM Innotech GmbH & Co.KG Model: Incapcell 35-18 Year of manufacture: 2018 Condition: Display machine Category ID: 33 Machine type: Laminator There are 2 units of this system available; both are new as they have never been used. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2019, condition: used, We are offering this used SM Innotech GmbH & Co.KG Incapcell 22-18 laminator, year of manufacture 2019. The system has very low operating hours, as it was used as a test machine for trial purposes. Individual software updates or other modifications can be provided according to requirements and at additional cost. The system is available for immediate delivery. Rjdpfjy Dq D Isx Afnjt If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Rjdpfjwnm Ukox Afnst Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Redsrc Hiiopfx Afnst

Condition: used, Year of construction: 2004, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: DRI 04320080, mileage: 100 km, overall weight: 7,000 kg, fuel type: diesel, color: blue, operation weight: 14,000 kg, maximum load weight: 15,000 kg, chain condition: 50 %, bar diameter (max.): 61 mm, pipe diameter (max.): 400 mm, Equipment: cabin, hammer hydraulics, rubber tracks, German horizontal directional drilling rig capable of drilling up to 200 meters in length, with a thrust/pull-back force of 15 tons plus impact (28 tons) with hydraulic hammer. Rubber tracks, max speed 3 km/h. Suitable for trenchless installation of pipes up to diameter 400 mm underground. Drilling depth up to 5 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, year 2004, 7,800 operating hours. Main components: - Hydraulic-driven carriage for rods, HATZ 4-cylinder diesel engine, operator cabin - 3 rod containers, each with 48 drill rods x 3 meters = 144 rods (432 meters total) Control options: 1. Rod handling manipulator 2. Semi-automatic rod gripper and pulling system Mixing system (8056D) with hydraulic station (TT-M2) DRI 8904.B, Deutz 4-cylinder diesel engine, bentonite pump P-72, two bentonite preparation tanks (each 4,000 liters), two BÖRGER rotary pumps for mixing Connection cable for mixing unit Bentonite hose reel 2 x drill heads Ø110 reamer, 5t swivel Ø280 reamer with swivel, Ø315 with swivel, Ø385 with swivel Eclipse navigation system Rodpfx Afsy H H Uusnst New spare working components (adapter, shaft, sleeve) Price incl. VAT.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Overband Magnet Type UB 600 Operating voltage 3x400 V Frequency 50 Hz Rated operating current 5 A Redpexy Hl Dsfx Afnot Operating speed 30 – 90 rpm Maximum sound pressure level 50 dB Machine weight 750 kg Location: Austria Available immediately

Condition: like new (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, input voltage: 240 V, measuring range X-axis: 2 mm, measuring range Y-axis: 1 mm, measuring range Z-axis: 1 mm, Microscopic 3D inspection scanner with measurement envelope of 1.6 x 1.2 x 0.8mm, height resolution 0.1 µm. The unit can take linear measurement in 3 dimensions and also measure edge radius between approximately 5µm and 100µm. It is complete with laptop loaded with the necessary software, dongle, and microscope stand. It has only been lightly used. Laptop: Dell with Windows 10 Rodpfsy Int Uex Afnet

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2132072, REF: MM6195 1 x Foodlogistik GmbH high-capacity dicing machine supplied with dicing multigrid. This is a fantastic high-throughput dicer for dicing fresh, tempered and cooked meat, poultry or fish. Can also be used for cheese, vegetables and fruit. Technical specification ⚙️ ✅ Manufacturer - Foodlogistik GmbH ✅ Model - DICR CAPACITY 126. ✅ Serial number - 2132072. ✅ Date of manufacture - 2013. ✅ Throughput / capacity - up to 3,000 kg/h depending on product. ✅ Product temperature range - -3C to +60 C. ✅ Chamber dimensions - 530mm long x 126mm wide x 126mm high. ✅ Electrical requirements - 400-415 V / 50 hz / 3 phase. ✅ Power - 5.6 kW. Dicing grid - multigrid, currently set up for 10mm cubes. ✅ Condition - very good, last used in June 2025. Rodpfx Ajxfll Tjfnst

