Used Omc Veneer Press for sale (12,769)

Condition: ready for operation (used), functionality: fully functional, stroke length: 450 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, TECHNICAL DETAILS Press drive: Hydraulic Max. workpiece length: 3,000 mm Max. workpiece width: 1,300 mm Max. workpiece height: 450 mm Crsdjzxcmuepfx Ac Teg Total stroke: 450 mm Number of cylinders: 6 Cylinder diameter: 70 mm Heating type: Oil-heated Max. temperature: 120 °C Separate heating for top/bottom: Yes MACHINE DETAILS Number of work stations: 1 Number of levels: 1 Plate material: Steel Main motor power: 2.2 kW Connected power: 10.0 kW Voltage: 400 V Fuse rating: 32 A Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,650 x 2,400 mm Weight: 3,500 kg Transport packages: 1 EQUIPMENT Heating boiler Note: The plates require repair.

Condition: excellent (used), Year of construction: 2018, Veneer press, OMC Type PL 105 30/13 Year of manufacture: 2018 Dimensions: 2500 x 1300 Piston diameter: 6 x 85 Pressure: 3.2 kg/cm2 Cjdezx Sh Uepfx Ac Torg Weight: approx. 3300 kg

Condition: new, Year of construction: 2023, OMC PL 105 LC 30/13 W Hydraulic Veneer Press Crodpeiypzlsfx Ac Teg Working area: 3000x1300mm Opening width: 400mm 6 cylinders with a diameter of 85mm Total pressure: 105T Maximum heating temperature: 85 degrees Logic control system Machine control via a touch panel, displaying: Temperature, pressing force, shelf opening time, loading area calculator, glue process programming Power: 21KW CE certificate Manufactured in 2023 Machine available on order Machine is new

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Cedozifpgopfx Ac Terg

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 400 mm, table width: 1,200 mm, table length: 2,550 mm, clearance between the columns: 650 mm, total length: 1,400 mm, total width: 3,000 mm, total height: 1,930 mm, overall weight: 3,400 kg, This OTT veneer press from the Junior series, model 2512, with 6 pressure cylinders, is a classic hydraulic heated platen press for carpentry and woodworking. It has been completely overhauled by the Ott factory. 6 hydraulic pressure cylinders ensure extremely even pressure distribution over the entire surface, which is particularly important for demanding veneer work to prevent bonding errors. The use of 6 cylinders (instead of the often standard 4 cylinders for this length) minimizes the deflection of the press plates. This also allows for the pressing of smaller workpieces with high specific pressure without the plates warping. It is equipped with electric aluminum heating plates (gold anodized). The machine is connected and can be tested. Sale B2B without warranty/guarantee. Credpfx Aszv U Hzoc Tog

Condition: ready for operation (used), Year of construction: 2006, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 06060408, Description Grass Flexi Press (2006) including accessories Due to the purchase of a CNC machine, this professional Grass Flexi Press hinge and fitting drilling machine is no longer needed. The machine has always been well-maintained, has undergone annual inspections, and is in excellent/good condition. Ready for immediate use in the workshop! Cjdezrvauopfx Ac Tsrg Specifications & Details: Make/Model: Grass Flexi Press Year of manufacture: 2006 Condition: Well-maintained and annually inspected Includes: Various accessories / drill bits Reason for sale: No longer needed due to switching to CNC Interested or have questions? Please feel free to contact us for more information or to arrange a viewing of the machine.

Condition: used, Used machine Codpfxjzyy Ape Ac Terg Equipment and technical data:

Condition: refurbished (used), functionality: fully functional, Refurbished, four-piston hydraulic platen press of Italian manufacture. Branded veneer press for easy veneering of wood. Crsdpfx Asyi U Rnjc Tog Dimensions of veneer sheets: 2500 x 1300 mm Pressure at full area: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic pistons: 4 MYLAR Teflon film on the platens Preparation for heating the platens with water Option to install a hot water boiler Price: 6,630 EUR excluding VAT The condition after refurbishment and the machine's readiness for delivery must be verified in advance! In stock in Telnice near Brno, Czech Republic. Testing, demonstration of the machine, and operator training are standard services.

Condition: ready for operation (used), Year of construction: 1988, Langzauner SF 120 Veneer Press Csdpfjztn Aqex Ac Tjrg 120 tons pressing force 8 cylinders 80 mm diameter Opening width 400 mm Connection value per plate 11.5 kW Weight 6100 kg Space requirement 3730 x 1550 x 1970 mm Temperature 130° C Year of manufacture 1988 Heating plates Goldeloxal. Note: the plates are not in good condition. Dent on the lower plate in the rear right section. Price 11,000.- Price with new Elkom Goldeloxal plates 17,000.-

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, working width 2700 mm working height 100 mm hydraulic cutting Crsdpszxp U Ejfx Ac Tsg gauge adjustment to size cast body power supply 400V 3000 kg Year of manufacture 2004

