Used Mulag Mulag Mkf 600 for sale (11,163)

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm Dedpjx R Uw Ssfx Acnjkr * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2010, Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. Dkjdpfx Ajzcfzkscnor - .

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2019, Additional features: * Adapter group for mounting plate, size 3 * Drive for cutting head via PTO pump * Front-mounted mower for right and left-hand operation * Rear weight, parking frame, and hydraulic torsion frame * Hydraulic lateral displacement of the boom arm * Max. lateral reach 7,200 mm * Mulching blades, heavy-duty version * Mulching blade cutting head MK 1200 - working width 1,200 mm with Mähtronic * Proportional control with single-hand control panel Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. * Offer subject to change. * Photos may vary. Price applies to the existing condition. Dsdpfx Aceymmv Denjkr * All information without guarantee.

Condition: used, Year of construction: 2006, operating hours: 32,615 h, functionality: fully functional, machine/vehicle number: R7S017, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, type of input current: three-phase, Colchester Tornado T8MSY CNC Turning Centre TOTAL PRICE: £15,000 +VAT Manufacturer: Colchester / 600 Lathes Model: Tornado T8MSY Year of Manufacture: 2006 Control: FANUC CNC Control 18i-TB Serial No: R7S017 Location: Dynomec, Castleford, West Yorkshire Max Bar Capacity: 65mm Diameter Machine Overview & Specification • Configuration: CNC Turning Centre with Driven/Live Tooling, Sub-Spindle, and Y-Axis • Max Spindle Speed: 5,000 RPM • Electrical Requirements: 415V / 3 Phase / 50 Hz / 53 Amps • Power On Hours: ~32,615 Hours (see control screen image for exact breakdown) • Cutting Hours: ~7,781 Hours (see control screen image for exact breakdown) • Total Parts Count: 307,051 (as shown on control screen) NOTE ON MACHINE HOURS & PARTS COUNT: The screen readings pictured were taken prior to listing. The machine was operated for a couple of days after the photos were taken, so the current power-on hours, cutting hours, and total parts count will be slightly higher than shown. Included Package • Bar Feeder: Tornado MBF1000T 1-Metre Short Magazine Bar Feeder • Tool Holders: Comprehensive assortment of static and live VDI tool holders (as shown in photos) • Collets: Assortment of collets included • Jaws: Assortment of chuck jaws included IMPORTANT NOTE ON TOOLING: Sale includes the tool holders only. Any cutting inserts, drills, end mills, or boring bars pictured fitted inside the tool holders are shown for demonstration and are excluded from the sale. Payment, Collection & Transport Terms • Cleared Funds: Machine will not be released, loaded, or dismantled until full payment has cleared into our account. Dkjdpfx Acozr Ngnsner • Transport & Rigging: The buyer is fully responsible for all machine rigging, lifting equipment, transport, and loading logistics. • Collection Timeframe: The machine must be collected and removed from site within 14 days (2 weeks) of purchase. Additional Terms & Viewings • Pricing & VAT: Price includes VAT. A full VAT invoice will be provided. • Returns Policy: Returns are not accepted. Sold as seen. • Viewings: Viewing under power on site at Dynomec Ltd, West Yorkshire, is heavily recommended prior to committing to purchase so buyers can fully inspect and satisfy themselves with the machine's condition. Viewings are strictly by prior appointment. • Warranty: Sold with no implied or given warranty. • Availability: This item is listed elsewhere; we reserve the right to remove this listing at any time. Contact: For any further information, please contact us directly. A VAT Invoice is able to be supplied with the machine

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 1 x 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. KEY SPECIFICATIONS: Manufacturer: CERTUSS. Model: Universal 600 TC. Date of manufacture: 2021. Steam output: 600 kg/hour. Fuel: Propane (but can be converted). High-efficiency industrial steam generator. Dksdpfezn Rcijx Acnsr Compact vertical design. Fast start-up from cold. Automatic PLC control system. Complete steam generator package with ancillary equipment. Suitable for continuous industrial process steam applications. Condition: Excellent - very low working hours.

