Used Mg Tech Lean Box for sale (15,597)

Condition: good (used), Year of construction: 2018, MG Tech Leanbox Case former Fjdpfx Aiewxlm Hovspn Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM6424 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Fsdpfxey Uni Ne Aivepn Manufacturer - ALTech UK Labelling Technologies Ltd. Model - ALritma S. Date of manufacture – 2020. Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter Fpjdsz Hngmopfx Aivjn The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: used, functionality: unexamined, color: white, Plastic cleanroom transport boxes Lockable from top and bottom External dimensions: 78 x 117 x 104 cm Fpjdpfx Aiexn Ninevsn Internal dimensions: 65 x 103 x 90 cm

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) Fsdpfx Aieybtnvsvepn - indexing - insert booklet - seal lid with hot melt glue - index to serialised printing - carton discharge

Condition: new, Year of construction: 2010, functionality: fully functional, space requirement width: 2,700 mm, space requirement length: 3,500 mm, space requirement height: 2,600 mm, overall weight: 5,200 kg, pressure: -1 bar, operating pressure: 6 bar, temperature: 200 °C, filter area: 2.5 m², operating temperature: 200 °C, Reference: C13598 316 stainless steel ATEX nozzle filter drier, 3V Tech 250 FPP/SD FM, with 2.5 m² of filtration surface. Unused equipment, designed for solid-liquid separation processes in the chemical and pharmaceutical industries. Material 316/316L stainless steel Technical specifications Model 250 FPP/SD FM Year of manufacture 2010 Body working pressure -1/+6 bar Body working temperature -25/+200 ºC Total body volume 3450 L Case/jacket working pressure -1/+10 bar Case/jacket working temperature -25/+200 ºC Case/jacket volume 80 + 20 L Equipment configuration ATEX Electrical panels Bag filter Hydraulic unit Centrifugal pump Transport information Length 3500 mm Width 2700 mm Height 2600 mm Weight 5200 kg Documentation CE certificate Certificate ATEX Maintenance Manual Operating Manual Drawings Electrical Diagrams Filtration Area Filtration Area Fsdpfx Aewpf Sqeivepn 2.5 m² Condition Unused Manufactured by 3V TECH

Year of construction: 2020, condition: new, New - Soco Carton / Box Erector Model F-100-5 Never installed Qty 2 available Fjdpfsyvutwsx Aivspn

Condition: excellent (used), Year of construction: 2012, Soco Case / Carton / Box Taper Fully Stainless Steel Top and Bottom Tape Heads (removable) Fjdpfsw Rr Dhox Aivspn Mobile on lockable castors Manual side drive adjustment Manual top head adjustment Tape sizes 28mm to 48mm In excellent condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 467 h, total length: 840 mm, total height: 1,020 mm, total width: 750 mm, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 510 mm, space requirement length: 840 mm, space requirement height: 1,020 mm, space requirement width: 750 mm, 3D printer Evotech EL 102 – professional-grade machine with a large build volume. Original price: €60,000. Inspection possible in Upper Bavaria. Only 467 operating hours! For sale: an Evotech EL 102, a professional FDM/FFF 3D printer manufactured in Austria. This machine is ideal for prototyping, small-batch production, and the manufacturing of functional components with the highest quality requirements. Price negotiable. Technical specifications: - Model: Evotech EL 102 - Printing process: FDM/FFF (Fused Filament Fabrication) - Build volume: approx. 500 × 400 × 510 mm - Extruder: 2 independent extruders (dual extrusion) - Nozzles: 0.4 mm standard (replaceable, other sizes optional) - Layer thickness: 0.05 – 0.6 mm - Print bed: heated, PEEK or metal print plate - The print bed is equipped for mounting print plates with a vacuum system. - Automatic print bed calibration before program start. - Materials: ABS, PLA, PETG, PA, PEEK…, technical filaments with CF+GF and support material. - Two independent filament drying chambers for a better and cleaner process. - Print head and drive servos are cooled. - Temperatures: Extruder up to 410 °C, heated bed up to 120 °C, build chamber heating up to 100°C - Software: compatible with Simplify3D, Cura, Slic3r - File formats: STL, OBJ, G-Code - Power supply: 400 V, 50/60 Hz - Dimensions: approx. 840 × 750 × 1020 mm - Weight: approx. 500 kg Features & Advantages: - Stable all-metal construction for precise continuous operation. - Large, enclosed build volume for demanding materials. - Dual extruder for multi-material and support structures. - Industrial-grade mechanics & control. - Smooth operation, low vibration. Fjdpfx Aoztn Dzeivspn - Optimal for research & development, prototyping and small series production. - The first update package was installed during a service. Condition: - Used, very well maintained. - Fully functional and ready for immediate use. Spare parts + consumables as well as various filament types are included. See pictures. Service: - Loading with a forklift possible. - Transport via freight forwarder. - Offered price is net. - Invoice with VAT possible. We are selling because the machine no longer fits into our service portfolio.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, control type: CNC control, controller model: FSCUT, laser type: fiber laser, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 2,000 mm, table width: 1,000 mm, working length: 2,000 mm, working width: 1,000 mm, type of cooling: water, overall weight: 1,500 kg, Equipment: cooling unit, emergency stop, fume extraction, Z1313 CNC Fiber Laser – 3 kW – Year of manufacture 2023 – only 200 hours of operation – 2000×1000 mm – Private sale – €35,000 Description For sale is a Z1313 CNC fiber laser, manufactured in 2023, from a private owner. The machine has only been used privately, has approximately 200 hours of operation, and is in very good, fully functional condition. Ideal for metalworking, workshops, prototyping, small series production, and precise cutting work. Technical data Model: Z1313 Laser power: 3 kW fiber laser Fjdpfxozrfryo Aivjpn Working area: 2000 × 1000 mm Year of manufacture: 2023 Hours of operation: approx. 200 Condition: very good, ready for immediate use Control: CNC system including operating monitor Software: CypCut cutting software (FSCUT controller) DXF/AI/SVG import Automatic nesting Material library Height control (BCS system) Cooling: 3 kW chiller Extraction: available Control cabinet: complete Accessories: various tools, clamping devices, small parts Reason for sale: No longer needed Special features: Private sale → no VAT, no guarantee

