Used Müller Martini Warenkleber 423 Mit Robatech Hotmelt Concept B 5/2 for sale (111,390)

Year of construction: 2006, condition: ready for operation (used), 2 x Müller Martini Warenkkeber 423 with Robatech Hotmelt Concept B 5/2, year of manufacture 2006 Kdodpsxfwvqsfx Akpju for Müller Martini Tempo saddle stitcher. Good condition

Condition: new, Müller Co-Ax 5-PCS-2 10 NC valve with external 24V DC actuator, unused, 100% functional, scope of delivery as shown in the photos. Kdjdpfx Akei Eb Taspju

Condition: new, Müller co-ax 5-PCS-2 15 NC valve with external drive, 24V DC, unused, 100% functional, scope of delivery as shown in the photos. Kdedpfxji Eb Tds Akpeu

Year of construction: 2016, condition: like new (used), functionality: fully functional, machine/vehicle number: 1109675-001, Robatech Concept Diamond 5/2 Hot Melt Melting Unit Manufacturer: Robatech Model: Concept Diamond 5/2 Article Number: 164001 Serial Number: 1109675-001 Year of Manufacture: 2016 For sale is a Robatech Concept Diamond 5/2 hot melt melting unit, used in an industrial setting. The unit was used in 2019 in a coating system for the production of stair treads. Kdjdpfx Akjzfx A Ejpeu In the same year, the system was upgraded to a larger Robatech Concept Diamond 8 system because a higher melting capacity and conveying performance were required for production. Therefore, the machine offered here was not replaced due to a defect, but solely due to the increased production requirements. Since then, the unit has been kept as a backup machine. Equipment according to Robatech configuration: * 5 kg tank * Gear pump ZPC 5 * 2 sockets with a total of 4 heating zones * Level sensor ILS * External USB interface * Quantity control * Analog input 0–10 V or 4–20 mA * Pneumatic pressure control with pressure gauge for 1 pump * Filter cartridge sintered bronze 130 µm * Connection: 400/230 V AC, 3LNPE, 50–60 Hz, 25 A Technical data: * Type: Hot melt melting unit / Adhesive Melter * Tank size: 5 kg * Pump type: ZPC/GRC * Number of pumps: 1 * Year of manufacture: 2016 * Serial number: 1109675-001 The unit is in good used condition. Inspection is possible by prior appointment. Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2011, operating hours: 12,500 h, Ref:11160 . 2011 Muller Martini Acoro A5 Preparation Binder ONLY 12,500 HOURS WORKED! Preparation line for producing lined book blocks for hard cover production or soft bound books. Comprising: Triple hand feed element to spiral raceway element 3641 M.M. 3648 Twin end sheet feeders with Robatech hot-melt gluing M.M. Automatic motorised make-ready with “Commander” control system M.M. ‘Acoro A5’ binder with 20 x 21” Combi-clamps ICS 80 & ICS 30 Hot-melt pre-melt tanks Hot-melt spine gluing Hot-melt side gluing Gauzing/lining unit Pile/rotary cover feeder with pressing & nipping station 2nd nipping station Lay-down delivery unit to; Ksdpfx Aez Izapekpodu Flat conveyor system (details on request) to; M.M. 3671 ‘Merit S’ automatic pile trimmer with auto setting. Specification: A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Kdodpfx Akey Hmfyopeu Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: used, Year of construction: 2008, Manufacturer: Fritz Müller Machine type: Hydraulic drawing press Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 General overhaul: 2008 Total drawing force, press ram: 1,000 – 12,000 kN Drawing force: 7,000 kN Holding force per cylinder: 200 – 1,250 kN Ram surface area: 3,500 × 2,200 mm Max. ram stroke: 1,330 mm Max. drawing depth: 430 mm Ksdpfx Akey Ndz Rspsdu Distance, table – holding cylinder, top dead center: 2,700 mm Distance, table – holding cylinder, bottom dead center: 1,420 mm Distance, table – ram, top dead center: 2,500 mm Distance, table – ram, bottom dead center: 1,200 / 1,600 mm Hydraulic table cushion, one-piece: Displacement force: 800 – 2,500 kN Stroke: 0 – 300 mm Cushion surface area: 2,700 × 1,200 mm Table clamping surface: 3,500 × 2,200 mm Clear width between guides: 3,550 mm Max. tool weight: 32 t Max. plate width: 2,200 mm Max. plate length: 1,600 mm Sheet metal thickness: 0.5 – 2.5 mm Feeding height above table: 650 – 900 mm Max. single part weight: 40 kg Max. stack height: 450 mm Max. weight per plate stack: 4.5 t Single or double plate feeding possible Electronic double sheet control available Rapid descent speed: max. 500 mm/s, unregulated Working speed: 30 – 115 mm/s Return speed: 30 – 600 mm/s Documentation: No digital data available Drawings: Partially available as ink drawings; on-site inspection possible Packing lists: No packing lists with individual weights available