Condition: excellent (used), Assortment of SK50 tool holders/tools (approx. 600 pieces). Item Condition: Good used condition. Dsdpoy U Ithefx Acnokr

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Shelf width: 1,000 mm • Frame depth: 600 mm • Shelf load capacity: 150 kg • Number of shelves per bay: 6 • Surface: galvanized • Plug-in assembly • Condition: used Large quantities available immediately. Graduated prices net per piece plus VAT: Basic bay: 1 - 5 bays: €54.00 6 - 20 bays: €52.38 21 - 50 bays: €50.76 From 51 bays: €49.14 Add-on bays: 1 - 10 bays: €39.00 11 - 25 bays: €37.83 26 - 75 bays: €36.73 From 76 bays: €35.69 Dkjdpfxsuk E The Acner Ex works Nordhorn. YOUR CONTACTS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We will be happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually from us. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is understood to be the unit price/net price or as specified in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, storage platforms, textile storage, and machines for retail, industry, and trades. We offer you attractive used offers from various manufacturers/brands on an ongoing basis. If you have any questions, please do not hesitate to contact us. Four wins – The success factors of DLK – Storage technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), Catalogue number 7268 TECHNICAL DATA - Loading hopper dimensions (top) L/W: 1000x600mm - Loading hopper dimensions (bottom) L/W: 650x600mm - Rotor width: 570mm - Motor: 15kW Dkjdpfxezmgkgo Acnsr - Screen: 16x12mm - Knife size: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions L/W/H: 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German production – Not repainted – Very good condition – Used shredder Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 29,900 PLN Net price: 7,120 EUR (based on rate 4.2 PLN/EUR) (Prices may vary with currency fluctuations)

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 25,500 mm Number of bays / racking row: 09 units, each 2,700 mm Number of levels including base level: 02 units Technical data for capacity: Pallet spaces per bay: 06 units Pallet spaces per racking row: 54 units Total pallet spaces: 54 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: n.a. Weight per pallet (max.): 500 kg Included in the scope of supply: 10x Pallet racking uprights, used Material color: Sendzimir galvanized Frame type: P215 Profile dimensions: 120 x 100 x 2.50 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep 36x Pallet racking beams, used Material color: yellow Box profile: 80 x 50 mm Beam type: TRV1-270-085-30 CE Clear span: 2,700 mm Agraffe: 5 hooks Max. load per pair of beams 1,500 kg, with evenly distributed load 72x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 40x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 20x Shims, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Dkjdpfxezb U S Ae Acnjr General information about the item: This item is offered for pick-up only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, axle configuration: 2 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 3.790 kg Axle 1: left 8 mm right 8 mm Djdpfx Acew N Nz Ienjkr Axle 2: left 8 mm right 8 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: excellent (used), The scope of delivery includes: 02x workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted framework) 04x workbench crossbeams, used Material color: RAL 7035 light gray Box profile: 80 x 40 mm Crossbeam type: TRV1-240-084-30CE Clear span: 2,400 mm 08x locking pins, new Design: fully galvanized 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,580 mm Chipboard depth: 600 mm Surface: possibly coated (possibly in two parts) 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,380 mm Chipboard depth: 600 mm Surface: possibly coated (possibly in two parts) 16x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes of the material. The material color may vary. The chipboards can be either coated or uncoated. - The workbenches are supplied unassembled; - The workbench stands are pre-assembled; Djdsi Ewqkepfx Acnskr - The production time is generally approximately 5 working days.

Condition: good (used), Technical data for pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: 01x pallet pull-out, used for rack depth: 800 mm Material colour: blue Overall depth: approx. 810 mm Dkjdpfx Acjww Im Honer Overall width: approx. 1,295 mm Height: approx. 265 mm Pull-out: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, extra costs will apply, which can be provided upon request based on delivery location and order scope.

