Used Mg Mh 2010 B for sale (41,408)

Condition: good (used), Year of construction: 2003, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Current new price incl. accessories: approx. € 90.000 Special price on request Lrjdpfx Ajz N Hxhobyeu Equipment: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll design offers a wide range of bending and rolling capabilities - MG NC control unit "ELAP LYNX" * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Movable control panel - Two central rolls driven directly by hydraulic motors - Conical rolling possible via roll tilting - Side roll parallelism maintained via torsion shafts - Pre-bending on both ends - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls (hardness: 53–55 HRC) - Low-maintenance, robust machine design - Permanent lubrication for all bearings - Sturdy welded steel construction - Selectable bending speeds (2 settings) - Electro-hydraulic drop-end bearing for easy removal of rolled parts - Pressure gauge/display for rolls - Safety system (safety trip wire with switch unit) - Operating manual (PDF)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 Lsdpjwhk E Hsfx Abysru AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2020012.010, total height: 870 mm, total width: 750 mm, total length: 1,400 mm, Equipment: documentation/manual, COMMERCIAL SALE As part of the liquidation of a company, we are selling the following used packaging machines. All machines offered are fully functional and were used in ongoing operations until recently. If you have any questions about the individual machines, possible combinations, or further details, please do not hesitate to contact us. Delivery and collection are possible by arrangement. Location: 41564 Kaarst-Holzbüttgen 1. & 2. Simons+Harren carton sealer NH-FJ-2 Two identical semi-automatic carton sealers, type NH-FJ-2 - 1x manufactured in 2020 - 1x manufactured in 2018 Technical data (both machines): Ledpfjz S Hwvjx Abyoru - Operation: manual / pneumatic, 230 V - Sealing: Tesa adhesive tape - Dimensions: L 1,160 x W 970 x H 750 mm - Carton sizes approx.: L 150–∞ x W 120–470 x H 120–450 mm Price, manufactured in 2020: 3,000 EUR net Price, manufactured in 2018: 2,500 EUR net 3. Youngsunpack carton sealer MHFJ1AB (2013) Semi-automatic, 230 V, Tesa adhesive tape Dimensions: L 1,100 x W 770 x H 700 mm Carton sizes approx.: L 150–∞ x W 120–480 x H 120–480 mm Price: 1,000 EUR net 4. Heripack HV-TX52.B (2018) Semi-automatic carton sealer / bottom closing machine 230 V, Tesa adhesive tape, automatic format adjustment Dimensions: L 1,400 x W 750 x H 870 mm Price: 2,700 EUR net 5. Simons+Harren bottom flap folding machine CF-10T (2017) Pneumatic side gusset folding machine Dimensions: L 1,400 x W 750 x H 870 mm Carton sizes: L 200–600 x W 150–480 x H 120–500 mm Price: 1,700 EUR net 6. Heripack bottom flap folding machine HB-Sonder (2020) Pneumatic/electric, side gusset folding machine Optimized for combination with item 4 (HV-TX52.B) Dimensions: L 1,650 x W 740 x H 750 mm Carton sizes approx.: L 150–800 x W 110–400 x H from 90 mm Price: 2,500 EUR net (Particularly attractive as a set with HV-TX52.B) All machines are available individually.

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Lodpfjz Snpvox Abysru Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: used, B&R 2010 DO430 digital output - housing renewed - compatible with all B&R 2010 controls - removed from running machine - removed from Ferromatik MV 200-970 - fully functional Ljdow Ah Nxjpfx Abysru manufacturer: Ferromatik Milacron type: B&R 2010 sparepart no.: 10010690 manufacturer no.: 2DO430.6

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, The Foellmer Duplikator DigiTab 2010 Plus numbering and marking device (printing – counting – marking = 1 process) features menu-guided operation via a touchscreen display located on the rear of the housing. The mobile and height-adjustable stand is positioned on the side of the delivery area for most machines. Any number from 5 to 99999 can be set for the numbering strip. Stepless adjustment of the strip length from 20-200 mm and a dwell time of approximately 0-10 seconds for the numbering strip are possible. The Suptramat enables the control and waste sheets removed from the printer during continuous production to be deducted from the total count, and simultaneously, the package size marked by the strip is adjusted accordingly. The total counter records the total print run of the good sheets, after it has been corrected by the Suptramat. Ledpoz Ixizofx Abysru To connect the DigiTab, a universal connection box is required for an interface with a potential-free or 24 V pulse (clock) signal directly from the machine or from a sensor.