Condition: excellent (used), Year of construction: 2023, Complete Robatech hot melt adhesive system for a folding and gluing machine, consisting of 3 guns, fully overhauled in May 2026. Kdsdpfxszlal Uj Akpju

Condition: excellent (used), MEDIUM CUT FOR MÜLLER MARTINI 305 Ksdpfxodyinde Akpjdu Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: used, Year of construction: 2003, Format: 390 x 285 mm Equipment: Book stacker Book Format Dimensions (Height x Width) Minimum format: 115 x 100 mm (down to 115 x 70 mm with optional small-format modifications) Maximum format: 390 x 285 mm (up to 390 x 310 mm with specific produ Book Thickness Minimum thickness: 5 mm Maximum thickness: 90 mm Ksdpfx Akjzphl Rjpodu Stacking and Pile Height Maximum stack / pile height: 340 mm Operational Performance Mechanical capacity: Up to 3,900 cycles per hour (or roughly 65 cycles per minute) Infeed and Rotation: Features a built-in turning device capable of rotating the blocks gently

Condition: used, Year of construction: 2018, operating hours: 5,400 h, functionality: fully functional, Equipment: compressor, documentation/manual, Muller Martini Presto 2 Year: 2018 Approximately 5,500 operating hours Equipped with: 2 x 1551 Twin-Headed Feeders (4 Stations) Cover feeder 1528 1 x 1565 Three-Knife Trimmer 1 x 1540 Stitching Unit Kdsdpfx Akjz Spb Hepou Belt delivery and OMG Cucciolo Stacker Location: France

Condition: excellent (used), Year of construction: 2003, Ref: 11164 . 2003 Muller Martini ‘Acoro A7’ Perfect Binder High speed perfect binding line (7,000 p/h) Comprising: 16 x 1573 top loading feeders + hand feed Ksdpfs Aa Atbex Akpedu M.M. ‘ASAC’ calliper control M.M. ASIR signature recognition Jogging unit 3643 and spiral raceway element 3641 M.M. 3614 reject unit M.M. Automatic motorised make-ready with “Commander” Control System. Programmable with data retrieval. Menu-guided set-up and on-the-run adjustment Book transfer section with main drive motor M.M. 3027-22 ‘Acoro A7’ binder with 22 clamps Spine preparation units with cutting/milling & notching/brushing Interchangeable glue tanks comprising; PUR spine glue pre-melt tank PUR spine gluing tank EVA hot-melt spine glue pre-melt tanks, 80 & 30 litre capacity, floor standing EVA hot-melt cam-controlled spine gluing tank on universal base EVA hot-melt cam-controlled side gluing tank on universal base Pile/rotary cover feeder with scoring Cover nipping station with 2 x nipping stations Lay-down delivery unit to; Spiral tower & conveyor system M.M. Zenith three knife trimmer to; Solema ‘Giove Speed’ Compensating book stacker Including accessories, tools & manuals. Accessories: BDM Book Measuring Station Specification: A7/24” Binder book sizes, Max: 510 x 320 mm Min: 140 x 100 mm Book thickness : 3 -- 60 mm Clamp opening, Max: 82 mm Open cover width : 203 - 642 mm Mechanical speed, Max: 7,000 cycles/hr.

