Used Mwm Gmbh Cogeneration Plant for sale (70,445)

Condition: used, Year of construction: 2011, operating hours: 19,630 h, functionality: fully functional, machine/vehicle number: 1263718, type of input current: three-phase, power: 400 kW (543.85 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, total height: 1,850 mm, total length: 3,090 mm, total width: 1,480 mm, fuel: biodiesel, overall weight: 4,500 kg, type of cooling: water, nominal power: 400 kW (543.85 HP), nominal power (apparent): 400 kVA, input frequency: 50 Hz, empty load weight: 4,500 kg, Equipment: documentation/manual, Two MWM cogeneration plants manufactured in 2011 are for sale. They are ideally suited for decentralized combined heat and power generation. Key technical specifications of the MWM cogeneration plant, according to the documentation: Fuel used: biogas Generator: MarelliGenerators Engine: MWM GmbH Type: TCG 2016 V8 C Identification No.: 1263718; 1263719 Year of manufacture: 2011 Engine mechanical power: 415 kW Engine electrical power: 400 kW Thermal power: 398 kW Max. fuel consumption: 941 kW Kdjdpfezudbfjx Akpeu Speed: 1500 rpm Ignition system: Altronic ZS3 Ignition system No.: 3644 Ignition angle: 23.00 Ignition plug type: 12342688 Power regulation: multi-stage GEN-1: 19,440 operating hours GEN-2: 19,630 operating hours The cogenerators are sold with electrical and control cabinets, flue gas heat exchangers, emergency coolers, engine circuit pumps, heat exchangers and three-way valves, ventilation air systems, and acoustic containers.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 72,318 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR – MWM TBG 620 V16 K (Complete Package) Available MWM TBG 620 V16 K natural gas generator set, offered as a complete package with auxiliaries. The unit has 72,318 running hours from new and was shut down in 2022 while operating at full load. Maintenance All maintenance has been carried out by official service, following the manufacturer’s scheduled maintenance plan. Technical data • Brand / Model: MWM – TBG 620 V16 K • Electrical output: 1,364 kW • RPM: 1,500 rpm • Frequency: 50 Hz • Year of manufacture (YOM): 2004 Kdsdpfeytq A Uox Akpju • Total running hours (since new): 72,318 h • Fuel: Natural Gas • Generator brand: Marelli Generators • Voltage: 400 V Scope of supply (included) • MWM genset • Control cabinet • Auxiliary control cabinets • Gas ramp • Cooling system • Protection switchgear • Silencer • 3-Way Valve • Documents Status / Availability Availability: Immediate For more information please contact us!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 116,131 h, functionality: fully functional, SIEMENS SGT-300 (TEMPEST) industrial Combined Heat and Power (CHP) / Poligeneration Plant, originally installed in 2008 and designed for continuous industrial operation. The plant is based on a Siemens SGT-300 single-shaft gas turbine with Dry Low Emission (DLE) combustion technology and a complete Waste Heat Recovery System (WHRS/HRSG) capable of simultaneously producing electrical power, process steam, thermal oil and chilled water. Gas Turbine • Manufacturer: Siemens • Model: SGT-300 (TEMPEST) • Year: 2008 • Type: Industrial Single Shaft Gas Turbine • Fuel: Natural Gas • Dry Low Emission (DLE) combustion • ISO Electrical Output: 7.9 MW • Site Output: approx. 7.6 MW • Generator Voltage: 6.3 kV • Frequency: 50 Hz • Generator Speed: 1,500 rpm • Electrical Efficiency: approx. 30.5% • Exhaust Gas Flow: 30.2 kg/s • Exhaust Gas Temperature: 545°C • Continuous duty (24/7 operation)Complete heat recovery package including: ✔ Thermal Oil Heater – DOWNTHERM A – 4.3 MW ✔ Thermal Oil Heater – SANTOTHERM 66 – 3.88 MW ✔ High Pressure Steam Generator (25–26 bar) ✔ Low Pressure Steam Generator (4.5 bar) ✔ Hot Water Generator ✔ Single Effect Absorption Chiller Cooling capacity: 1.7 MW Production of: • Electricity • High pressure steam • Low pressure steam Kodpfszmga Ijx Akpjdu • Thermal oil • Hot water • Chilled waterOperating hours: 116,131 h, according to control panel Starts: 677, according to control panel Location: Spain Documentation: Available upon request Inspection: By appointment