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. Rjdoyizxrjpfx Afnot All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Rjdpfxsu Tha Io Afnst Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Rodeu Thh Eepfx Afnot Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm Rodpfx Ajx A U Ncefnjt • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1 x Reich GmbH stainless-steel fixed table bandsaw for cutting typically used for cutting meat. Supplied with several spare parts and new blades. Model - Profi 400. Serial number - 400 1141. Date of manufacture - 2005. Rsdjyzxd Repfx Afnot Size of blade - 3204mm x 16mm. Electrical requirements - 400 V / 50 hz / 3 phase.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Mini Cube Nero 1.0 from Villex Container GmbH is a versatile 4.0-meter container that combines a compact footprint with a surprisingly spacious interior. Measuring 4.0 m in length, 2.4 m in width, and 2.6 m in height, this model offers more space than smaller alternatives while remaining easy to transport. Its 5 cm thick insulation ensures effective thermal protection, while the anthracite-colored panels and base frame (RAL7016) provide a modern and stylish look. The container is equipped with a robust steel door and a standard window (1000 x 1000 mm) for ample natural light. Electrical fittings include a 32A CEE plug, three double power sockets, two LED lights, and a light switch. Weighing just 800 kg, the Villex Mini Cube Nero 1.0 is lightweight, highly portable, and suitable for a wide range of applications. Article number: MINCN1.0 Version: 4.0 m container Length: 4.0 m Width: 2.4 m Height: 2.6 m Insulation thickness: 5.0 cm Rjdpsy H Huzofx Afnst Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 800 kg Doors: 1 steel door Windows: 1 standard window (1000 x 1000 mm) Electrics: 32A CEE plug, red; 3 double sockets; 2 LED lights & 1 light switch

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, overall weight: 800 kg, loading space width: 2,400 mm, loading space length: 4,000 mm, loading space height: 2,600 mm, Equipment: lighting, We are offering our Villex Mini Cube Nero 2.0 container in this listing, which can be used as an office container, school container, kindergarten container, refugee container, residential container, or construction site container. Dimensions: 4.0 x 2.4 x 2.6 m Delivery: Nationwide delivery available Standard Features: Condition: New & Fully Assembled Exterior color: RAL 7016 (anthracite) Exterior wall thickness: 50 mm Area: 9.6 m² Weight: 800 kg 1x entrance door (205 cm x 105 cm) 1x double window -> single sash, fixed glazing, and tilt function Electrical installation: Rodoy Egq Hjpfx Afnjt 6x electrical outlets (3x double sockets), circuit breaker + protection, surface-mounted conduit (PVC) We manufacture your container fully customized to your specifications! Optional features available at surcharge: Custom sizes, e.g., 7x3 m, 4x2.4 m, double containers, triple units, and more Different window sizes Various exterior and floor colors Practical forklift pockets Lighting Roller shutters Heating WC, shower, toilet, wash basin Kitchen Plastered interior walls And much more Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance by PayPal or bank transfer. Nationwide delivery time is typically around 1–3 weeks after receipt of order, depending on the destination postcode area. Custom containers are manufactured and delivered within 1–4 weeks.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 2,500 mm, loading space length: 6,000 mm, loading space height: 2,550 mm, Equipment: lighting, The Villex X-Series Black Short 1.0 from Villex Container GmbH is a premium 6.0-meter office container distinguished by its well thought-out features and modern design. Measuring 6.00 m in length, 2.50 m in width, and 2.55 m in height, it offers a versatile usable area of approximately 15 m² – perfectly suited as a mobile office, meeting room, or temporary workstation. Its robust construction with 75 mm thick sandwich panels provides excellent thermal insulation, making the container suitable for year-round use, even under extreme weather conditions. The sophisticated combination of anthracite panels (RAL 7016) and a deep black base frame (RAL 9005) give the container an elegant, striking appearance. Two large aluminium windows (1000 x 1000 mm) with integrated fly screens ensure plenty of light and air, providing not only natural daylight but also effective insect protection. A sturdy steel door (RAL 9005) guarantees security and durability in everyday use. In terms of electrical equipment, the Villex X-Series is fully outfitted: with a 32 A CEE heavy-duty power connection, five power sockets, two LED lights and one light switch, the container is immediately ready for use – whether for technical equipment, workspace lighting, or IT infrastructure. Despite its solid build, the container weighs only 1,500 kg, making it flexible and easy to transport. Rsdpfx Asy H Em Nsfnst Article number: XSERS1.0 Variant: 6.0 m container Length: 6.0 m Width: 2.50 m Height: 2.55 m Insulation thickness: 7.5 cm Panel colour: RAL7016 (anthracite) Base frame colour: RAL 9005 (black) Weight: 1500 kg Doors: 1x door (steel) Windows: 2x windows with fly screens (1000 x 1000 mm) Electrics: 5 power sockets, 2x LED, 32A CEE plug & 1x light switch