Year of construction: 2018, condition: new, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Here, we offer you a new post protector from the manufacturer Mecalux for purchase. The post protector is suitable for frame profile widths of up to a maximum of 120 mm. The scope of delivery includes: 01x Post protector, new Material color: orange For stand profile width: approx. 120 mm Overall height: approx. 600 mm Overall width: approx. 132 mm Internal width: approx. 126 mm Overall depth: approx. 70 mm Deflector: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (center-to-center): approx. 400 mm Weight/piece: approx. 4.298 kg 04x Hex head screw: M8 x 25 mm 04x Lock nut: M8 04x Washers: M8 Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply. Shelf inspection Dkjdpfx Acod Rxyrjner Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234 – visual inspection for all racking systems. Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Setup technical data: Number of rack rows: 01 pcs Length per rack row: 27,990 mm Number of compartments per rack row: 10 pcs Number of levels plus floor level: 03 pcs Volume technical data: Pallet locations per compartment: 12 pcs Pallet locations per rack row: 120 pcs Total pallet locations: 120 pcs Assumed configuration: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack frames, used Material colour: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, frame guards, and baseplates Frames are pre-assembled (bolted truss design) Dkedpfx Asyay D Iocnjr Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Material colour: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg (evenly distributed load) Note: The functionality of the beams is not affected by the holes; SSI project with heat-dust plates that were bolted on as per manufacturer’s instructions! 120x safety pins, used Material colour: Sendzimir galvanized To secure the crossbeams against unintentional lifting 44x anchor bolts, new Manufacturer: Hilti Model designation: HST2 V3 M12x105 5-25 Version: carbon steel, galvanized Approved for: cracked concrete 44x shims, used Version: completely galvanized For leveling the rack frames standing on uneven ground 01x load capacity sign With specifications for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), We offer you a used workbench frame for sale here. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x Workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) Dkedpfx Acohvmmtensr 04x Workbench crossbars, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x Locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbenches are supplied disassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), We are offering a used workbench frame for sale here. Dimensions: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in the scope of delivery: 02x workbench stands, used Material color: sendzimir galvanized Stand height: 900 mm Dodpjhvmnbjfx Acnekr Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted frame) 02x workbench crossbeams, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x locking pins, used Design: fully galvanized The images serve to illustrate the material. The material color may vary. - The workbenches are delivered unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Your contacts within our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used post protector from the manufacturer Gemac for sale here. The post protector is suitable for a frame profile width of up to 90 mm. The scope of delivery includes: 01x Post protector, used Material color: cream white Dkedpfxjfdqkaj Acnsr Design: V For stand profile width: approx. 90 mm Overall height: approx. 600 mm Overall width: approx. 113 mm Deflector height: approx. 60 mm Material thickness: approx. 4 mm Hole diameter: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight / piece: approx. 4.888 kg 02x Mounting plates, used Material color: cream white Dimensions: 130 x 91 mm (W x D) Material thickness: approx. 7 mm 04x Hex head screws: M10 x 35 mm 04x Serrated nuts: M10 04x Washers: M10 Our services at a glance: (Prices upon request) Assembly, installation Please note our general assembly conditions Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet (without unloading)

Condition: good (used), clear span: 2,700 mm, load capacity: 3,000 kg, Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Installation Technical Data: Number of racking rows: 01 piece Length per racking row: 16,900 mm Number of bays per row: 06 pieces at 2,700 mm each Number of levels plus ground level: 05 pieces Volume Technical Data: Pallet spaces per bay: 18 pieces Pallet spaces per row: 108 pieces Total pallet spaces: 108 pieces Assumed specifications: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Scope of supply includes: 07x pallet racking frames, used Material finish: sendzimir galvanized Frame type: P113 Profile dimensions: 100 x 100 x 2 mm Including horizontal and diagonal bracing, frame protectors and base plates Frames are pre-assembled (bolted truss structure) Height: 8,000 mm Depth: 1,100 mm 60x pallet racking beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Bracket: 5 HK (Hooks) Maximum load per pair of beams: 3,000 kg (uniformly distributed load) Note: The functionality of the beams is ensured despite the holes SSI project with heat dust shields that, according to the manufacturer's information, were bolted on! 120x Safety pins, used Material finish: sendzimir galvanized For securing the cross beams against unintentional lifting Djdpfx Aex Ebrpjcnjkr 28x expansion anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Design: completely galvanized For leveling the frames installed on uneven floors 01x Load sign With specifications for bay and compartment loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to extra costs, which can be requested separately from us depending on the place of delivery and scope of delivery.