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Kdodpjzzd Dmefx Akpeu Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: used, Year of construction: 2017, operating hours: 30,000 h, 1 Bending and welding system, BMW tension strut, manufacturer: STEPP Fabrikationsautomations GmbH & Co. KG, year of manufacture: 2017, power connection: 400V, 50Hz, 200A, nominal pressure: 6 bar, dimensions (L x W x H): 10m x 6m x 2.6m, weight: approx. 16t, pneumatic components are primarily used for clamping and alignment, hydraulic drive is mainly used for direct processing, such as hole punching, 3 robots, manufacturer: Yaskawa, type: 1x YR-MH00024-A00, 2x YR-MA1440/MH12-A00, for transfer and welding operations, servo drives are used for transfer, control system: Siemens 1516-3, machine hours: 30,000, average utilization: 85%, last documented maintenance: 02/16/2024, system generally operational, rework has been carried out. Kdsdpfj Aaw U Tsx Akpou

Condition: used, Year of construction: 2019, operating hours: 25,600 h, 1 Skoda production line, manufacturer: STEPP GmbH & Co. KG, year of construction: 2019, mains connection: 400V, 50 Hz, nominal pressure: 6 bar, dimensions (L x W x H): 12m x 8m x 2.6m, weight: 16 t, enclosed robot cells, the system is used for the production of hood hinges for Skoda vehicles, raw material is transferred and riveted between different stations, 4 robots, manufacturer: Yaskawa, type: 2x YR-HP20R-B2C, 1x YR-HP20-B00, 1x YR-1-06VX7-A00, machine hours: 25,600, average utilization: 85%, last documented maintenance: 02/12/2025, the system is generally operational, rework has been carried out. Kjdpe Aaxgdefx Akpedu

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,022 h, machine/vehicle number: 2621150, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: VARIOBEND / ASCO, controller model: VARIOBEND Touch Control, working width: 6,400 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,300 mm, overall weight: 8,800 kg, total length: 7,200 mm, total width: 2,150 mm, total height: 1,600 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, year of last overhaul: 2025, Equipment: CE marking, angle stop, centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, We are offering for sale a VARIOBEND CNC sheet metal folding machine, manufactured by ASCO GmbH, Germany. The machine is currently owned by DIMING d.o.o., a company based in Slovenia, specializing in construction and sheet metal works. The machine is designed for precise and efficient sheet metal bending and is particularly suitable for roofing, façade construction and architectural sheet metal fabrication. Its robust construction and CNC-controlled operation ensure accurate, consistent and repeatable bending results, making it suitable for professional sheet metal processing. We are upgrading our machinery and investing in a newer-generation folding machine. The machine is available for inspection in Slovenia by prior arrangement. Kedpfxoz Sz Txs Akpjdu

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Kedpfx Aksz D Ihfjpedu

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2080403, CNC Horizontal 5-Axis Double-Spindle Machining Center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of Manufacture: 2017 Machine Number: 2080403 Control System: CNC Siemens 840 Number of Axes: 5 Number of Spindles: 2 Double Table System Travel Ranges X/Y/Z: 600 / 600 / 510 mm Spindle Speed: up to 17,500 rpm Kdjdpfj Aarqpsx Akpsu Rapid Traverse: up to 45 m/min Tool Interface: HSK-A63 Machine Weight: approx. 16,000 kg Equipment: Standard accessories Powerful CNC horizontal machining center with a double spindle and double table system for precise and efficient series production. Location: Maribor, Slovenia Availability: By arrangement Inspection possible by appointment.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet. Kdjdjzmzbmopfx Akpou

