Used Multisaw Cross Feeder for sale (6,929)

Condition: used, Multisaw cross feeder Lredpfx Acenwnpqj Aet

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Lrodpsw D Ev Esfx Ac Ajt Ready to ship worldwide More pictures and videos available upon request

Condition: excellent (used), Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm min. material length 800 mm max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm Ljdpfxoma Dkfe Ac Aort receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / width / height) 700 / 245 / 180 cm weight 3000 kg

Condition: used, Cascade-type cross conveyor: - total length 7250 mm Lsdpsxuip Ijfx Ac Aort - total width 2100 mm - chain pitch 300 mm - five chain sections - motor power 4 kW - six discharge chains

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Lrsdpfx Acjzp H R Ej Ast Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, machine/vehicle number: SN: R050A-24E0011, I-PULSE F2 Feeder F2-44mm___1 piece Lrodpfxeww Etwj Ac Aot F2-32mm___2 pieces F2-24mm___4 pieces F2-16mm___5 pieces F2-12mm___6 pieces F2-84mm___39 pieces F2-82M_mm___6 pieces Feeder Stick____1 piece

Condition: ready for operation (used), Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages. Ledpfxotz Dkao Ac Aort

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Ledpfx Ajwym Nfoc Asrt Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: new, functionality: fully functional, Year of construction: 2026, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Lrsdpfx Aoxqcn Aoc Aet Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Gearbox: Heavy-duty type Walking Platforms: Available Steel Feet: Available Why Choose CONSTMACH Wobbler Feeders? CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & Tornos SBF326-3.2M Bar Feeder Lrsdpfx Aoz Dg Evjc Ajt Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: excellent (used), Year of construction: 2003, Feeder Caps 8006 automatic disc feeder, sorting machine Fully automated, variable dosing speed, manual height adjustment. Stainless. Lrjdpeg Rkwmjfx Ac Aet Year of production: 2003 Power: 0.55kW max. dosing capacity: approx. 1000 pcs / min Diameter: 1400mm Siemens control. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Year of construction: 2016, operating hours: 25,187 h, functionality: fully functional, The Mazak 3D Fabri Gear 400 II is a 6-axis 3D laser cutting machine designed for cutting tubes and profiles, specifically engineered for processing large-diameter materials and structural shapes. The 2016 model is typically equipped with a 4.0 kW Panasonic CO2 laser resonator and specialized 3D heads for complex cross-sections. Key technical parameters (2016 model): Laser type: 4.0 kW (4000 W) CO2 resonator Maximum material length: 12,000 mm (12 m) Maximum tube diameter: approx. 406 mm (16") Maximum square profile: 254 mm x 254 mm (10" x 10") Axes and movement: 6-axis control (X, Y, Z, A, B, C) Control unit: Mazak FX Maximum workpiece weight: approx. 480 kg Functions and capabilities: Material types: Carbon steel, stainless steel, and structural profiles (I-beams, channels, angles). 3D head: Rotatable 3D laser head with a touch sensor (probe) and an auto-focus system. Automation: Weld seam detection and automatic material measurement. Optional equipment: Threading unit (enables cutting and threading in a single cycle) V-TYPE FEEDER Ljdpfx Aozg U Tpsc Aert Machine operating hours: 25,187 hours. Link to machine video:

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points Ljdpszm Hr Rjfx Ac Aert 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: ready for operation (used), Year of construction: 2019, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: ML0336-000164, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 51 mm, controller model: Siemens S828D, TECHNICAL DETAILS Main spindle speed: max. 6,000 rpm Travel in X-axis: 205 mm Travel in Z-axis: 560 mm Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 36 m/min Swinging diameter over bed / turret: 600 / 400 mm Torque: 127 Nm Hydraulic 3-jaw chuck: 170 mm Workpiece size: max. Ø 300 × 510 mm Bar diameter: max. 51 mm Chuck outer diameter: 152 mm Tool stations: 12 Tool cross-section: 20 × 20 mm Tools: max. 24 Turret indexing time: 0.11 s MACHINE DETAILS Control model: Siemens S828D Main motor power: 12.6 kW Power of driven tools: 6.2 kW High-pressure coolant pressure: 0.7 MPa Dimensions & Weight Machine dimensions (L × W × H): 2,540 × 1,595 × 1,693 mm Machine weight: 3,480 kg Operating hours: 43,500 h EQUIPMENT High-pressure coolant system, 0.7 MPa Transformer Chip conveyor Tool measurement / tool probe Collet chuck with 3 collets LNS bar feeder for bars up to max. 1.5 m length Workpiece catcher and ejection system Tool load monitoring CE conformity Highly rigid cast iron machine bed Ledpfxszzx Igj Ac Aert 12-position turret with accommodation for max. 24 tools Automatic bar feeder Oil separator for coolant Roller-guided linear guides Documentation/manual Spindle speed continuously adjustable