Condition: excellent (used), Year of construction: 2007, operating hours: 15,700 h, functionality: fully functional, Equipment: compressor, documentation/manual, Müller Martin Sammelhefter Bravo Plus T comprising: 4 x double feeders 1555.0403 incl. ASIR, 1 x folding feeder 1529.0417, 1 x Semko 0333.0435 (year 2018), 1 x stitching machine 0380.0450, 1 x three-knife trimmer 0449.0430. Includes DruVa pumps, optional PIAB. Kodpjyamrlefx Akpjdu

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm Kdodpfx Aot Hw Iijkpsu total power requirement 45 kW weight of the machine ca. 5.500 kg

Year of construction: 2025, condition: used, Ribbon inserter Müller Martini Ribbon A 751 Age 2025 - for inline or offline operation - State-of-the-art servo technology replaces mechanica! cams and drivetrains - fully automated with amrys - operation via 1 HMI operating panel - runnig left to right - can be integrated in the Diamant Commander control console - operation trom the right Equipment: - lnfeed element for the mounting of a timed belt trom left or right - Vertical infeed channel - Timing of books with light barrier - Splitting of the book block in two positions via air jet - Ribbon inserting station standard for 1 or 2 ribbons - Ribbon positioning (pull-down) device for tight insertion of the ribbon into the spine - Vertical delivery channel with delivery to the left, horizontal delivery belt - Surcharge for belt with rolling knife edge for gentle transfer of sensitive products - Ribbon separation mechanism with heated cutter - Third ribbon - Conveyor system "Ribbon Bypass" General technica! data tor Ribbon: A751.8611 Max. mech. speed 3900 Cycles/h Size range: Book Block -min. WxHxT 70* x 11 0* x 5 mm -max. WxHxT 300 x 390* x 80 mm Ribbon -min. Wxl 3 x 200 mm -max. Wxl 8 x 530 mm * Size limitations see technica! data Connection values: - Electr. requirements: 2 kW - Compressed air requirements: 18 Nm3/h at 6 bar - Air requirements: clean and dry (pressure dew point 10°C be low ambient temperature) Kedpezgd Ensfx Akpjdu Net production output depends on paper, material, size, operator and climate conditions, etc.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 1298852, Opening 4-4, Products With or Without Overlap, Optical Scanning System, Additional Parts for Processing Thin Print, Max. Signature Length 510mm, Max. Speed 12,000/Hour, Mech. Speed 18-200 cycles per minute, max. Book Sizes, min. signature length 120 mm (4-3/4˝), max. signature length 510 mm (20-1/8˝), min. signature width 80 mm (3-1/8˝), max. signature width 320 mm (12-5/8˝), max. signature thickness 4 mm (5/32˝), Lap for sword opening min. 8 mm (5/16˝), high folio or low folio, Number of stitches standard 13, staggered 7, Stitch length 16.5 mm (2/3˝). Kodpfx Aoza Uxtskpodu

Condition: good (used), Year of construction: 2002, functionality: not functional, machine/vehicle number: 629013, Opening 4-4, products with or without an over fold, additional parts for processing thin printed sheets, max. signature length 510mm, max. speed 12,000/hour, mechanical speed 18-200 cycles per minute, max. book sizes, min. signature length 120 mm (4-3/4"), max. signature length 510 mm (20-1/8"), min. signature width 80 mm (3-1/8"), max. signature width 320 mm (12-5/8"), max. signature thickness 4 mm (5/32"), lap for sword opening min. 8 mm (5/16"), high folio or low folio, number of stitches standard 13, staggered 7, stitch length 16.5 mm (2/3"). Kdedpjza Uy Dsfx Akpju