Year of construction: 2022, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 21-120004/A, These are two silos with ATEX certification and a volume of 15 m³, designed for handling difficult, lightweight bulk materials with a density of up to 300 kg/m³, or for lower filling levels with higher densities. The silos are fully equipped with a filter at the silo head and a discharge screw at the outlet, also equipped with a filter and a rotary valve. The special feature lies within – a screw conveyor running along the bottom, rotating slowly to keep the material moving. Filter cartridges are included in the scope of supply. Interfaces: Filling – Flange at the silo Discharge – Conveyor screw with filter and rotary valve Kedpjz Nkt Nofx Akpedu These are two silos – the package price is 15% lower than the stated individual price of a single silo.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel Ksdpfx Asz Iww Rskpjdu • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: ready for operation (used), Year of construction: 2000, operating hours: 70,606 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, input frequency: 50 Hz, Equipment: rotational speed infinitely variable, GAS GENERATOR PLANT – CATERPILLAR 3516 (Complete Package) Complete natural gas power generation package, supplied with main auxiliaries and systems. The unit was operating at full load without issues before shutdown. All maintenance performed by authorized service providers, strictly following the manufacturer’s recommended maintenance schedule. Preventive maintenance carried out immediately prior to shutdown (2022): Kdedpfxsytq Eio Akpou - Inspection/checking of key engine parameters - Bearing lubrication - Oil replacement - Filter changes (oil and air) - Spark plug replacement - Borescope inspection: documentation available Technical specifications: - Electrical output: 1,030 kW - Total operating hours (since new): 70,606 h - Year of manufacture: 1999 - Fuel: Natural gas Scope of supply (included): - Complete genset - Gas train - Control panel - Circuit breaker (alternator + transformer) - Heat exchanger - Silencer - Cooling system (HT aerofan and LT cooling tower) - Lubrication system Availability: Immediately The equipment has already been dismantled and is stored in our warehouse, ready for loading or inspection.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Kodpoz I Tktjfx Akpjdu Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12-month warranty, immediately available, in stock. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers; not available individually due to shared control system! -Drawers extend on telescopic rails -Drawers are locked individually with quick-release fasteners -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow is horizontal -Air circulation via radial fan -Temperature controller Eurotherm 3508 -Thyristor switch -Safety limiter JUMO Kodpfx Ako Aa Aivspodu -Heating capacity per oven: 17.4 kW -Documentation, CE declaration of conformity Inspection in our warehouse possible upon request! Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, stress-relieving oven.

Condition: excellent (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 4110, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,400 mm, overall weight: 11,000 kg, spindle speed (max.): 4,000 rpm, coolant supply: 7 bar, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CMA GRD 4514 The CMA CNC machining center GRD 4514 offers a highly efficient solution for flexible drilling, threading, and milling operations in an extended format. Equipped with a 13.1 kW motor and a spindle speed of 50 to 4000 rpm, the system enables effortless drilling of holes up to 36 mm, as well as the cutting of threads up to M24 (based on ST 40 and HSS-Co cutting insert drills). - Extended work area and travel ranges: Table dimensions: 4500 x 1330 mm (effective machining length X-axis: 4500 mm) - Travel ranges X/Y/Z: 4500 x 1450 x 500 mm - Chip conveyor: Directly integrated into the machine table for optimal chip removal Productivity through pendulum operation: Thanks to the generous X-axis travel of 4500 mm, this variant is ideally suited for efficient pendulum operation. You can safely load and unload workpieces on one half of the table while the machine produces uninterruptedly on the other half. Protection is provided on the front side by a dynamically moving laser area sensor on the machine head. Kedpfxjzuw Eqj Akpodu Software & Intelligent Control: Graphical programming: Including automatic determination of cutting data and nesting of multiple products, even different ones, on the large table. Collision warning: Integrated protection for maximum process safety. Height correction: automatic measurement and correction of the workpiece height for 100% precise countersinking and reaming. CAD/CAM extension: Optionally, a conversion of 2D/3D drawings directly into DIN/ISO machine programs is possible. Standard equipment of the complete system: - Automatic tool changer for 14 tools - Automatic tool length measurement - Fixed light curtain in the Y-direction (500 mm above the table) and rear protective fence - Powerful coolant system with emulsion - Ethernet connection for fast remote service