Condition: used, We offer for sale a Horizon AFC-744S Cross Folder in used working condition. The machine is currently installed in a printing facility and is available for inspection. It is suitable for professional post-press production and high-quality folding work. Ledpfozfivvjx Ac Asrt Machine details: Manufacturer: Horizon International, Inc. Model: AFC-744S Cross Folder Serial No.: 354002 Configuration: 4 folding cassettes + knife + cassette + knife Maximum sheet size: 738 × 1100 mm Minimum sheet size: 210 × 297 mm Power supply: 400V, 3-phase, 50/60Hz Made in Japan Condition: The machine is in used working condition. It has been installed in a production environment and shows normal signs of use. Available for inspection before purchase. Included: Horizon AFC-744S folding machine 4 folding cassettes Cross-folding knife unit Additional cassette and knife section Feeder and delivery system as shown in the photos Control panel / operating screen Additional information: The machine is sold as shown in the photos. Dismantling, loading, transport and installation are not included in the price unless agreed separately. For more information, additional photos, video of the machine in operation, or to arrange an inspection, please contact us.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 4,104 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 235 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 580 mm, spindle motor power: 18,500 W, total height: 2,085 mm, total width: 1,814 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, product length (max.): 2,790 mm, number of slots in tool magazine: 12, number of axes: 6, This 6-axis SMEC SL2000SY was manufactured in 2022. It features a maximum turning diameter of 395 mm and a maximum machining length of 450 mm. The machine is equipped with a Siemens SINUMERIK 828D control system and a tool turret capacity of 12 stations. If you are looking to get high-quality turning capabilities, consider the SMEC SL2000SY horizontal turning machine we have for sale. Contact us for further details. - Control: Siemens SINUMERIK 828D with OPERATE + PPU290 (Touchscreen)- Swing over bed: 650 mm- Swing over cross slide: 540 mm- Max. turning diameter: 395 mm- Max. machining length: 450 mm- Y-axis travel: 105 mm (±52.5 mm)- Main Spindle Chuck Diameter: 210 mm (8")- Main Spindle Nose Norm: A2-6- Main Spindle Bearing Inner Diameter: 110 mm- Main Spindle Max. Bar Capacity: 67 mm- Main Spindle Bore Diameter: 76 mm- Main Spindle Drive Power: 18.5 / 11 kW- Main Spindle Max. Torque: 209.5 Nm- Sub-Spindle Chuck Diameter: 152 mm (6")- Sub-Spindle Nose Norm: A2-5- Sub-Spindle Bearing Inner Diameter: 90 mm- Sub-Spindle Max. Bar Capacity: 36 mm- Sub-Spindle Bore Diameter: 45 mm- Sub-Spindle Drive Power: 9 / 5.5 kW- Sub-Spindle Max. Torque: 51.9 Nm- Sub-Spindle Max. Speed: 6,000 rpm- Tool Turret Capacity: 12 stations (24-position indexing)- Tool Holder Type: BMT55- Driven Tool Drive Power: 5.5 / 3.7 kW- Driven Tool Max. Speed: 5,000 rpm- Driven Tool Max. Torque: 35 Nm- Stationary Tool Cross Section: 25 x 25 mm- Boring Bar Holder Cross Section: Ø40 mm- Station-to-Station Index Time: 0.2 sec- Rapid Feed X-axis: 18 m/min- Rapid Feed Z-axis: 30 m/min- Rapid Feed B-axis: 24 m/min- Rapid Feed Y-axis: 12 m/min- Slant Bed Angle: 30 degrees- Coolant System Tank Capacity: 10 bar pressure, 2.2 kW pump- Hydraulic Tank Capacity: approx. 14 L (35 bar max pressure)- Voltage / Electrical Connection: 400 V, 50 kVA- Pneumatic Connection: 6 bar- Net Weight Chip Conveyor: approx. 1,000 kg- Net Weight Transformer: approx. 300 kg- Additional Included Equipment: WTO Tool Holder Package, SAMCHULLY 3-jaw power chucks (8" main, 6" sub), Chip conveyor (side discharge), Oil skimmer with endless belt, Automatic tool setter arm, Part catcher & ejector, Bar feeder interface Ledpfx Acoz A T Uuj Aert Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards Lredsywdx Sepfx Ac Ast - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Lrsdpfxjx R Df Sj Ac Aot Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: excellent (used), Manufacturer:REO-USA type: reovib mts 442 Electrical data: 230 V; 60 Hz; dimensions: 610 x 560 x 1180 mm plate diameter: 330-380 mm weight: 223 kg Lredpfjt H Nk Nex Ac Aet

