Used Optimum Uf 100 for sale (25,205)

Condition: good (used), Year of construction: 2009, Internal Item No.: 26044 Universal Milling Machine Optimum UF 100 Year of manufacture: 2009 + 3-axis digital readout Spindle taper: SK40 Laedpfey H D N Nsx An Ujb Spindle speed: 45 - 1660 rpm Table: 1120 x 260 mm Travel: X 625 / Y 220 / Z 430 mm Dimensions (LxWxH): 200 x 200 x 170 cm Weight: approx. 1500 kg The machine is fully functional and can be inspected under power, by appointment, in a heated storage facility of over 500 m².

Condition: used, Technical Data: Travel X/Y/Z: 700 / 250 / 430 mm Upper slide travel: 630 mm Spindle speeds: 45 - 1660 rpm Spindle taper: SK 40 Control: conventional Table feed: 24 - 402 mm/min Milling head swivels: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (W x D x H), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital readout Laedpfx Aeyi E Uden Uob - Machine lamp - Coolant device - Machine feet

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 270 mm z-travel 430 mm 630 mm table-size 1120 x 270 mm spindle turning speed range 45 - 1660 U/min spindle taper SK 40 control konventionell spindle motor 2,2 kW total power requirement 2,4 KVA weight of the machine ca. 1,35 t dimensions 1,8 x 1,4 x 1,8 m Machine equipped with: Laedpfov Sdz Rox An Uob - Digital display - Machine light - Coolant system - Machine feet

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp Lasdow Rlvqjpfx An Ujb - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: excellent (used), Item: D-10720-PCI-UF-Pilot-Plant Ultrafiltration Pilot Plant APV Type PCI-UF 50-100 Lasdjihh Spjpfx An Ueb inclusive pumps, Exchangers, Inventers, tubes and other accessories. Laboratory plant

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 356 mm turning diameter over support: 220 mm turning length: 1000 mm centre height: 180 mm centre distance: 1000 mm spindle bore of work spindle: 38 mm range of revolution per miute: 45 -1800 U/min longitudinal feeds:: 0,043 -0,653 steps 42 tailstock quill taper MT: MK3 tailstock quill adjustment:: 95 mm Ljdpfx Aow D Dcqen Uoab total power requirement: 4 kW weight of the machine ca.: 0,85 t dimension machine xH: 1,92 x 0,8 x 1,49 inkl. Anzeigeneinheit m

Condition: ready for operation (used), Baumüller GNAFF 100 MV servo motor with fan SN:873036 ,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Laodpfxei D E Ehj An Ujb

Condition: used, Year of construction: 1994, ALKO Disposal Clean air filter module, FM RG 5/100 HD high-pressure Year of manufacture: 1994 Dust extractor designed for capturing, conveying, and separating wood dust and chips at individual dust sources. Industrial vacuum cleaner for vacuuming and separating deposited wood dust and chips. 400 Volt Lajdsw A Ad Repfx An Ueb Nominal hose connection D = 100 mm Continuous operation 3-phase alternating current Dimensions: 1090 x 580 x 1680 mm Weight: 55 kg Filter cleaning: Manual shaking system

Condition: ready for operation (used), SEV AT/MT1090-100 milling motor with collet holder SN:03102988, plastic insert of the connection socket is slightly damaged see photo, used, normal signs of use, 100% functional, scope of delivery as per photos Ledskxh Ayopfx An Ujab

Condition: excellent (used), 90 linear meters Stow pallet racking Used equipment in very good condition, see photos Height: 6 m Depth: 100 cm Beam length: 2.70 m Load capacity per level: 3000 kg Frames: blue Beams: orange Negotiable price: €9,390 net ex stock Offer includes: + 33 pre-assembled frames, 12t bay load, 100 cm depth, 6 m height + 192 beams, length 2.7 m, 3000 kg load capacity per level + 384 safety clips + 132 concrete anchors + Load capacity signage Item is in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available on request. We constantly have over 5,000 linear meters of pallet racking from various manufacturers in stock. (Specifications, details, and prices subject to change and errors excepted; goods subject to prior sale! See our terms and conditions, all prices excl. VAT ex stock.) Purchase / Sale We are constantly seeking or offering numerous items from various fields Laedpfxoiwkn Re An Ueb - broom-clean company clearances - business liquidations - Fast - flexible - efficient! We also clear out and/or dispose for insolvency administrators. Write to us with a few keywords, and we will contact you promptly. To visit our website, please click on our logo!