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Kodpfxoya H Uyj Akpodu

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080100, CNC Horizontal 5-Axis Twin-Spindle Machining Center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of Manufacture: 2011 Machine Number: 2080100 Control System: CNC Siemens 840SL Number of Axes: 5 Number of Spindles: 2 Dual Table System Travel in X/Y/Z: 600 / 600 / 510 mm Spindle Speed: up to 17,500 rpm Rapid Traverse: up to 45 m/min Tool Interface: HSK-A63 Machine Weight: approx. 16,000 kg Equipment: Standard accessories High-performance CNC horizontal machining center with twin spindle and dual table system for precise and cost-effective series production. Location: Maribor, Slovenia Availability: Immediately available Inspection possible by arrangement. Kjdpfx Ako Aarpxepedu

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ Kdodpfx Aksz Hngmopju • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: new, functionality: fully functional, Year of construction: 2026, New machine Vertical broaching machine VADARI GmbH TYPE SRM 2027-60 KN - 90 KN or 120 KN also possible! BROACHING MACHINES MADE IN GERMANY. Special offer: Currently with a free tool set (broaching pins and matching holders - limited quantity!) Note: The machine can also be offered and manufactured in a version with a pulling force of 90 KN (9 tons) or 120 KN (12 tons). ==> Information for manufacturing companies or dealers with their own production: If desired, the drawings, rights, spare parts, customer and prospect data, planning and manufacturing documents (including plans for a version with a 9-ton pulling force) for the broaching machine can be purchased from us. Please contact us if interested. ==> The new machines are manufactured by us on a project-specific basis after the order is placed. Short-term manufacturing and delivery are possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for short-term delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special pins for internal gears, etc.) and accessories available. Please request separately. All broaching tools and holders from other manufacturers can be used with our broaching machine! Complete manufacturing and assembly at our plant in Germany. In addition, we also offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, and all other required components - including electrical parts). Vertical broaching machine Type SRM 2027 - NEW MACHINE: 60 KN version: The range of applications is mainly in the production of keyway grooves from 3-28 mm (but also larger) and profiles with similar dimensions. The compact and space-saving machine can therefore be used successfully in small, medium and large companies. The low price justifies the purchase even for small series and individual production. The drive is via a reversible gearbox brake motor. The maintenance-free double spindle drive ensures smooth running and a central pulling point, as well as constant cutting performance. The free tool table allows even large workpieces to be placed without hindrance. In most cases, the workpieces to be broached do not need to be firmly clamped. Stroke adjustment is carried out by adjustable limit switches with stroke limitation. In the case of short hubs/workpieces, several workpieces can be placed on top of each other. Broaching pins, mandrels and spare parts on request. Kdjdpeuqbnhsfx Akpju Technical data: Pulling force: 60 KN at 3 m/min, 40 KN at 6 m/min. Broaching speed: 3 m/min + 6 m/min. (Optional: stepless speed adjustment (from 0 m/min to 6 m/min possible with extended electronics) Return speed: 6 m/min. Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: any Work table: 450 x 350 mm Table through-hole: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Overall height of the machine: 1510 mm Drive power: 3.7 / 4.4 KW Electrical equipment: 400 / 230 volts 50 Hz Control voltage: 230 volts Operating voltage: 400 volts 50 Hz Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 Safety door: standard equipment Coolant system: standard equipment The machine complies with the current Machinery Directive and has the CE marking.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2080082, Used CNC horizontal machining center, 5-axis, with dual spindle and dual table Technical data – SW BAW06-22 Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2010 Machine number: 2080082 Control system: CNC Design: Horizontal Number of axes: 5 Number of spindles: 2 Number of work tables: 2 Travel in X-axis: 600 mm Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Maximum spindle speed: 17,500 rpm Rapid traverse rate: up to 45 m/min Tool holder: HSK-A63 Machine weight: approx. 16,000 kg Accessories: Standard accessories Availability: Available immediately Machine description Used CNC horizontal machining center SW BAW06-22 with 5-axis machining, two work spindles, and a dual table system. Ksdpfx Ake Aarpfspodu The dual-spindle design allows two workpieces to be machined in parallel. The high spindle speed of up to 17,500 rpm enables productive and precise machining. Additional manufacturer data According to the technical data sheet from SW, the following values are specified for the BA W06-22 series: Spindle distance: 600 mm Spindle power: 2 × 35 kW Spindle torque: 2 × 80 Nm Tool magazine: 2 × 42 positions, optional larger Maximum tool length: 425 mm Maximum tool weight: 10 kg Control system according to manufacturer: Siemens SINUMERIK 840D sl Operating voltage: 400 V / 50 Hz