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data of the Installation: Number of racking rows: 01 pcs Length per row: 22,500 mm Number of bays per row: 08 pcs Number of levels incl. ground level: 02 pcs Volume Specifications: Pallet spaces per bay: 09 pcs Pallet spaces per row: 72 pcs Total pallet spaces: 72 pcs Based on: Load carrier: Euro-pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. weight per pallet: 1,100 kg Scope of delivery includes: 09x pallet rack uprights, used Material finish: Sendzimir galvanized Upright type: P113 Profile dimensions: 100 x 100 x 2 mm Incl. horizontal and diagonal braces, upright protectors and foot plates The uprights are pre-assembled (bolted truss construction) Height: 4,000 mm Depth: 1,100 mm 32x beam pairs, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5-hook Max. load per beam pair: 3,300 kg (with evenly distributed load) Note: The load-bearing capacity of the beams remains functional despite the holes— SSI project with thermal dust panels as per manufacturer's specifications screwed on! 64x safety pins, used Material finish: Sendzimir galvanized Dodpfx Aeyaxmhjcnokr For securing the longitudinal beams against accidental lifting 36x anchor bolts, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x levelling plates, used Design: fully galvanized For levelling uprights standing on uneven floors 01x load capacity sign With information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. Any requested transport or shipment of this item will incur additional costs, which can be requested separately from us depending on delivery location and scope.

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the setup: Number of racking rows: 01 unit Length per racking row: 14,040 mm Number of bays per row: 05 units Number of levels plus ground level: 02 units Volume data: Pallet locations per bay: 09 units Pallet locations per row: 45 units Total pallet locations: 45 units Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum pallet weight: 1,100 kg Scope of delivery includes: 06x pallet racking frames, used Material finish: Sendzimir galvanized Frame type: P73 Profile dimensions: 90 x 75 x 2.5 mm Incl. horizontal and diagonal bracing, frame protectors, and base plates Frames are pre-assembled (bolted truss design) Height: 3,600 mm Depth: 1,050 mm 20x pallet racking beams, used Material color: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,300 kg, with evenly distributed load Note: Functionality of the beams is ensured despite holes (SSI project with heat protection plates bolted as per manufacturer’s specifications) 40x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintended lifting 24x wedge anchors, new Manufacturer: Hilti Djdpfxjyapf Ij Acnjkr Type: HST2 V3 M12x105 5-25 Material: Carbon steel, galvanized Approved for: Cracked concrete 12x shims, used Material: fully galvanized For leveling racking frames placed on uneven floors 01x load sign With specification of bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Additional transport or shipping of this item is subject to extra costs, which can be quoted separately depending on delivery location and scope of delivery.

Condition: used, 🧰 Product Features • Condition: Used, see photos • Color: blue, red, yellow • External dimensions without pipes: 145 × 145 × 16 cm • Internal dimensions: 128 × 128 cm • Height incl. pipes: approx. 140 cm and 160 cm • Length of pipes: approx. 130 cm and 150 cm • Diameter of pipes: 35 mm • Load capacity: 500 kg • Stackable: Yes 💰 Price € 39,- net, excluding VAT • Quantity discount: upon request • Shipping costs: available throughout Europe, upon request • Delivery time: available immediately • Inspection and collection: possible at any time by appointment Constantly over 5000 linear meters of pallet racking systems from numerous manufacturers in stock. (Changes and errors in technical data, specifications and prices, as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty shelving used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: Dedpfx Aswz I Tnecnekr • Over 10,000 linear meters of racking available immediately • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving with shelves, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete handover. Whether you came across us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Year of construction: 2013, overall weight: 220 kg, chuck outer diameter: 600 mm, Metal cutting Tooling TDG Spain - 4-600 MACH-ID 9627 Make: TDG Spain Type: 4-600 Year: 2013 Diameter: 600mm 4 chuck: yes Max. speed:970Rpm Length: 1200mm Width: 800mm Height: 400mm Weight: 220kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dksdoy T Ik Repfx Acnsr

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Dsdpfx Acjziwnbenjkr Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Graphic arts companies, Production of albums, catalogs, and covers.

Year of construction: 2018, condition: like new (used), PlateExakt 600 - Cliché mounting device/die-cutting cylinder Dkedsl Ax Uwepfx Acnjr  Age: 1992  Mounting device  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227”  Min. diam.: 60”  Width: 620mm

Condition: used, Year of construction: 2021, We are offering a used Mulag combination mowing unit MKM 700, manufactured in 2021, consisting of: flail mower head MK 1200 Plus, verge mower MRK 300, and verge mower head RMK 1200. Without rear weight. Further details are available upon request. Location: 95326 Kulmbach. Dkedpfx Acszkdvbsnor