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 70000121, number of ink cartridges: 6, color channels: 6, number of print heads: 8, resolution (max.): 360 dpi, paper width (min.): 400 mm, paper width (max.): 2,800 mm, paper height (min.): 400 mm, paper height (max.): 3,700 mm, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, raster image processor, DIP-TECH GlassJet PRO 16PH – Industrial Digital Glass Printer A professional solution for digital ceramic ink printing, designed for medium to large-scale glass processing facilities. Digital Ceramic In-Glass Printing: Technology that makes the print as permanent and durable as the glass itself. Design Flexibility: Capable of printing photorealistic images, vectors, textures, and imitations (e.g., sandblasted glass effect). Robust Construction: The roller conveyor system (flatbed gantry) ensures maximum precision even with heavy glass loads. General Specifications: Manufacturer: Dip-Tech Model/Type: GlassJet PRO 16PH Serial Number: 70000121 Year of Manufacture: 2009 Number of Print Heads: 8 installed (expandable up to 16) Ink Type: Digital ceramic ink (requires tempering/firing after printing) Control Language: English Maximum Glass Size: 2800 x 3700 mm Minimum Glass Size: 400 x 400 mm Fpsdpfx Aioy Ia E Aoven Glass Thickness: 2–19 mm Performance & System: Print Resolution: Up to 360 dpi Number of Color Channels: 6 channels (BGWORK: Blue, Green, White, Orange, Red, Black) Control Software: GlassJet Operating System / Durasst RIP Print Head Type: Spectra Nova Transport System: Automatic roller conveyor Condition: The machine is in very good visual and technical condition, regularly maintained through its control system. It is sold with all accompanying documentation and technical drawings. A set of spare parts is also available upon request.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1x steel container, steel box, crate, metal box with lid Fpsdpfx Aszckfnjivsn 32 units available Dimensions: 120x100x77 cm With lid Hot-dip galvanized Completely closed and sealed bottom Very good condition, see pictures. Forklift available for loading. Pickup only by appointment in 75053 Gondelsheim. Shipping via freight forwarder is possible, please inquire with your postal code.