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Area per shelf: 23 x 30 cm = ± 0.06 m² Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Ksdpsygndpefx Akpjdu Autres : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: good (used), Year of construction: 2013, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, Exo-Zell-EROWA automation with EDM314MF30+HSC600/5 Automation kit EROWA UPC table clamping system with adapter plate ITS/Powerchuck 10 pallet changing stations 150 electrode changing stations JMS-Certa identification Measuring machine DuraMAX EDM314MF30, year of manufacture 2013 Technical data: Travel ranges XxYxZ 905x705x455mm Workpiece table: 1150x850mm Tank size 1200x900mm Filling height of the work tank 500mm Distance table/electrode holder 250/700mm Workpiece weight max. 3000kg Dimensions WxDxH 2090x3416x3100mm Machine weight 7500kg Operating hours 10,000h Control interface MF30 Backflushing filter with dirt container Integrated cooling unit Automatic tank refill Extinguishing system Co² Smoke extraction Fire protection flap Erosion generator exopuls+60A C-axis 100°/min with holding brake, direct measurement Kodjz Sp Haspfx Akpjdu Direct measuring system in all axes HSC600/5, 5-axis, year of manufacture 2008 Control iTNC530i Milling spindle HVC140, 42000rpm Technical data: Travel range XxYxZ 650x550x400mm Travel range BxC B105+/- C endless Table diameter 410mm Distance table/spindle nose 600mm Workpiece weight max. 200kg Rapid traverse 50m/min Rotational speed B/C 80/80°/min HSK40-E 60-position tool changer Oil mist extraction Minimum quantity lubrication Manual control panel with handwheel Adjustable air/cooling supply Kinematics optimization Calibration sphere for kinematics optimization Length compensation for all axes HIB cooling unit Measuring probe Renisaw OMP400 Calibration ring Performance acceptance test Transport Commissioning on site Training

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h Kdodpoznz Ezofx Akpeu • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 133,000 h, functionality: fully functional, rotational speed (min.): 750 rpm, rotational speed (max.): 750 rpm, input frequency: 50 Hz, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, Available complete natural gas power plant with Wartsila 18V34SG engine. The engine was running at full load with all maintenance performed. The fans for the cooling system are not included, only the heat exchangers. Brand: Wartsila Model: 18V34SG Generator brand: ABB Power: 5980kW Kdjdpfxsytq Tys Akpeu Fuel: Natural Gas Year of manufacture: 12/1999 RPM: 750 Operating hours: 133,000 hours We can offer 2 more units.