Condition: used, Year of construction: 2010, operating hours: 62,569 h, functionality: fully functional, machine/vehicle number: 00410001121, spindle speed (max.): 5,000 rpm, overall weight: 5,695 kg, Equipment: documentation/manual, We are offering this used DMG CTX beta 500 V6 CNC turning and milling center, year of manufacture 2010. Serial number: 00410001121 Year of manufacture: 2010 Max. main spindle speed: 5000 rpm Max. counter spindle speed: 6000 rpm Weight: 5695 kg Lrodszv Tbqepfx Abysu If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) Lodszwl Dmepfx Abyeru of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN 04/17, Take your clinic, rehabilitation centre, or sports facility to the next level with the KrioSystem KR-2010 Whole-Body Cryochamber, a premium cryotherapy solution from one of Europe's leading cryogenic technology manufacturers. Designed for high-performance medical, rehabilitation, and sports recovery applications, the KR-2010 treats 20–30 patients per hour while accommodating 2–4 patients simultaneously at therapeutic temperatures ranging from -110°C to -160°C. Powered by liquid nitrogen and equipped with advanced safety systems, including oxygen monitoring and emergency alarms, this medical device delivers safe, effective, and clinically proven whole-body cryotherapy for pain relief, injury recovery, arthritis management, improved circulation, muscle relaxation, and enhanced wellbeing. Lredezq At Ejpfx Abyeu Ready to ship container.

Condition: excellent (used), Year of construction: 2010, MaXXturn 65 SMY (Siemens) CNC TURNING CENTER FOR COMPLETE MACHINING WITH POWERED TOOLS, C-AXIS, AND Y-AXIS Linear guide system, digital drive system. Spindle motor (ISM) on the main and counter spindle with thermal compensation system (liquid-cooled). State-of-the-art control technology SINUMERIK 840D with ShopTurn dialog programming. Main spindle: A2-6" connection (DIN 55026) * Drive power: 29 kW * Speed range: 0-5000 rpm Counter spindle: A2-6" connection (DIN 55026) * Drive power: 22 kW * Speed range: 0-7000 rpm Tool system: * 12-position tool turret VDI 30 radial, with direction logic for up to 12 powered tools * Power: max. 6.7 kW Ledpfx Asz Sq Sdjbyeru * Torque: max. 25 Nm * Speed range: 0-5000 rpm * C-axis on the main and counter spindle Y-axis: * Travel range: +/- 40 mm * Rapid traverse speed: 12 m/min Includes: * Coolant unit for spindle head * Hollow chuck incl. draw rod * Sinumerika 840D/PCU20 control * SHOPTURN dialog programming * RS 232 interface * Machine light * Coolant system incl. coolant pump 3.5 bar * Chuck flushing (additional pump (3.5 bar)) * Part ejector and flushing through the counter spindle * Control cabinet air conditioning * Hydraulic unit * Interface for chip conveyor * Documentation * CE certificate Machine no. S6AY1202 Year of manufacture: 2010

Condition: excellent (used), Year of construction: 2013, operating hours: 3,000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 suction cups, side and longitudinal stops, LED position display for vacuum suction cups Venture 316 Future Package 10 extraction rails, Power-Clamp connection, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units, single operation: 3300 mm; pendulum operation: max. 1740 mm Tool diameter 25 mm: single operation: 3475 mm; pendulum operation: max. 1915 mm – Workpiece width: Front stop: 950 mm all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping devices – Up to max. 60 mm with standard clamps SAFETY AND PROTECTIVE EQUIPMENT: EC-compliant; Safety enclosure on the right with door Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer (side mounted) Drilling head with 16 spindles (V12/H4/S0/90°) DRIVE5C+ interface for aggregates Tool length measuring probe Software for position measurement and CNC coordinate rotation Tool transfer station Coolant tank for processing spindle Vacuum pump 300/360 m3/h Ledpfxey E Npfs Abyoru Powerclamp pneumatic package Control system: POWERCONTROL PC85 with POWERTOUCH system; IPC POWERPACK Operator terminal for program start; camera system with tablet PC WOODWOP CAD/CAM standard interface Documentation and control texts: German Delivery includes only the tools and HSK tool holders shown in the images!