Condition: new, Year of construction: 2016, functionality: fully functional, BHK-TECH MW50-2V Microwave System System and Functional Description Microwave system consisting of two MW50 V microwave modules, an internal conveyor system, and two external conveyor systems. The actual microwave chamber consists of a 3 mm stainless steel sheet and has control cabinet segments permanently mounted along its length, in which the high-frequency components are installed behind mechanically and electrically secured covers. The conveyor system for transporting the pallet within the system is designed in a microwave-encapsulated form. The microwave system is equipped with a total of 32 magnetrons, which directly emit energy into the chamber's interior. This technology guarantees uniform energy distribution within the chamber. The magnetrons can only be activated when the door is closed and securely latched. The sealing system on the door opening prevents microwave leakage. Any resulting fumes are extracted via 2 exhaust fans with a total conveying capacity of 17,000 m³/h (free-blowing). The necessary cooling of the high-frequency components is provided by the airflow from the exhaust fans, supported by 4 supply air fans (conveying capacity, free-blowing, approx. 3,500 m³/h). In front of the system, there is one conveyor system each with its own drive. The pallet is manually loaded and unloaded by the customer. Fpjdpfx Aiowhvcwsvsn Sensors are used to check whether the pallet is positioned correctly on the conveyor system. The program is started via a switch on the control panel. The loaded pallet is transported into the microwave system and positioned using a light barrier. The doors of the microwave system are closed, and the microwave irradiation is activated. After the microwave irradiation time has elapsed, the door is opened, and the pallet is transported to the unloading conveyor system. The activation time of the magnetrons can be pre-selected in four power levels on the main control panel. Manufacturer: BHK-TEC Microwave oven type: MW50-2V Number of magnetrons: 32 Voltage: 400 V 50/60 Hz Connection: 70 kW Fuse: 250 A Frequency: 2450 MHz Compressed air: 6-10 bar Year of manufacture: 2016 Emissions Sound pressure: 80 dB Frequency: 50/60 Hz Exhaust air: 2 x 8500 m³/h Supply air: 4 x 3500 m³/h Supply air connection: 2 x 346 mm ø Exhaust air connection: 1 x 465 mm ø Dimensions and Weight Microwave oven: (L x W x H) 3735 x 2373 x 4756 mm Min. room height: 5000 mm Usable interior space: (L x W x H) 3100 x 1200 x 1200 mm Max. permissible conveyor system load: 3000 kg Max. permissible total weight: 9000 kg Empty weight: 6000 kg Control cabinet: (L x W x H) 3800 x 520 x 2250 mm Weight: 700 kg The machine is in absolute new condition. The machine has never been used. New price: €300,000. More ovens in other sizes - new and used - can be found in our shop! International shipping costs upon request!

Condition: excellent (used), Soco Case Sealer / Box Taper Fodpfx Aiszzl N Rsvopn In excellent condition Top and bottom tape heads Manual side drives adjustment Manual top head adjustment Three phase power Mobile on lockable castors

Condition: new, Year of construction: 2026, functionality: fully functional, Cardboard machine, Vision 2800, automatic type for processing continuous cardboard from a stack Fjdpfx Aijz I T Ilsvopn Machine description: The machine listed here belongs to the series of statically operating machines, meaning that the processing operations across the machine are carried out on the stationary cardboard. The machine is designed for high productivity. The maximum working width of the cardboard is 2,800 mm. All tool settings are performed automatically. 1) Main machine body (cardboard cutting machine): Linear cross-cutting unit for head and foot cuts and cross cuts on the cardboard. Linear cross-scoring unit for cross-scoring on the cardboard. (Delivered as a cross-scorer, cross-scorer with perforation function) Longitudinal scoring units from above for longitudinal scoring on the cardboard. Longitudinal cutting units for performing longitudinal cuts. 2) Cardboard magazine, 7-position 7 cardboard magazines provide the storage and feeding of the raw cardboard to the processing machine. Stack height of continuous corrugated cardboard up to a maximum of 2,200 mm is possible. 3) Control cabinet, control system, electronics: Contains all components required to operate and control the system. The components in the control cabinet are based on Siemens.

Condition: used, Year of construction: 2019, functionality: fully functional, Flexographic printing machine Rotary Print 260 from 2019, Tech-Wash 8 UV colours Manual colour registration Web guiding control Fsdsxrdb Hepfx Aivepn One die-cutting station Web width: 250 mm Max. roll diameter on unwinder: 1000 mm Max. roll diameter on rewinder: 1000 mm Max. roll diameter (matrix) on rewinder: 500 mm Machine working speed up to 120 m/min depending on material type Units for web-turning, peel-off, lamination included Comes with 10 anilox rolls, 7 sets of printing cylinders, and 7 magnetic cylinders. Machine is 100% operational and in continuous use.

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 Fpsdpfx Aispy Uzyevjn The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" Fodpexmthrsfx Aivopn DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52000901-01, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, type of input current: AC, overall weight: 3,300 kg, Equipment: documentation/manual, CNC lathe in very good condition for sale. Turret head with 8 tool positions. Hydraulic chuck D160 with numerous spare jaws. Fpsdpfx Aiszxy Ngoven Complete documentation is available. For further information or videos, please contact me privately!