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 5,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Medium Sales Container Cube Nero 1.0 from the Nero-LINE series is a compact and functional sales unit, measuring 5.0 meters in length, 3.0 meters in width and 2.6 meters in height. Its robust construction and modern design in RAL7016 (anthracite) provide a sophisticated appearance, while the 5.0 cm thick insulation ensures efficient thermal performance. The container is equipped with a sturdy steel door insulated with mineral wool and a large sales window (4000 mm x 1200 mm) including roller shutters, making it ideal for mobile retail or food service applications. Electrical equipment features a 32A CEE power connector (red), three double power sockets, two LED lights, and a light switch—ensuring the sales area is well-lit and ready for use. A sales counter is included in delivery and supplied separately; installation is to be carried out by the customer on site, as a permanently installed counter would require a special permit for crane-truck transport. With a weight of 1,100 kg, the container is both stable and versatile—perfect for events, markets, or stationary sales. Individual customization is available upon request. Item number: MEDVKCN1.0 Area: 15 m² Variant: 5.0 m container Length: 5.0 m Width: 3.0 m Height: 2.6 m Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 1,100 kg Doors: 1x door (steel) Windows: 1x sales window incl. roller shutters (4000 mm x 1200 mm) Redpfx Aey Hrm Aofnot Electrics: 32A CEE plug (red), 3x double sockets, 2x LED lights & 1x light switch Equipment: 1x sales counter (counter supplied loose and to be assembled by customer)

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, overall weight: 600 kg, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 2,600 mm, Equipment: lighting, Turnkey assembled, in stock & available for immediate delivery Redpfx Aey Egt Ijfnst Dimensions: Length: 3.0 m Width: 2.4 m Height: 2.6 m External area: 7.2 m² Insulation thickness: 5.0 cm Colours: Panel: RAL 7016 (anthracite) Base frame: RAL 7016 (anthracite) Wood cladding: RAL 7016 Weight: 600 kg Door: 1x PVC glass door, double glazed Windows: none Electrical installation: In accordance with VDE standard 3-phase, 32A CEE plug (red) 2x double sockets Lighting: 1x lamp 1x light switch Air conditioning: Split unit for heating and cooling, included in the price ----- Optional additional equipment (for an extra charge): Double-wing doors: For wider access and greater transport options. Additional doors: Flexible access points. Additional windows: Increased ventilation and daylight. Additional double windows: Improved thermal and sound insulation. Additional floor-to-ceiling windows: Modern design and generous lighting conditions. Roller shutters: Privacy and sun protection for adjustable light control. Glass façade: Bright appearance with fully glazed front. Woodstyle façade: Timber-look finish for a warm and aesthetic appearance. Divided rooms: Flexible usage options thanks to additional room separation. WC: Integrated sanitary facility for greater comfort. Shower: Addition to sanitary unit, ideal for longer stays. Air conditioning: Additional heating and cooling functions. Insulation: Choice of 50 mm, 60 mm, 80 mm, 100 mm or 120 mm. Forklift pockets: For easier transport with forklifts. ----- Delivery: Nationwide delivery with crane vehicles available. To calculate a delivery price, please provide your postal code. Delivery time: 1-4 weeks, depending on distance and availability (standard containers or custom builds).