Year of construction: 2024, condition: new, Power Prestretch Machine, Lrjdpfx Ajxwa Hvobyju Machinery semi automatic power pre stretch pallet wrapper Product Various palletised loads Machine data Turntable diameter 1650mm Max height of load 2400mm Max load 2000kg Power requirement 230v AC, 50 Hz, 10 amps. Turntable Chain drive, 1650mm diameter, variable rotation speed, soft start and stop, exact stop positioning to allow easy unloading of pallet, access point allowing easy inspection/lubrication of drive chain, inverter controlled drive motor Film carriage Power pre stretch film carriage, easy loading film system for quick changing of film rolls, inverter controlled pre stretch motor drive with variable stretch, rubberised film drive rollers, photoelectric cell to automatically detect the top of the pallet Carriage lift Twin chain drive for lifting of carriage, adjustable rise/fall rate, inverter driven motor, adjustable top/bottom stops Wrap patterns Adjustable for: amount of overlap, top and bottom number of wraps, number of passes up and down, tension of film, height of wrap on load. Wraps available:- Up and Down, Up only, Manual or Top Sheet Wrap. Loading ramp Chequer plate loading ramp (or ring to sink into ground) Features Foldable mast with lockable panels for access to electrical components and film carriage drive, easy to use menu driven controls as well as rotary knobs for adjustment of turntable speed, carriage rise / fall rate and amount of pre stretch, E stop circuit VAT to be added to final price Ramps £295 plus VAT Delivery approx £250 plus VAT

Condition: excellent (used), operating hours: 2,661 h, lifting height: 18,390 mm, fuel type: diesel, General information Year of manufacture: 2010 Year of construction: 2010 Technical information Drive: Wheel GVW: 9.888 kg Dimensions (LxBxH): 815 x 246 x 269 cm Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 2.039 cm Ledps Aa Tg Ssfx Abysru CE mark: yes Condition Technical condition: very good Visual appearance: average Additional information Please contact Ton for more information Manufacturer: Genie Type: Z60/34 Year of manufacturing: 2010 Weight: 9.888 KG Hourmeter: 2661 Drive: Diesel, 4x4 Product number: 26051 Platform height: 18,39 m Working height: 20,39 m Platform measurements: 76x183 cm Maximum outreach: 11,05 m Total measurements LxWxH: 815x246x269 cm Max. platform load: 227 Machine is technically in good condition. Documents incl. CE. Price: € 17.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: used, Year of construction: 2017, HOMAG PROFI BMG310/42/F/K – 5-Axis CNC CNC machining center in gantry design for wood and wood-based materials, year of manufacture 2017. Equipped with a Drive5C 5-axis main spindle, cantilever table with LED positioning aid, and a permanently installed drilling unit. Technical data Manufacturer / Model: HOMAG PROFI BMG310/42/F/K Year of manufacture: 2017 Design: CNC machining center in gantry design 5-axis head: Drive5C, HSK F63, 0-24,000 min⁻¹ Lrodpfx Ao Advkbjbyju Spindle power: 10 kW S6 / 9 kW S1 Swivel ranges: A: ±100° / C: ±361° (position-dependent) Workpiece length: 4,200 mm standard working area; up to 4,375 mm with a Ø25 mm cutter Workpiece width: 1,350 mm; up to 1,600 mm at the rear stop with a Ø25 mm cutter Workpiece thickness: Max. 300 mm including clamping devices Cantilever table: 8 manual consoles, Y = 1,350 mm, LED position indicator Tool changer: 14-position disc changer + 8-position linear changer (nominal) Drilling unit: 31 spindles: 21 vertical / 10 horizontal Notch saw: 0/90° swiveling, saw blade Ø125 mm Vacuum system: 290 m³/h at 50 Hz, frequency-controlled Control / Software: powerTouch, woodWOP 9.0; Windows 10 Enterprise LTSC Media connections: 400 V / 50 Hz, compressed air min. 7 bar Extraction: Connection Ø250 mm; 4,950 m³/h according to connection data sheet Scope of delivery The complete machine with the permanently installed machining units described above is offered. Loose additional units and accessories are not included in this offer. Price and exact availability upon request. Information on working areas depends on the tool and clamping devices used. The scope and transferability of the software license must be clarified in each individual case. Location: Germany. Planned availability: Week 06/2027; exact date to be agreed. Price upon request. Operating hours and software (recorded on 20.10.2026): Main operation: 2,581.47 h Secondary operation: 1,609.12 h Total operation: 19,021.39 h The data corresponds to the designations of the machine control; no separately indicated spindle hours. Software version: woodWOP 9 Executable 9.0.1034.0; Microsoft Windows 10 Enterprise LTSC 1809 x64.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Lrodpoz Rrbwofx Abyou Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: used, Year of construction: 2006, machine/vehicle number: OTW, Schmalz vacuum lifter with a load capacity of 125 kg Lrodpfx Aoy Hf Itsbyeu Dimensions: 180x80 cm, suction pads are fully adjustable. These are porous and should be replaced. 4 suction pads, each with a diameter of 140 mm Connection: 400V 16A Good condition, see pictures Item location: 75053 Gondelsheim Shipment via freight carrier or collection by appointment only