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, - Deburring the edges of objects, - Achieving the desired surface roughness. Fjdpfx Aiozvdfaevopn Technical data: - Width: 1470 mm - Depth: 1600 mm - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm - Abrasive circulation: pressure-fed - Hand openings: 2 - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 300 h, The price includes the machine from the demo center, plus an additional container and a second build platform. - Build volume: 250*250*250 - Scan speeds up to 12 m/s - Layer thicknesses starting from 0.05 mm - Accuracy of +/- 0.1% across the part length Fsdpfx Aishvim Eevopn - Granite recirculating frame - Control of key operating parameters - Pump-fed refill capability - High-performance vacuum recoating system - Key components from Spectra-Physics, Advanced Optowave, SCANLAB, and Panasonic. The machine features an open material platform – consumables from all manufacturers can be sourced and processed directly. Transport, commissioning, and consumables are not included in the price. The local UnionTech partner will handle assembly, training, and service!

Condition: new, Year of construction: 2026, Soco Case Sealer, Model T10 Standard Product Specifications • Capacity 30 units/min • Galvanised steel body construction • 50mm high grip side drive belts • Tape width range 32mm 55mm • Top & Bottom tape heads • Manual side drive adjustments • Manual height adjustments • Three phase power supply • Machine dimensions 1170mm L x 740mm W • 50mm tape overlap on box Fjdegq Nx Ujpfx Aivjpn We supply a full range of Soco Equipment and spare parts

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 100, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 0.4 kW (0.54 HP), input frequency: 50 Hz, electrical fuse: 16 A, Product distributor with 8 outlets and cutting system for kebab strips For sale: complete stand-alone product distributor/splitter with 8 outlets, designed for the even distribution, extrusion, and cutting of kebab strips or similar meat products. The unit is sold as a stand-alone machine, complete with a support frame, pneumatic cutting system, and product conveyor belt. A vacuum filler or other dosing machine is not included. Technical specifications: Product distributor with 8 outlets Splitter model: 160/76/8/DN32 Separate eccentric impeller pump system per outlet Rotors interconnected via a central drive shaft Main housing and impellers made of stainless steel Rotors and rings made of wear-resistant technical polymer Standard product connection: DN65, length approximately 500 mm Outlets equipped with DN32 swivel couplings Outlets at an angle of approximately 30° Shape and dimensions of the extrusion outlets depend on the existing design Includes tools for disassembling the rotors Mobile stainless steel frame Stainless steel C-frame Suitable for positioning above a conveyor belt or packaging machine Mobile on wheels Height adjustable by approximately ±30 mm Robust and hygienic design for use in the food industry Pneumatic cutting system Cutting system for all 8 outlets Pneumatically driven cutting mechanism Mounted on the front of the outlet manifold Stainless steel cutting blade Equipped with a safety guard Includes a safety microswitch Cutting cycle can be synchronized with an external vacuum filler or dosing machine Product conveyor belt Stainless steel construction Variable belt speed Length: approximately 1,000 mm Working height: approximately 900 mm ±50 mm Width adjusted to the 8 product outlets Fpsdpfx Aszqc U Neivon Includes an electrical and pneumatic switch cabinet Equipped with a safety guard and safety switches Suitable for: Kebab strips Meat strips Ground meat and meat products Production across 8 uniform lanes Automatic loading onto a conveyor belt or packaging line

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The equipment is available for sale as a complete system or in individual parts/components. Fpjdsymb Tqspfx Aivjn DIP-TECH AR 6000 digital glass printing system, manufactured in 2013, with an integrated drying module. The machine can be dismantled and sold as spare parts. This is the last opportunity to purchase a complete, fully operational system. Please contact us for further information, specifications, photos, available components, and pricing. Technical specifications: • Max. glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly onto glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – suitable for tempering • Printing technology: Digital ceramic in-glass printing • Application: Architectural and interior glass • Glass types: Float, tempered, laminated Key Advantages: ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural, and interior glass ✔ Machine in production – ready for immediate operation

Condition: used, Year of construction: 2007, functionality: fully functional, HWACHEON HI TECH 200 B FANUC CONTROL MAX TURNING DIA 350 MM MAX TURNING LENGHT 400 250 MM HYD 3 JAW CHUCK Fodpfxoz N Dfls Aivjpn TAILSTOCK SLOTTED TURRET YEAR 2007 TOOL SETTER