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Big Cube Block Line Black 2.0 by Villex Container GmbH is a modern 6.0-meter office container featuring the BLOCK-LINE design, known for its robust construction and versatile applications. With a length of 6.0 m, width of 3.0 m, and height of 2.6 m, it offers generous space for a wide range of uses. The 5 cm thick insulation ensures effective thermal management, keeping the interior comfortably tempered. Anthracite-colored panels (RAL7016) and the base frame give the container a contemporary and stylish appearance. The container is equipped with a double-glazed glass door and two floor-to-ceiling windows (1000 x 2000 mm), which allow for abundant natural light and create a bright working environment. The electrical fit-out includes a 32A CEE plug (red), three double power sockets, two LED lights, and one light switch. Weighing 1,000 kg, the Villex Big Cube Block Line Black 2.0 remains easily transportable while providing a high-quality, functional solution for modern office or workspaces. Item number: BCBLB2.0 Version: 6.0 m container Length: 6.0 m Width: 3.0 m Height: 2.6 m Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Rsdpfxsy Hkvpe Afnot Weight: 1,000 kg Doors: 1 x door (glass) Windows: 1 x floor-to-ceiling window (1000 x 2000 mm) & 2 x glass elements Electrical equipment: 32A CEE plug, red; 3 x double sockets, 2 x LED lights & 1 x light switch Includes air conditioning for heating & cooling We manufacture your container individually to your specifications! Optional features available at extra cost: • Custom dimensions, e.g. 9x3 m, 4x2.4 m, double container, triple unit, and more • Various window sizes • Different colors • Floor colors • Practical forklift pockets • Lamp • Roller shutters • Heating • WC, shower, toilet, washbasin • Kitchen • Plastered interior walls • And much more Delivery is usually made with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance via PayPal or bank transfer. Delivery time for in-stock standard containers nationwide is approx. 1–2 weeks after order receipt, depending on postal code region. We manufacture and deliver custom containers within 1–4 weeks. Collection and inspection at Villex Container GmbH, Dortmunder Str. 90, 59427 Unna can be arranged by appointment during business hours by prior telephone arrangement.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Ready for immediate delivery, turnkey and in stock Dimensions: Length: 6.0 m Width: 3.0 m Height: 2.6 m External area: 18.0 m² Insulation thickness: 5.0 cm Colours: Panel: RAL 7016 (anthracite) Rjdpjy Hkbxefx Afnet Base frame: RAL 7016 (anthracite) Block Line cladding 3.0: RAL 7016 Weight: 1,300 kg Door: 1x PVC glass door, double-glazed Windows: 2x floor-to-ceiling, vertical PVC windows (100 x 200 cm), double-glazed, tilt-and-turn function Electrical installation: According to VDE standard 3-phase, 32A CEE plug (red) 3x double power sockets Lighting: 2x lamps 1x light switch Air conditioning: Split unit for heating and cooling, included in the price ----- Optional additional equipment (at extra charge): Double-leaf doors: For wider access and improved transport options. Additional doors: Flexible access options. Additional windows: Enhanced ventilation and daylight. Additional double windows: Improved thermal and sound insulation. Additional floor-to-ceiling windows: Modern design and generous lighting. Roller shutters: Privacy and sun protection for light and visibility control. Glass façade: Bright ambience thanks to fully glazed front. Woodstyle façade: Wooden finish for a warm, aesthetic appearance. Separate rooms: Flexible use of space through additional room partitions. WC: Integrated sanitary unit for greater comfort. Shower: Addition to the sanitary unit, ideal for longer stays. Air conditioning: Additional heating and cooling functions. Insulation: Choice of 50 mm, 60 mm, 80 mm, 100 mm, or 120 mm. Forklift pockets: Easier handling with forklifts. ----- Delivery: Nationwide delivery possible with crane vehicles. To calculate the delivery price, please provide your postal code. Delivery time: 1–4 weeks, depending on distance and availability (standard container or custom-built).

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Containers shown in the images are in stock and immediately available. Inspection and collection possible. This offer includes Villex Big Cube Long Doppio Nero 1.0 containers, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, and construction site containers. Dimensions: 6 x 3.0 x 2.6 m Delivery: Nationwide delivery possible Standard features: Nlobsy Hgv Eetb Txx Rsa Condition: New & Assembled Exterior color: RAL 7016 (Black/Anthracite) Interior color: Walls -> White, Floor -> Wood look blue & grey (dark) Exterior walls: 50 mm thick Area: 18.00 m² Weight: 1300 kg 1x door (steel) 2x double windows (2000 x 1000 mm) Electrical: 32A CEE plug, red. 3x double power sockets, 2x LED lights & 1x light switch We manufacture your container completely according to your individual needs! Optional extras available for a surcharge: Custom dimension, e.g. 7 x 3 m, 4 x 2.4 m, double containers, triple units, and much more - Various window sizes - Various colors Rodpfx Asy Hidrsfnst - Floor color options - Practical forklift slots - Air conditioning - Lamps - Roller shutters - Heating - WC, shower, toilet, washbasin - Kitchen - Plastered interior walls - And much more Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance by PayPal or bank transfer. The delivery time for standard containers in stock is approximately 1-2 weeks nationwide after receipt of order, depending on the postal code area. We manufacture and deliver custom containers within 1-4 weeks.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Container in image in stock and available for immediate delivery. Viewing and collection possible. We are offering Villex Big Cube Vertikal Nero 1.0 containers in this listing, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, residential containers, or site containers. Dimensions: 6 x 3.0 x 2.60 m Delivery: Possible nationwide Standard Features: Condition: New & Assembled Exterior color: Anthracite + Black (as shown in the photos) External walls: 50 mm thick Area: 18 m² Weight: 1300 kg Redpsy Hidlefx Afnet 1x Door (glass) --> Aluminium, RAL9005, double-glazed 2x Floor-to-ceiling windows (1000 x 2000 mm) -> Aluminium, RAL9005, double-glazed Electrics: 3x Double sockets, circuit breaker + fuse Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance by PayPal or bank transfer. Delivery time for stocked standard containers nationwide is approx. 1-2 weeks after order placement, depending on the ZIP code area. Custom containers can be manufactured and delivered within 1-4 weeks.