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " Lrsdpjfv Hphjfx Ac Aot height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: excellent (used), Year of construction: 2018, Ref:11138 . 2018 Horizon CRF-362 Creaser-Folder High speed automatic creasing / folding machine designed for both digital and offset printers to crease & fold digitally printed, heavyweight or cross-grained stock in one pass. Avoiding cracking of digitally-printed stocks. Quick and easy set-up and operation is performed through the high resolution colour touch screen. Suitable for creasing covers, restaurant menus, shop cards, invitation cards and laminated sheets. Preparing Perfect Bound Book Covers – sharp, high quality creasing prepares the spine, hinge and flap by selecting up or down creasing. High Quality Folding – two fold knives for high quality folding, even on heavy stocks. 6 different folding patterns can be set up simply by using the icon based touch screen. Specification: Maximum sheet size 364 × 865 mm Minimum sheet size 105 × 180 mm Feeding system Air suction feed belt Feeder pile height 150 mm Normal paper – crease & fold 80–350 gsm Normal paper – crease only 80–400 gsm Coated paper – crease & fold 105–350 gsm Coated paper – crease only 105–400 gsm Ledjzu Divjpfx Ac Aert Laminated stock – crease & fold 0.2–0.4 mm Laminated stock – crease only 0.2–0.5 mm Maximum crease lines 10 per sheet Creasing direction Positive / negative (up or down) Folding system 2 knife-fold units Speed: Up to 4,500 sheets/hour

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Ljdpfewd Nthox Ac Asrt Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct Lrsdpfjx R Dh Hsx Ac Aot   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, The Superfax PF215 letter folding machine, with its easy-to-read display, automatic feeder, and large 500-sheet stacker, is ideal for offices, print shops, mailrooms, and schools. It can handle paper up to A3 size and offers a wide range of folding options, including single fold, letter fold, zig-zag fold, gatefold, double parallel fold, and cross fold, with the ability to create custom folds. It even features micro-adjustment and skew adjustment for perfect folding results. It can process up to 8000 sheets per hour and delivers them onto its exit conveyor. SPECIFICATIONS Suitable for: Mailroom, Print shop, School, Larger office Paper Size: A3 / A4 / A5 Lredpfx Acszz N Epo Ajt Paper Weight: 45 - 105 gsm Fold Types: Z, Letter, Half, Double Parallel, Engineering, and Custom Folds Cross Fold: Yes Sheets Per Minute: 133 Sheets Per Hour: 7980 Feed Tray Capacity: 500 Speed Controller: Variable Piece Counter: Counter with Preset Functions Feed Type: Friction Hand or Automatic Feed: Automatic Feed Tires: 3 x 14mm Multiple Sheets (AKA Manual Bypass): No Conveyor for Exiting Paper: Yes Auto Shut Off: Yes Jam Detect: Yes Reload Whilst Running: No Dimensions W x D x H (mm): 939 x 482 x 558 Weight (Kg): 32

Condition: excellent (used), Year of construction: 2019, Counter: 1,200,000 units Cycle counter: 8,297,167 cycles Hour counter: 5,281 hours Equipment / Additional information: Machine consists of: 1 x Main feeder 1 x Opener 4 x Insert stations 1 x Wrapping system (10,000 cycles per hour) with side sealing 1 x CROSS STACKER RIMA Options: Ljdpfez A Dmhsx Ac Ajrt 1 x Friction feeder 1 x Mosca inline coating unit 1 x 90° curve 1 x Videojet BX 6500 1 x Graftech server TECHNICAL DATA Product infeed: manual as standalone/automatic in line Film: centre-folded and flat film, e.g. PE, PO, PP, bio films, recycled content films Output: max. 10,000 cycles/h Passage width: 10–450 mm Passage height: max. 200 mm Product length: min. 80 mm Film width: max. 1,000 mm (flat film) Film roll diameter: max. 350 mm Control system: Siemens Sinamics D Display: Siemens 9" TP 900 touchscreen Electrical design: in accordance with VDE guidelines Working height: adjustable from 850–950 mm