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM Kedpfx Akjz I Eggepedu in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: ready for operation (used), Mitsubishi FREQROL FR-SE-2-7.5K-A-C spindle drive, serial number: 8602, with SE-PW power supply, serial number: 2776742L, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kdodpfx Akoz Ivv Eopju

Condition: used, Kartenkleber für Sammelhefter - Card Gluer for Saddle Stitcher Mueller Martini 315 Type C 422 Year 1996 - Serial-No. 99.12964 C 422 Robatech Gluning unit - 1 gluing noise Card Gluer for Saddle Stitcher Mueller Martini 300-321-335 Kdsdpfx Ajz H A Daekpsu Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MMFE 422132/35, Müller Martini 3631 CB-16, manufactured in 2001, compensating collator and stacker designed for the automatic stacking of bound books and printed materials. Kdjdpfx Ajz Dftfskpou Maximum size: 450 x 340 mm (varies by model version, up to 470 x 320 mm) Minimum size: 140 x 100 mm Product thickness: 3–70 mm Maximum speed: Up to 18,000 pieces per hour The machine is currently in production. The CPU battery needs to be replaced. After purchase, the machine will be dismantled and packed for delivery. The machine will be taken out of production in early 2027. Do not hesitate to contact us for more information.

Year of construction: 2013, condition: used, Sewing machine Müller Martini Ventura MC (3215) Year: 2013 Description: - Colour monitor with touch screen - Semi automatic setting Kedpfxsrmyp Rs Akpsdu - Feeder - ASIR Automatic Signature Image Recognition: Asir III - 2 + 2 opening possibilities - Book block separator - Book stacker - Roller table delivery - PIAB/Venturi

Condition: excellent (used), Year of construction: 2007, Ref: 10815 . 2007 Muller Martini 3215 Ventura High speed, fully automatic sewing machine Features: High range of product sizes Papers from 22 gsm Feeder and/or knife opening Innovative sewing system Patented loop formation with compressed air Quick change between different type of stitches Equipped with: Suction opening 4 + 4 for products with or without over fold Optical scanning system Additional parts for processing of thin printing Stacker delivery Max signature length: 510mm Max. speed: 12,000/hour Kodpfx Aot Sybcekpodu

Condition: excellent (used), Offer consisting of: Equipment Collating machine * Müller Martini ZTM 1571 with ASIR * 14 stations * Year of construction 2001 * 1 manual station * Outfeed gate 1572 (year of construction 2005) * 1 positioning element Perfect binder Acoro A5 * Milling and spine processing station * Hotmelt spine gluing unit with an 80-liter pre-melter * Hotmelt side gluing unit with an 18-liter pre-melter * Drum transfer feeder * Pressing station * Lay-down device * Drying section approx. 30 m Three-knife trimmer Müller Martini Merit-S * Year of construction 1998 * Infeed on the right * Pressing ram * Cutting cassettes No. 1–21 * 2 sets of knives Cross cutter CB-16 * Year of construction 1997 * Mobile base machine * Infeed belt with top belts * Turret for stack heights up to 240 mm * Pneumatic slide opening * Retractable ejector Additional equipment * Nordson PUR pre-melter (year of construction 2001) * PUR spine gluing unit * Special spine processing “Fibre Rougher” (new part) * Additional sets of knives for the three-knife trimmer Notes * Compressed air supply (6 bar), compressed air, vacuum and chip extraction required on site. * Inspection possible at any time by appointment. * Assistance with loading can be arranged. Kdjdpfxjzivbaj Akpeu

Condition: ready for operation (used), IN STOCK - Kdsdpfeir E Rxex Akpju 4/5th knife attachment for a Muller Martini DSS/890 trimer