Used Llc Professional Hd-Tieflöffel 420Mm *Ms10* for sale (7,644)

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; Ppodpsp Stgnefx Ahlet - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix Psdpfxeh Aw Rne Ahljpt The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Ppodpfey U Ignex Ahlot Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: ready for operation (used), functionality: fully functional, The VM400 HD Former is a high-performance solution designed to automate the shaping of food products with outstanding consistency. It integrates seamlessly into high-output production lines, especially within the meat, plant-based alternatives, and breaded products sectors. Thanks to its advanced technology, it provides uniform forming—even for dense or hard-to-process textures. Ppsdpfxswxaabj Ahljt Its conveyor system and precision mold enable the creation of uniform portions, while adhering to strict weight and shape requirements. As a result, it guarantees excellent product presentation, which enhances both batch consistency and end-customer satisfaction. Moreover, the VM400 HD offers significant flexibility: it can handle various formats by simply adapting the tooling. In addition, its intuitive control panel makes it easy to adjust production rates and pressure settings without downtime. The entire frame is constructed from stainless steel, ensuring optimal durability and rapid cleaning, in line with the industry’s strict hygiene standards. Choosing this machine means immediately boosting productivity and achieving consistent production, even during peak demand periods. Technical specifications: Cycle rate: up to 2,000 cycles/hour depending on the product Portion weight: adjustable from 30 to 250 g Dimensions: 1,300 x 850 x 1,600 mm (L x W x H) Power supply: 400 V – 50 Hz – 3-phase Materials: AISI 304 stainless steel frame with sanitary finish

Condition: good (used), servo motor, DC motor, servo gear motor, servo actuator, drive actuator, servo drive Podsvpffxjpfx Ahlept -Manufacturer: HD Harmonic Drive, Hi-T Drive SERVO ACTUATOR -Type: RH-8-3006-T-SP -Shaft: Ø 18 x 20 mm -Dimensions: 200/60/H65 mm -Weight: 1.0 kg

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Psdpjvlz Arofx Ahlopt Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2006, SpectruMedix RVL 9612 Genetic Analysis System incl. PC and accessories Ppsdpfxsxlrvxj Ahlst This device is suitable for molecular biology laboratories, research institutions, and universities for genetic analysis (e.g., DNA sequencing, genotyping). Model: RVL 9612 Manufacturer: SpectruMedix LLC, State College, PA, USA Serial Number: 1102 Revision: 2.0 Year of Construction / Date of Manufacture: March 17, 2006 Line Voltage: 115/230V Frequency: 50/60Hz Power Consumption: 3300W Phases: 1 (single-phase operation) Certifications: CE compliant (HCS CE-D) Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Find more items – new and used – in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 1993, functionality: fully functional, pressure: 10 bar, nominal heat output: 1,140 kW (1,549.97 HP), tank capacity: 1,740 l, manhole location: front, empty load weight: 4,200 kg, Industrial steam boiler LOOS U-HD-1600 in excellent condition for sale. With full documentation with Weishaupt G7/1-D gas burner Manufacturer: LOOS Gunzenhausen Type: U-HD 1600 Year of manufacture: 1993 Full inspection: 2017 Boiler capacity max.: 1600 kg/h Operating pressure: 10 bar Fire output: 1186 kW Gas burner: Weishaupt G7/1-D 300-1750kw Water capacity: 1740 liters Total heating surface: 31 m² Test pressure: 18 bar Increased test pressure: 18 bar Ppodpfxsym Tugo Ahlot Year of manufacture: 1993 Full documentation!!! length: 4 meters (including gas burner) Width: 2.2 meters Height: 2.3 meters Weight: 4200kg ca

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Ppodpfxjf Epzns Ahlst Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: new, Year of construction: 2026, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. So it lets the opportunity to bend thick metal in any part of bending machine without any damage. Ppodpfx Ahev Tyr Ieljt We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Podpfxsv T Uvzo Ahljpt Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: Podpfx Ajf Eywwohlopt -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: excellent (used), Loos U-HD 800kg/h 13Bar Ppjdpfxsu I Rw Ij Ahljt

Condition: excellent (used), Loos U-HD 4500kg/h 10Bar Psdpfx Aou I Rvdehlopt

Condition: excellent (used), Bosch U-HD 350 Kg/h. Bj2015 Weishaupt burner gas or oil possible Ppjdpfx Ajm Rhdyehlst