Condition: good (used), Approx. 30 linear meters of shelving system Schaefer R3000 Manufacturer: Schaefer R3000 Like new condition, see photos. Over 300 meters available Uprights, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load capacity per shelf, bay width approx. 100 cm Negotiable price: €2,690.00 net ex stock The offer includes: - 31 uprights or frames, 2.5 m, galvanized - 90 shelves, 100 kg load capacity per shelf, galvanized - 10 cross bracings for stability Ledpfx Anecfhx Ts Ujab - 3 levels per bay (additional levels available for a surcharge) - Other configurations possible. Heights of 2.3 m, 2.5 m, or 3 m available. Goods are in stock. Constantly over 3,000 linear meters of pallet racking from various manufacturers in stock. Transport and assembly available on request. Further information upon request. (Changes and errors in technical data, details, and prices as well as prior sale reserved! See our T&Cs. All prices exclude VAT, ex stock.) Buying / Selling We are constantly looking for and offering numerous items from various sectors. To visit our page, please click on our logo! - Broom-clean business clearances - Company liquidations - Fast - flexible - efficient! We also clear and/or dispose for insolvency administrators. Send us a few keywords and we will get back to you immediately.

Condition: excellent (used), SAPI Büffel 100 blasting cabinet with YASKAWA robot Year of production: 2020 Serial number: 20648 Laodpfxsvyh Dlj An Ueb with industrial robot YASKAWA YR-1-06VX-A00, serial number: K18777-473-1 Control: YASKAWA Eras-1000-06VX8-E10 The cell was used for satin finishing of plastic elements.

Condition: excellent (used), Year of construction: 2008, Stock number: 2971 Manufacturer: Optimum Year of manufacture: 2008 Machine number: 03111 Type / Model: OPTI 100 Travel x-y-z: 625 - 220 - 430 mm Table: 1,120 x 265 mm Speed range: 40 to 2,000 rpm Spindle mount: SK 40 Feed rates: Rapid traverse: Power supply: 2.2 kW Accessories/equipment: Digital display Laedpfjv Rvtcox An Ujb Condition: Good Weight: 1.5 t Dimensions: 2,000 x 2,000 x 1,700 mm

Condition: good (used), The scope of delivery includes: Lasdpfsld S Ufex An Usb 01x depth bar, used Material color: sendzimir galvanized total length: approx. 1.110 mm suitable f. depth of upright: approx. 1.100 mm clear span: approx. 1.000 mm profile dim.: C 70 x 50 x 15 mm crossbeam support: approx. 50 mm weight/pc.: approx. 3,02 kg

Condition: good (used), The scope of delivery includes: 198x depth bars, used Material color: sendzimir galvanized total length: approx. 1.110 mm suitable f. depth of upright: approx. 1.100 mm clear span: approx. 1.000 mm Lodpfx Anslhp Tcj Uoab profile dim.: C 70 x 50 x 15 mm crossbeam support: approx. 50 mm weight/pc.: approx. 3,02 kg Note: The unit price is only valid for a purchase quantity of at least 198 pcs (01x pallet).

Year of construction: 2024, condition: used, General information Field of application: Grounds care Serial number: LCELV1ZD0R6000133 Technical information Power: 52 kW (71 HP) Type of fuel: Petrol Weights Empty weight: 870 kg Carrying capacity: 1.550 kg GVW: 2.420 kg Lsdpfx Anotzixpe Uoab Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.77x1.62x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2019, x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens turning speed range - main spindle 10 - 10.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 70 / 48 Nm tool taper BT 40 table surface area 800 x 320 mm max. table load 300 kg Laedpfoww Nb Sex An Usb T-slots 3x 14 x 100 mm distance spindle /table 100 - 600 mm number of toolpositions 12 pos. tool taper BT 40 max. tool diameter 70 mm max. tool weight 6,0 kg change-time tool to tool 7,0 sec rapid traverse ( X / Y / Z ) 10 m/min feed speeds max. 10.000 mm/min repeating accuracy +/- 0,008 mm positioning accuracy +/- 0,01 mm total power requirement 15 kVA weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - SHOW-ROOM-MACHINE