Condition: ready for operation (used), plate length 3500mm plate width 1300mm water heating 8 hydraulic pistons pistons diameter 85mm plates span 640mm outomatic opening year 1992 Codpfxozxy N Ts Ac Terg

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cjdpsyxp Twjfx Ac Tsrg Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 3/1406, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, Veneer press, Joh. Langzauner & Sons ----- Technical data ----- Cjdpfsy Twrkex Ac Tsrg Pressing area: 2,550 mm x 1,300 mm, Power per heating plate: 7,200 W, Number of cylinders: 4 pcs.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, plate length 3500mm plate width 1300mm solid steel plates oil heating with included heater 8 hydraulic pistons Cedjzxp Swopfx Ac Tsrg pistons diameter 85mm total pressure 160 tons safety line switch year 2002

Condition: excellent (used), Year of construction: 1989, Veneer press Manufacturer: Bürkle Type: U60 Year of manufacture: 1989 Plate dimensions: 2,200 x 1,250 mm Opening width: 400 mm Pressing pressure: 60 tons Cedpfx Aceztnhmo Terg Specific pressing pressure: 2.2 kg/cm² Heating: Electric Motor power: 0.75 kW Emergency stop device: Emergency stop cable Weight: 3,000 kg Dimensions: 2,750 x 1,380 x 1,785 mm

Condition: excellent (used), functionality: fully functional, Device description: Pump motor power – 1.35 kW 10 hydraulically actuated clamping cylinders – spring return 17 hydraulically actuated upper cylinders for clamping the beam Maximum working dimensions: 7 x 1.5 m Codpfx Acszxxraj Torg

Condition: refurbished (used), functionality: fully functional, Refurbished, six-piston hydraulic flatbed press of Italian manufacture. Branded veneer press for easy wood veneering, with warranty and service. Crsdovvbbcspfx Ac Tsg Veneer sheet dimensions: 3000 x 1300 mm Pressure at full surface: 2.5 kg/cm2 Total maximum pressure: 90 tons Number of hydraulic pistons: 6 MYLAR Teflon film on the plates Prepared for water-based plate heating Option to install a hot water boiler Price includes complete machine refurbishment Price: 12,000 EUR (excluding VAT) The machine is refurbished, adjusted, and tested. The condition of the refurbishment and the machine's readiness for delivery must be verified in advance! In stock: Telnice near Brno, Czech Republic Testing, demonstration of the machine, and operator training are standard.

Condition: ready for operation (used), functionality: fully functional, plate length 3500mm Crodpfx Aey N Rcnec Teg plate width 1300mm two inserts water heating - needs to be connected to heater 8 hydraulic pistons pistons diameter 85mm span between plates max 460mm

Condition: excellent (used), functionality: fully functional, shelf length 3000 mm; shelf width 1300 mm; water heating; 6 hydraulic cylinders; piston diameter 70 mm; new Teflon films on the shelves Cedpfx Acezxp Skj Torg

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm clearance between shelves: 30 cm oil heating Crjdpfjzx U Haox Ac Tjg 6 hydraulic cylinders safety shear pin

Condition: used, Used Italpresse UT/6 hot press Codpozkt Tiofx Ac Torg for surface finishing by applying veneers to chipboard, plywood, MDF, solid wood, or plastic laminates, also suitable for aluminum and other metals. The press platens are solid plates made of perforated steel. Platen dimensions: 3000 x 1300 mm. Maximum opening: 400 mm. Platen heating is achieved with heat transfer oil and an electric boiler, complete with a circulation pump. Boiler: 27 kW - 380 V. Selector switch for using 50% of the boiler's power (13.5 kW in 1st position) or 27 kW in 2nd position. Pressing time can be set with automatic opening. Maximum pressure: 300 bar. Option to exclude 2 lateral cylinders from the control panel. Protective Mylar film on the platens. Machine dimensions: 3700 x 1700 x H. 2100 mm. Weight: 6600 kg. Machine complies with CE standards.

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Credpfxsymmgio Ac Teg Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: good (used), Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press with diathermic oil for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Heating with diathermic oil by electric boiler Mylar-coated platens Crsdpfx Aozil Ipoc Tsg Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500

Condition: excellent (used), functionality: fully functional, total length: 4,100 mm, total width: 1,600 mm, total height: 2,000 mm, Shelf length: 3500 mm Shelf width: 1300 mm Clearance: 390 mm Number of pistons: 6 Piston diameter: 80 mm Cedpfx Aozxpv Aec Terg Water heating Emergency stop with pull switch New Teflon foils on the plates Machine dimensions: Length: 410 cm Width: 160 cm Height: 200 cm

Condition: excellent (used), functionality: fully functional, Shelf length 3500 mm Shelf width 1300 mm New aluminium shelves Crsdpfxszyaipe Ac Teg 6 hydraulic cylinders Piston diameter 70 mm Water heating Ground clearance 390 mm Safety rupture link Year 1999 Weight 4400 kg