Condition: excellent (used), Loos U-HD 2000kg/h 16Bar Ppjdpfju I Rxlex Ahlot

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Podpfotp H Erox Ahlept Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: AVB-HELIX100ST4, total length: 6,500 mm, total width: 2,600 mm, total height: 3,500 mm, height adjustment type: mechanical, overall weight: 16,000 kg, compressed air connection: 8 bar, shaft diameter: 260 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, infeed height: 800 mm, control cabinet width: 600 mm, control cabinet length: 2,200 mm, control cabinet height: 2,000 mm, working length: 3,000 mm, workpiece width (max.): 800 mm, empty load weight: 16,000 kg, workpiece length (max.): 3,000 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 3,000 rpm, FEATURES OF THE WOOD SHAVING MACHINES  Bin size: 3000 mm  Hopper is equipped with the Speed Control System  The robust machine frame structure of single-piece steel construction  Heavy body structure against vibration caused by long-term use of the machine  Conveyor extraction: 1000 mm wide outfeed provided with a rubber band or PVC 4 mm thickness  Direct motor operation with an independent control panel with a digital screen,  PLC-controlled electric panel independent from the machine, minimum 5-6 meters away from the machine,  Can be operated with 380V 50-60 Hz (additional transformers can be added for foreign countries operating at different voltages, optional)  Adjustable knife heights and cutter heads  Possibility to adjust shavings thickness between 0,4 and 1,2 mm(for straight blade models)  Blades and speed can be varied to produce Large Flakes (Equestrian), Small Flakes (Poultry Layers), Fine flakes (Poultry Broilers)  To avoid downtime, a few sets of spare blades should be ordered together with each machine.  Shavings outlet: Gravity discharge from the cutter heads to the belt conveyor  easy cutter head blade adjustment system;  All cutter head blocks are moved out on the machine during the blade changing.  We are also supported by our customers with blade purchasing,  All parts used in our machines are CE certified and selected with the high-efficiency principle  Knives T.C.T. Carbide 14*14*2,0 mm CERATIZIT Made in EU, bearings COC, motors use the highest quality Turkish or imported products (WEG, SIEMENS, optional).  Automatic lubrication system for the whole machine's essential parts  All machines will be CE standards Podpfjgmbtqox Ahlopt  The hydraulic system will work with the proportional valve.  Double-armed hydraulic system for the extra power of heavy-duty work  Control panel designed with Mitsubishi Electric, AB (Allen Bradley), Siemens, Schneider, or ABB  Modem Ethernet connection for the main company  The wood shaving machine output will be on the right side or the left side  digital display screen for control in one touch  All blades Diamond 14*14 mm or 15*15 mm, 500 pcs long-life blades  Directly mounted to the cutter head for all-electric motors to prevent losing power  Specially produced spiral helix mobile roller system with a T.C.T. carbide knife (first and only in Turkey)  Separate the control panel and the user interface panel TECHNICAL SPECIFICATIONS Number of Cutterheads 4 Length of Cutter Head 100 cm Number of Blades 500 Carbide/cutter head Power Supply 4 *37 KW = 148 KW (198,5 HP) Hopper Working Stationery Hopper Dimensions mm 3100*1200*1000 Working Voltage 380 V-400V-460V-560V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 22-30 KW Total Power 181 KW Cutterhead Speed 2800 rpm Cutterhead Diameter 230 mm Shaving Depth 0,03 mm - 0,05 mm Max.Log Input Length 150-300 cm Max.Log Input Width 10-90 cm Working Distance 2200 mm Machine Dimensions L6450 x H3014 x W2514 mm Weight 17.000 Kg Production capacity: 4.500-5.000 kg/h

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. Ppsdpfx Ahoxghngjlst The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process with the lock forming machine LFM. After the process of locks forming are finished it’s necessary to put single hem lock into Pittsburgh lock and close it with a hummer or special Pittsburgh lock closing machine. After those procedures ventilation element is ready It’s very easy to work with our ventilation lock former machine LFM, because there are ruler guides so they help you to put metal in necessary forming position. Lock former machine LFM can be 380V (1.5kW engine power) or 220V (1.1-1.5kW engine power) depends on customer’s preferences. The machine is suited to work with color-coated metal sheets or stainless steel. We have been producing lock forming ventilation machines since 2008 year. So we have ready solutions for you to be the first Ppjdpfjf Epzcjx Ahlot Dimension: 110.00Sm x 51.00Sm x 100.00Sm Weight: 300.00Kg Maximum metal thickness: 1.2mm

Condition: new, Year of construction: 2025, Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Main Technical Data: Size: 1600x850x1000mm Weight: 250 kg Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Forming Steps: 6 steps Forming Steel Thickness: 0.4-0.7mm Forming Aluminum Thickness: 0.7-1.0mm Height of Roofing: 25mm Material Width: 250-700mm Tolerance: +-1mm Ppsdpfxsf Ih Hce Ahlot Roller material: high grade 45# Material of principal axes: high grade 45# steel For this price we offer roll former roofing machine F3 +cross cutting knife +rolls for ribbed panels also you can get: - Rolls for ribbed panels - Floor decoiler - Hand seamers - Electric seaming machine -Punching press for clips Dimension: 160.00Sm x 85.00Sm x 100.00Sm Weight: 280.00Kg

Condition: new, Year of construction: 2023, Cut-to-length line 1250mm x2mm x10 t for cross cutting of coil metal with maximum width 1250mm, maximum metal thickness 2mm and maximum coil weight 10 tons. Line can be equipped with acceptance part with moving support for stainless steel or as standard acceptance table. As an option we can offer used machines for your requirements. Psdpfxjqlbpgj Ahljpt Also we produce slitting lines, roll forming lines. tube mills and other sheet metal and coil metal processing machinery

Condition: new, Year of construction: 2025, Metal hemming machine HR-2 Metal hemming machine HR-2 is the next model in the production line after hemming roll former HR-1 model. Instead of HR-1 machine that can form 5-8 mm hem lock, metal hemming machine HR-2 can make 6-14 mm hem. Therefore, customer can get better products range depends on requirements, seven forming stands of machine makes it possible. Metal hemming machine HR-2 can make common sheet metal processing operation goes much more easier, with better quality and same repeatability. In standard way such operation can be perform with manual sheet metal bending machine, so two workers have to make bends step by step to get necessary product. Metal hemming machine HR-2 can make such operation much more efficiently. You can roll both sides simultaneously or each side step by step. To make it gradually can be good idea when you have large variety of elements you need to produce with different widths so no reason to readjust width of machine for each operation. We use special tool steel to make rolls of machine so can provide longtime living period. Pjderklxvspfx Ahlopt Hemming rollformer HR-2 can make unlimited length panels and make customer’s work much easier. Therefore, you can save a lot of time with our metal hemming machine HR-2 and make your production process much more efficient.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. Ppedeuzv Tzspfx Ahlet After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Ppsdjwwip Aspfx Ahlet Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15