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Laodpfxerivxcs An Ujb Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, table load: 300 kg, overall weight: 2,800 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis Optimum Optimill F 105 was manufactured in 2023. It features an X-axis travel of 550 mm, Y-axis travel of 305 mm, and Z-axis travel of 460 mm. The machine includes a robust table size of 800 x 320 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the Optimum Optimill F 105 vertical machining centre we have for sale. Contact us for further details. • Electrical connection: 3 x 400 V ~ 50 Hz, 15 kVA • Spindle: • Power S1: 7.5 kW • Power S6-30%: 11 kW • Torque S1: 48 Nm • Torque S6-30%: 70 Nm • Lubrication / coolant system: • Coolant pump power: 650 W Ljdpfxsy Tl Ndj An Usab • Tank capacity: 120 L • Compressed air: • Min. connection: 0.6 MPa (6 bar) • Air consumption: 0.1 – 0.15 m³/h at 0.6 MPa • Recommended air quality: ISO 8573.1 class 2 • Air consumers: tool changer forward/backward; tool clamp/unclamp; optional rotary table clamping • Compressed air service unit: • Drainage filters: 40 μm • Housing: Polycarbonate • Max. pressure: 1.5 MPa • Recommended oil: ISO VG32 • Lubricator quantity: 90 ml • Dewatering: manual • Air connection thread: 3/8” • Axis travels: • Z distance spindle–table: 100 – 600 mm • Accuracy: • Repeat accuracy: ±0.008 mm • Positioning accuracy: ±0.01 mm • Servo motor torques: • X: 8 Nm • Y: 8 Nm • Z: 11 Nm • Table: • Size: 800 x 320 mm • T-slots (size/number/pitch): 14 / 3 / 100 mm • Max. feedrate: 10,000 mm/min • Tool changer: • Positions: 12 • Max. tool diameter: 70 mm • Max. tool length: 300 mm • Tool change time: 7 s • Environmental conditions: • Operating temperature: 19 – 21 °C • Relative humidity: 5 – 80% non-condensing • Pressure: 700 – 1060 hPa • Storage temperature: 5 – 45 °C Technical Specification Taper Size ISO 40

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V Laodpfx Aoy Ty Dpsn Usb power capacity 1,5 kW dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) Lajdoxt Hn Sopfx An Uob The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: good (used), liter capacity 1000 l range L-W-H 1460 x 1460 x 620 mm weight 180 kg External dimensions approx.: LxWxH 1460 x 1460 x 620 mm (height incl. 100 mm clearance height) Collection volume: approx. 1000 liters Net weight (painted) approx.: 180 kg Construction made of 3 mm sheet steel With galvanized grating (load capacity 1000 kg/m²) Lasdpfey Ty Arjx An Ujb With support legs (100 mm clearance height) Transportable with pallet truck and forklift Suitable for flammable liquids in GHS categories 1-3 and for water-polluting liquids in GHS categories 1-4

Condition: new, Phytron ZMX + 32 V2 . 10011572 stepper motor driver SN 00271716, unused, 100% functional, scope of delivery as shown in the photos. Laodpsy R Iwfefx An Usb

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Ljdpoy Tvrpefx An Usab Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: used, Year of construction: 2025, cutting diameter max. 225 mm saw band length 2.480 mm width of saw-band 27 mm dimensions of saw-band 2.480 x 27 x 0,9 mm cutting angle 0 - 60 ° Ljdpfx Asykb Ensn Ujab band speed 20 - 90 m/min Cuttingrange 90° max. 225 mm capacity 90 degrees: square 190 mm capacity 90 degrees: flat 150 x 245 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 120 x 90 mm capacity 45 degrees: round 145 mm capacity 45 degrees: square 150 mm capacity 45 degrees: flat 190 x 150 mm total power requirement 1,5 kW weight of the machine ca. 185 kg dimensions of the machine ca. 1,5 x 1,2 x 1,6 m Metal Bandsaw OPTIMUM - OPTIsaw S 275 PV