Condition: ready for operation (used), Year of construction: 2019, clamping force: 1,200 kN, total width: 2,200 mm, total height: 2,065 mm, overall weight: 8,450 kg, product length (max.): 5,259 mm, Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5" full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine. • Tie-bar-less design Lredpfx Asz I Nixsbyou • Machine hours: on-time 2,767 h; estimated operating time ~200 h (never used for regular series production) • Oil filling: 300 L • Power supply: 3x400 V + N + PE / 50 Hz • Control system: CC300, 21.5" full HD touchscreen • Hydraulic system: ecodrive SHV3-HSI servo-hydraulic • High-speed injection with accumulator • Oil cooler: standard • Injection unit size: hydraulic 200 • Platen size: standard Euromap • Mould height: increased +200 mm • Opening stroke: extended +200 mm • Ejector system: platen ejector • Core pull: hydraulic and pneumatic • Cooling water connections: machine and mould separate • Flow regulator: 0–10 l/min • e-flomo temperature control system: 4 and 6 circuits • Remote service: e-connect.24 (2 years) Additional equipment • Robot: ENGEL viper 12 RC300 • Max payload: 12 kg • Strokes: Z 1,160 mm; X 600 mm; Y 900 mm • C axis: pneumatic 0–90°, 30 Nm • Max system height: 3,600 mm • Min deposit height: 1,000 mm • Integrated conveyor belt • Belt width: 350 mm • Belt temperature resistance: up to 300 °C • Temperature control unit: HB-Therm Thermo-5 HB-160Z1 • Max temperature: 160 °C • Heating power: 8.0 kW • Pump: 0.50 kW, 30 L/min, 52 m • Cooling capacity: 30 kW @ 60 K • Vacuum pump: Pfeiffer DUO 35, 32 m³/h • Induction heating system: 50 kW, 50–200 kHz • Melting chamber: max ingot weight 100 gNo plastic extruder included!

Condition: good (used), operating hours: 1,008 h, lifting height: 8,890 mm, fuel type: electric, General information Year of manufacture: 2010 Year of construction: 2010 Technical information Drive: Wheel GVW: 6.598 kg Dimensions (LxBxH): 531 x 119 x 205 cm Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.089 cm CE mark: yes Condition Technical condition: very good Visual appearance: average Additional information Please contact Ton for more information Manufacturer: Genie Type: Z30/20N Year of manufacturing: 2010 Weight: 6598 KG Hourmeter: 1008 Drive: Electric, 4x2 Product number: 26031 Platform height: 8,89 m Working height: 10,89 m Platform measurements: 76x117 cm Maximum outreach: 6,25 m Total measurements LxWxH: 531x119x205 cm Max. platform load: 227 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 8.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Lrsdpfx Aoz Avyvobyeu Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: used, B & C Italy Automatic Filling, Ingredient Dosing, Ingredient Mixing, Weighing, Small Bag Form & Filling 5 - 200 |Lts Bags, Bulk Bag Filling 1 - 2 Ton, Bag Penetration Device for Hole Insertion in Small Bags, Palletising Line Currently used for Peat Processing and bagging Lrsdpfx As Adq N Sjbyou The line is currently powered up and can be seen running (without product) Video of line running available

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction Lrsdpfx Absz Eq Epeysu WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Lrsdpfswf Sfvex Abysu Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, machine/vehicle number: 14153, Rotor blades = 3 Stator blades = 3 Lrjdpfxj Aa D Dzs Abyeu Drive power: 4 kW

Condition: used, Year of construction: 2015, Type: MHS Basic H 12mm Voltage: 230 Ljdpfxjyzzu Es Abysru

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. Lodpszuyqiofx Abysru - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Yaskawa Robot MH12F-6Ppro/FMB Unirobot Year of manufacture: 2016 Internal machine number: 49 Drawer module Transfer and centering module Lredpezwt Tvofx Abyju Interchangeable 2-point double gripper, standard Robot cell data: Dimensions (L x W x H): 2500 x 2000 x 2373 mm Space requirement: 5000 x 3000 mm Operating voltage: 3 x 400 V, 50 Hz Control voltage: 24 V DC Power consumption: max. 1.5 kVA Technical data, robot controller: Type: FS100 Dimensions (H x W x D): 470 x 200 x 420 mm Cooling system: indirect cooling Interface: USB interface (2.0), RS232C and LAN (100 Base-TX710 Base-T)